kimjpeck
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 14, 2024, 02:58:42 PM Last edit: July 15, 2024, 09:27:05 AM by kimjpeck |
|
Hi Apollo Support,
I received a new Apollo 2 (Full Node) on Wednesday and it has finally finished syncing (Hash Rate 0 during sync).
No matter what I do (start, stop, reboot, pool, solo, eco, balanced) the miner sits at 0 h/s
I have checked ckpool and there is no hash rate being displayed.
I have download a fresh image (MC2) and setup with a new SDCard and still the same issue.
Front Status Light is flashing white.
regards
Kim
0.00 H/s
0.00 H/s - 1 hour average
0°C - Miner temperature 42°C - System temperature 0% - Hardware errors
0 watts - Power Usage
5% - CPU usage 31.38% - Memory usage 47.76% - System disk usage
Current block - 852,150
Details
04:22 - Minutes since last block 619.52 GB - Blockchain size 617.15 EH/s - Network hashrate About 79 trillion Difficulty 31/32 - Connections 30.73% - Remaining space
futurebit@futurebit-apollo-2:/dev$ sudo screen -dr miner
*** BOARDS STAT DELTA (10 secs, 1 boards, 44 chips): BRD SOL ERR bySol E/S byJobs CR mW/GHs EPWC 0 0 0 0 GH/s 0% 0 GH/s 0 0.00 4
*** BOARDS STAT TOTAL (878 secs, 1 boards, 44 chips): BRD SOL ERR bySol E/S byJobs CR mW/GHs EPWC 0 0 0 0 GH/s 0% 0 GH/s 0 0.00 4
*** MASTER STATS PER INTERVAL: INTERVAL sec bySol byDiff byPool byJobs CHIP GHs mW/GHs SOL ERR ERR(%) CR 30 sec 10s 0.0 0.0 0.0 0.0 0.00 0.00 0 0 0.0% 0 5 min 100s 0.0 0.0 0.0 0.0 0.00 0.00 0 0 0.0% 0 15 min 302s 0.0 0.0 0.0 0.0 0.00 0.00 0 0 0.0% 0 1 hour 878s 0.0 0.0 0.0 0.0 0.00 0.00 0 0 0.0% 0 total 878s 0.0 0.0 0.0 0.0 0.00 0.00 0 0 0.0% 0
*** MASTER STATS: Date: 2024-07-14 12:47:56, UpTime: 878 secs, mbHwVer: 0x0, osc: 0 Smooth osc: step: 1, ignore broken pwc: 0 Found boards: 1 Broken SPI: 1
*** POOL STATS: Pool: host:port: solo.ckpool.org:3333, user: *******************.Apollo2, diff: 10000, reconnects: 1 extraNonce1: 942d6d72, extraNonce2Size: 8, jobs: 9, rollingEnabled: 1, rollingMask: 1fffe000 INTERVAL sec JOBS clean SHARES ok err POOL sol minRespT avgRespT maxRespT loss INSERVICE % 30 sec 10s 1 0 0 0 0 0 0 0 0 0.0% 10s 100.0% 5 min 100s 4 0 0 0 0 0 0 0 0 0.0% 101s 100.0% 15 min 302s 11 1 0 0 0 0 0 0 0 0.0% 302s 100.0% 1 hour 878s 32 3 0 0 0 0 0 0 0 0.0% 878s 99.9% total 878s 32 3 0 0 0 0 0 0 0 0.0% 878s 99.9%
*** EVENT STATS: Legend: SE - subbsribe error (initialising issue) DIFF - diff changes, REC - reconnects, RECE - reconnects on error SHARES - sent to pool, PSS - pwc shares sent, PSD - pwc shares dropped MRS - master received shares, DJS - default job shares SJS - stale job shares, DUP - duplicates, LDS - low diff shares BDS - big diff shares, BTS - below target shares PR - pwc restart, SO - stat overflow INTERVAL sec SE DIFF REC RECE SHARES PSS PSD MRS DJS SJS DUP LDS BDS BTS PR SO 30 sec 10s 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 min 100s 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 15 min 302s 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 hour 878s 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 total 878s 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
FAN INFO: Slave RPM 0 1480
Temp(C) (min/avr/max): 0 / 0 / 0
*** MASTER-SLAVE SPI BUS STATS: SLAVE UID B-LEN B-CRC-C B-CRC-L VER TIME PING M=>S rx err % S=>M rx err % SS SD SR Rst LastRstT Packets Time msec. Speed(pack./sec) 0 3D0063001251323532343337 0 00000000 00000000 0x13160100 886 343 4660 4639 20 0.4% 6114 5979 135 2.2% 0 0 0 0 0
Total packets: 4660 in 864882 ms, speed: 5.39 packets/sec Exporting stat... [done]
|
|
|
|
boonleng
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 14, 2024, 04:40:36 PM |
|
I'm attempting to make the unit even quieter, I don't really mind lowering my hash rate. I found the system service `futurebit-miner-v2`, what are the actual limits of these parameters? The UI configuration only allows up to -brd_ocp 30 -osc 25 -fan_temp_low 69 -fan_temp_hi 89.
