darkv0rt3x (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2021, 10:26:45 PM Last edit: November 13, 2021, 06:00:04 PM by darkv0rt3x Merited by LoyceV (14), Pmalek (2), ABCbits (1) |
|
Hello I'm trying to setup my LNBits manually without using the easy way which is installing Caddy. I want to set it up by hand and have full control of what is going on. My setup is the following: Device: RockPro64 Router: NetGear R7800 running OpenWrt OS: Debian BullsEye - Linux rockpro64 5.10.0-8-arm64 #1 SMP Debian 5.10.46-4 (2021-08-03) aarch64 GNU/Linux LN node: C-Lightning v0.10.1-38-g8f782b0 LNBits: repository cloned from github, so I think it's master branch version Web Server: nginx/1.18.0 I follwoned these steps to install LNBits, from their github: git clone https://github.com/lnbits/lnbits.git cd lnbits/ # ensure you have virtualenv installed, on debian/ubuntu 'apt install python3-venv' should work python3 -m venv venv ./venv/bin/pip install -r requirements.txt cp .env.example .env mkdir data ./venv/bin/quart assets ./venv/bin/quart migrate ./venv/bin/hypercorn -k trio --bind 0.0.0.0:5000 'lnbits.app:create_app()'
I also watched this video, until Caddy part: https://www.youtube.com/watch?v=WJRxJtYZAn4My LNBits .env file is like this (the relevant parts): $ cat .env QUART_APP=lnbits.app:create_app() QUART_ENV=development QUART_DEBUG=true
HOST=127.0.0.1 PORT=5000
LNBITS_ALLOWED_USERS="" LNBITS_DEFAULT_WALLET_NAME="LNBits wallet"
LNBITS_DATA_FOLDER="./data"
# disable selected extensions, or use "all" to disable all extensions LNBITS_DISABLED_EXTENSIONS="amilk,ngrok" LNBITS_FORCE_HTTPS=true LNBITS_SERVICE_FEE="0.0"
# Change theme LNBITS_SITE_TITLE="LNbits" LNBITS_SITE_TAGLINE="free and open-source lightning wallet" LNBITS_SITE_DESCRIPTION="My awesome message"
# Choose from mint, flamingo, salvador, autumn, monochrome, classic LNBITS_THEME_OPTIONS="mint, flamingo, classic, autumn, monochrome, salvador"
# Choose from LNPayWallet, OpenNodeWallet, LntxbotWallet, LndWallet (gRPC), # LndRestWallet, CLightningWallet, LNbitsWallet, SparkWallet LNBITS_BACKEND_WALLET_CLASS=CLightningWallet
# CLightningWallet CLIGHTNING_RPC="/home/rp64/.lightning/bitcoin/lightning-rpc"
My nginx config file, which is in /etc/nginx/conf.d/my.awesome.lnbits.site.com is like this: server { listen 5000 ssl http2 default_server; listen [::]:5000 ssl http2 default_server; server_name my.awesome.lnbits.site.ddns.net; # ---------> this site name is setup in in noip.com to avoid IP changes, if they happen
ssl_certificate /etc/nginx/ssl/my.awesome.lnbits.site.crt; ssl_certificate_key /etc/nginx/ssl/my.awesome.lnbits.site.key; ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3;
location / { proxy_pass https://localhost:5000/; # ----> directive that sets up the reverse proxy in nginx } }
My /etc/nginx/sites-available/default files is the default one. Didn't touch it! My router firewall rule to forward the traffic to my rp64 is the following: config redirect option dest_port '5000' option src 'wan' option name 'lnbits' option src_dport '5000' option target 'DNAT' option dest_ip '192.168.1.153' option dest 'lan' option proto 'tcp'
So, after all this, when I try to run the command: ./venv/bin/hypercorn -k trio --bind 0.0.0.0:5000 'lnbits.app:create_app()' I get this error: ✔️ CLightningWallet seems to be connected and with a balance of [i]not enough[/i] msat. Traceback (most recent call last): File "/home/rp64/Downloads/lnbits/./venv/bin/hypercorn", line 8, in <module> sys.exit(main()) File "/home/rp64/Downloads/lnbits/venv/lib/python3.9/site-packages/hypercorn/__main__.py", line 267, in main run(config) File "/home/rp64/Downloads/lnbits/venv/lib/python3.9/site-packages/hypercorn/run.py", line 34, in run worker_func(config) File "/home/rp64/Downloads/lnbits/venv/lib/python3.9/site-packages/hypercorn/trio/run.py", line 119, in trio_worker trio.run(partial(worker_serve, app, config, sockets=sockets, shutdown_trigger=shutdown_trigger)) File "/home/rp64/Downloads/lnbits/venv/lib/python3.9/site-packages/trio/_core/_run.py", line 1896, in run raise runner.main_task_outcome.error File "/home/rp64/Downloads/lnbits/venv/lib/python3.9/site-packages/hypercorn/trio/run.py", line 51, in worker_serve sockets = config.create_sockets() File "/home/rp64/Downloads/lnbits/venv/lib/python3.9/site-packages/hypercorn/config.py", line 177, in create_sockets insecure_sockets = self._create_sockets(self.bind) File "/home/rp64/Downloads/lnbits/venv/lib/python3.9/site-packages/hypercorn/config.py", line 240, in _create_sockets sock.bind(binding) OSError: [Errno 98] Address already in use
