PanTheo91 (OP)
Newbie
 Offline
Activity: 28
Merit: 4
|
 |
December 31, 2021, 05:46:00 PM |
|
Hello everyone and Happy New Year. Suddenly one of my S9J hashboards stop working and doing some weird stuff. Below is the kernel log. [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06e8cf4 (7044 kB)
[ 0.000000] .init : 0xc06e9000 - 0xc071d480 ( 210 kB)
[ 0.000000] .data : 0xc071e000 - 0xc0767058 ( 293 kB)
[ 0.000000] .bss : 0xc0767064 - 0xc07a7d64 ( 260 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000013] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000288] ps7-ttc #0 at df804000, irq=43
[ 0.000587] Console: colour dummy device 80x30
[ 0.000616] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040196] pid_max: default: 32768 minimum: 301
[ 0.040403] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040422] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042598] CPU: Testing write buffer coherency: ok
[ 0.042907] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042964] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[ 0.043185] L310 cache controller enabled
[ 0.043204] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120984] CPU1: Booted secondary processor
[ 0.210214] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210342] Brought up 2 CPUs
[ 0.210361] SMP: Total of 2 processors activated.
[ 0.210369] CPU: All CPU(s) started in SVC mode.
[ 0.211044] devtmpfs: initialized
[ 0.213494] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214690] regulator-dummy: no parameters
[ 0.222081] NET: Registered protocol family 16
[ 0.224292] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226565] cpuidle: using governor ladder
[ 0.226578] cpuidle: using governor menu
[ 0.233971] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235495] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235508] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235615] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257996] bio: create slab <bio-0> at 0
[ 0.259372] vgaarb: loaded
[ 0.260066] SCSI subsystem initialized
[ 0.261212] usbcore: registered new interface driver usbfs
[ 0.261389] usbcore: registered new interface driver hub
[ 0.261614] usbcore: registered new device driver usb
[ 0.262135] media: Linux media interface: v0.10
[ 0.262291] Linux video capture interface: v2.00
[ 0.262529] pps_core: LinuxPPS API ver. 1 registered
[ 0.262541] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262663] PTP clock support registered
[ 0.263014] EDAC MC: Ver: 3.0.0
[ 0.264066] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266806] DMA-API: preallocated 4096 debug entries
[ 0.266819] DMA-API: debugging enabled by kernel config
[ 0.266892] Switched to clocksource arm_global_timer
[ 0.288085] NET: Registered protocol family 2
[ 0.288734] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.288791] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288876] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288923] TCP: reno registered
[ 0.288940] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288971] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.289202] NET: Registered protocol family 1
[ 0.289533] RPC: Registered named UNIX socket transport module.
[ 0.289545] RPC: Registered udp transport module.
[ 0.289553] RPC: Registered tcp transport module.
[ 0.289562] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289573] PCI: CLS 0 bytes, default 64
[ 0.289998] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291969] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.294026] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.294220] msgmni has been set to 967
[ 0.294984] io scheduler noop registered
[ 0.294997] io scheduler deadline registered
[ 0.295037] io scheduler cfq registered (default)
[ 0.302645] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.302666] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.428054] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.995741] console [ttyPS0] enabled
[ 0.999989] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.007617] [drm] Initialized drm 1.1.0 20060810
[ 1.024585] brd: module loaded
[ 1.033972] loop: module loaded
[ 1.043374] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.049362] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.057131] libphy: XEMACPS mii bus: probed
[ 1.061502] ------------- phy_id = 0x3625e62
[ 1.066211] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.074831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.081667] ehci-pci: EHCI PCI platform driver
[ 1.088895] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.095698] usbcore: registered new interface driver usb-storage
[ 1.102575] mousedev: PS/2 mouse device common for all mice
[ 1.108693] i2c /dev entries driver
[ 1.115574] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.121097] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.127003] Xilinx Zynq CpuIdle Driver started
[ 1.131843] sdhci: Secure Digital Host Controller Interface driver
[ 1.137995] sdhci: Copyright(c) Pierre Ossman
[ 1.142278] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.149138] mmc0: no vqmmc regulator found
[ 1.153149] mmc0: no vmmc regulator found
[ 1.196914] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205593] usbcore: registered new interface driver usbhid
[ 1.211095] usbhid: USB HID core driver
[ 1.215799] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222091] nand: Micron MT29F2G08ABAEAWP
[ 1.226060] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232011] Bad block table found at page 131008, version 0x01
[ 1.238236] Bad block table found at page 130944, version 0x01
[ 1.244287] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250072] Creating 3 MTD partitions on "pl353-nand":
[ 1.255164] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263214] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270524] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279253] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[ 1.285777] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.291092] TCP: cubic registered
[ 1.294320] NET: Registered protocol family 17
[ 1.299048] Registering SWP/SWPB emulation handler
[ 1.304939] regulator-dummy: disabling
[ 1.309300] UBI: attaching mtd1 to ubi0
[ 1.836920] UBI: scanning is finished
[ 1.848546] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.855603] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.862398] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.869075] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.875913] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.881923] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.889033] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 768485946
[ 1.897977] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.907193] UBI: background thread "ubi_bgt0d" started, PID 1085
[ 1.907198] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.911143] ALSA device list:
[ 1.911147] No soundcards found.
[ 1.927489] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[ 1.956539] UBIFS: recovery needed
[ 2.036152] UBIFS: recovery completed
[ 2.039827] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.045755] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.054913] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.064782] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.069815] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E215D0B0-FA6F-4ECF-A946-F9E82D00BE06, small LPT model
[ 2.080869] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.087616] devtmpfs: mounted
[ 2.090725] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[ 2.922438] random: dd urandom read with 0 bits of entropy available
[ 3.346953]
[ 3.346953] bcm54xx_config_init
[ 4.406922]
[ 4.406922] bcm54xx_config_init
[ 7.407770] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.413856] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 25.184646] In axi fpga driver!
[ 25.187750] request_mem_region OK!
[ 25.191109] AXI fpga dev virtual address is 0xdf9fc000
[ 25.196216] *base_vir_addr = 0xc51e
[ 25.211559] In fpga mem driver!
[ 25.214627] request_mem_region OK!
[ 25.218228] fpga mem virtual address is 0xe2000000
[ 26.006909]
[ 26.006909] bcm54xx_config_init
[ 27.096935]
[ 27.096935] bcm54xx_config_init
[ 30.097778] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 30.103797] xemacps e000b000.ps7-ethernet: link up (100/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fbe000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5db7000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 81140dca18c08814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x00000080
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=108 on chain[7], value=880
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 1
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 1, total chain num = 1
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1827 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:37:39 CST 2019 type: Antminer S9
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 81140dca18c08814
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:13148:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0a 0x4f 0x00 0x4f 0x03 0x4f 0x01 0x4f 0x05 0x4f 0x08 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J8] has backup chain_voltage=880
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 1
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J8] original chain_voltage_value=880 adjusted chain_voltage_value:880, value=880
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J8] has 75 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 76 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 75 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 28 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 79 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 84 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 69 asic
driver-btm-c5.c:4543:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4583:set_frequency: miner total rate=4890GH/s ideal_total_hash_rate = 4500GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[7]
driver-btm-c5.c:4610:set_frequency: Chain:7 chipnum=69
driver-btm-c5.c:4630:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:7 base freq=100
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681 Asic[63]:200
Asic[64]:200 Asic[65]:200 Asic[66]:200 Asic[67]:200 Asic[68]:200
driver-btm-c5.c:4821:set_frequency: Chain:7 max freq=681
driver-btm-c5.c:4822:set_frequency: Chain:7 min freq=200
driver-btm-c5.c:4831:set_frequency: Miner fix freq ...
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[7]
driver-btm-c5.c:4867:set_frequency: Chain:7 chipnum=69
driver-btm-c5.c:4886:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:7 base freq=100
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681 Asic[63]:200
Asic[64]:200 Asic[65]:200 Asic[66]:200 Asic[67]:200 Asic[68]:200
driver-btm-c5.c:5122:set_frequency: Chain:7 max freq=681
driver-btm-c5.c:5123:set_frequency: Chain:7 min freq=200
driver-btm-c5.c:5131:set_frequency: max freq = 681
driver-btm-c5.c:4149:ProcessFixFreq: totalRate = 4890, fixed_totalRate = 4500
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 880
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=168 total_tv_end_sys=169
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled...
util.c:3207:initiate_stratum: mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/4500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 2, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/4500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 3, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/4500"]}
Error: check_asic_reg 0x08 timeout
driver-btm-c5.c:8738:read_temp_func: bring_up_pcb_temp = -100
do read_temp_func once...