|
|
|
|
tarator40
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 14, 2024, 07:40:04 PM |
|
FYI - It would appear the "[GraphQL error]: Message: Int cannot represent non 32-bit signed integer value: ..." problem is still alive and well in v2.0.5. I've had my Apollo 2 for a couple of days now and it has v2.0.5 installed. I'm not sure if the "other overflow bug" you mentioned is the same issue, related, or different - but it would seem to have the same error message? In any case, I can only say that I'm using HTTP / web browser on the network and not a dedicated monitor & keyboard to the unit (if that makes a difference I don't know). I've tried both Windows 11 and Linux Mint with Firefox and Brave browsers on both machines and have the same issue after about 4-5 minutes. I've tried the reboot suggestion and again after 4-5 minutes the same error. This is just an FYI as it doesn't seem to actually be disconnecting the miner as you already clarified, although it is annoying, especially when it pops up back-to-back for 1-2 minutes and then goes away for a few minutes and then comes back to taunt me some more - lol. I am experiencing the same issue. Also using the unit in headless mode (no monitor/kbd - web only). Workaround is to restart the miner process. However you cannot do it via the web UI. Login via ssh and then: sudo /opt/apolloapi/backend/apollo-miner/miner_stop.sh sudo /opt/apolloapi/backend/apollo-miner/miner_start.sh ignore the errors ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
PennyBit
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 14, 2024, 10:02:28 PM |
|
FYI - It would appear the "[GraphQL error]: Message: Int cannot represent non 32-bit signed integer value: ..." problem is still alive and well in v2.0.5. I've had my Apollo 2 for a couple of days now and it has v2.0.5 installed. I'm not sure if the "other overflow bug" you mentioned is the same issue, related, or different - but it would seem to have the same error message? In any case, I can only say that I'm using HTTP / web browser on the network and not a dedicated monitor & keyboard to the unit (if that makes a difference I don't know). I've tried both Windows 11 and Linux Mint with Firefox and Brave browsers on both machines and have the same issue after about 4-5 minutes. I've tried the reboot suggestion and again after 4-5 minutes the same error. This is just an FYI as it doesn't seem to actually be disconnecting the miner as you already clarified, although it is annoying, especially when it pops up back-to-back for 1-2 minutes and then goes away for a few minutes and then comes back to taunt me some more - lol. I am experiencing the same issue. Also using the unit in headless mode (no monitor/kbd - web only). Workaround is to restart the miner process. However you cannot do it via the web UI. Login via ssh and then: sudo /opt/apolloapi/backend/apollo-miner/miner_stop.sh sudo /opt/apolloapi/backend/apollo-miner/miner_start.sh ignore the errors ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Thanks for the suggestion. I'm assuming you are on v2.0.5 as well which would indicate that the bug did not get fixed from v2.0.4.