If I use http://my.awesome.lnbits.site.ddns.net:5000, the site works, no idea how if LNBits is not running! Note: I changed some folder names so that I can keep some of my privacy. I also changed the site name for the same reasons. So, this location "/home/rp64/Downloads/ doesn't really exist, but you all get the point. Same for the site name my.awesome.lnbits.site.ddns.net and ssl certificates.
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
darkv0rt3x (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2021, 10:37:31 PM |
|
Well, I need to reformulate this thread. It happens that I just noticed that I had one instance of LNBits running within screen. So, the problem is now different. I can't make it work on https! I'll rework the original thread to reformulate the problem! Edited; Well, maybe I don't need to reformulate the original thread and instead just post here the new problem! So, the only different thing is that LNBits is running but only on http. I have the ssl certificates set up, I have them in nginx config file, but if I try to use https I get this error on my laptop web browser: Secure Connection Failed
An error occurred during a connection to 192.168.1.153:5000. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem.
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
DaveF
Legendary
Offline
Activity: 3570
Merit: 6494
Crypto Swap Exchange
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2021, 01:29:16 AM |
|
Can you post the config of the nginx file?
That error usually occurs when the browser thinks its connecting with ssl / https but the server is just putting out non https on that port. Going offline till the morning, but you can probably google it.
-Dave
|
|
|
|
NotATether
Legendary
Offline
Activity: 1694
Merit: 7156
In memory of o_e_l_e_o
|
OSError: [Errno 98] Address already in use - This means you ran another service that is listening to the same port. Secure Connection Failed
An error occurred during a connection to 192.168.1.153:5000. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem. This means you are trying to connect to an HTTPS site using HTTP protocol (add "https://" at the beginning of the IP address). Also you should try to get LNBits to listen for HTTPS traffic - you can't just add a certificate to a site and it magically understands HTTPS traffic.
|
|
|
|
vv181
Legendary
Offline
Activity: 1932
Merit: 1273
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2021, 05:04:14 AM Last edit: October 29, 2021, 05:58:56 AM by vv181 |
|
proxy_pass https://localhost:5000/; # ----> directive that sets up the reverse proxy in nginx
./venv/bin/hypercorn -k trio --bind 0.0.0.0:5000 'lnbits.app:create_app()'
I think your nginx.conf should be: proxy_pass http://localhost:5000/; The Hypercorn didn't manage the SSL certs. So your Nginx passing a HTTPS request onto the Hypercorn. Try to change your Nginx conf as I suggested above, lets see if that works.
EDIT: In addition, my suggestion above would probably work if you access it from my.awesome.lnbits.site.ddns.net. Since you set up the Nginx configuration only as a reverse proxy for that domain. In another hand, the reason why it works on HTTP but not on HTTPS when you access it from the local network [192.168.1.153:5000] is because the connection didn't managed by Nginx, it comes from Hypercorn. The Nginx has no configuration for a local connection, thus the error you get is because you are accessing an HTTP site(LNBits) using an HTTPS protocol, and the Hypercorn got no idea about any SSL certs, etc.
|
|
|
|
darkv0rt3x (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2021, 08:11:22 PM Last edit: October 29, 2021, 08:21:52 PM by darkv0rt3x |
|
Can you post the config of the nginx file?
