Avalon A921 Blue and green Light but not hashing

Hello guys,

I am stuck! I have purchased 17 A921 for 2 months now and still can’t get them to work Cry

Using the raspberry bi3 controller that came with them, when I connect the device I can access the software but I see 0 hashrate! I have tried 4 different pools but non of them show my miners. The light on the back of the machine is blue and the auc is green but still no hashing at all.

Guys I am very very disappointed and this is my last shot at a fix.

Thank you 🙏🏽

Here is the code I get:
[Firmware Version] => Avalon Firmware for avalon9 - 20190301
luci: 815f8ca
cgminer: a60adfc
cgminer-packages: 1714e12
Reply was 'STATUS=S,When=1500207521,Code=70,Msg=CGMiner stats,Description=cgminer 4.10.0|STATS=0,ID=AV90,Elapsed=30,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM ID1=Ver[9211809-b150820]
DNA[013ebf5b3d524f76]
Elapsed[36]
MW[8021 8092 8152 8223]
LW[32488]
MH[0 0 0 0]
HW[0]
DH[0.000%]
Temp[17]
TMax[37]
Fan[1500]
FanR[10%]
Vi[1218 1218 1214 1214]
Vo[4167 4179 4165 4177]
GHSmm[0.00]
WU[0.00]
Freq[0.00]
PG[15]
Led[0]
MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW3[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
TA[104]
ECHU[512 512 512 512]
ECMM[0]
FM[1]
CRC[0 0 0 0],MM Count=1,Smart Speed=1,Connecter=AUC,AUC VER=AUC-20151208,AUC I2C Speed=400000,AUC I2C XDelay=24000,AUC Sensor=17580,AUC Temperature=21.71,Connection Overloaded=false,Voltage Level Offset=0,Nonce Mask=24,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=30,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=131072.00000000,Min Diff=131072.00000000,Max Diff=131072.00000000,Min Diff Count=20,Max Diff Count=20,Times Sent=2,Bytes Sent=151,Times Recv=5,Bytes Recv=3241,Net Bytes Sent=151,Net Bytes Recv=3241|STATS=2,ID=POOL1,Elapsed=30,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=131072.00000000,Min Diff=131072.00000000,Max Diff=131072.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=2,Bytes Sent=151,Times Recv=4,Bytes Recv=1727,Net Bytes Sent=151,Net Bytes Recv=1727|STATS=3,ID=POOL2,Elapsed=30,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=131072.00000000,Min Diff=131072.00000000,Max Diff=131072.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=2,Bytes Sent=151,Times Recv=4,Bytes Recv=1727,Net Bytes Sent=151,Net Bytes Recv=1727|'
[STATUS] =>
(
[STATUS] => S
[When] => 1500207521

Code:

 => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 4.10.0
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => AV90
   [Elapsed] => 30
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [MM ID1] => Ver[9211809-b150820]
    DNA[013ebf5b3d524f76]
    Elapsed[36]
    MW[8021 8092 8152 8223]
    LW[32488]
    MH[0 0 0 0]
    HW[0]
    DH[0.000%]
    Temp[17]
    TMax[37]
    Fan[1500]
    FanR[10%]
    Vi[1218 1218 1214 1214]
    Vo[4167 4179 4165 4177]
    GHSmm[0.00]
    WU[0.00]
    Freq[0.00]
    PG[15]
    Led[0]
    MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
    MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
    MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
    MW3[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
    TA[104]
    ECHU[512 512 512 512]
    ECMM[0]
    FM[1]
    CRC[0 0 0 0]
   [MM Count] => 1
   [Smart Speed] => 1
   [Connecter] => AUC
   [AUC VER] => AUC-20151208
   [AUC I2C Speed] => 400000
   [AUC I2C XDelay] => 24000
   [AUC Sensor] => 17580
   [AUC Temperature] => 21.71
   [Connection Overloaded] => false
   [Voltage Level Offset] => 0
   [Nonce Mask] => 24
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
   [USB tmo] => 0 0
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 30
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 131072.00000000
   [Min Diff] => 131072.00000000
   [Max Diff] => 131072.00000000
   [Min Diff Count] => 20
   [Max Diff Count] => 20
   [Times Sent] => 2
   [Bytes Sent] => 151
   [Times Recv] => 5
   [Bytes Recv] => 3241
   [Net Bytes Sent] => 151
   [Net Bytes Recv] => 3241
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL1
   [Elapsed] => 30
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 131072.00000000
   [Min Diff] => 131072.00000000
   [Max Diff] => 131072.00000000
   [Min Diff Count] => 1
   [Max Diff Count] => 1
   [Times Sent] => 2
   [Bytes Sent] => 151
   [Times Recv] => 4
   [Bytes Recv] => 1727
   [Net Bytes Sent] => 151
   [Net Bytes Recv] => 1727
)
[STATS3] =>
(
   [STATS] => 3
   [ID] => POOL2
   [Elapsed] => 30
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 131072.00000000
   [Min Diff] => 131072.00000000
   [Max Diff] => 131072.00000000
   [Min Diff Count] => 1
   [Max Diff Count] => 1
   [Times Sent] => 2
   [Bytes Sent] => 151
   [Times Recv] => 4
   [Bytes Recv] => 1727
   [Net Bytes Sent] => 151
   [Net Bytes Recv] => 1727
)

