SOLD<<<< Okay selling some L3+ with Apw3++ psu five to sell>>>Sold

[philipma1957]

Only selling to usa buyers.

Will take
btc
ltc
doge
eth

I self escrow as I have done tons of sales here. With zero issues.


I have a few of them all 4 boards work

they run at about freq 400 and do around 521 mh
 
Mine have a psu and all 4 boards work.

Looking at ebay I see some for
890 buy it now no psu and a shitty board.


https://www.ebay.com/itm/164962800431?


I see an ebay for

 https://www.ebay.com/itm/324717082348?

1000 + 55 shipping. no psu
I see an ebay for 1099 from China slow shipping

https://www.ebay.com/itm/384251839341?



this is the Best Buy it now I see in the usa
https://www.ebay.com/itm/194245517174?

1150 free shipping with psu but a newbie seller.



So Asking for a bid under 1150 for 1 unit.

Please realize that low bids like 600 or 700 will not work.

I have 5 pieces

will sell

1,2,3,4,5 just let me know what you think is fair.

I can ship this week .
to usa.  

your bid will get you 1 tested machine with an apw3++  psu and free shipping

to the lower 48 states.  I can ship as early as Monday

I have 5 to sell.

My terms are pay up front in btc,ltc,doge,eth

I ship I give you 1 day to test it once you get it.


Yes I can discount if you buy more than one.

I am selling single boards on ebay.

https://www.ebay.com/itm/154521033885


I have good feedback on ebay.

https://www.ebay.com/fdbk/feedback_profile/philipma1957?filter=feedback_page:RECEIVED_AS_SELLER&_trksid=p2047675.l2560



I won't sell full units on ebay just single boards.

So make an offer for 1 full unit here. or 2 or 3 or 4 or 5.

[1714903072]

1714903072

[1714903072]

1714903072

[1714903072]

1714903072

[Philipma1957cellphone]

SOLD a single L3+ board on Ebay today for :

[philipma1957]

hey, do you have any of the smaller l3's or l3 boards?

thanks,

Yes i have a mini L 3 with 2 good boards. and 1,2  dead boards


give me a minute I will post a screen shot of it mining. I have it in the house.

outer two boards are good

 middle two are meh set to freq 391

I set it again to freq 366



















I think I have a second unit at the farm.  all 4 boards work
Going to farm tomorrow

[philipma1957]

Okay picked up the 'good' mini L3 these are 1/2 power of a L3+. they do about 225-260 mh.

Very Nice gear and quiet. they burn 400 watts a good space heater.

So I have 1 good one and on that is not so good. see screen shots above.

I sold more L3+ hashboards on Ebay

So I only have 4 full L3+ miners with ant miner apw+ psu left.

this ebay seller wants 1130 with an best  offer option and a psu free shipping

https://www.ebay.com/itm/174838991973?


this seller wants 1000 with a best offer option and no psu 55 to ship
https://www.ebay.com/itm/324726663664?

I would beat either one

over 800 under 999 for one with psu.......... make an offer for it
over 700 under 899 for one with no psu....... make an offer for it.

BTC
LTC
Doge
ETH pay up front ship to USA only.

The mini L3 that fully works is rare But I would sell it 444.44 to 555.55 with a psu make an offer.

the flakey L3 that has a mind of its own not sure what to do with it make an offer under 333.33

So far the ebay sales are working so this gear may not last.




I would escrow it and take a return in the first 48 hours you have it. If they do not ship well

[ncsupanda]

Okay picked up the 'good' mini L3 these are 1/2 power of a L3+. they do about 225-260 mh.

Very Nice gear and quiet. they burn 400 watts a good space heater.

So I have 1 good one and on that is not so good. see screen shots above.

I sold more L3+ hashboards on Ebay

So I only have 4 full L3+ miners with ant miner apw+ psu left.

this ebay seller wants 1130 with an best  offer option and a psu free shipping

https://www.ebay.com/itm/174838991973?


this seller wants 1000 with a best offer option and no psu 55 to ship
https://www.ebay.com/itm/324726663664?

I would beat either one

over 800 under 999 for one with psu.......... make an offer for it
over 700 under 899 for one with no psu....... make an offer for it.

BTC
LTC
Doge
ETH pay up front ship to USA only.

The mini L3 that fully works is rare But I would sell it 444.44 to 555.55 with a psu make an offer.

the flakey L3 that has a mind of its own not sure what to do with it make an offer under 333.33

So far the ebay sales are working so this gear may not last.




I would escrow it and take a return in the first 48 hours you have it. If they do not ship well

Will you make me a deal if I take several? No PSU necessary, I have a bunch of new in stock.
Curious about the condition of them - You can rate it as you deem it, just wondering how beat up they are in general.