That error usually occurs when the browser thinks its connecting with ssl / https but the server is just putting out non https on that port. Going offline till the morning, but you can probably google it.
-Dave
It is in my first post, but here it is: server { listen 5000 ssl http2 default_server; listen [::]:5000 ssl http2 default_server; server_name my.awesome.lnbits.site.ddns.net; # ---------> this site name is setup in in noip.com to avoid IP changes, if they happen
ssl_certificate /etc/nginx/ssl/my.awesome.lnbits.site.crt; ssl_certificate_key /etc/nginx/ssl/my.awesome.lnbits.site.key; ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3;
location / { proxy_pass http://localhost:5000/; # ----> directive that sets up the reverse proxy in nginx } }
OSError: [Errno 98] Address already in use - This means you ran another service that is listening to the same port. Secure Connection Failed
An error occurred during a connection to 192.168.1.153:5000. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem. This means you are trying to connect to an HTTPS site using HTTP protocol (add "https://" at the beginning of the IP address). Also you should try to get LNBits to listen for HTTPS traffic - you can't just add a certificate to a site and it magically understands HTTPS traffic. Of course I used https:// before the IP address. How would I make LNBits to listen for HTTPS traffic? Change listen 5000 ssl http2 default_server; to listen 443 ssl http2 default_server; ?? proxy_pass https://localhost:5000/; # ----> directive that sets up the reverse proxy in nginx
./venv/bin/hypercorn -k trio --bind 0.0.0.0:5000 'lnbits.app:create_app()'
I think your nginx.conf should be: proxy_pass http://localhost:5000/; The Hypercorn didn't manage the SSL certs. So your Nginx passing a HTTPS request onto the Hypercorn. Try to change your Nginx conf as I suggested above, lets see if that works.
EDIT: In addition, my suggestion above would probably work if you access it from my.awesome.lnbits.site.ddns.net. Since you set up the Nginx configuration only as a reverse proxy for that domain. In another hand, the reason why it works on HTTP but not on HTTPS when you access it from the local network [192.168.1.153:5000] is because the connection didn't managed by Nginx, it comes from Hypercorn. The Nginx has no configuration for a local connection, thus the error you get is because you are accessing an HTTP site(LNBits) using an HTTPS protocol, and the Hypercorn got no idea about any SSL certs, etc. This is how I have my /etc/nginx/conf.d/my.awesome.lnbits.site.ddns.net.confssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; server { listen 443 ssl http2 default_server; listen [::]:443 ssl http2 default_server; server_name my.awesome.lnbits.site.ddns.net;
ssl_certificate /etc/nginx/ssl/my.awesome.lnbits.site.ddns.net.crt; ssl_certificate_key /etc/nginx/ssl/my.awesome.lnbits.site.ddns.net.key; ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3;
location / { proxy_pass http://localhost:5000; #root /usr/share/nginx/html; #index indext.html index.htm; } }
However, I get this error when I try to access to https://my.awesome.lnbits.site.ddns.net:5000An error occurred during a connection to 192.168.1.153:5000. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem.
