S9 Zeroes Missing on Asic Status of Two Hashboards

[mininghobbiesthodl]

Both Chain 6 and 7 are missing zeroes benath the Asic status column and wondering if anyone has had a similar issue and knew of a fix?  Below is my kernal log.

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0
• 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 - 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 - 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 - 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000292] ps7-ttc #0 at df804000, irq=43
[    0.000592] Console: colour dummy device 80x30
[    0.000622] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040197] pid_max: default: 32768 minimum: 301
[    0.040406] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040426] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042634] CPU: Testing write buffer coherency: ok
[    0.042956] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043013] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[    0.043233] L310 cache controller enabled
[    0.043253] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120987] CPU1: Booted secondary processor
[    0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210347] Brought up 2 CPUs
[    0.210366] SMP: Total of 2 processors activated.
[    0.210374] CPU: All CPU(s) started in SVC mode.
[    0.211034] devtmpfs: initialized
[    0.213484] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214690] regulator-dummy: no parameters
[    0.222154] NET: Registered protocol family 16
[    0.224383] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226656] cpuidle: using governor ladder
[    0.226669] cpuidle: using governor menu
[    0.234095] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235621] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235635] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235744] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.258097] bio: create slab <bio-0> at 0
[    0.259479] vgaarb: loaded
[    0.260171] SCSI subsystem initialized
[    0.261205] usbcore: registered new interface driver usbfs
[    0.261376] usbcore: registered new interface driver hub
[    0.261601] usbcore: registered new device driver usb
[    0.262124] media: Linux media interface: v0.10
[    0.262288] Linux video capture interface: v2.00
[    0.262529] pps_core: LinuxPPS API ver. 1 registered
[    0.262540] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262670] PTP clock support registered
[    0.263020] EDAC MC: Ver: 3.0.0
[    0.264081] Advanced Linux Sound Architecture Driver Initialized.
[    0.266819] DMA-API: preallocated 4096 debug entries
[    0.266832] DMA-API: debugging enabled by kernel config
[    0.266909] Switched to clocksource arm_global_timer
[    0.287580] NET: Registered protocol family 2
[    0.288240] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.288297] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288382] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288423] TCP: reno registered
[    0.288440] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288472] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288707] NET: Registered protocol family 1
[    0.289045] RPC: Registered named UNIX socket transport module.
[    0.289057] RPC: Registered udp transport module.
[    0.289065] RPC: Registered tcp transport module.
[    0.289073] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289087] PCI: CLS 0 bytes, default 64
[    0.289524] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291532] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293615] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293820] msgmni has been set to 967
[    0.294607] io scheduler noop registered
[    0.294620] io scheduler deadline registered
[    0.294661] io scheduler cfq registered (default)
[    0.306272] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.306292] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.429626] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.997349] console [ttyPS0] enabled
[    1.001600] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.009232] [drm] Initialized drm 1.1.0 20060810
[    1.026224] brd: module loaded
[    1.035605] loop: module loaded
[    1.045078] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.051066] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.058835] libphy: XEMACPS mii bus: probed
[    1.063207] ------------- phy_id = 0x3625e62
[    1.068088] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.076651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.083298] ehci-pci: EHCI PCI platform driver
[    1.090571] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.097459] usbcore: registered new interface driver usb-storage
[    1.104295] mousedev: PS/2 mouse device common for all mice
[    1.110426] i2c /dev entries driver
[    1.117319] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.122796] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.128714] Xilinx Zynq CpuIdle Driver started
[    1.133551] sdhci: Secure Digital Host Controller Interface driver
[    1.139756] sdhci: Copyright(c) Pierre Ossman
[    1.144025] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.150845] mmc0: no vqmmc regulator found
[    1.154861] mmc0: no vmmc regulator found
[    1.196926] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205627] usbcore: registered new interface driver usbhid
[    1.211146] usbhid: USB HID core driver
[    1.215853] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222145] nand: Micron MT29F2G08ABAEAWP
[    1.226115] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232065] Bad block table found at page 131008, version 0x01
[    1.238313] Bad block table found at page 130944, version 0x01
[    1.244359] 3 ofpart partitions found on MTD device pl353-nand
[    1.250130] Creating 3 MTD partitions on "pl353-nand":
[    1.255236] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263268] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270631] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279337] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[    1.285858] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.291175] TCP: cubic registered
[    1.294410] NET: Registered protocol family 17
[    1.299120] Registering SWP/SWPB emulation handler
[    1.305025] regulator-dummy: disabling
[    1.309388] UBI: attaching mtd1 to ubi0
[    1.836361] UBI: scanning is finished
[    1.847984] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.855041] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.861837] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.868514] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.875352] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.881361] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.888472] UBI: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 1925294910
[    1.897502] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.906701] UBI: background thread "ubi_bgt0d" started, PID 1085
[    1.906706] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.910762] ALSA device list:
[    1.910765]   No soundcards found.
[    1.927064] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[    1.990831] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.996756] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.005897] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.015775] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.020847] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D2E2157C-794A-4932-956B-E22078A65162, small LPT model
[    2.032562] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.040219] devtmpfs: mounted
[    2.043330] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[    2.879804] random: dd urandom read with 0 bits of entropy available
[    3.266953]
[    3.266953] bcm54xx_config_init
[    3.876952]
[    3.876952] bcm54xx_config_init
[    7.877777] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.883882] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   36.371133] In axi fpga driver!
[   36.374204] request_mem_region OK!
[   36.377622] AXI fpga dev virtual address is 0xdfa10000
[   36.382702] *base_vir_addr = 0xc51e
[   36.397410] In fpga mem driver!
[   36.400689] request_mem_region OK!
[   36.404250] fpga mem virtual address is 0xe2000000
[   37.284886]
[   37.284886] bcm54xx_config_init
[   37.934815]
[   37.934815] bcm54xx_config_init
[   41.935241] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   41.941342] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[  652.108586] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=650 Chain[5] voltage_pic=108 value=880
Fix freq=650 Chain[6] voltage_pic=108 value=880
Fix freq=650 Chain[7] voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
Chain[J6] has no freq in PIC, set default freq=650M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=650M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=650M
Chain[J8] has no core num in PIC