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=36028797.002000 Asic[02]=36028797.002000 Asic[03]=36028797.002000 Asic[04]=31672534.097000 Asic[05]=36028797.002000 Asic[06]=13617456.241000 Asic[07]=36028797.002000 Asic[08]=9817496.374000
Asic[09]=4294688.425000 Asic[10]=1390431.791000 Asic[11]=19421206.725000 Asic[12]=18236504.170000 Asic[13]=36028797.002000 Asic[14]=36028797.002000 Asic[15]=2569008.951000 Asic[16]=36028797.002000
Asic[17]= 279577 Asic[18]=36028797.002000 Asic[19]=4961549.441000 Asic[20]= 140742 Asic[21]=36028797.002000 Asic[22]=36028797.002000 Asic[23]=4134711.328000 Asic[24]=19140392.905000
Asic[25]= 278035 Asic[26]=9078686.569000 Asic[27]=824.633 Asic[28]=18087361.413000 Asic[29]=27233395.268000 Asic[30]=4.27800 Asic[31]=16886302.515000 Asic[32]=36028797.002000
Asic[33]=36028797.002000 Asic[34]= 108237 Asic[35]= 377272 Asic[36]= 212176 Asic[37]=36028797.002000 Asic[38]=36028797.002000 Asic[39]=36028797.002000 Asic[40]=36028797.002000
Asic[41]=36028797.002000 Asic[42]=36028797.002000 Asic[43]=3660033.590000 Asic[44]=36028797.002000 Asic[45]=36028797.002000 Asic[46]=36028797.002000 Asic[47]=36028797.002000 Asic[48]=36028797.002000
Asic[49]=36028797.002000 Asic[50]=0.00000 Asic[51]=36028797.002000 Asic[52]=36028797.002000 Asic[53]=18016223.602000 Asic[54]=36028797.002000 Asic[55]=21454736.033000 Asic[56]=36028797.002000
Asic[57]=36028797.002000 Asic[58]=36028797.002000 Asic[59]=36028797.002000 Asic[60]=36028797.002000 Asic[61]= 533259 Asic[62]=35882291.305000 Asic[63]=18260761.591000
Done check_asic_reg
Done read temp on Chain[7]
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=-100 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=39993 And here is the photo https://imgur.com/zvSKtDK. Thanks for your time. |
|
|
|
|
|
|
|
Remember that Bitcoin is still beta software. Don't put all of your money into BTC!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
BitMaxz
Legendary
Offline
Activity: 3234
Merit: 2942
Block halving is coming.
|
 |
December 31, 2021, 06:15:14 PM |
|
Based on what I see you have a problem about Fan signal according to this log it means your miner can't detect the power signal from your fan. Can you try to replug all fan cables and test it again if it could fix your issue? If the kernel logs still show the same would you mind to try jumpering the blue wire from the fan directly to the control board? Let see it would help fix your issue. |
|
|
|
PanTheo91 (OP)
Newbie
Offline
Activity: 28
Merit: 4
|
|
January 01, 2022, 01:29:01 AM |
|
Based on what I see you have a problem about Fan signal according to this log it means your miner can't detect the power signal from your fan. Can you try to replug all fan cables and test it again if it could fix your issue? If the kernel logs still show the same would you mind to try jumpering the blue wire from the fan directly to the control board? Let see it would help fix your issue. Thank you for your reply . Fans seems that working fine and detected by the control board because the other 2 hashboards that are connected working fine. Any ideas? |
|
|
|
|
philipma1957
Legendary
 Online
Activity: 4102
Merit: 7764
'The right to privacy matters'
|
|
January 01, 2022, 01:43:07 AM |
|
detach that board from power jacks and white data cable.
leave it in the case.
run the other two boards.
If the gear works with two boards show us a photo and the log with the good boards.
I think the board is likely shot first choice
so do the test I said and let us see the results
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2212
Merit: 6359
be constructive or S.T.F.U
|
|
January 01, 2022, 06:25:47 AM |
|
The resolution of the image you uploaded is very bad, is your gear really showing 69 asic for this hash board? Can you flash a different firmware?
|
|
|
|
PanTheo91 (OP)
Newbie
Offline
Activity: 28
Merit: 4
|
|
January 01, 2022, 02:04:54 PM |
|
The resolution of the image you uploaded is very bad, is your gear really showing 69 asic for this hash board? Can you flash a different firmware?
Yes that's really strange, S9 hashboards have 63 asics and sometimes it shown 69-72-80 asic. I installed the latest firmware from bitmain website. Also yes the 2 hashboards working perfect if i unplug the bad one i am talking about. At first i thought it would be the psu and i replace it then i replace the IO cables as well still doing the same. Here is the kernel log from the 2 working hashboards and the image that working fine since 23 days. https://imgur.com/a/L5OZmsH[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06e8cf4 (7044 kB)
[ 0.000000] .init : 0xc06e9000 - 0xc071d480 ( 210 kB)
[ 0.000000] .data : 0xc071e000 - 0xc0767058 ( 293 kB)
[ 0.000000] .bss : 0xc0767064 - 0xc07a7d64 ( 260 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000289] ps7-ttc #0 at df804000, irq=43
[ 0.000588] Console: colour dummy device 80x30
[ 0.000617] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040194] pid_max: default: 32768 minimum: 301
[ 0.040402] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040421] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042600] CPU: Testing write buffer coherency: ok
[ 0.042913] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042968] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[ 0.043188] L310 cache controller enabled
[ 0.043207] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120985] CPU1: Booted secondary processor
[ 0.210215] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210346] Brought up 2 CPUs
[ 0.210365] SMP: Total of 2 processors activated.
[ 0.210373] CPU: All CPU(s) started in SVC mode.
[ 0.211029] devtmpfs: initialized
[ 0.213477] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214668] regulator-dummy: no parameters
[ 0.221580] NET: Registered protocol family 16
[ 0.223787] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226062] cpuidle: using governor ladder
[ 0.226076] cpuidle: using governor menu
[ 0.233452] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.234972] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.234986] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235093] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257282] bio: create slab <bio-0> at 0
[ 0.258650] vgaarb: loaded
[ 0.259338] SCSI subsystem initialized
[ 0.260243] usbcore: registered new interface driver usbfs
[ 0.260588] usbcore: registered new interface driver hub
[ 0.260826] usbcore: registered new device driver usb
[ 0.262283] media: Linux media interface: v0.10
[ 0.262443] Linux video capture interface: v2.00
[ 0.262695] pps_core: LinuxPPS API ver. 1 registered
[ 0.262706] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262831] PTP clock support registered
[ 0.263182] EDAC MC: Ver: 3.0.0
[ 0.264233] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266962] DMA-API: preallocated 4096 debug entries
[ 0.266976] DMA-API: debugging enabled by kernel config
[ 0.267041] Switched to clocksource arm_global_timer
[ 0.286961] NET: Registered protocol family 2
[ 0.287699] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287756] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287841] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287885] TCP: reno registered
[ 0.287901] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287932] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288163] NET: Registered protocol family 1
[ 0.288500] RPC: Registered named UNIX socket transport module.
[ 0.288512] RPC: Registered udp transport module.
[ 0.288520] RPC: Registered tcp transport module.
