Eco project turning plastic waste into Energy & capturing CO2

[morda]

The project will be converting up to 30ton/day of plastic waste into electricity

How is best to do this?

Start out by converting 1kg/day.

Prove your concept first, and investors will contact you.

This should how be done first because proving out your concept first and let the community publicly see on how the project works then the rest would follow.
Then thats the time on how op will accept the funding either on creating another shitcoin  or accepting thru BTC deposits. Sometimes making out concepts is really very
easy but when the time comes on how to apply it would be the hardest part.

I already managed to convert over 1kg plastic into oil and refine it into deisel/petrol

now I'm building a much more refined continuous machine which I will video and demonstrate to the world

however I'm already working with engineers on feasibility studies to build a 30ton/day machine based on existing technology

a huge part of this project would be to implement Co2 capture tech which actually is available on the market

end goal is to turn waste into energy and Zero waste the faster I succeed the less nuclear stations and coal stations will be required

[1715321351]

1715321351

[1715321351]

1715321351

[1715321351]

1715321351

[morda]

Updated this project
Reviving post

[stompix]

Updated 07/01/2022
Achievements to Date
Working prototype of Unit X

Where can we see the working unit?

A crowdfunding app on Btcpay server has been setup to raise funds to continue this project, naturally you can donate via lightening payment.
https://btcpay.blend-energy.com/

Just 10 million, not like you're asking for much...right?



So this is your CO2 capture system, are you sure about it?
You could have sold it as a pyrolysis reactor column, since you're at that point, and judging by the size a rather small one something below 10kg,  but nothing else.

Bottom, what's so revolutionary in your project compared to a normal pyrolysis module that is available to buy right now almost everywhere on this planet, and why do you need $10m??

[morda]

Ill be posting a video of the CO2 capture system next week

and shortly after a video of the Unit X

yes, im posting this prematurely i know however time is limited on my side i would like to start getting feedback while i make several finishing touches
but unfortunately there is no such system available on the market, what is offered are large process machines that cant even handle PVC or PET properly

$10m may sound a lot but unfortunately for this kind of project, until you acquire the right premises, apply for all EPA permissions and hire all the right talent you've burn through half your budget

So this is your CO2 capture system, are you sure about it?
You could have sold it as a pyrolysis reactor column, since you're at that point, and judging by the size a rather small one something below 10kg,  but nothing else.

unfortunately if you use this as a reactor all the paint would burn off and it would have been painted for nothing, this column holds the customised sorbent used to capture co2, this was before it was integrated into the full machine

[stompix]

yes, im posting this prematurely i know however time is limited on my side i would like to start getting feedback while i make several finishing touches

If in 4 years you haven't had time to take not a video but even an actual picture of that thing, you know how this sounds coming from someone asking for 10 million?

but unfortunately there is no such system available on the market, what is offered are large process machines that cant even handle PVC or PET properly

There are small machines from 10-50 kg to simple truck loading containers that can deal with anything, from coal to tires, common we had these for decades from gasification to depolymerization purpose.
Even HDPE is not different with anything from lower density polymers, the same range of temperature is needed.

unfortunately if you use this as a reactor all the paint would burn off and it would have been painted for nothing, this column holds the customised sorbent used to capture co2, this was before it was integrated into the full machine

I wonder why poeple paint stuff that does 700C but this one would burn at around 550C inside the reactor.
A machine which...you forgot to take a picture of.

[morda]

yes, im posting this prematurely i know however time is limited on my side i would like to start getting feedback while i make several finishing touches

If in 4 years you haven't had time to take not a video but even an actual picture of that thing, you know how this sounds coming from someone asking for 10 million?

.
i totally agree in addition when one must weld, fit, electrically wire, program, experiment, run accounts, plan, design and even setup this crowdfund you wont be wasting a second when your waiting for a few parts

but unfortunately there is no such system available on the market, what is offered are large process machines that cant even handle PVC or PET properly

There are small machines from 10-50 kg to simple truck loading containers that can deal with anything, from coal to tires, common we had these for decades from gasification to depolymerization purpose.
Even HDPE is not different with anything from lower density polymers, the same range of temperature is needed.

please enlighten me; it would be great to order one and stop what im doing, and would love to see how it handles the chlorine in the PVC and the oxygen in the PET...….

I wonder why poeple paint stuff that does 700C but this one would burn at around 550C inside the reactor.
A machine which...you forgot to take a picture of.

with all your wisdom please write where i mentioned "forgot"?

again if you bothered to read what i wrote, all i mentioned is that this column is part of the CO2 capture system no where did i mention it works the temperatures you mentioned

[morda]

released new video showing our CO2 capture tech

https://www.youtube.com/watch?v=69JKTfSR84A

more to come