Ebit e9i firmware problem

[gery8989]

Hello, I uploaded one ebit e9i with official firmware V9.1.0.36.

When restart the machine, the only accessible port are 22 by ssh but admin/admin not runs and the web interface not accessible.

Any suggestion?

Thanks

[1715177534]

1715177534

[BitMaxz]

I don't know what Ebit e9i looks like but it looks like it's the same as other ASIC miner with IP report and reset button.

Can you try to hold the reset button for 15-20 seconds to reset the miner to factory default then let's see after that if you can access the WebGUI.

If it doesn't work try another button I don't know if the name is the IPreport button or other name just try it holding it for 15-20 seconds then release and test it again if you can access the WebGUI after the miner reboot.

[gery8989]

No reset buton in this generation. Now are using 192.168.80.140 ip, and this is the default ip.

This is the machine http://miner.ebang.com.cn/goods-12.html

Thanks

[BitMaxz]

Check carefully sometimes it does not have a name and it needs paperclip to press the button.

Look at this


If it doesn't actually have a button then try to use Management Tool from ebang you can download it from here http://miner.ebang.com.cn/article-8.html
Let see if you can access it through that tool and change pool.

[gery8989]

Sorry, yes have a reset button. They don't do nothing.
The problem are that only available port 22
In the past the name are zhejiang ebang communication LTD and now are Xilinx. But I uplodade from official website