[ 0.288529] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288541] PCI: CLS 0 bytes, default 64
[ 0.288972] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290958] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293004] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293205] msgmni has been set to 967
[ 0.293971] io scheduler noop registered
[ 0.293983] io scheduler deadline registered
[ 0.294024] io scheduler cfq registered (default)
[ 0.301864] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.301884] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.425735] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.993337] console [ttyPS0] enabled
[ 0.997615] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.005228] [drm] Initialized drm 1.1.0 20060810
[ 1.022293] brd: module loaded
[ 1.031692] loop: module loaded
[ 1.041141] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.046893] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.054911] libphy: XEMACPS mii bus: probed
[ 1.059312] ------------- phy_id = 0x3625e62
[ 1.064017] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.072668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.079446] ehci-pci: EHCI PCI platform driver
[ 1.086656] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.093493] usbcore: registered new interface driver usb-storage
[ 1.100368] mousedev: PS/2 mouse device common for all mice
[ 1.106452] i2c /dev entries driver
[ 1.113360] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.118875] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.124747] Xilinx Zynq CpuIdle Driver started
[ 1.129620] sdhci: Secure Digital Host Controller Interface driver
[ 1.135715] sdhci: Copyright(c) Pierre Ossman
[ 1.140141] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.145862] mmc0: no vqmmc regulator found
[ 1.149901] mmc0: no vmmc regulator found
[ 1.187064] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.195756] usbcore: registered new interface driver usbhid
[ 1.201261] usbhid: USB HID core driver
[ 1.205975] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.212279] nand: Micron MT29F2G08ABAEAWP
[ 1.216243] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.222178] Bad block table found at page 131008, version 0x01
[ 1.228400] Bad block table found at page 130944, version 0x01
[ 1.234451] 3 ofpart partitions found on MTD device pl353-nand
[ 1.240232] Creating 3 MTD partitions on "pl353-nand":
[ 1.245325] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.253352] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.260665] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.269363] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[ 1.275884] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.281212] TCP: cubic registered
[ 1.284442] NET: Registered protocol family 17
[ 1.289173] Registering SWP/SWPB emulation handler
[ 1.295079] regulator-dummy: disabling
[ 1.299447] UBI: attaching mtd1 to ubi0
[ 1.826045] UBI: scanning is finished
[ 1.837686] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.844735] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.851531] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.858207] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.865045] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.871055] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.878166] UBI: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 408383306
[ 1.887109] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.896307] UBI: background thread "ubi_bgt0d" started, PID 1085
[ 1.896312] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.900307] ALSA device list:
[ 1.900311] No soundcards found.
[ 1.916582] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[ 1.945514] UBIFS: recovery needed
[ 2.793441] UBIFS: recovery completed
[ 2.797151] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.803070] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.812205] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.822089] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.827129] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3AB50DA4-F7D1-4711-9EEE-D3D8DA845970, small LPT model
[ 2.838192] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.844900] devtmpfs: mounted
[ 2.848072] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[ 3.697462] random: dd urandom read with 0 bits of entropy available
[ 4.117059]
[ 4.117059] bcm54xx_config_init
[ 5.187069]
[ 5.187069] bcm54xx_config_init
[ 8.187929] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 8.194016] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 22.589927] In axi fpga driver!
[ 22.592999] request_mem_region OK!
[ 22.596389] AXI fpga dev virtual address is 0xdf9fc000
[ 22.601524] *base_vir_addr = 0xc51e
[ 22.616990] In fpga mem driver!
[ 22.620054] request_mem_region OK!
[ 22.623619] fpga mem virtual address is 0xe2000000
[ 23.416409]
[ 23.416409] bcm54xx_config_init
[ 24.506313]
[ 24.506313] bcm54xx_config_init
[ 27.506836] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 27.512852] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 403.694630] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f67000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d60000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 810474026880881c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x00000060
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:9183: get PIC voltage=108 on chain[5], value=880
main.c:9183: get PIC voltage=108 on chain[6], value=880
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 2
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1832 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:56:49 CST 2019 type: Antminer S9j
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 810474026880881c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5400
driver-btm-c5.c:13148:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0a 0x4f 0x00 0x4f 0x03 0x4f 0x01 0x4f 0x05 0x4f 0x08 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J6] has backup chain_voltage=880
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0a 0x4f 0x00 0x4f 0x03 0x4f 0x01 0x4f 0x05 0x4f 0x08 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J7] has backup chain_voltage=880
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 2
btm_adjust_hash.c:922:adjust_vol: Chain[J6] original vol value=880 adjusted vol value:880
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J6] original chain_voltage_value=880 adjusted chain_voltage_value:880, value=880
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[00] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[01] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[02] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[03] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[04] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[05] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[06] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[07] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[08] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[09] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[10] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[11] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[12] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[13] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[14] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[15] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[16] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[17] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[18] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[19] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[20] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[21] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[22] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[23] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[24] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[25] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[26] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[27] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[28] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[29] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[30] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[31] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[32] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[33] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[34] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[35] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[36] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[37] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[38] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[39] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[40] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[41] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[42] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[43] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[44] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[45] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[46] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[47] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[48] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[49] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[50] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[51] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[52] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[53] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[54] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[55] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[56] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[57] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[58] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[59] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[60] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[61] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[62] original freq=681 adjusted freq:731
btm_adjust_hash.c:922:adjust_vol: Chain[J7] original vol value=880 adjusted vol value:880
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J7] original chain_voltage_value=880 adjusted chain_voltage_value:880, value=880
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[00] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[01] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[02] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[03] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[04] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[05] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[06] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[07] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[08] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[09] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[10] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[11] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[12] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[13] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[14] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[15] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[16] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[17] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[18] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[19] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[20] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[21] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[22] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[23] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[24] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[25] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[26] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[27] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[28] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[29] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[30] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[31] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[32] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[33] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[34] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[35] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[36] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[37] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[38] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[39] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[40] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[41] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[42] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[43] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[44] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[45] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[46] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[47] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[48] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[49] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[50] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[51] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[52] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[53] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[54] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[55] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[56] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[57] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[58] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[59] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[60] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[61] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[62] original freq=681 adjusted freq:731
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J7] has 63 asic
driver-btm-c5.c:4543:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4543:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:3768:get_total_rate_from_eeprom: totalrate = 10408
driver-btm-c5.c:4583:set_frequency: miner total rate=10408GH/s ideal_total_hash_rate = 10000GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4610:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:5 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:4821:set_frequency: Chain:5 max freq=731
driver-btm-c5.c:4822:set_frequency: Chain:5 min freq=731
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4610:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:6 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:4821:set_frequency: Chain:6 max freq=731
driver-btm-c5.c:4822:set_frequency: Chain:6 min freq=731
driver-btm-c5.c:4831:set_frequency: Miner fix freq ...
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4867:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:5 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:5122:set_frequency: Chain:5 max freq=731
driver-btm-c5.c:5123:set_frequency: Chain:5 min freq=731
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4867:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:6 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:5122:set_frequency: Chain:6 max freq=731
driver-btm-c5.c:5123:set_frequency: Chain:6 min freq=731
driver-btm-c5.c:5131:set_frequency: max freq = 731
driver-btm-c5.c:4149:ProcessFixFreq: totalRate = 10000, fixed_totalRate = 10000
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:15 remote:16 offset:28
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:15 remote:17 offset:27
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 880
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=116 total_tv_end_sys=117
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled...
