TeamRedMiner VERY LOW Mh/s on RX580 8GB

[talminer]

Hi,

I'm new to mining and thought I'd give it a go.
I have a RX580 8GB, so found TeamRed v0.9.1 to be the best miner, so installed this and read I should be getting around 14MH/s, but instead I'm getting 1.571Mh/s and sometimes peaks at 2.3Mh/s

kawpow: 2.188Mh/s, avg 830.6kh/s

My CPU is getting hammered and the GPU spikes from 1% to 60% every now and then.

The batch file command I'm using is (with the correct wallet address in there of course)

teamredminer.exe -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u wallet-address.worker -p x --enable_compute

I've updated to the latest AMD drivers, gone into advanced settings and enable compute over gaming and still getting very low MH/s
Is this to be expected or am I doing something wrong with the batch command file to try and mine raven coins?

Thanks for any input you may have to help me with this.

Regards, Tal.

[Metroid]

Maybe the gpu needs to be cleaned.

[FP91G]

https://rvn.2miners.com/help

teamredminer.exe -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u YOUR_WALLET_ADDRESS.RIG_ID -p x
pause

Remove --enable_compute

https://github.com/todxx/teamredminer/releases
Download the miner again, run it with the recommended settings.
What operating system are you using? I hope not windows 7, 8 or 11?
You need windows 10 and any video card test.

[Refrumatrix]

Just install hiveOS instead you will get 30MH easier on your rx580 graphic cards, I prefer hiveOS due to a this driver related issues the hiveOS use the mist stable driver for each cards either Nvidia or AMD out of the box

[batsonxl]

Are you using windows 7 ?
Dont forget swith in wattman to compute mode and fast timings to mt1 or mt2
Latest trm doing with rx470 4g 14mhs on RVN and 60-61 on ERGO. WIN10 x64