Free BTC transaction accelerator!

[Charles-Tim]

Are you still active in this thread? I have a transaction that has been suspended for hours and I hope you can help me speed it up
My txt: af39244c8e8c95220b22f1f32d7d95bd50ab76e07ce5586a9e88729bc23c0d1b

thank you!

Your transaction is having a fee of 1 sat/vbyte, it support replace-by-fee, pump it to around 5 to 10 sat/vbyte. No free acceleratator can help you accelerate the transaction as ViaBTC can only accelerate transactions with at least a fee of 10 sat/byte which is still enough to get a transaction confirmed this time around.

[1715010722]

1715010722

[1715010722]

1715010722

[1715010722]

1715010722

[1715010722]

1715010722

[ChuckBuck]

Your transaction is 1 sat/vbyte, it support replace-by-fee, pump it to around 5 to 10 sat/vbyte. No free acceleratator can help you accelerate the transaction as ViaBTC will can only accelerate transactions with at least a fee of 10 sat/byte which is still enough to get a transaction confirmed this time around.

I really don't know why this happened, I was even surprised by it. Today, I open electrum to make my trade, everything is set as before, I just don't understand why fees are so low. I usually make trades with average fee, but today it was at its lowest without my influence, strangely, it is at 0.08$ when i press execute button. I don't think I can cancel the transaction and make another one, maybe?

[Drazdruz]

Sir ,kindly help me to Accelerate my bitcoin transaction ,,Emergency please

e76b47bb72bd8c6015337b6f4fdeafdb6a7d92d651b94271de4bbbaa28459d4b

[Charles-Tim]

I really don't know why this happened, I was even surprised by it. Today, I open electrum to make my trade, everything is set as before, I just don't understand why fees are so low. I usually make trades with average fee, but today it was at its lowest without my influence, strangely, it is at 0.08$ when i press execute button. I don't think I can cancel the transaction and make another one, maybe?

This can happen when the mempool is not congested at all. Your transaction support replace-by-fee, which means you can pump the fee. Click on your unconfirmed transaction on electrum, you will see where you can pump the fee, click on it and pump it. This will increase the feerate to the amount you adjusted it to.

[ChuckBuck]

This can happen when the mempool is not congested at all. Your transaction support replace-by-fee, which means you can pump the fee. Click on your unconfirmed transaction on electrum, you will see where you can pump the fee, click on it and pump it. This will increase the feerate to the amount you adjusted it to.

ya, hope I do it right

new txt here, should i claim speedup with this new txt? I increased it to the minimum you mentioned above. Honestly, 0.9$ for transaction fee is still too cheap right now 

[Charles-Tim]

should i claim speedup with this new txt? I increased it to the minimum you mentioned above. Honestly, 0.9$ for transaction fee is still too cheap right now 

10 sat/vbyte is okay, and if not confirmed in time, you can still pump it further. But 10 sat/vbyte should be good.

[ChuckBuck]

10 sat/vbyte is okay, and if not confirmed in time, you can still pump it further. But 10 sat/vbyte should be good.

It's been three hours and the transaction is still unconfirmed, maybe I really need Lucius' help, but it looks like he's not online now  i will try to wait a few more hours, if i keep increasing the fee, the transaction will be done again right? I'm wondering because it might take more time

[Charles-Tim]

It's been three hours and the transaction is still unconfirmed, maybe I really need Lucius' help, but it looks like he's not online now  i will try to wait a few more hours, if i keep increasing the fee, the transaction will be done again right? I'm wondering because it might take more time

I will advice you to wait, but if you need the recent mempool feerate that can get your transaction confirmed in the next block, you can check https://mempool.space for that, the feerate that can get you transaction confirm in the next block is around 35 sat/vbyte. But I will advice you to wait if you are not in a hurry.

To use ViaBTC free acceleratator, you will still need to increase your transaction fee to around 20 sat/vbyte because you are using segwit address to send to segwit address, the minimum fee of a transaction before ViaBTC free acceleratator can be used is 10 sat/byte, using native segwit address will let it be around 20 sat/vbyte to be used as fee, so Lucius will be able to help you accelerate it at around 20 sat/vbyte. Or pump it to around 35 sat/vbyte, it will be confirmed in the next block or sooner.

[Timelord2067]

These surges over the last couple of weeks don't last too long - I know it might be painful to wait for many hours to have your funds cleared, but the mempool has been draining away to nothing quite quickly.

Keep an eye on the progress of the mempool and the blocks found on the block-chain at https://mempool.space/

[ChuckBuck]

I will advice you to wait, but if you need the recent mempool feerate that can get your transaction confirmed in the next block, you can check https://mempool.space for that, the feerate that can get you transaction confirm in the next block is around 35 sat/vbyte. But I will advice you to wait if you are not in a hurry.

These surges over the last couple of weeks don't last too long - I know it might be painful to wait for many hours to have your funds cleared, but the mempool has been draining away to nothing quite quickly.
Keep an eye on the progress of the mempool and the blocks found on the block-chain at https://mempool.space/

ya, I'll keep waiting, actually I'm not in a hurry, but you know, BTC is still in correction and I really don't know which way it's going to move  I am also going to bed, this means that I am about to go to bed nervous (even though the amount I send is only a small amount  ). Anyway, I'll ignore it for now.

You guys have really great expertise! I don't often learn about things like that, maybe there are not many traders with this knowledge, only real BTC enthusiasts like you  Thank!