util.c:3207:initiate_stratum: mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 3, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500"]}
driver-btm-c5.c:8738:read_temp_func: bring_up_pcb_temp = 35
driver-btm-c5.c:9897:if_avg_hash_ok: avg hash rate = 10277.250802, ideal hash rate = 10000
driver-btm-c5.c:10415:check_system_work: hash rate is ok now
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:10521:check_system_work: voltage_check_done
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10404, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10423, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10436, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
util.c:3207:initiate_stratum: mining.subscribe:{"id": 258, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500", "00"]}
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10438, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10431, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10438, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10427, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=80.0940 Asic[02]=82.4260 Asic[03]=79.7250 Asic[04]=80.5640 Asic[05]=84.8750 Asic[06]=79.0710 Asic[07]=85.1610 Asic[08]=81.6370
Asic[09]=85.4120 Asic[10]=83.6340 Asic[11]=81.9060 Asic[12]=79.1210 Asic[13]=85.4120 Asic[14]=81.4700 Asic[15]=80.8820 Asic[16]=80.7820
Asic[17]=83.8690 Asic[18]=83.2650 Asic[19]=84.5230 Asic[20]=84.4900 Asic[21]=84.6410 Asic[22]=85.7810 Asic[23]=86.1170 Asic[24]=86.1340
Asic[25]=78.0140 Asic[26]=83.3820 Asic[27]=81.9560 Asic[28]=82.5770 Asic[29]=90.0430 Asic[30]=78.8190 Asic[31]=87.8790 Asic[32]=87.1740
Asic[33]=79.2050 Asic[34]=78.5170 Asic[35]=84.0370 Asic[36]=84.9930 Asic[37]=83.0630 Asic[38]=83.1140 Asic[39]=83.0130 Asic[40]=85.0770
Asic[41]=81.8560 Asic[42]=85.0940 Asic[43]=81.7380 Asic[44]=87.0060 Asic[45]=81.8560 Asic[46]=82.1070 Asic[47]=80.8660 Asic[48]=86.1510
Asic[49]=84.5230 Asic[50]=81.0170 Asic[51]=83.1310 Asic[52]=84.6240 Asic[53]=77.0400 Asic[54]=77.6110 Asic[55]=82.1740 Asic[56]=86.0500
Asic[57]=78.1980 Asic[58]=80.0270 Asic[59]=84.7750 Asic[60]=79.8090 Asic[61]=82.4430 Asic[62]=78.5170 Asic[63]=81.6880
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=82.3420 Asic[02]=84.9760 Asic[03]=82.9290 Asic[04]=92.0060 Asic[05]=76.7890 Asic[06]=84.0870 Asic[07]=82.8290 Asic[08]=84.6410
Asic[09]=83.7350 Asic[10]=90.5130 Asic[11]=78.6850 Asic[12]=78.6340 Asic[13]=82.4600 Asic[14]=87.4930 Asic[15]=82.4930 Asic[16]=80.8820
Asic[17]=82.6440 Asic[18]=83.7350 Asic[19]=85.0100 Asic[20]=85.3280 Asic[21]=79.8090 Asic[22]=83.2980 Asic[23]=76.4360 Asic[24]=94.0690
Asic[25]=76.9900 Asic[26]=83.6840 Asic[27]=83.6670 Asic[28]=78.7350 Asic[29]=83.3150 Asic[30]=75.8490 Asic[31]=78.6180 Asic[32]=83.6170
Asic[33]=81.7720 Asic[34]=84.4560 Asic[35]=90.5800 Asic[36]=89.0190 Asic[37]=81.7050 Asic[38]=83.3150 Asic[39]=90.3280 Asic[40]=82.3590
Asic[41]=82.1240 Asic[42]=79.7750 Asic[43]=85.3960 Asic[44]=78.4830 Asic[45]=77.5100 Asic[46]=79.7750 Asic[47]=80.4460 Asic[48]=79.4900
Asic[49]=85.9660 Asic[50]=78.4830 Asic[51]=82.8120 Asic[52]=85.5300 Asic[53]=84.2210 Asic[54]=82.0900 Asic[55]=79.4900 Asic[56]=75.0100
Asic[57]=77.3260 Asic[58]=89.7740 Asic[59]=79.5240 Asic[60]=79.8420 Asic[61]=84.7080 Asic[62]=79.1540 Asic[63]=84.2880
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=61
Chain[5] Chip[62] junction temperature=67
Special fix Chain[5] Chip[62] middle Temp = 76
Done read temp on Chain[5]
Chain[6] Chip[62] junction temperature=72
Special fix Chain[6] Chip[62] middle Temp = 77
Done read temp on Chain[6]
Max pcb temp : 62
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0 If there any change to reset the hashboard somehow? Maybe it has to do with the pulse of the asic chips in line? I dont know if there is such thing. I Also test this hashboard with my tester fixture and it says 0 asic. Voltages are fine and resistances, capacitors and mofsets checked and is okay. |
|
|
|
|
philipma1957
Legendary
Online
Activity: 4102
Merit: 7764
'The right to privacy matters'
|
|
January 01, 2022, 02:30:41 PM |
|
The resolution of the image you uploaded is very bad, is your gear really showing 69 asic for this hash board? Can you flash a different firmware?
Yes that's really strange, S9 hashboards have 63 asics and sometimes it shown 69-72-80 asic. I installed the latest firmware from bitmain website. Also yes the 2 hashboards working perfect if i unplug the bad one i am talking about. At first i thought it would be the psu and i replace it then i replace the IO cables as well still doing the same. Here is the kernel log from the 2 working hashboards and the image that working fine since 23 days. https://imgur.com/a/L5OZmsH[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06e8cf4 (7044 kB)
[ 0.000000] .init : 0xc06e9000 - 0xc071d480 ( 210 kB)
[ 0.000000] .data : 0xc071e000 - 0xc0767058 ( 293 kB)
[ 0.000000] .bss : 0xc0767064 - 0xc07a7d64 ( 260 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000289] ps7-ttc #0 at df804000, irq=43
[ 0.000588] Console: colour dummy device 80x30
[ 0.000617] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040194] pid_max: default: 32768 minimum: 301
[ 0.040402] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040421] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042600] CPU: Testing write buffer coherency: ok
[ 0.042913] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042968] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[ 0.043188] L310 cache controller enabled
[ 0.043207] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120985] CPU1: Booted secondary processor
[ 0.210215] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210346] Brought up 2 CPUs
[ 0.210365] SMP: Total of 2 processors activated.
[ 0.210373] CPU: All CPU(s) started in SVC mode.
[ 0.211029] devtmpfs: initialized
[ 0.213477] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214668] regulator-dummy: no parameters
[ 0.221580] NET: Registered protocol family 16
[ 0.223787] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226062] cpuidle: using governor ladder
[ 0.226076] cpuidle: using governor menu
[ 0.233452] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.234972] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.234986] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235093] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257282] bio: create slab <bio-0> at 0
[ 0.258650] vgaarb: loaded
[ 0.259338] SCSI subsystem initialized
[ 0.260243] usbcore: registered new interface driver usbfs
[ 0.260588] usbcore: registered new interface driver hub
[ 0.260826] usbcore: registered new device driver usb
[ 0.262283] media: Linux media interface: v0.10
[ 0.262443] Linux video capture interface: v2.00
[ 0.262695] pps_core: LinuxPPS API ver. 1 registered
[ 0.262706] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262831] PTP clock support registered
[ 0.263182] EDAC MC: Ver: 3.0.0
[ 0.264233] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266962] DMA-API: preallocated 4096 debug entries
[ 0.266976] DMA-API: debugging enabled by kernel config
[ 0.267041] Switched to clocksource arm_global_timer
[ 0.286961] NET: Registered protocol family 2
[ 0.287699] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287756] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287841] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287885] TCP: reno registered
[ 0.287901] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287932] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288163] NET: Registered protocol family 1
[ 0.288500] RPC: Registered named UNIX socket transport module.
[ 0.288512] RPC: Registered udp transport module.
[ 0.288520] RPC: Registered tcp transport module.
[ 0.288529] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288541] PCI: CLS 0 bytes, default 64
[ 0.288972] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290958] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293004] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293205] msgmni has been set to 967
[ 0.293971] io scheduler noop registered
[ 0.293983] io scheduler deadline registered
[ 0.294024] io scheduler cfq registered (default)
[ 0.301864] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.301884] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.425735] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.993337] console [ttyPS0] enabled
[ 0.997615] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.005228] [drm] Initialized drm 1.1.0 20060810
[ 1.022293] brd: module loaded
[ 1.031692] loop: module loaded
[ 1.041141] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.046893] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.054911] libphy: XEMACPS mii bus: probed
[ 1.059312] ------------- phy_id = 0x3625e62
[ 1.064017] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.072668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.079446] ehci-pci: EHCI PCI platform driver
[ 1.086656] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.093493] usbcore: registered new interface driver usb-storage
[ 1.100368] mousedev: PS/2 mouse device common for all mice
[ 1.106452] i2c /dev entries driver
[ 1.113360] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.118875] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.124747] Xilinx Zynq CpuIdle Driver started
[ 1.129620] sdhci: Secure Digital Host Controller Interface driver
[ 1.135715] sdhci: Copyright(c) Pierre Ossman
[ 1.140141] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.145862] mmc0: no vqmmc regulator found
[ 1.149901] mmc0: no vmmc regulator found
[ 1.187064] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.195756] usbcore: registered new interface driver usbhid
[ 1.201261] usbhid: USB HID core driver
[ 1.205975] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.212279] nand: Micron MT29F2G08ABAEAWP
[ 1.216243] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.222178] Bad block table found at page 131008, version 0x01
[ 1.228400] Bad block table found at page 130944, version 0x01
[ 1.234451] 3 ofpart partitions found on MTD device pl353-nand
[ 1.240232] Creating 3 MTD partitions on "pl353-nand":
[ 1.245325] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.253352] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.260665] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.269363] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[ 1.275884] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.281212] TCP: cubic registered
[ 1.284442] NET: Registered protocol family 17
[ 1.289173] Registering SWP/SWPB emulation handler
[ 1.295079] regulator-dummy: disabling
[ 1.299447] UBI: attaching mtd1 to ubi0
[ 1.826045] UBI: scanning is finished
[ 1.837686] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.844735] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.851531] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.858207] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.865045] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.871055] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.878166] UBI: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 408383306
[ 1.887109] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.896307] UBI: background thread "ubi_bgt0d" started, PID 1085
[ 1.896312] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.900307] ALSA device list:
[ 1.900311] No soundcards found.