|
|
|
|
tarator40
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2024, 08:05:35 AM Last edit: July 15, 2024, 05:33:06 PM by tarator40 |
|
FYI - It would appear the "[GraphQL error]: Message: Int cannot represent non 32-bit signed integer value: ..." problem is still alive and well in v2.0.5. I've had my Apollo 2 for a couple of days now and it has v2.0.5 installed. I'm not sure if the "other overflow bug" you mentioned is the same issue, related, or different - but it would seem to have the same error message? In any case, I can only say that I'm using HTTP / web browser on the network and not a dedicated monitor & keyboard to the unit (if that makes a difference I don't know). I've tried both Windows 11 and Linux Mint with Firefox and Brave browsers on both machines and have the same issue after about 4-5 minutes. I've tried the reboot suggestion and again after 4-5 minutes the same error. This is just an FYI as it doesn't seem to actually be disconnecting the miner as you already clarified, although it is annoying, especially when it pops up back-to-back for 1-2 minutes and then goes away for a few minutes and then comes back to taunt me some more - lol. I am experiencing the same issue. Also using the unit in headless mode (no monitor/kbd - web only). Workaround is to restart the miner process. However you cannot do it via the web UI. Login via ssh and then: sudo /opt/apolloapi/backend/apollo-miner/miner_stop.sh sudo /opt/apolloapi/backend/apollo-miner/miner_start.sh ignore the errors ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Thanks for the suggestion. I'm assuming you are on v2.0.5 as well which would indicate that the bug did not get fixed from v2.0.4. Yes - using 2.0.5. I assume it's a counter variable bug in the UI code. When some miner stat grows above a certain value - the UI gets broken and cannot properly handle it. However, I am not sure whether we get any mining penalty by restarting the miner every couple of days...
|
|
|
|
PennyBit
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2024, 07:50:51 PM |
|
FYI - It would appear the "[GraphQL error]: Message: Int cannot represent non 32-bit signed integer value: ..." problem is still alive and well in v2.0.5. I've had my Apollo 2 for a couple of days now and it has v2.0.5 installed. I'm not sure if the "other overflow bug" you mentioned is the same issue, related, or different - but it would seem to have the same error message? In any case, I can only say that I'm using HTTP / web browser on the network and not a dedicated monitor & keyboard to the unit (if that makes a difference I don't know). I've tried both Windows 11 and Linux Mint with Firefox and Brave browsers on both machines and have the same issue after about 4-5 minutes. I've tried the reboot suggestion and again after 4-5 minutes the same error. This is just an FYI as it doesn't seem to actually be disconnecting the miner as you already clarified, although it is annoying, especially when it pops up back-to-back for 1-2 minutes and then goes away for a few minutes and then comes back to taunt me some more - lol. I am experiencing the same issue. Also using the unit in headless mode (no monitor/kbd - web only). Workaround is to restart the miner process. However you cannot do it via the web UI. Login via ssh and then: sudo /opt/apolloapi/backend/apollo-miner/miner_stop.sh sudo /opt/apolloapi/backend/apollo-miner/miner_start.sh ignore the errors ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Thanks for the suggestion. I'm assuming you are on v2.0.5 as well which would indicate that the bug did not get fixed from v2.0.4. Yes - using 2.0.5. I assume it's a counter variable bug in the UI code. When some miner stat grows above a certain value - the UI gets broken and cannot properly handle it. However, I am not sure whether we get any mining penalty by restarting the miner every couple of days... Sir, I believe you are correct. Also, I found another much longer ["GraphQL" error with more textual information] which happens when I just have the node running (or once when I started the node with the miner already running) but it is very scarce and random, although from what I have been able to read before it disappears it has similar text throughout the error. I will start trying to capture it in the future - but it is random as heck - lol. Just a note for readers - this is all a headless operation on v2.0.5 and may not affect direct connections with monitors/keyboards. I don't know for sure - but feedback would be welcome.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2024, 12:10:24 AM |
|