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
DaveF
Legendary
Offline
Activity: 3570
Merit: 6494
Crypto Swap Exchange
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2021, 09:05:40 PM |
|
Comments below in red you have 2 web servers on the same port. That can't work. You can't have 2 services listen like that. Change the listen port on nginx to 5001 or something else and restart it and try again. server { listen 5000 ssl http2 default_server; <--- This is the port that nginx is trying to listen on listen [::]:5000 ssl http2 default_server; server_name my.awesome.lnbits.site.ddns.net; # ---------> this site name is setup in in noip.com to avoid IP changes, if they happen ssl_certificate /etc/nginx/ssl/my.awesome.lnbits.site.crt; ssl_certificate_key /etc/nginx/ssl/my.awesome.lnbits.site.key; ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3; location / { proxy_pass http://localhost:5000/; # ----> directive that sets up the reverse proxy in nginx <---But it can't since this is already on port 5000 } } You should also have some logging setup on nginx to see what else is going on: access_log /var/log/nginx/reverse-access.log; error_log /var/log/nginx/reverse-error.log; -Dave
|
|
|
|
darkv0rt3x (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2021, 10:18:01 PM |
|
Comments below in red you have 2 web servers on the same port. That can't work. You can't have 2 services listen like that. Change the listen port on nginx to 5001 or something else and restart it and try again. server { listen 5000 ssl http2 default_server; <--- This is the port that nginx is trying to listen on listen [::]:5000 ssl http2 default_server; server_name my.awesome.lnbits.site.ddns.net; # ---------> this site name is setup in in noip.com to avoid IP changes, if they happen ssl_certificate /etc/nginx/ssl/my.awesome.lnbits.site.crt; ssl_certificate_key /etc/nginx/ssl/my.awesome.lnbits.site.key; ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3; location / { proxy_pass http://localhost:5000/; # ----> directive that sets up the reverse proxy in nginx <---But it can't since this is already on port 5000 } } You should also have some logging setup on nginx to see what else is going on: access_log /var/log/nginx/reverse-access.log; error_log /var/log/nginx/reverse-error.log; -Dave log files have nothing meaningful. Just the same errors I see with sudo journalctl -eu nginx. And I tried my config file like this: ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; server { listen 5001 ssl http2 default_server; # ---> changed here to 5001, as suggested listen [::]:5001 ssl http2 default_server; # ---> changed here to 5001, as suggested server_name my.awesome.lnbits.site.ddns.net;
ssl_certificate /home/rp64/certificates/server-cert-signed.pem; ssl_certificate_key /home/rp64/certificates/server-key.pem; ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3;
location / { # ---> I'm not sure if this location doesn't have to point to the LNBits folder or if it's like that for any situation proxy_pass http://localhost:5000; #root /usr/share/nginx/html; #index indext.html index.htm; } }
But I still can't connect to https://my.awesome.lnbits.site.ddns.net:5000. I get the same error: Secure Connection Failed
An error occurred during a connection to my.awesome.lnbits.site.ddns.net:5000. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem.
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
HCP
Legendary
Offline
Activity: 2086
Merit: 4316
<insert witty quote here>
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2021, 11:02:54 PM |
|
ssl_certificate /etc/nginx/ssl/my.awesome.lnbits.site.crt; ssl_certificate_key /etc/nginx/ssl/my.awesome.lnbits.site.key;
ssl_certificate /home/rp64/certificates/server-cert-signed.pem; ssl_certificate_key /home/rp64/certificates/server-key.pem;
at some point you've also changed from using .crt/.key to using .pem... ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Have you been experimenting with the way you were creating the ssl certs? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
|
darkv0rt3x (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2021, 11:10:19 PM |
|
ssl_certificate /etc/nginx/ssl/my.awesome.lnbits.site.crt; ssl_certificate_key /etc/nginx/ssl/my.awesome.lnbits.site.key;
ssl_certificate /home/rp64/certificates/server-cert-signed.pem; ssl_certificate_key /home/rp64/certificates/server-key.pem;
at some point you've also changed from using .crt/.key to using .pem... ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Have you been experimenting with the way you were creating the ssl certs? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Openssl doesn't care about file names. It only cares about its contents, so the names are irrelevant, I guess. But the reason I changed the names, is because I've been using dummy names to keep some privacy such has server names, domains, folder structures, etc, but as I said, openssl doesn't care about file names, so the extension being .pem or .key or .crt is irrelevant! Edited; I just ran this check: $ openssl s_client -connect my.awesome.lnbits.site.ddns.net:5000 CONNECTED(00000003) 281473464457712:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../ssl/record/ssl3_record.c:331: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 5 bytes and written 312 bytes Verification: OK --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE No ALPN negotiated Early data was not sent Verify return code: 0 (ok) ---
I guess this is not good either!
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
DaveF
Legendary
Offline
Activity: 3570
Merit: 6494
Crypto Swap Exchange
|
But I still can't connect to https://my.awesome.lnbits.site.ddns.net:5000. I get the same error: Secure Connection Failed
An error occurred during a connection to my.awesome.lnbits.site.ddns.net:5000. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem.
Because nginx is now listening on 5001 not 5000 Secure Connection Failed
An error occurred during a connection to 192.168.1.153:5000. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem. Try going to https://192.168.1.153:5001 (assuming that the IP of that machine has not changed) you should get an SSL error about the name not matching but you should be able to connect. -Dave
|
|
|
|
vv181
Legendary
Offline
Activity: 1932
Merit: 1273
|
Because nginx is now listening on 5001 not 5000
and I think @OP must change the destination port on the router config as below, right? I just ran this check: ~ I guess this is not good either!