I have lots of Avalon guides which can also be applied for the 9 series.
Please have a look at them.

The links are in my signature space.

Hi there,

Thank you for your reply but I have checked these guides already! Nothing found as far as solving my problem. because I have all access to the config, everything is set right, lights are good.. but still no hashing Cry

Can you post a screenshot showing your pool settings?

You can blur out the username details...

Sorry for the delay I thought I was blocked or something! It’s the 360s thing that I didn’t know of

https://ibb.co/Tm52h9B

F2pool has had some issues lately because of DNS pollution.

Can you give some other pool a try?

Would you mind trying the ViaBTC pool and use the new domain because their .com might be still affected by the DNS issue.

Login on viabtc.net and go to pool>dashboard scroll down and look mining guide or use this pool below

Code:

stratum+tcp://btc.viabtc.top:3333
stratum+tcp://btc.viabtc.top:25
stratum+tcp://btc.viabtc.top:443

Yeah, you will notice the domain extension is different but it's their new domain so don't worry.

I have tried 3 differnet pools: Slushpool, f2pool, binance pool. I will try the one recommended in the comments as well I guess but I don't think it will be much different Cry

I have used Viabtc but still nothing guys

https://ibb.co/2tNQnrJ
https://ibb.co/RvGjS2m

Cry

pls help

Are you sure it is able to access internet?
Have you turned on DHCP on the miner?
You need it turned on if your router gives devices an ipp address automatically from it's DHCP pool.

And are you sure that you don't live in a country in which ISP restricts mining?

Okay so there is a small update! Possible hope Shocked

I see some numbers now https://ibb.co/X34P51Z

Also, in the Network section it's set to "Static" should i switch it to DHCP?

The miner is in Libya

I don't know your router and it's settings, so it's impossible to answer that question.

Usually routers bought from shop come predefined with DHCP (automatic ip addresses) turned on, at least here in Finland. You need to understand your router settings to be sure about it.

Does Libya and it's ISP operators restrict mining?

Quote from: anasnannis@gmail.com on December 08, 2021, 04:07:53 PM

Also, in the Network section it's set to "Static" should i switch it to DHCP?

It must be set to DHCP that is why it can't connect to the pool server or to the internet it's because of IP conflict and maybe there is another device using the same IP that stops your miner from connecting to the internet.

So you must set it to DHCP to make sure the miner is using unique IP from your router or if you know your router setup you can stay use static and set the IP manually, make sure no other devices use the same IP to avoid IP conflict.

Yep, I presume his router has DHCP turned on even though he's not sure himself, so that means that also the miner needs DHCP turned on for it to work.

I already tried to include this network setting check up by directing him to see through my guides but I only got "I ALREADY READ THEM" for an answer.

I have changed the settings in my miner to DHCP, but now i cant access the interface. I read online and they said I have to change some settings in the router but I am not sure what?

here is a pic of my router DHCP Settings:
https://ibb.co/W68s6Nr

FYI, YESSSS I did read your guides man! but when you can't find a solution for months, you start changing settings and that's why I switched to STATIC. It was at DHCP before and still no luck.

Can you find a status page for Local Area Network (LAN) in the router?

You should see the miner ip address there.

The only thing I can see connected is the laptop I am using which is via wifi .. The controller is connected via ethernet and it says connected but wont show me IP Cry

https://ibb.co/SKCNtR4
https://ibb.co/sgsFqqf

That Ethernet status page is wrong page to look for status of connected clients. It must be some other page.

You can also use Advanced IP Scanner in case your router is bot in a co-operative mood.

Hey again, I have used the ip software and found the ip for it and accessed the interface. Thanks

But nothing is working: https://ibb.co/Ycyw3NH

Also now the Miner led is yellow and the AUC is Blue

How many avalons you have in one AUC chain?

Have you took advice for the setup from here for example? -->
https://bitcointalk.org/index.php?topic=5044027
(part "How to do a setup for twenty miners and one controller unit")

Is your Raspberry Pi powered by a "5 V_DC 2.4 A USB wall wart" ?