FYI - It would appear the "[GraphQL error]: Message: Int cannot represent non 32-bit signed integer value: ..." problem is still alive and well in v2.0.5. I've had my Apollo 2 for a couple of days now and it has v2.0.5 installed. I'm not sure if the "other overflow bug" you mentioned is the same issue, related, or different - but it would seem to have the same error message? In any case, I can only say that I'm using HTTP / web browser on the network and not a dedicated monitor & keyboard to the unit (if that makes a difference I don't know). I've tried both Windows 11 and Linux Mint with Firefox and Brave browsers on both machines and have the same issue after about 4-5 minutes. I've tried the reboot suggestion and again after 4-5 minutes the same error. This is just an FYI as it doesn't seem to actually be disconnecting the miner as you already clarified, although it is annoying, especially when it pops up back-to-back for 1-2 minutes and then goes away for a few minutes and then comes back to taunt me some more - lol. I am experiencing the same issue. Also using the unit in headless mode (no monitor/kbd - web only). Workaround is to restart the miner process. However you cannot do it via the web UI. Login via ssh and then: sudo /opt/apolloapi/backend/apollo-miner/miner_stop.sh sudo /opt/apolloapi/backend/apollo-miner/miner_start.sh ignore the errors ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Thanks for the suggestion. I'm assuming you are on v2.0.5 as well which would indicate that the bug did not get fixed from v2.0.4. Yes - using 2.0.5. I assume it's a counter variable bug in the UI code. When some miner stat grows above a certain value - the UI gets broken and cannot properly handle it. However, I am not sure whether we get any mining penalty by restarting the miner every couple of days... Sir, I believe you are correct. Also, I found another much longer ["GraphQL" error with more textual information] which happens when I just have the node running (or once when I started the node with the miner already running) but it is very scarce and random, although from what I have been able to read before it disappears it has similar text throughout the error. I will start trying to capture it in the future - but it is random as heck - lol. Just a note for readers - this is all a headless operation on v2.0.5 and may not affect direct connections with monitors/keyboards. I don't know for sure - but feedback would be welcome. This has been fixed on dev, finally got to the source of all the 32bit errors. Should push 2.0.6 soon.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2024, 12:11:25 AM |
|
Hi Apollo Support,
I received a new Apollo 2 (Full Node) on Wednesday and it has finally finished syncing (Hash Rate 0 during sync).
No matter what I do (start, stop, reboot, pool, solo, eco, balanced) the miner sits at 0 h/s
I have checked ckpool and there is no hash rate being displayed.
I have download a fresh image (MC2) and setup with a new SDCard and still the same issue.
Front Status Light is flashing white.
*** MASTER-SLAVE SPI BUS STATS: SLAVE UID B-LEN B-CRC-C B-CRC-L VER TIME PING M=>S rx err % S=>M rx err % SS SD SR Rst LastRstT Packets Time msec. Speed(pack./sec) 0 3D0063001251323532343337 0 00000000 00000000 0x13160100 886 343 4660 4639 20 0.4% 6114 5979 135 2.2% 0 0 0 0 0
Total packets: 4660 in 864882 ms, speed: 5.39 packets/sec Exporting stat... [done]
This looks like a bad board...reply to your order email and they'll open and rma and take care of this.
|
|
|
|
POD5
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 251
Merit: 10
Keep smiling if you're loosing!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2024, 08:34:01 AM Last edit: July 18, 2024, 10:15:00 AM by POD5 |
|
Good morning, Are futurebit btc node queries allowed? How? ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) My next question: When using SOLO MINING are the rewards paid to the address that was entered in my settings? Also the "accepted shares"? Thanks in advance!
|
|
|
|
MakerAZ
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2024, 01:13:04 PM |
|
Hello!
I've recently got my Futurebit Apollo II Full Node BTC Miner. I have some questions:
1) What type of BTC wallet address does Apollo II Solo Miner support? Does it support bc1 address? 2) What software Apollo II does use for BTC Mining? Is it CGMiner? 3) Is it possible to install custom built CGMiner onto Apollo II BTC Miner? if yes, what are the steps?
Thank you!
|
|
|
|
PennyBit
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2024, 10:32:21 PM |
|
Hello!
I've recently got my Futurebit Apollo II Full Node BTC Miner. I have some questions:
1) What type of BTC wallet address does Apollo II Solo Miner support? Does it support bc1 address? 2) What software Apollo II does use for BTC Mining? Is it CGMiner? 3) Is it possible to install custom built CGMiner onto Apollo II BTC Miner? if yes, what are the steps?
Thank you!