I believe it's because the site is still returning from the Hypercorn HTTP on port 5000, not from Nginx(5001). Try to change the router config destination to 5001, then visit https://my.awesome.lnbits.site.ddns.net:50001. *Edit: the domain port should be 5000 because the config source port is 5000
|
|
|
|
darkv0rt3x (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 30, 2021, 01:08:26 PM Last edit: October 30, 2021, 01:35:41 PM by darkv0rt3x |
|
But I still can't connect to https://my.awesome.lnbits.site.ddns.net:5000. I get the same error: Secure Connection Failed
An error occurred during a connection to my.awesome.lnbits.site.ddns.net:5000. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem.
Because nginx is now listening on 5001 not 5000 Secure Connection Failed
An error occurred during a connection to 192.168.1.153:5000. SSL received a record that exceeded the maximum permissible length.
Error code: SSL_ERROR_RX_RECORD_TOO_LONG
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem. Try going to https://192.168.1.153:5001 (assuming that the IP of that machine has not changed) you should get an SSL error about the name not matching but you should be able to connect. -Dave Because nginx is now listening on 5001 not 5000
and I think @OP must change the destination port on the router config as below, right? I just ran this check: ~ I guess this is not good either!
I believe it's because the site is still returning from the Hypercorn HTTP on port 5000, not from Nginx(5001). Try to change the router config destination to 5001, then visit https://my.awesome.lnbits.site.ddns.net:50001. *Edit: the domain port should be 5000 because the config source port is 5000Ohhhh it is finally working, I guess! Let me tell the setup I did... Jeezzz, when you don't know enough about networking, you get pretty messed up head aches! So, nginx config file in /etc/nginx/conf.d/my.awesome.lnbits.site.ddns.net.conf is the following: ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; server { listen 5001 ssl http2 default_server; listen [::]:5001 ssl http2 default_server; server_name my.awesome.lnbits.site.ddns.net;
ssl_certificate /home/rp64/certificates/server-cert-signed.pem; ssl_certificate_key /home/rp64/certificates/server-key.pem; ssl_protocols TLSv1.2 TLSv1.3;
location / { proxy_pass http://localhost:5000; } }
My LNBits .env files relevant line is: My router firewall config rule for LNBits is: config redirect option dest_port '5001' option src 'wan' option name 'lnbits' option src_dport '5001' option target 'DNAT' option dest_ip '192.168.1.153' option dest 'lan' option proto 'tcp'
I think this is all... But now, I would love to understand what is behind the scenes and why I had this struggle with hypercorn (I have no idea what this software does)... So, if anyone can tell me how the traffic goes around these settings and also taking into account this hypercorn thing, I would love to hear about it! Because I can't use port 5000 and I'm not sure I understand why. I mean, I think I know why, but I don't understand it. I think I can't use port 5000 because I have it in nginx config file for the reverse proxy directive proxy_pass https://localhost:5000.
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
vv181
Legendary
Offline
Activity: 1932
Merit: 1273
|
But now, I would love to understand what is behind the scenes and why I had this struggle with hypercorn (I have no idea what this software does)... So, if anyone can tell me how the traffic goes around these settings and also taking into account this hypercorn thing, I would love to hear about it! Because I can't use port 5000 and I'm not sure I understand why. I mean, I think I know why, but I don't understand it. I think I can't use port 5000 because I have it in nginx config file for the reverse proxy directive proxy_pass https://localhost:5000. In simple terms the traffic *should* goes around like this: Internet <> Router <> Nginx <> Hypercorn <> LNBits The reason why it got problems was that: 1. You are using port 5000 as a virtual server(Listening port) while port 5000 are already being used by Hypercorn(LNBits). Just like what @DaveF mention above As you've guessed. The reverse proxy directive is 5000 which it's the port brought up by Hypercorn(LNBits). So Nginx cant use port 5000, again. 2. Your initial router firewall configuration is bypassing Nginx, so, it directly connects into Hypercorn(LNBits) The dest_port should be pointed into the Nginx listen port, so it will be able to acknowledge the SSL setting. Since initially, you are using the 5000 port, either you are accessing from a local network or from the domain, it would always communicate to the HTTP site of LNBits. Using the above scheme, the traffic flow is like: Internet <> Router <> Hypercorn <> LNBits. To sum up, you are accessing LNBits, either from the domain or local [Internet], then your router firewall rule is port forwarding <IP>:5001 into 192.168.151:5001( src port, dest_ip:dest_port) [Router]. After that, the Nginx acknowledged what to do since the referred port are 5001, the one you set up, listen 5001 ssl...[Nginx]. And then it passed to Hypercorn and lastly LNBits.