[ 1.916582] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[ 1.945514] UBIFS: recovery needed
[ 2.793441] UBIFS: recovery completed
[ 2.797151] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.803070] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.812205] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.822089] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.827129] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3AB50DA4-F7D1-4711-9EEE-D3D8DA845970, small LPT model
[ 2.838192] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.844900] devtmpfs: mounted
[ 2.848072] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[ 3.697462] random: dd urandom read with 0 bits of entropy available
[ 4.117059]
[ 4.117059] bcm54xx_config_init
[ 5.187069]
[ 5.187069] bcm54xx_config_init
[ 8.187929] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 8.194016] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 22.589927] In axi fpga driver!
[ 22.592999] request_mem_region OK!
[ 22.596389] AXI fpga dev virtual address is 0xdf9fc000
[ 22.601524] *base_vir_addr = 0xc51e
[ 22.616990] In fpga mem driver!
[ 22.620054] request_mem_region OK!
[ 22.623619] fpga mem virtual address is 0xe2000000
[ 23.416409]
[ 23.416409] bcm54xx_config_init
[ 24.506313]
[ 24.506313] bcm54xx_config_init
[ 27.506836] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 27.512852] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 403.694630] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f67000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d60000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 810474026880881c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x00000060
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:9183: get PIC voltage=108 on chain[5], value=880
main.c:9183: get PIC voltage=108 on chain[6], value=880
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 2
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1832 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:56:49 CST 2019 type: Antminer S9j
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 810474026880881c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5400
driver-btm-c5.c:13148:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0a 0x4f 0x00 0x4f 0x03 0x4f 0x01 0x4f 0x05 0x4f 0x08 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J6] has backup chain_voltage=880
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0a 0x4f 0x00 0x4f 0x03 0x4f 0x01 0x4f 0x05 0x4f 0x08 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J7] has backup chain_voltage=880
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 2
btm_adjust_hash.c:922:adjust_vol: Chain[J6] original vol value=880 adjusted vol value:880
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J6] original chain_voltage_value=880 adjusted chain_voltage_value:880, value=880
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[00] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[01] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[02] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[03] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[04] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[05] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[06] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[07] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[08] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[09] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[10] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[11] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[12] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[13] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[14] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[15] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[16] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[17] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[18] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[19] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[20] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[21] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[22] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[23] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[24] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[25] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[26] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[27] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[28] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[29] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[30] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[31] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[32] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[33] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[34] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[35] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[36] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[37] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[38] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[39] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[40] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[41] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[42] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[43] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[44] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[45] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[46] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[47] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[48] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[49] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[50] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[51] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[52] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[53] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[54] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[55] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[56] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[57] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[58] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[59] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[60] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[61] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[62] original freq=681 adjusted freq:731
btm_adjust_hash.c:922:adjust_vol: Chain[J7] original vol value=880 adjusted vol value:880
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J7] original chain_voltage_value=880 adjusted chain_voltage_value:880, value=880
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[00] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[01] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[02] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[03] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[04] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[05] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[06] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[07] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[08] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[09] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[10] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[11] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[12] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[13] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[14] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[15] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[16] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[17] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[18] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[19] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[20] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[21] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[22] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[23] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[24] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[25] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[26] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[27] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[28] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[29] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[30] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[31] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[32] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[33] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[34] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[35] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[36] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[37] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[38] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[39] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[40] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[41] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[42] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[43] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[44] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[45] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[46] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[47] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[48] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[49] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[50] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[51] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[52] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[53] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[54] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[55] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[56] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[57] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[58] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[59] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[60] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[61] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[62] original freq=681 adjusted freq:731
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J7] has 63 asic
driver-btm-c5.c:4543:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4543:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:3768:get_total_rate_from_eeprom: totalrate = 10408
driver-btm-c5.c:4583:set_frequency: miner total rate=10408GH/s ideal_total_hash_rate = 10000GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4610:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:5 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:4821:set_frequency: Chain:5 max freq=731
driver-btm-c5.c:4822:set_frequency: Chain:5 min freq=731
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4610:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:6 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:4821:set_frequency: Chain:6 max freq=731
driver-btm-c5.c:4822:set_frequency: Chain:6 min freq=731
driver-btm-c5.c:4831:set_frequency: Miner fix freq ...
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4867:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:5 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:5122:set_frequency: Chain:5 max freq=731
driver-btm-c5.c:5123:set_frequency: Chain:5 min freq=731
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4867:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:6 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:5122:set_frequency: Chain:6 max freq=731
driver-btm-c5.c:5123:set_frequency: Chain:6 min freq=731
driver-btm-c5.c:5131:set_frequency: max freq = 731
driver-btm-c5.c:4149:ProcessFixFreq: totalRate = 10000, fixed_totalRate = 10000
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:15 remote:16 offset:28
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:15 remote:17 offset:27
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 880
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=116 total_tv_end_sys=117
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled...