1) I've used several bc1 addresses and they've all worked fine. You shouldn't have a problem. 2) Interesting question that I really can't answer with much knowledge. Although, it would be interesting to know if you could take, for instance, an R909 pod miner and connect it to the USB port on the Apollo 2 full node and run it. But I'm just thinking out loud. Anyway, I do know that CGMiner will allow a command-line interface so as to configure various mining configurations but I haven't found much yet in the way of that sort of access on AP2. It seems to be all accessed via the interface. Now, I should state that I haven't nosed around much inside the Linux-side files at this point and would say that if you decide to do that, beware. 3) See above.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2151
Merit: 1399
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2024, 06:22:26 PM |
|
Hello!
I've recently got my Futurebit Apollo II Full Node BTC Miner. I have some questions:
1) What type of BTC wallet address does Apollo II Solo Miner support? Does it support bc1 address? 2) What software Apollo II does use for BTC Mining? Is it CGMiner? 3) Is it possible to install custom built CGMiner onto Apollo II BTC Miner? if yes, what are the steps?
Thank you!
1) I've used several bc1 addresses and they've all worked fine. You shouldn't have a problem. 2) Interesting question that I really can't answer with much knowledge. Although, it would be interesting to know if you could take, for instance, an R909 pod miner and connect it to the USB port on the Apollo 2 full node and run it. But I'm just thinking out loud. Anyway, I do know that CGMiner will allow a command-line interface so as to configure various mining configurations but I haven't found much yet in the way of that sort of access on AP2. It seems to be all accessed via the interface. Now, I should state that I haven't nosed around much inside the Linux-side files at this point and would say that if you decide to do that, beware. 3) See above. All addresses are supported except the longer segwit and taproot addresses (forgot the script address names of the top of my head but all legacy, and segwit addresses that are 42 char I believe are currently supported for solo mining). Apollo uses a custom firmware that is not cgminer based. Yes you could connect any other USB based miner to the apollo to run in the backend (obviously would not show up in the GUI). Most miner options are exposed in the GUI, but if you want to see all of them and tinker just go to binary directory (/opt/apolloapi/backend/miner) and ./futurebit-miner --help
|
|
|
|
PennyBit
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2024, 08:37:11 PM |
|
Hello!
I've recently got my Futurebit Apollo II Full Node BTC Miner. I have some questions:
1) What type of BTC wallet address does Apollo II Solo Miner support? Does it support bc1 address? 2) What software Apollo II does use for BTC Mining? Is it CGMiner? 3) Is it possible to install custom built CGMiner onto Apollo II BTC Miner? if yes, what are the steps?
Thank you!
1) I've used several bc1 addresses and they've all worked fine. You shouldn't have a problem. 2) Interesting question that I really can't answer with much knowledge. Although, it would be interesting to know if you could take, for instance, an R909 pod miner and connect it to the USB port on the Apollo 2 full node and run it. But I'm just thinking out loud. Anyway, I do know that CGMiner will allow a command-line interface so as to configure various mining configurations but I haven't found much yet in the way of that sort of access on AP2. It seems to be all accessed via the interface. Now, I should state that I haven't nosed around much inside the Linux-side files at this point and would say that if you decide to do that, beware. 3) See above. All addresses are supported except the longer segwit and taproot addresses (forgot the script address names of the top of my head but all legacy, and segwit addresses that are 42 char I believe are currently supported for solo mining). Apollo uses a custom firmware that is not cgminer based. Yes you could connect any other USB based miner to the apollo to run in the backend (obviously would not show up in the GUI). Most miner options are exposed in the GUI, but if you want to see all of them and tinker just go to binary directory (/opt/apolloapi/backend/miner) and ./futurebit-miner --help Thanks jstefanop. Good info to know.
|
|
|
|
zeekmine
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2024, 09:53:56 PM |
|
Anyone having problems with the solo miner stopping. I have to reboot. It happens every 1 to 3 days. Anyway to debug aside from manually logging into Linux and checking? ? I have the 2.0.5 Apollo II running low speed on the miner and a HTTP connection to a S19. I am testing an a little worried about hooking up more to it. Thanks.
|
|
|
|
TIRMINE
Jr. Member
Offline
Activity: 109
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 24, 2024, 10:42:15 PM |
|
Anyone know if there is a way to adjust the difficulty settings when renting hash and pointing to the Apollo?
|
|
|
|
bluudz
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 215
Merit: 116
Why so serious?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2024, 07:34:44 AM Last edit: July 25, 2024, 07:44:53 AM by bluudz |
|
Hey everyone. Very happy with my Apollo 2 so far. Only thing I'm a bit struggling with is to get node to connect to more peers. Any workaround? I did add quite a few through addnode=x.x.x.x:8333 but still it doesn't seem to connect easily to more than 10 peers.
