3080ti thread for smos.

[philipma1957]

So my partner got lucky or unlucky on the newegg shuffle he won a 3080ti asus strix.

I can do 57 mh to 60 mh on eth with it.

So I said f that lets try raven.

I am doing 42.85  which is about  13.4 cents x 42.85 =  $5.74 a day

settings are

core
-200

ram
1600

power
300

temp
60

fan
72

so using 300 watts is 7 kwatt a day at 20 cents = 1.40

5.74-1.40 = $4.34 profit a day so more than a year to pay this card.

Eth would be at best 60 x 7.7 = 4.62 earned but power used is less  5 kwatts at 20 cents is 1 dollar

so 4.62-1 = 3.62 a day


Cant get octopus running on smos do not know why.

I would not mind making a thread about

Eth
RAVEN
Octopus

settings etc.  prefer smos setups but all welcome.

feel free to post info.

[1714856907]

1714856907

[waggy459]

Phil have you tried absolute core clock instead of the offset?  It brought power use on my 3060 down around 10-15%.

[philipma1957]

Phil have you tried absolute core clock instead of the offset?  It brought power use on my 3060 down around 10-15%.

Just started fucking with the card.

so I am learning what I can.

so are you doing raven and absolute clock?

if so how do I set it in smos?

[waggy459]

Yes I have 1300 core and 2000 mem, also on rvn, again a 3060.  I’m in Hive with that card but I think if you put in large numbers for core it’ll switch to absolute core. I kept a running spreadsheet and iterated maybe 25 times to find the most efficient combo. I went from 130 pl to now it runs at around 115 watts, I brought pl down to 120 but it stays lower all the time.

[philipma1957]

Yes I have 1300 core and 2000 mem, also on rvn, again a 3060.  I’m in Hive with that card but I think if you put in large numbers for core it’ll switch to absolute core. I kept a running spreadsheet and iterated maybe 25 times to find the most efficient combo. I went from 130 pl to now it runs at around 115 watts, I brought pl down to 120 but it stays lower all the time.

It is a decent raven card I played some more and get 50mh with it which is about $6.50 it is pulling 325 watts to do it.

core-----------ram---------------watts--------------hash ----temp---- wall watts one card rig all parts.
-300............1000..................325.....................50
-300............1000..................330.....................51.38...57c..........399-402 flux read.
-300............1000..................335.....................52.68...58c...........403-406 flux read.


1400...........2000.................290.......................40
1400...........2000.................295.......................42
1400...........2000.................300.......................43
1400...........2000.................305.......................44
1400...........2000.................310.......................46  
1400...........2000.................315.......................47
1400...........2000.................320.......................49.03...
1400...........2000.................325.......................49.35... 57c
1400...........2000.................330.......................50.44... 57c
1400...........2000.................335.......................52.49... 58c.......403
.
Looks like 320-335 is top end power draw on the strix. and basically a bit more numbers at 330 and 335


very interesting core and ram does not much . Hash all seems to be power based.

[waggy459]

Phil fwiw. My method was to set pl pretty high, like 135-140. Then mess with both clocks while recording hash per watt. A combo of clocks rose to the top above which no extra hash was produced but more power was burned up to the pl. Setting back to the best settings ended up drawing around 118 watts max in software, so I just set pl to 120, basically a couple ticks above where it consumes anyway. It waivers mostly 113-115 watts sometimes touches 118 max.

[philipma1957]

If anyone has working octopus for smos let me know.

at the moment it looks like 330-335 watts gives about  52-53 mh of raven which is close to 7 bucks a day.

power use would be 8kwatts

for now

core-----------ram---------------watts--------------hash ----temp---- wall watts one card rig all parts.
-200............1000..................325...................50.49......57c.........395-401


really have not found  change in hash much for core or ram

but 50.49 hash is good.

I suppose 52-53 for 10 more watts is better. but I will run this over night to see if it trails off.

[arielbit]

try nbminer with the lhr unlock(a percentage) for ETH, i did ergo for months with the 3080ti, ergo did 5$ to 18$, good returns.

tested lhr 100 on nbminer i've seen 70mhs at around 130watts, lhr 70 is 75mhs at 230watts...(watts info is nbminer software)(stability not yet tested).

play with core clocks and power limit (turn these down) but the the memory clocks should be clocked higher.

[philipma1957]

try nbminer with the lhr unlock(a percentage) for ETH, i did ergo for months with the 3080ti, ergo did 5$ to 18$, good returns.

tested lhr 100 on nbminer i've seen 70mhs at around 130watts, lhr 70 is 75mhs at 230watts...(watts info is nbminer software)(stability not yet tested).

play with core clocks and power limit (turn these down) but the the memory clocks should be clocked higher.

so my nb is

 -a eth -o stratum+tcp://ethereum.viabtc.com:3333 -u phil.3080ti -lhr 70 --api 127.0.0.1:22333

73.1-75.5 -78.68 mh so far pulling  275 watts

core  -200
ram  1000
power 275


hey this is good.

So it shifts from like 73 to 78

dropping to 250 watts. and it tanks to 61-63- 65.

c -200
r 1000
w  250 has 61-65


c -200
r 1300
w 250 has 63-66

c-200
r 1300
w 275 has 74-78


c -200
r 1400
w 285 has 76 - 79



that is decent 76 x 8.3 cents = $6.31. power at 285 is about 8 kwatts or 1.60 with 20 cent power or 80 cents with 10 cent power

so 4.71 to 5.31 a day after power

[arielbit]

my 3080ti's still in ergo (265mh at 280w)so can't say anything concrete for ETH mining besides nbminer lhr sauce is still new.

[philipma1957]

my 3080ti's still in ergo (265mh at 280w)so can't say anything concrete for ETH mining besides nbminer lhr sauce is still new.

what pool does ergo?

[arielbit]

my 3080ti's still in ergo (265mh at 280w)so can't say anything concrete for ETH mining besides nbminer lhr sauce is still new.

what pool does ergo?

ergo.nanopool.org

ergo.herominers.com

i'm on nanopool, hashrate is big enough to wait for 5 ERG payout (didn't check if there is an option to reduce payouts)

checked user settings in nanopool, i think minimum payout can be adjusted to 1 ERG

[philipma1957]

So I am doing ergo overnight at nicehash

and eth does well

and raven is decent

So all 3 coins are okay. but not great.

ergo does about 5-6 a day at 285 watts

eth does about 5-6 a day at 285 watts

raven does about 6-7 at 330 watts.

[crazydane]

I have a handful of LHR EVGA cards on Raven as follows:





Clocks/power set as follows:



The 3080Ti XC doesn't perform nearly as good as the FTW3's and requires a negative offset on the memory to even reach 50 MH/s.  Go figure...

[waggy459]

Looking at all these numbers for RVN in this thread, unless one doesn't care about power efficiency, makes me think you can get more out of a 3080ti.  I'm getting ~0.19mh/watt RVN from a lowly 3060 (non ti) LHR=21.8mh/115watt software.  For me many combinations netted .15-.17mh/watt, few gave current efficiency. 

[philipma1957]

Looking at all these numbers for RVN in this thread, unless one doesn't care about power efficiency, makes me think you can get more out of a 3080ti.  I'm getting ~0.19mh/watt RVN from a lowly 3060 (non ti) LHR=21.8mh/115watt software.  For me many combinations netted .15-.17mh/watt, few gave current efficiency.  

Actually raven may be best bet for it at the moment.

I do wonder if better eth tweaks can be done.

I get a constant flux of 76-80 mh see screen shots.

285  watts for gpu
325  watts for rig
330  k-watt meter