util.c:3207:initiate_stratum: mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 3, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500"]}
driver-btm-c5.c:8738:read_temp_func: bring_up_pcb_temp = 35
driver-btm-c5.c:9897:if_avg_hash_ok: avg hash rate = 10277.250802, ideal hash rate = 10000
driver-btm-c5.c:10415:check_system_work: hash rate is ok now
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:10521:check_system_work: voltage_check_done
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10404, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10423, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10436, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
util.c:3207:initiate_stratum: mining.subscribe:{"id": 258, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500", "00"]}
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10438, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10431, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10438, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10427, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=80.0940 Asic[02]=82.4260 Asic[03]=79.7250 Asic[04]=80.5640 Asic[05]=84.8750 Asic[06]=79.0710 Asic[07]=85.1610 Asic[08]=81.6370
Asic[09]=85.4120 Asic[10]=83.6340 Asic[11]=81.9060 Asic[12]=79.1210 Asic[13]=85.4120 Asic[14]=81.4700 Asic[15]=80.8820 Asic[16]=80.7820
Asic[17]=83.8690 Asic[18]=83.2650 Asic[19]=84.5230 Asic[20]=84.4900 Asic[21]=84.6410 Asic[22]=85.7810 Asic[23]=86.1170 Asic[24]=86.1340
Asic[25]=78.0140 Asic[26]=83.3820 Asic[27]=81.9560 Asic[28]=82.5770 Asic[29]=90.0430 Asic[30]=78.8190 Asic[31]=87.8790 Asic[32]=87.1740
Asic[33]=79.2050 Asic[34]=78.5170 Asic[35]=84.0370 Asic[36]=84.9930 Asic[37]=83.0630 Asic[38]=83.1140 Asic[39]=83.0130 Asic[40]=85.0770
Asic[41]=81.8560 Asic[42]=85.0940 Asic[43]=81.7380 Asic[44]=87.0060 Asic[45]=81.8560 Asic[46]=82.1070 Asic[47]=80.8660 Asic[48]=86.1510
Asic[49]=84.5230 Asic[50]=81.0170 Asic[51]=83.1310 Asic[52]=84.6240 Asic[53]=77.0400 Asic[54]=77.6110 Asic[55]=82.1740 Asic[56]=86.0500
Asic[57]=78.1980 Asic[58]=80.0270 Asic[59]=84.7750 Asic[60]=79.8090 Asic[61]=82.4430 Asic[62]=78.5170 Asic[63]=81.6880
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=82.3420 Asic[02]=84.9760 Asic[03]=82.9290 Asic[04]=92.0060 Asic[05]=76.7890 Asic[06]=84.0870 Asic[07]=82.8290 Asic[08]=84.6410
Asic[09]=83.7350 Asic[10]=90.5130 Asic[11]=78.6850 Asic[12]=78.6340 Asic[13]=82.4600 Asic[14]=87.4930 Asic[15]=82.4930 Asic[16]=80.8820
Asic[17]=82.6440 Asic[18]=83.7350 Asic[19]=85.0100 Asic[20]=85.3280 Asic[21]=79.8090 Asic[22]=83.2980 Asic[23]=76.4360 Asic[24]=94.0690
Asic[25]=76.9900 Asic[26]=83.6840 Asic[27]=83.6670 Asic[28]=78.7350 Asic[29]=83.3150 Asic[30]=75.8490 Asic[31]=78.6180 Asic[32]=83.6170
Asic[33]=81.7720 Asic[34]=84.4560 Asic[35]=90.5800 Asic[36]=89.0190 Asic[37]=81.7050 Asic[38]=83.3150 Asic[39]=90.3280 Asic[40]=82.3590
Asic[41]=82.1240 Asic[42]=79.7750 Asic[43]=85.3960 Asic[44]=78.4830 Asic[45]=77.5100 Asic[46]=79.7750 Asic[47]=80.4460 Asic[48]=79.4900
Asic[49]=85.9660 Asic[50]=78.4830 Asic[51]=82.8120 Asic[52]=85.5300 Asic[53]=84.2210 Asic[54]=82.0900 Asic[55]=79.4900 Asic[56]=75.0100
Asic[57]=77.3260 Asic[58]=89.7740 Asic[59]=79.5240 Asic[60]=79.8420 Asic[61]=84.7080 Asic[62]=79.1540 Asic[63]=84.2880
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=61
Chain[5] Chip[62] junction temperature=67
Special fix Chain[5] Chip[62] middle Temp = 76
Done read temp on Chain[5]
Chain[6] Chip[62] junction temperature=72
Special fix Chain[6] Chip[62] middle Temp = 77
Done read temp on Chain[6]
Max pcb temp : 62
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0 If there any change to reset the hashboard somehow? Maybe it has to do with the pulse of the asic chips in line? I dont know if there is such thing. I Also test this hashboard with my tester fixture and it says 0 asic. Voltages are fine and resistances, capacitors and mofsets checked and is okay. so pretend slot 1 is good slot 2 is good slot 3 is bad take the bad board move it to one of the good slots using a known good cable and a known good controller jack. this way if it works the issue is either the cable or the controller jack. lets see that the board is the issue for sure. as the cable or the controller slot could be bad. edit i see you tried the data cable and a good one does not fix the poblem. so just switch the data cable jack just in case the controller has a bad jack. some times the controller goes partially bad a fan jack fails to detect a fan and or a data jack stops working. so when you put a good hash board in your testing fixture does it read 63 asics? if it does i suspect the very first asic chip has failed either the traces attaching the chip or the chip itself. |
|
|
|
PanTheo91 (OP)
Newbie
Offline
Activity: 28
Merit: 4
|
|
January 01, 2022, 03:32:48 PM |
|
The resolution of the image you uploaded is very bad, is your gear really showing 69 asic for this hash board? Can you flash a different firmware?
Yes that's really strange, S9 hashboards have 63 asics and sometimes it shown 69-72-80 asic. I installed the latest firmware from bitmain website. Also yes the 2 hashboards working perfect if i unplug the bad one i am talking about. At first i thought it would be the psu and i replace it then i replace the IO cables as well still doing the same. Here is the kernel log from the 2 working hashboards and the image that working fine since 23 days. https://imgur.com/a/L5OZmsH[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06e8cf4 (7044 kB)
[ 0.000000] .init : 0xc06e9000 - 0xc071d480 ( 210 kB)
[ 0.000000] .data : 0xc071e000 - 0xc0767058 ( 293 kB)
[ 0.000000] .bss : 0xc0767064 - 0xc07a7d64 ( 260 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000289] ps7-ttc #0 at df804000, irq=43
[ 0.000588] Console: colour dummy device 80x30
[ 0.000617] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040194] pid_max: default: 32768 minimum: 301
[ 0.040402] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040421] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042600] CPU: Testing write buffer coherency: ok
[ 0.042913] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042968] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[ 0.043188] L310 cache controller enabled
[ 0.043207] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120985] CPU1: Booted secondary processor
[ 0.210215] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210346] Brought up 2 CPUs
[ 0.210365] SMP: Total of 2 processors activated.
[ 0.210373] CPU: All CPU(s) started in SVC mode.
[ 0.211029] devtmpfs: initialized
[ 0.213477] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214668] regulator-dummy: no parameters
[ 0.221580] NET: Registered protocol family 16
[ 0.223787] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226062] cpuidle: using governor ladder
[ 0.226076] cpuidle: using governor menu
[ 0.233452] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.234972] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.234986] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235093] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257282] bio: create slab <bio-0> at 0
[ 0.258650] vgaarb: loaded
[ 0.259338] SCSI subsystem initialized
[ 0.260243] usbcore: registered new interface driver usbfs
[ 0.260588] usbcore: registered new interface driver hub
[ 0.260826] usbcore: registered new device driver usb
[ 0.262283] media: Linux media interface: v0.10
[ 0.262443] Linux video capture interface: v2.00
[ 0.262695] pps_core: LinuxPPS API ver. 1 registered
[ 0.262706] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262831] PTP clock support registered
[ 0.263182] EDAC MC: Ver: 3.0.0
[ 0.264233] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266962] DMA-API: preallocated 4096 debug entries
[ 0.266976] DMA-API: debugging enabled by kernel config
[ 0.267041] Switched to clocksource arm_global_timer
[ 0.286961] NET: Registered protocol family 2
[ 0.287699] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287756] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287841] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287885] TCP: reno registered
[ 0.287901] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287932] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288163] NET: Registered protocol family 1
[ 0.288500] RPC: Registered named UNIX socket transport module.
[ 0.288512] RPC: Registered udp transport module.
[ 0.288520] RPC: Registered tcp transport module.
[ 0.288529] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288541] PCI: CLS 0 bytes, default 64
[ 0.288972] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290958] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293004] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293205] msgmni has been set to 967
[ 0.293971] io scheduler noop registered
[ 0.293983] io scheduler deadline registered
[ 0.294024] io scheduler cfq registered (default)
[ 0.301864] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.301884] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.425735] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.993337] console [ttyPS0] enabled
[ 0.997615] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.005228] [drm] Initialized drm 1.1.0 20060810
[ 1.022293] brd: module loaded
[ 1.031692] loop: module loaded
[ 1.041141] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.046893] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.054911] libphy: XEMACPS mii bus: probed
[ 1.059312] ------------- phy_id = 0x3625e62
[ 1.064017] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.072668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.079446] ehci-pci: EHCI PCI platform driver
[ 1.086656] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.093493] usbcore: registered new interface driver usb-storage
[ 1.100368] mousedev: PS/2 mouse device common for all mice
[ 1.106452] i2c /dev entries driver
[ 1.113360] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.118875] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.124747] Xilinx Zynq CpuIdle Driver started
[ 1.129620] sdhci: Secure Digital Host Controller Interface driver
[ 1.135715] sdhci: Copyright(c) Pierre Ossman
[ 1.140141] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.145862] mmc0: no vqmmc regulator found
[ 1.149901] mmc0: no vmmc regulator found
[ 1.187064] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.195756] usbcore: registered new interface driver usbhid
[ 1.201261] usbhid: USB HID core driver
[ 1.205975] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.212279] nand: Micron MT29F2G08ABAEAWP
[ 1.216243] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.222178] Bad block table found at page 131008, version 0x01
[ 1.228400] Bad block table found at page 130944, version 0x01
[ 1.234451] 3 ofpart partitions found on MTD device pl353-nand
[ 1.240232] Creating 3 MTD partitions on "pl353-nand":
[ 1.245325] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.253352] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.260665] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.269363] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[ 1.275884] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.281212] TCP: cubic registered
[ 1.284442] NET: Registered protocol family 17
[ 1.289173] Registering SWP/SWPB emulation handler
[ 1.295079] regulator-dummy: disabling
[ 1.299447] UBI: attaching mtd1 to ubi0
[ 1.826045] UBI: scanning is finished
[ 1.837686] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.844735] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.851531] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.858207] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.865045] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.871055] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.878166] UBI: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 408383306
[ 1.887109] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.896307] UBI: background thread "ubi_bgt0d" started, PID 1085
[ 1.896312] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.900307] ALSA device list:
[ 1.900311] No soundcards found.