[Text]

How about this one guys?

cc4c396f66b765648a36a345069de81f4743757013bbde05022025dc80915511

What if I ever want to use RBF?  How is the process because I use Trust wallet?  Does it also need to be imported into electrum first?  In case I don’t have that on the laptop yet. It is not possible on mobile because the trust wallet does not provide a private key, only seed phrases.

[Charles-Tim]

I checked your transaction has not yet been confirmed, can you increase the fee to 30 sat/vbyte so it can be confirmed very early. Make sure you check mempool.space for the best fee. But if you wait, the transaction will be confirmed during this weekend because mempool will be less congested.

How about this one guys?

cc4c396f66b765648a36a345069de81f4743757013bbde05022025dc80915511

What if I ever want to use RBF?  How is the process because I use Trust wallet?  Does it also need to be imported into electrum first?  In case I don’t have that on the laptop yet. It is not possible on mobile because the trust wallet does not provide a private key, only seed phrases.

Did you make the transaction using Trustwallet? I doubt that. The transaction support replace-by-fee, which is most likely you used electrum or other supported wallet, and you will be able to pump the fee on he wallet used. But I do not think trust wallet support replace-by-fee, but we should leave any doubt. All you will need to do is to import your seed phrase on electrum wallet, make sure you select the derivational path of the address type you used for the transaction which is p2sh-p2wpkh (segwit).

Download electrum from https://electrum.org and verify its signature, to learn more about how to download and verify electrum wallet signature, you can use this guild.

Open electrum, click on next > standard wallet > I already have a seed > input your seed phrase > checked the BIP39 seed > and click on next > select p2sh-p2wpkh > click on next. The wallet will synchronize with the blockchain and you will be able to see your unconfirmed transaction, click on it, press on pump fee, you will be able to pump the fee. 25 to 35 sat/vbyte will be a good fee used now.

[Lucius]

Sir ,kindly help me to Accelerate my bitcoin transaction ,,Emergency please
e76b47bb72bd8c6015337b6f4fdeafdb6a7d92d651b94271de4bbbaa28459d4b

Unfortunately, I can't help you - your fee is too low for this accelerator.


@ChuckBuck, even if I was online I couldn't help you because you set a low fee both times - as you've already read vbyte and byte are not the same - and if you have a new transaction that meets the conditions, I'll be happy to help.

How about this one guys?
cc4c396f66b765648a36a345069de81f4743757013bbde05022025dc80915511

Also too low fee, which means I will have to edit the title to prevent further confusion...

[ChuckBuck]

I checked your transaction has not yet been confirmed, can you increase the fee to 30 sat/vbyte so it can be confirmed very early. Make sure you check mempool.space for the best fee. But if you wait, the transaction will be confirmed during this weekend because mempool will be less congested.

@ChuckBuck, even if I was online I couldn't help you because you set a low fee both times - as you've already read vbyte and byte are not the same - and if you have a new transaction that meets the conditions, I'll be happy to help.

I'm not sure I can keep waiting, it would be bad if this deal lasted until the end of the week. So, now I should increase the transaction fee, again, right? How much do I need to increase it so it can be supported by the accelerator or at least can be confirmed by tomorrow? I have no experience here  looks like I need about 31sat/vB to complete the transaction sooner right?

[Charles-Tim]

I'm not sure I can keep waiting, it would be bad if this deal lasted until the end of the week. So, now I should increase the transaction fee, again, right? How much do I need to increase it so it can be supported by the accelerator or at least can be confirmed by tomorrow? I have no experience here  looks like I need about 31sat/vB to complete the transaction sooner right?

Increase it to 20 sat/vbyte, this will amounts to over 10 sat/byte which is the minimum fee that a transaction can have to be able to make use of ViaBTC free acceleratator. Or you can increase it to 28 sat/vbyte which can make your transaction confirmed in time (most probably in the next block) without even accelerating it.

[Charles-Tim]

Your newly txid is 8dc8bb0a0c42329a1cb9a4c530968ac16a97083c53b4b93415d5638d9c2c9b40

The transaction has been successfully accelerated via ViaBTC



https://www.blockchain.com/btc/block/687072. Probably acceleratated with the help of Lucius.

[Lucius]

Probably acceleratated with the help of Lucius.

I have nothing to do with that transaction - and if you tried to speed it up, then you succeeded

[ChuckBuck]

oh men, I realized I misunderstood Charles-Tim's point at first when I increased the fee to 10 sat/vB and I didn't know that it was somewhere around 5 sat/B  I started to wonder when Lucius said I can't speed up this transaction. I can finally figure it out, I changed the transaction fee again, looks like it's on the right path, the transaction has been completed now 

I really thank you both very much, especially Charles-Tim. Thank you again for guiding me through everything from yesterday until now! I love you guys 

[Lucius]

Given the state of mempool and the current high priority rate (in sats) I can try to speed up your transaction with this free accelerator. Please read the terms and conditions so that the transaction could be considered at all, and that the matter is extremely time-sensitive so I cannot promise more than 1 or 2 successful accelerations every full hour.

The volume of a single transaction must be ≤0.5 KB, and the transaction fee rate should be ≥ 0.0001 BTC/KB.

For those who will claim it doesn't work :


https://www.blockchain.com/btc/tx/13da2cce4770e5dab253065cf00ff8aba61b40de6748a23ae7478e8094ae9a91

[TeenWolf80]

Hi, Lucius. I’ve got two transactions stuck in limbo. If you can help with just one, I’ll be your friend for life.


aa6183eb476f2b41ae98893e4a55b8d7dc80e068e3c731f8d11516e9c982eb20

85dcef97d8e99491201c577e9165f328c4def1a749c7b26369561aa056d6e37b