Shipping would be to NC.

[philipma1957]

My single hashboard sales are doing well on ebay

https://www.ebay.com/itm/164980585543?

i sell for 288 and clear about 240 so 960 if I sell four boards.

I get about 140 in selling the shell and the fans and the controller.

so a unit pieced out on ebay is around 1100 net.

Of course returns and scammers abound on ebay.

So realistic guess is I clear 900-950 at worst and not 1100.

These units were purchased in part direct from bitmain new. In spring of 2018

or used on ebay and this site in dec 2018 to feb 2019.

They are mixed and I cant tell which one I am selling.

ebay
bitcointalk
bitmain.

I ran them from freq 350 to 400 depending on the mines temps.

Testing cleaning and selling three pieces is doable.

I rate them B or B+  not A- or A

Not sure what price should be. what do you think you would pay for 3 of them?

 3 x 700 = 2100 free shipping .

I clear 2000

vs parting out on ebay Slower but I clear 2700 to 3300.


There is something to be said about selling the three to you and parting the others.

I am ballparking the L3+ prices but

 2100 for the three cleaned and shipping is about as low as I should offer. I would take btc ,ltc ,doge ,eth coin escrow my self and offer you 48 hour testing.

[philipma1957]

let me know if your willing to part with just a working blade from the smaller L3

also do you know what version the blades are?

thanks,

I will check the units

[ncsupanda]

-snip-

 2100 for the three cleaned and shipping is about as low as I should offer. I would take btc ,ltc ,doge ,eth coin escrow my self and offer you 48 hour testing.

I'll do this - please post the transaction details here (receiving address, when you'll ship, etc). I'll do $2100 in BTC.

[philipma1957]

-snip-

 2100 for the three cleaned and shipping is about as low as I should offer. I would take btc ,ltc ,doge ,eth coin escrow my self and offer you 48 hour testing.

I'll do this - please post the transaction details here (receiving address, when you'll ship, etc). I'll do $2100 in BTC.

Tired been cutting trees, pulling roots and stumps. laying weed block and a gravel bed with 4x4 pressure treated wood border.

I am prepping for a nice shed so the gravel bed needs to be ready asap.

I did everything except cut the really big trees. I simply could not hire help.

So I am going to be too sore to finish moving the gravel tomorrow.



I will clean and test the three units tomorrow. Easy work I can do on the bench.
 We can cut the deal then, as I want to be sure it is all good before I shop it to  you.

[ncsupanda]

-snip-

 2100 for the three cleaned and shipping is about as low as I should offer. I would take btc ,ltc ,doge ,eth coin escrow my self and offer you 48 hour testing.

I'll do this - please post the transaction details here (receiving address, when you'll ship, etc). I'll do $2100 in BTC.

Tired been cutting trees, pulling roots and stumps. laying weed block and a gravel bed with 4x4 pressure treated wood border.

I am prepping for a nice shed so the gravel bed needs to be ready asap.

I did everything except cut the really big trees. I simply could not hire help.

So I am going to be too sore to finish moving the gravel tomorrow.



I will clean and test the three units tomorrow. Easy work I can do on the bench.
 We can cut the deal then, as I want to be sure it is all good before I shop it to  you.

Sounds good. Around where are you located? Too much humidity where I am to be outside working that long in this heat!

[philipma1957]

-snip-

 2100 for the three cleaned and shipping is about as low as I should offer. I would take btc ,ltc ,doge ,eth coin escrow my self and offer you 48 hour testing.

I'll do this - please post the transaction details here (receiving address, when you'll ship, etc). I'll do $2100 in BTC.

Tired been cutting trees, pulling roots and stumps. laying weed block and a gravel bed with 4x4 pressure treated wood border.

I am prepping for a nice shed so the gravel bed needs to be ready asap.

I did everything except cut the really big trees. I simply could not hire help.

So I am going to be too sore to finish moving the gravel tomorrow.



I will clean and test the three units tomorrow. Easy work I can do on the bench.
 We can cut the deal then, as I want to be sure it is all good before I shop it to  you.

Sounds good. Around where are you located? Too much humidity where I am to be outside working that long in this heat!

A bit North of you Howell, New Jersey.  Yeah I can work from 2pm to 7pm as it is in shade.

I tested 1 unit it is working fine.
I should have this all ready by 6-8 tonight.


Here is the 18 x 12 foot gravel pad almost done.

[ncsupanda]

-snip-

 2100 for the three cleaned and shipping is about as low as I should offer. I would take btc ,ltc ,doge ,eth coin escrow my self and offer you 48 hour testing.