[ 1.916582] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[ 1.945514] UBIFS: recovery needed
[ 2.793441] UBIFS: recovery completed
[ 2.797151] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.803070] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.812205] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.822089] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.827129] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3AB50DA4-F7D1-4711-9EEE-D3D8DA845970, small LPT model
[ 2.838192] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.844900] devtmpfs: mounted
[ 2.848072] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[ 3.697462] random: dd urandom read with 0 bits of entropy available
[ 4.117059]
[ 4.117059] bcm54xx_config_init
[ 5.187069]
[ 5.187069] bcm54xx_config_init
[ 8.187929] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 8.194016] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 22.589927] In axi fpga driver!
[ 22.592999] request_mem_region OK!
[ 22.596389] AXI fpga dev virtual address is 0xdf9fc000
[ 22.601524] *base_vir_addr = 0xc51e
[ 22.616990] In fpga mem driver!
[ 22.620054] request_mem_region OK!
[ 22.623619] fpga mem virtual address is 0xe2000000
[ 23.416409]
[ 23.416409] bcm54xx_config_init
[ 24.506313]
[ 24.506313] bcm54xx_config_init
[ 27.506836] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 27.512852] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 403.694630] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f67000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d60000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 810474026880881c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x00000060
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:9183: get PIC voltage=108 on chain[5], value=880
main.c:9183: get PIC voltage=108 on chain[6], value=880
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 2
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1832 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:56:49 CST 2019 type: Antminer S9j
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 810474026880881c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5400
driver-btm-c5.c:13148:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0a 0x4f 0x00 0x4f 0x03 0x4f 0x01 0x4f 0x05 0x4f 0x08 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J6] has backup chain_voltage=880
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0a 0x4f 0x00 0x4f 0x03 0x4f 0x01 0x4f 0x05 0x4f 0x08 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J7] has backup chain_voltage=880
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 2
btm_adjust_hash.c:922:adjust_vol: Chain[J6] original vol value=880 adjusted vol value:880
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J6] original chain_voltage_value=880 adjusted chain_voltage_value:880, value=880
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[00] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[01] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[02] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[03] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[04] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[05] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[06] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[07] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[08] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[09] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[10] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[11] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[12] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[13] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[14] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[15] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[16] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[17] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[18] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[19] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[20] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[21] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[22] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[23] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[24] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[25] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[26] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[27] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[28] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[29] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[30] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[31] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[32] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[33] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[34] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[35] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[36] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[37] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[38] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[39] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[40] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[41] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[42] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[43] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[44] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[45] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[46] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[47] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[48] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[49] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[50] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[51] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[52] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[53] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[54] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[55] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[56] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[57] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[58] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[59] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[60] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[61] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[62] original freq=681 adjusted freq:731
btm_adjust_hash.c:922:adjust_vol: Chain[J7] original vol value=880 adjusted vol value:880
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J7] original chain_voltage_value=880 adjusted chain_voltage_value:880, value=880
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[00] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[01] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[02] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[03] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[04] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[05] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[06] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[07] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[08] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[09] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[10] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[11] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[12] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[13] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[14] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[15] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[16] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[17] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[18] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[19] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[20] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[21] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[22] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[23] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[24] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[25] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[26] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[27] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[28] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[29] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[30] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[31] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[32] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[33] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[34] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[35] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[36] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[37] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[38] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[39] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[40] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[41] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[42] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[43] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[44] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[45] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[46] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[47] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[48] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[49] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[50] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[51] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[52] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[53] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[54] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[55] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[56] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[57] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[58] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[59] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[60] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[61] original freq=681 adjusted freq:731
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[62] original freq=681 adjusted freq:731
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J7] has 63 asic
driver-btm-c5.c:4543:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4543:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:3768:get_total_rate_from_eeprom: totalrate = 10408
driver-btm-c5.c:4583:set_frequency: miner total rate=10408GH/s ideal_total_hash_rate = 10000GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4610:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:5 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:4821:set_frequency: Chain:5 max freq=731
driver-btm-c5.c:4822:set_frequency: Chain:5 min freq=731
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4610:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:6 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:4821:set_frequency: Chain:6 max freq=731
driver-btm-c5.c:4822:set_frequency: Chain:6 min freq=731
driver-btm-c5.c:4831:set_frequency: Miner fix freq ...
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4867:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:5 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:5122:set_frequency: Chain:5 max freq=731
driver-btm-c5.c:5123:set_frequency: Chain:5 min freq=731
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4867:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:6 base freq=100
Asic[ 0]:731 Asic[ 1]:731 Asic[ 2]:731 Asic[ 3]:731 Asic[ 4]:731 Asic[ 5]:731 Asic[ 6]:731 Asic[ 7]:731
Asic[ 8]:731 Asic[ 9]:731 Asic[10]:731 Asic[11]:731 Asic[12]:731 Asic[13]:731 Asic[14]:731 Asic[15]:731
Asic[16]:731 Asic[17]:731 Asic[18]:731 Asic[19]:731 Asic[20]:731 Asic[21]:731 Asic[22]:731 Asic[23]:731
Asic[24]:731 Asic[25]:731 Asic[26]:731 Asic[27]:731 Asic[28]:731 Asic[29]:731 Asic[30]:731 Asic[31]:731
Asic[32]:731 Asic[33]:731 Asic[34]:731 Asic[35]:731 Asic[36]:731 Asic[37]:731 Asic[38]:731 Asic[39]:731
Asic[40]:731 Asic[41]:731 Asic[42]:731 Asic[43]:731 Asic[44]:731 Asic[45]:731 Asic[46]:731 Asic[47]:731
Asic[48]:731 Asic[49]:731 Asic[50]:731 Asic[51]:731 Asic[52]:731 Asic[53]:731 Asic[54]:731 Asic[55]:731
Asic[56]:731 Asic[57]:731 Asic[58]:731 Asic[59]:731 Asic[60]:731 Asic[61]:731 Asic[62]:731
driver-btm-c5.c:5122:set_frequency: Chain:6 max freq=731
driver-btm-c5.c:5123:set_frequency: Chain:6 min freq=731
driver-btm-c5.c:5131:set_frequency: max freq = 731
driver-btm-c5.c:4149:ProcessFixFreq: totalRate = 10000, fixed_totalRate = 10000
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:15 remote:16 offset:28
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:15 remote:17 offset:27
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 880
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=116 total_tv_end_sys=117
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled...