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=26
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650
Chain:5 max freq=650
Chain:5 min freq=650

read PIC voltage=940 on chain[6]
Chain:6 chipnum=22
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650
Chain:6 max freq=650
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=62
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650
Chain:7 max freq=650
Chain:7 min freq=650

max freq = 650
set baud=1
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=880 [108]
Chain[J8] set working voltage=880 [108]
setStartTimePoint total_tv_start_sys=1417 total_tv_end_sys=1418
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Done read temp on Chain[5]
do read temp on Chain[6]
Done read temp on Chain[6]
do read temp on Chain[7]
Done read temp on Chain[7]
All temp chips failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=23708

[NotFuzzyWarm]

PLEASE edit your post to use the code tag from the toolbar. It looks like this #
Text walls are very hard to follow, using the code tag changes that into a much more readable scrollable box format.

[BitMaxz]

There are lots of CSC errors and yeah there are lots of missing chips on two dashboards.

Would you mind to try check all the hashboard physically it might have a loose heatsink then try to test all hashboard one by one you can follow the guide from this link below to find the defective hashboard.

- https://support.bitmain.com/hc/en-us/articles/226142788-Test-hash-board-one-by-one

Also, don't forget to check the fan.

[mikeywith]

Well, in fact, all 3 hash boards are missing zeros, you just couldn't notice the last one because it's missing a single chip.

When you carefully browser through the kernel log you will see the chip count test states the following.

Code:

Chain[J6] has 26 asic
Chain[J7] has 22 asic
Chain[J8] has 62 asic

The complete chip count for all S9 miners (excluding S9k and SE versions) is 63 asic, J8 will work fine with 1 missing chip, actually, even boards showing 54 chips will work fine (the hash board is divided into sub-domains only certain chip failure will pass the test), the other two showings 26 and 22 will most likely not produce any hashrate, the most likely scenario for this issue is physical damage to one or more of the chips.

The problem is usually beyond fixing, but trying different firmware, PSU and all that might fix it.