Any ideas how to get more peers to connect to the node?
Also I was wondering whether there shouldn't be field or some way to show when one finds block! Otherwise it could take long time before you realize you actually found one.
Thanks
|
|
|
|
TIRMINE
Jr. Member
Offline
Activity: 109
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2024, 02:22:36 PM |
|
Hey everyone. Very happy with my Apollo 2 so far. Only thing I'm a bit struggling with is to get node to connect to more peers. Any workaround? I did add quite a few through addnode=x.x.x.x:8333 but still it doesn't seem to connect easily to more than 10 peers.
Any ideas how to get more peers to connect to the node?
Also I was wondering whether there shouldn't be field or some way to show when one finds block! Otherwise it could take long time before you realize you actually found one.
Thanks
Are you fully synced? When I was syncing it would max at 10 for me but once fully synced I'm getting the 32
|
|
|
|
bluudz
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 215
Merit: 116
Why so serious?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2024, 08:22:56 PM Last edit: July 25, 2024, 09:33:45 PM by bluudz |
|
Hey everyone. Very happy with my Apollo 2 so far. Only thing I'm a bit struggling with is to get node to connect to more peers. Any workaround? I did add quite a few through addnode=x.x.x.x:8333 but still it doesn't seem to connect easily to more than 10 peers.
Any ideas how to get more peers to connect to the node?
Also I was wondering whether there shouldn't be field or some way to show when one finds block! Otherwise it could take long time before you realize you actually found one.
Thanks
Are you fully synced? When I was syncing it would max at 10 for me but once fully synced I'm getting the 32 Yes. Fully synced and solo mining. Max connections set to 40, but only connected to 11. Edit: Got this resolved. Last night when I added nodes I also changed max connections and now when I looks to bitcoin.conf in the node it didn't actually addnodes at all, even tho it was showing in the gui Ui so I have added them manually and now I have 20 connections at least.
|
|
|
|
bluudz
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 215
Merit: 116
Why so serious?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 25, 2024, 10:14:50 PM |
|
Hey everyone. Very happy with my Apollo 2 so far. Only thing I'm a bit struggling with is to get node to connect to more peers. Any workaround? I did add quite a few through addnode=x.x.x.x:8333 but still it doesn't seem to connect easily to more than 10 peers.
Any ideas how to get more peers to connect to the node?
Also I was wondering whether there shouldn't be field or some way to show when one finds block! Otherwise it could take long time before you realize you actually found one.
Thanks
Are you fully synced? When I was syncing it would max at 10 for me but once fully synced I'm getting the 32 Yes. Fully synced and solo mining. Max connections set to 40, but only connected to 11. Edit: Got this resolved. Last night when I added nodes I also changed max connections and now when I looks to bitcoin.conf in the node it didn't actually addnodes at all, even tho it was showing in the gui Ui so I have added them manually and now I have 20 connections at least. Unfortunately it seems there is some kind of bug with my configuration. Every time I restart the miner it takes first addnode=x.x.x.x and populate with same ip address all other entries in my bitcoin.conf. When I manually change bitcoin.conf and only restart node it does work fine and connects to all ips, but as soon as whole miner get restarted it does again wipe all ips in .conf except the first one. Not really sure what is causing this.
|
|
|
|
johnstewart
Jr. Member
Offline
Activity: 31
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 26, 2024, 06:50:49 AM |
|
Hello Everyones ! Can you please tell me exactly wich model of MCU is in the Apollo 2 ? it seems it's an orange pi 4 but i'm not shure if it's this one ? Thanks you !!!! ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
|