I'll do this - please post the transaction details here (receiving address, when you'll ship, etc). I'll do $2100 in BTC.

Tired been cutting trees, pulling roots and stumps. laying weed block and a gravel bed with 4x4 pressure treated wood border.

I am prepping for a nice shed so the gravel bed needs to be ready asap.

I did everything except cut the really big trees. I simply could not hire help.

So I am going to be too sore to finish moving the gravel tomorrow.



I will clean and test the three units tomorrow. Easy work I can do on the bench.
 We can cut the deal then, as I want to be sure it is all good before I shop it to  you.

Sounds good. Around where are you located? Too much humidity where I am to be outside working that long in this heat!

A bit North of you Howell, New Jersey.  Yeah I can work from 2pm to 7pm as it is in shade.

I tested 1 unit it is working fine.
I should have this all ready by 6-8 tonight.


Here is the 18 x 12 foot gravel pad almost done.
-image snipped-

Looks solid; will have to see the shed when its in place.

I'll be around most of the night so you can message me whenever you're around and I'll send that payment over.

[philipma1957]

-snip-

 2100 for the three cleaned and shipping is about as low as I should offer. I would take btc ,ltc ,doge ,eth coin escrow my self and offer you 48 hour testing.

I'll do this - please post the transaction details here (receiving address, when you'll ship, etc). I'll do $2100 in BTC.

Tired been cutting trees, pulling roots and stumps. laying weed block and a gravel bed with 4x4 pressure treated wood border.

I am prepping for a nice shed so the gravel bed needs to be ready asap.

I did everything except cut the really big trees. I simply could not hire help.

So I am going to be too sore to finish moving the gravel tomorrow.



I will clean and test the three units tomorrow. Easy work I can do on the bench.
 We can cut the deal then, as I want to be sure it is all good before I shop it to  you.

Sounds good. Around where are you located? Too much humidity where I am to be outside working that long in this heat!

A bit North of you Howell, New Jersey.  Yeah I can work from 2pm to 7pm as it is in shade.

I tested 1 unit it is working fine.
I should have this all ready by 6-8 tonight.


Here is the 18 x 12 foot gravel pad almost done.
-image snipped-

Looks solid; will have to see the shed when its in place.

I'll be around most of the night so you can message me whenever you're around and I'll send that payment over.

Just finished your 3 are set to Dhcp
root
root

signs in

all are good to go 3 for 2100 USD in BTC.

price includes shipping from NJ to NC

most likely fedex ground insured with signature required.

I will pm in five minutes .

[philipma1957]

Sent pm I expect BTC payment to this address:


3CHtPpQYEWV9yoX8SU7BVwUkvJtQ8yyzmw




I will need  a BTC refund address if gear ships poorly and needs return.

[ncsupanda]

Sent pm I expect BTC payment to this address:


3CHtPpQYEWV9yoX8SU7BVwUkvJtQ8yyzmw




I will need  a BTC refund address if gear ships poorly and needs return.

Payment sent, TXID 91e83d618254dd84136c40ac37ae30a8f285340308122031528727045a43b17c

Refund (if needed) to: bc1q564v5g9pm7ze5ugm2mwyadna74yjc2atclrm6x

Cheers

[philipma1957]

Just waiting on confirms

 I will pack it and ship it on Weds the 28th

Thank you.









As of now thread Has no more gear.  I have sold everything.

I do have 2 loose boards on ebay

https://www.ebay.com/itm/154546469319






at


TotallyNotaLiar
Jr. Member


The little L3 half size behaves too weird to sell
Chips read wrong Just do not know what is wrong with it.

[ncsupanda]

1 of the boxes showed up today - fully working. Looking forward to the other 2 arriving.

[ncsupanda]

1 of the boxes showed up today - fully working. Looking forward to the other 2 arriving.

Other 2 arrived. All 3 units were in great condition, thanks for the quick sale.

[Philipma1957cellphone]

Good. I,am back on the road for a few days.

My bro in law had a medical event.

He was saved from death by an alert neighbor.

He is in hospital in New York. So I have my wife up here manning the fort while I shuttle back and forth between NY and NJ.

I do not  business  with this account only the main one. I think I will be back in NJ tommorrow  night.

[ncsupanda]

Good. I,am back on the road for a few days.

My bro in law had a medical event.

He was saved from death by an alert neighbor.

He is in hospital in New York. So I have my wife up here manning the fort while I shuttle back and forth between NY and NJ.

I do not  business  with this account only the main one. I think I will be back in NJ tommorrow  night.

Sorry to hear that. Take care and stay safe.