|
|
|
|
DaveF
Legendary
Offline
Activity: 3570
Merit: 6494
Crypto Swap Exchange
|
Mildly OT, but basic networking simplified:
Every device on your network has an IP address. Lets use 192.168.1.100
On every address there 65,536 ports.
A program can use many ports i.e. a webserver by default listens on 80 (http) and 443 (https) BUT only 1 program can use a port at a time. So once your webserver is using 80 nothing else can. Otherwise when another computer tries to talk to that computer on that port there would be no way of knowing which program it would be talking to.
So on 192.168.1.100 you could have a webserver listening on 80 & 443 a mail server on 25 & 587 & 110 & 143 and a FTP server on 20 & 21
As for hypercorn it's a web server. So it is giving on web pages on whatever port you tell it to. In this case 5000. nginx is also a webserver. With the configuration you have it is listening on 5001 which you have encrypted and then passing everything blindly back to hypercorn on port 5000 which is unencrypted. Hypercorn then gives the info to nginx which then passes it back out to whoever connected to it on port 5001.
This keeps hypercorn isolated from the rest of the internet. There are many how to guides on how to secure / harden nginx to only allow it to pass the traffic you want passed back to hypercorn (or wherever)
A bit more detail. You can stop reading if you don't care. Tweaking nginx config can allow you to run several different webservers for different things and it will pass it pack as you tell it to in the config. So if you can have: my.website.com = A public IP address my.otherwebsite.com = the same public IP address and this.otherwebsite.com = the same ip address again
You then in your firewall pass that public IP address back to the nginx server 192.168.1.100 80
And nginx will respond to them all on 192.168.1.100 port 80 but pass: my.website.com to 192.168.1.100 port 5000 my.otherwebsite.com 192.168.1.100 port 5000 this.otherwebsite.com another site someplace else on the internet
Probably more in depth then you needed but now you know. As for why nginx as the public side and not hypercorn. It's just because it's a much more developed product that does a lot more.
-Dave
|
|
|
|
darkv0rt3x (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2021, 09:00:02 AM |
|
...
2. Your initial router firewall configuration is bypassing Nginx, so, it directly connects into Hypercorn(LNBits)
...
After reading @DaveF post, I'm not sure I understand this. @DaveF says that internet is passing traffic to Nginx (encrypted) and then Nginx passes it to Hypercorn (unencrypted) and then, Hypercorn passes it back to Nginx again and finally Nginx passes it back to whatever application is listening on that port. You say my router firewall is bypassing Nginx. I'm not sure I understand. Sorry. @DaveF From your post. Yes, the first part, I am aware. I mean, in a home network, all devices have their (what I call) internal IPs in some range like 192.168.1.1 up to 192.168.1.something. And each application in each device can listen in a port from (usually) >1024 up to 65534, since below 1024 there are default listening ports for pre-defined services such has ssh (21), ftp (22), http (80), https (443), etc, etc... But regarding the traffic flow in this case, I was not expecting that Hypercorn passes back to Nginx unencrypted data. I thought it would be Internet -> Nginx -> Hypercorn -> LNBits instead of Internet -> Nginx -> Hypercorn -> Nginx -> LNBits. Why there is this additional data forwarding from Hypercorn to Nginx.
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
DaveF
Legendary
Offline
Activity: 3570
Merit: 6494
Crypto Swap Exchange
|
But regarding the traffic flow in this case, I was not expecting that Hypercorn passes back to Nginx unencrypted data. I thought it would be Internet -> Nginx -> Hypercorn -> LNBits instead of Internet -> Nginx -> Hypercorn -> Nginx -> LNBits.
Why there is this additional data forwarding from Hypercorn to Nginx.
