I have two rigs so far Rig #1 consists of 2x 3070 + 3x 3060 Ti Mostly mining ETH using NH
Second Rig #2 having all 4x 3080 Cards (one is FHR)...
Recently I noticed both rigs are rebooting AT THE SAME TIME after displaying an error something like (in NB Miner) Overclock/Power settings failure, couldn't grab a screenshot for that, then a BSOD, the strange thing both rigs fail and reboot the same time !...
First rig got 1200w PSU
Second rig got dual 1000w (FHR + LHR card) + 1200w PSUs (both LHR cards)
All 3 PSUs sockets are connected on one of these:
https://bgr.com/deals/25-kasa-smart-power-strip-controls-3-deviceswith-your-phone-or-alexa/and That is connected on the wall with a second one of these
am in a 1 bed room apartment and not really sure how much power draw from the wall is and whether that BSOD is caused due to power shortage or simply OC misconfiguration or even a bad hardware/riser
I just replaced one riser recently !...
First here is my OC settings are they good enough ?
http://grabilla.com/0c30a-7e5aa017-3ca8-4a5e-909f-50c94d61b5c0.htmland how to identify the reason of this random RIGS BSODs and reboots at the same time ?!?!...
how to find out the best wiring/electric scheme to avoid drawing too much power from the wall and burning some cables at the fuse box ??
thanks,