2021-05-05 17:18:18:power_api.c:322:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-05-05 17:18:38:driver-btm-api.c:908:check_asic_number_with_power_on: Chain[1]: find 78 asic, times 0
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-05-05 17:18:42:driver-btm-api.c:908:check_asic_number_with_power_on: Chain[2]: find 78 asic, times 0
2021-05-05 17:18:42:power_api.c:388:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
2021-05-05 17:19:01:driver-hash-chip.c:451:set_uart_relay: set uart relay to 0x330003
chain 1 domain 0: d0 0.402, d1 0.396, d2 0.394, d3 0.308, sum = 1.499634
chain 1 domain 1: d0 0.402, d1 0.396, d2 0.417, d3 0.285, sum = 1.499634
chain 1 domain 2: d0 0.393, d1 0.378, d2 0.391, d3 0.338, sum = 1.499634
chain 1 domain 3: d0 0.378, d1 0.378, d2 0.384, d3 0.360, sum = 1.499634
chain 1 domain 4: d0 0.374, d1 0.372, d2 0.357, d3 0.383, sum = 1.485718
chain 1 domain 5: d0 0.374, d1 0.379, d2 0.375, d3 0.363, sum = 1.491577
chain 1 domain 6: d0 0.418, d1 0.422, d2 0.414, d3 0.245, sum = 1.499634
chain 1 domain 7: d0 0.376, d1 0.374, d2 0.373, d3 0.368, sum = 1.491577
chain 1 domain 8: d0 0.359, d1 0.360, d2 0.354, d3 0.357, sum = 1.430054
chain 1 domain 9: d0 0.359, d1 0.359, d2 0.354, d3 0.328, sum = 1.400024
chain 1 domain 10: d0 0.322, d1 0.327, d2 0.312, d3 0.323, sum = 1.282837
chain 1 domain 11: d0 0.398, d1 0.379, d2 0.393, d3 0.329, sum = 1.499634
chain 1 domain 12: d0 0.403, d1 0.398, d2 0.394, d3 0.304, sum = 1.499634
chain 2 domain 0: d0 0.402, d1 0.397, d2 0.396, d3 0.305, sum = 1.499634
chain 2 domain 1: d0 0.389, d1 0.372, d2 0.380, d3 0.356, sum = 1.498169
chain 2 domain 2: d0 0.380, d1 0.373, d2 0.389, d3 0.352, sum = 1.494507
chain 2 domain 3: d0 0.367, d1 0.359, d2 0.380, d3 0.337, sum = 1.443237
chain 2 domain 4: d0 0.379, d1 0.388, d2 0.386, d3 0.347, sum = 1.499634
chain 2 domain 5: d0 0.379, d1 0.379, d2 0.376, d3 0.362, sum = 1.495972
chain 2 domain 6: d0 0.393, d1 0.383, d2 0.380, d3 0.343, sum = 1.499634
chain 2 domain 7: d0 0.371, d1 0.371, d2 0.384, d3 0.366, sum = 1.493042
chain 2 domain 8: d0 0.367, d1 0.376, d2 0.362, d3 0.345, sum = 1.449463
chain 2 domain 9: d0 0.392, d1 0.394, d2 0.389, d3 0.324, sum = 1.499634
chain 2 domain 10: d0 0.387, d1 0.387, d2 0.383, d3 0.343, sum = 1.499634
chain 2 domain 11: d0 0.375, d1 0.377, d2 0.354, d3 0.372, sum = 1.478027
chain 2 domain 12: d0 0.376, d1 0.376, d2 0.375, d3 0.365, sum = 1.492310
2021-05-05 17:19:02:driver-hash-chip.c:839:set_ldo_ctrl: Set LDO to 0x2000203
2021-05-05 17:19:02 voltage[1] = 1800
2021-05-05 17:19:02 voltage[2] = 1800
2021-05-05 17:19:02:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1800
2021-05-05 17:19:03:temperature.c:305:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218
2021-05-05 17:19:05:temperature.c:305:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218
2021-05-05 17:19:05:uart.c:69:set_baud: set UART baud to 12000000
2021-05-05 17:19:06:driver-btm-api.c:240:check_bringup_temp: Bring up temperature is 36
2021-05-05 17:19:06:thread.c:848:create_check_miner_status_thread: create thread
2021-05-05 17:19:06:thread.c:838:create_show_miner_status_thread: create thread
2021-05-05 17:19:06:thread.c:818:create_temperature_monitor_thread: create thread
2021-05-05 17:19:06:sweep.c:1168:sweep_get_max_freq: max_freq_with_diff = 720
2021-05-05 17:19:06:frequency.c:473:inc_freq_with_fixed_vco: chain = 255, freq = 570, is_higher_voltage = true
2021-05-05 17:19:06:power_api.c:400:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-05-05 17:19:29:power_api.c:400:set_to_voltage_by_steps: Set to voltage raw 2000, step by step.
2021-05-05 17:19:44:power_api.c:400:set_to_voltage_by_steps: Set to voltage raw 1920, step by step.
2021-05-05 17:19:53:power_api.c:400:set_to_voltage_by_steps: Set to voltage raw 1880, step by step.
2021-05-05 17:20:02:power_api.c:400:set_to_voltage_by_steps: Set to voltage raw 1830, step by step.
2021-05-05 17:20:12:frequency.c:508:inc_freq_with_fixed_step: chain = 1, freq_start = 570, freq_end = 570, freq_step = 5, is_higher_voltage = true
2021-05-05 17:20:12:frequency.c:508:inc_freq_with_fixed_step: chain = 2, freq_start = 570, freq_end = 570, freq_step = 5, is_higher_voltage = true
2021-05-05 17:20:12:frequency.c:347:inc_asic_diff_freq_by_steps: chain = 1, start = 570, freq_step = 5
2021-05-05 17:20:17:thread.c:630:check_temperature: over max temp, pcb temp 67 (max 85), chip temp 101(max 98) pcb temp rise 0 (max 13) chip temp rise 6 (max 15)
2021-05-05 17:20:17:driver-btm-api.c:198:set_miner_status: ERROR_TEMP_TOO_HIGH
2021-05-05 17:20:17:driver-btm-api.c:139:stop_mining: stop mining: over max temp
2021-05-05 17:20:17:thread.c:868:cancel_temperature_monitor_thread: cancel thread
2021-05-05 17:20:17:thread.c:878:cancel_read_nonce_reg_thread: cancel thread
2021-05-05 17:20:17:driver-btm-api.c:124:killall_hashboard: ****power off hashboard****