In theory there should never be any direct communication between nginx & LNBits. Nginx should only talk to Hypercorn and LNBits should only talk to Hypercorn Internet <--> nginx <--> Hypercorn <--> LNBits 5001 <--> 5001<-->5000 <--> 5000 <--> whatever / however hypercorn talks to LNBits However, if you have your firewall set to pass traffic from the internet to Hypercorn (port 5000) this entire process falls apart. Since now I can see hypercorn in the world. -Dave
|
|
|
|
HCP
Legendary
Offline
Activity: 2086
Merit: 4316
<insert witty quote here>
|
But regarding the traffic flow in this case, I was not expecting that Hypercorn passes back to Nginx unencrypted data. I thought it would be Internet -> Nginx -> Hypercorn -> LNBits instead of Internet -> Nginx -> Hypercorn -> Nginx -> LNBits.
Why there is this additional data forwarding from Hypercorn to Nginx.
There isn't... it just perhaps wasn't explained very well.... and possibly the <---> isn't the best way to show things either. Essentially you have "inbound" traffic flow that goes: Internet ---> nginx (port 5001) ---> Hypercorn (Port 5000) ---> LNBits Then the outbound flow that goes: LNBits ---> Hypercorn ---> nginx ---> Internet nginx is essentially receiving the inbound packets passing them to Hypercorn to do whatever it needs to do with them (pass to LNBits, dump, return webpage etc)... Hypercorn then passes it's response back to nginx, which then passes them back to wherever they need to be going on "The internet"™.
|
|
|
|
darkv0rt3x (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2021, 10:46:41 PM |
|
But regarding the traffic flow in this case, I was not expecting that Hypercorn passes back to Nginx unencrypted data. I thought it would be Internet -> Nginx -> Hypercorn -> LNBits instead of Internet -> Nginx -> Hypercorn -> Nginx -> LNBits.
Why there is this additional data forwarding from Hypercorn to Nginx.
There isn't... it just perhaps wasn't explained very well.... and possibly the <---> isn't the best way to show things either. Essentially you have "inbound" traffic flow that goes: Internet ---> nginx (port 5001) ---> Hypercorn (Port 5000) ---> LNBits Then the outbound flow that goes: LNBits ---> Hypercorn ---> nginx ---> Internet nginx is essentially receiving the inbound packets passing them to Hypercorn to do whatever it needs to do with them (pass to LNBits, dump, return webpage etc)... Hypercorn then passes it's response back to nginx, which then passes them back to wherever they need to be going on "The internet"™. Yes, I understood it from @DaveF's post. It makes sense now when someone tells it like in plain text like @DaveF did. Technically, I still struggled to undderstand things the way @vv181 explained. But the 2 replies together, made it more clear, I think. The thing is that there is little explanation on how to set things up if you don't want to use 3rd party applications like Caddy, because apparently, Caddy does part of this job for you automatically!
|
Bitcoin is energy. Bitcoin is freedom I rather die on my feet than living on my knees!
|
|
|
vv181
Legendary
Offline
Activity: 1932
Merit: 1273
|
2. Your initial router firewall configuration is bypassing Nginx, so, it directly connects into Hypercorn(LNBits)
You say my router firewall is bypassing Nginx. I'm not sure I understand. Sorry. Do note what @DaveF said: However, if you have your firewall set to pass traffic from the internet to Hypercorn (port 5000) this entire process falls apart. Since now I can see hypercorn in the world. Technically; What he means and also I said the word "initial", it pointed to: config redirect option dest_port '5000' option src 'wan' option name 'lnbits' option src_dport '5000' option target 'DNAT' option dest_ip '192.168.1.153' option dest 'lan' option proto 'tcp' With above config, the internet is directly communicating with Hypercorn. It's because the dest_port is pointed to Hypercorn port, 5000. But since you are now using the correct config: The current and correct internet flow is as described by @HCP. After reading @DaveF post, I'm not sure I understand this. @DaveF says that internet is passing traffic to Nginx (encrypted) and then Nginx passes it to Hypercorn (unencrypted) and then, Hypercorn passes it back to Nginx again and finally Nginx passes it back to whatever application is listening on that port.
Regarding that, What *I think* he explains is he taking the context of the correct firewall rule config. and it is furtherly explained well by HCP.
Anyway, sometimes I have a hard time to wording and explaining a technical term, so I hope you bear with me ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|
|