Avalon Miner 1166 pro 78 - stoped working after a week

[__o7]

I'll get some logs tomorrow.  The fans and boards are good as far as I can tell.  All fans run perfectly up to max speed.  The boards can hash at 75-78 th, but it seems like the miner reboots randomly.  When it happens, the board temperatures drop to 0 and the fans go to full speed.  It did the same thing one two different pools. 

A few days ago after a reset it ran for 8 hours straight at full hash rate before randomly rebooting.  Its not temperature rated as it is supplied cool air (13-16C from outside). 

The reset was just to try and narrow down any on potential issues.  We have another identical miner running on the same network and it doesn't have the same issues.  Potentially a control board issue?

[Rsbtcpy]

Buenas Gente...

Tengo muchos problemas con maquinas AvalonMiner 1166Pro-S-72 algunas ni un día logro minar, si me podrían ayudar intente actualizar software cambio de fuente revisión completa de piezas sin resultado...

  {'ESTADO':[{'ESTADO':'S','Cuándo':276,'Código':11,'Msj':'Resumen','Descripción':'cgminer 4.11.1'}],'RESUMEN ':[{'Transcurrido':256,'MHS av':0.00,'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Bloques encontrados': 0,'Getworks':14,'Aceptado':0,'Rechazado':0,'Errores de hardware':0,'Utilidad':0.00,'Desechado':2458388,'Obsoleto':0,'Errores de obtención': 0,'Trabajo local':0,'Fallas remotas':0,'Bloqueos de red':0,'Total MH':0.0000,'Utilidad de trabajo':0.00,'Dificultad aceptada':0.00000000,'Dificultad rechazada':0.00000000 ,'Dificultad obsoleta':0.00000000,'Mejor cuota':0,'Hardware del dispositivo%':0.0000,'Dispositivo rechazado%':0.0000,'Grupo rechazado%':0.0000,'Grupo obsoleto%':0.0000,'Último trabajo':0}
{'ESTADO':[{'ESTADO':'S','Cuando':276,'Código':70,'Msj':'Estadísticas de CGMiner','Descripción':'cgminer 4.11.1'}],' ESTADÍSTICAS':[{'ESTÁD.':0,'ID':'AVA100','Transcurridas':256,'Llamadas':0,'Esperar':0.000000,'Máx.':0.000000,'Mín.':99999999.000000,' MM ID0':'Ver[1166Pro-S-72-21072803_4ec6bb0_211fc46] DNA[02010000452cecc2] MEMFREE[1524528.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Trabajo: En Trabajo, Hash Board: 1 ] Transcurrido[283] BOOTBY[0x11.00000000] LW[0] MH[0 0] HW[0] DH[0.000%] Temp[29] TMax[29] TAvg[29] Fan1[6139] Fan2[6133] Fan3[6137] Fan4[ 6061] FanR[83%] Vo[322] PS[0 1191 1291 21 258 1292 379] PLL0[0 0 0 0] PLL1[0 0 0 0] GHSspd[0.00] DHspd[0.000%] GHSmm[0.00] GHSavg[ 0.00] WU[0.00] Frec[0.00] Led[0] MGHS[0.00 0.00] MTmax[-273 -273] MTavg[0 0] TA[120] Core[A3201] PING[0] POWS[0] HASHS[0 0] POOLS[0] SoftOFF[0] ECHU[1 1] ECMM[ 1] SF0[512 532 552 572] SF1[512 532 552 572] PVT_T0[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_T1[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_V0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW[0 0] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 [OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[--avalon10-frecuencia 512:532:552:572 --avalon10-voltage-level 48 ] ATAOPTS1[--avalon10-frecuencia 640:660:680:700 --avalon10- nivel de voltaje 59 ] ADJ[1] COP[0 0 0] MPO[3200] MVL[87] ATABD0[640 660 680 700] ATABD1[640 660 680 700] WORKMODE[0]','MM Count':1, 'Velocidad inteligente': 1, 'Compensación de nivel de voltaje': 0, 'Máscara de ausencia': 25}25}25}25}25}


Desde ya muchas gracias...

[HagssFIN]

Mä en osaa puhua espanjaa.

[BitMaxz]

good people...

I have many problems with AvalonMiner 1166Pro-S-72 machines, some I can't even mine for a day, if you could help me, try to update software, change source, complete revision of parts without result...

Code:

{'ESTADO':[{'ESTADO':'S','Cuando':276,'Código':70,'Msj':'Estadísticas de CGMiner','Descripción':'cgminer 4.11.1'}],' ESTADÍSTICAS':[{'ESTÁD.':0,'ID':'AVA100','Transcurridas':256,'Llamadas':0,'Esperar':0.000000,'Máx.':0.000000,'Mín.':99999999.000000,' MM ID0':'Ver[1166Pro-S-72-21072803_4ec6bb0_211fc46] DNA[02010000452cecc2] MEMFREE[1524528.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Trabajo: En Trabajo, Hash Board: 1 ] Transcurrido[283] BOOTBY[0x11.00000000] LW[0] MH[0 0] HW[0] DH[0.000%] Temp[29] TMax[29] TAvg[29] Fan1[6139] Fan2[6133] Fan3[6137] Fan4[ 6061] FanR[83%] Vo[322] PS[0 1191 1291 21 258 1292 379] PLL0[0 0 0 0] PLL1[0 0 0 0] GHSspd[0.00] DHspd[0.000%] GHSmm[0.00] GHSavg[ 0.00] WU[0.00] Frec[0.00] Led[0] MGHS[0.00 0.00] MTmax[-273 -273] MTavg[0 0] TA[120] Core[A3201] PING[0] POWS[0] HASHS[0 0] POOLS[0] SoftOFF[0] ECHU[1 1] ECMM[ 1]

Hope next time learn how to translate your language and learn how to put your logs inside the insert code tag.

Anyway, according to your logs it detects only 1 hashboard ECHU shows abnormal also ECMM shows abnormal there might be a poor connection between the controller and hashboards.

I would like to suggest is to try to replug or connection between the control board and hashboards also replug the PSU and then test it again

[Rsbtcpy]

Soy nuevo en el foro por eso pido ayuda, en realidad la pagina de google es la que hizo la traducción...

muchas gracias por la ayuda!!!