util.c:3207:initiate_stratum: mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 3, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500"]}
driver-btm-c5.c:8738:read_temp_func: bring_up_pcb_temp = 35
driver-btm-c5.c:9897:if_avg_hash_ok: avg hash rate = 10277.250802, ideal hash rate = 10000
driver-btm-c5.c:10415:check_system_work: hash rate is ok now
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:10521:check_system_work: voltage_check_done
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10404, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10423, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10436, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
util.c:3207:initiate_stratum: mining.subscribe:{"id": 258, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/9500", "00"]}
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10438, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10431, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10438, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 10427, ideal_total_hash_rate = 10000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=80.0940 Asic[02]=82.4260 Asic[03]=79.7250 Asic[04]=80.5640 Asic[05]=84.8750 Asic[06]=79.0710 Asic[07]=85.1610 Asic[08]=81.6370
Asic[09]=85.4120 Asic[10]=83.6340 Asic[11]=81.9060 Asic[12]=79.1210 Asic[13]=85.4120 Asic[14]=81.4700 Asic[15]=80.8820 Asic[16]=80.7820
Asic[17]=83.8690 Asic[18]=83.2650 Asic[19]=84.5230 Asic[20]=84.4900 Asic[21]=84.6410 Asic[22]=85.7810 Asic[23]=86.1170 Asic[24]=86.1340
Asic[25]=78.0140 Asic[26]=83.3820 Asic[27]=81.9560 Asic[28]=82.5770 Asic[29]=90.0430 Asic[30]=78.8190 Asic[31]=87.8790 Asic[32]=87.1740
Asic[33]=79.2050 Asic[34]=78.5170 Asic[35]=84.0370 Asic[36]=84.9930 Asic[37]=83.0630 Asic[38]=83.1140 Asic[39]=83.0130 Asic[40]=85.0770
Asic[41]=81.8560 Asic[42]=85.0940 Asic[43]=81.7380 Asic[44]=87.0060 Asic[45]=81.8560 Asic[46]=82.1070 Asic[47]=80.8660 Asic[48]=86.1510
Asic[49]=84.5230 Asic[50]=81.0170 Asic[51]=83.1310 Asic[52]=84.6240 Asic[53]=77.0400 Asic[54]=77.6110 Asic[55]=82.1740 Asic[56]=86.0500
Asic[57]=78.1980 Asic[58]=80.0270 Asic[59]=84.7750 Asic[60]=79.8090 Asic[61]=82.4430 Asic[62]=78.5170 Asic[63]=81.6880
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=82.3420 Asic[02]=84.9760 Asic[03]=82.9290 Asic[04]=92.0060 Asic[05]=76.7890 Asic[06]=84.0870 Asic[07]=82.8290 Asic[08]=84.6410
Asic[09]=83.7350 Asic[10]=90.5130 Asic[11]=78.6850 Asic[12]=78.6340 Asic[13]=82.4600 Asic[14]=87.4930 Asic[15]=82.4930 Asic[16]=80.8820
Asic[17]=82.6440 Asic[18]=83.7350 Asic[19]=85.0100 Asic[20]=85.3280 Asic[21]=79.8090 Asic[22]=83.2980 Asic[23]=76.4360 Asic[24]=94.0690
Asic[25]=76.9900 Asic[26]=83.6840 Asic[27]=83.6670 Asic[28]=78.7350 Asic[29]=83.3150 Asic[30]=75.8490 Asic[31]=78.6180 Asic[32]=83.6170
Asic[33]=81.7720 Asic[34]=84.4560 Asic[35]=90.5800 Asic[36]=89.0190 Asic[37]=81.7050 Asic[38]=83.3150 Asic[39]=90.3280 Asic[40]=82.3590
Asic[41]=82.1240 Asic[42]=79.7750 Asic[43]=85.3960 Asic[44]=78.4830 Asic[45]=77.5100 Asic[46]=79.7750 Asic[47]=80.4460 Asic[48]=79.4900
Asic[49]=85.9660 Asic[50]=78.4830 Asic[51]=82.8120 Asic[52]=85.5300 Asic[53]=84.2210 Asic[54]=82.0900 Asic[55]=79.4900 Asic[56]=75.0100
Asic[57]=77.3260 Asic[58]=89.7740 Asic[59]=79.5240 Asic[60]=79.8420 Asic[61]=84.7080 Asic[62]=79.1540 Asic[63]=84.2880
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=61
Chain[5] Chip[62] junction temperature=67
Special fix Chain[5] Chip[62] middle Temp = 76
Done read temp on Chain[5]
Chain[6] Chip[62] junction temperature=72
Special fix Chain[6] Chip[62] middle Temp = 77
Done read temp on Chain[6]
Max pcb temp : 62
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0 If there any change to reset the hashboard somehow? Maybe it has to do with the pulse of the asic chips in line? I dont know if there is such thing. I Also test this hashboard with my tester fixture and it says 0 asic. Voltages are fine and resistances, capacitors and mofsets checked and is okay. so pretend slot 1 is good slot 2 is good slot 3 is bad take the bad board move it to one of the good slots using a known good cable and a known good controller jack. this way if it works the issue is either the cable or the controller jack. lets see that the board is the issue for sure. as the cable or the controller slot could be bad. edit i see you tried the data cable and a good one does not fix the poblem. so just switch the data cable jack just in case the controller has a bad jack. some times the controller goes partially bad a fan jack fails to detect a fan and or a data jack stops working. so when you put a good hash board in your testing fixture does it read 63 asics? if it does i suspect the very first asic chip has failed either the traces attaching the chip or the chip itself. Yes i tried different things and make the conclusion that something is wrong with the hashboard. This hashboard was in place number 3 so i switch the data cable and slot and did the same so i removed it and leave the 2 working hashboards because it caused reboots to the whole miner. I tried different control board as well. The text fixture on a working hashboard says okay on the lcd panel. I don't know what else to check on this hashboard. Maybe its something easy to find because this happened suddnely. Maybe its one of the LDO? I am not sure how to check them |
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2212
Merit: 6359
be constructive or S.T.F.U
|
|
January 01, 2022, 10:39:23 PM |
|
The first thing I would do is try custom firmware like Vnish (Awesomeminer or Asic.to) just to rule out any firmware related issues, and then you could try to extract the hex from a working hash board and write it to the bad hash board using something like Pickit3, if you don't know how to do that let me know and I'll try to find the thread made by one of the members here.
|
|
|
|
BitMaxz
Legendary
Offline
Activity: 3234
Merit: 2942
Block halving is coming.
|
|
January 01, 2022, 11:12:16 PM |
|
Yes i tried different things and make the conclusion that something is wrong with the hashboard. This hashboard was in place number 3 so i switch the data cable and slot and did the same so i removed it and leave the 2 working hashboards because it caused reboots to the whole miner. I tried different control board as well. The text fixture on a working hashboard says okay on the lcd panel. I don't know what else to check on this hashboard. Maybe its something easy to find because this happened suddnely. Maybe its one of the LDO? I am not sure how to check them
Without tools, you can't check if it's a hardware issue you need a multimeter to check some of the resistance of each test point(TP). If you have a multimeter then try to check all lines according to the diagram below - https://www.zeusbtc.com/articles/information/171-antminer-s9-and-s9i-manual-downloadI'm sure you will notice some different resistance between the bad and good hashboard. |
|
|
|
PanTheo91 (OP)
Newbie
Offline
Activity: 28
Merit: 4
|
|
January 02, 2022, 02:14:27 AM |
|
The first thing I would do is try custom firmware like Vnish (Awesomeminer or Asic.to) just to rule out any firmware related issues, and then you could try to extract the hex from a working hash board and write it to the bad hash board using something like Pickit3, if you don't know how to do that let me know and I'll try to find the thread made by one of the members here.
Sounds great i will test this as well. since resistanses and voltages are fine i have to try thing. I would appreciate if you can find the thread for me. Thank you |
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2212
Merit: 6359
be constructive or S.T.F.U
|
|
January 03, 2022, 10:29:05 AM |
|
Op here is the link to the topic https://bitcointalk.org/index.php?topic=5032987.0It was made for T9 miner but the same logic applies to other miners, just make sure you follow the steps. |
|
|
|
PanTheo91 (OP)
Newbie
Offline
Activity: 28
Merit: 4
|
|
January 03, 2022, 01:39:32 PM |
|
Thank you i really appreciate your help. Also my Test Fixture goes crazy on this hashboard on xshell program, thats why i assume its not a chip problem. https://imgur.com/kyhttIF |
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2212
Merit: 6359
be constructive or S.T.F.U
|
|
January 04, 2022, 12:19:16 AM |
|
Thank you i really appreciate your help. Also my Test Fixture goes crazy on this hashboard on xshell program, thats why i assume its not a chip problem. https://imgur.com/kyhttIFThere are many things that can go wrong, of course, the majority of them are probably things that aren't easy to fix, but let's just hope this solves it or at least a part of it, please report your results back. |
|
|
|
|
