S3300 (OP)
Member
Offline
Activity: 280
Merit: 10
|
|
April 17, 2022, 09:01:37 AM |
|
I have this gigabyte motherboard AMD 970A that only knows how to get extremely hot if turned on, it has up to 5 PCIe slots that can be used for crypto mining but the temp issue is scary, here is a view Those heat sinks, the one that has gigabyte written on and the one beside the first PCIe x16 slot are getting extremely hot, I don't know what might be the problem here.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8299
'The right to privacy matters'
|
|
April 17, 2022, 02:43:34 PM |
|
I have this gigabyte motherboard AMD 970A that only knows how to get extremely hot if turned on, it has up to 5 PCIe slots that can be used for crypto mining but the temp issue is scary, here is a view Those heat sinks, the one that has gigabyte written on and the one beside the first PCIe x16 slot are getting extremely hot, I don't know what might be the problem here. what is extremely hot? 100c? or 50c? 50c is about 122f 100c is about 212f 50c wont be an issue 100c is wrong. if you do not have an infrared meter to measure. 100c will give you a burn 🔥 on your finger 50c won’t.
|
|
|
|
Ketesnuko
Member
Offline
Activity: 233
Merit: 12
|
|
April 17, 2022, 03:33:44 PM |
|
That's a AM3+ motherboard, I checked online and some people are complaining about the same thing, I couldn't see anyone getting this issue fixed but I have some things in mind that may help if you don't mind.
1. Did you change the CPU recently? Install old CPU back and check if the heat sink will have a high temp again.
2. Install or flash the latest BIOS update, since its an old AMD motherboard its possible that the team might have released a fix through BIOS update.
3. You can open that heat sink and look if its pad or paste is still intact, try reapplying some paste.
4. Do some google surfing on NorthBridge hot temp and try looking for fix online maybe you might get lucky if all these doesn't work.
|
|
|
|
S3300 (OP)
Member
Offline
Activity: 280
Merit: 10
|
|
April 18, 2022, 06:52:46 AM |
|
I have this gigabyte motherboard AMD 970A that only knows how to get extremely hot if turned on, it has up to 5 PCIe slots that can be used for crypto mining but the temp issue is scary, here is a view Those heat sinks, the one that has gigabyte written on and the one beside the first PCIe x16 slot are getting extremely hot, I don't know what might be the problem here. what is extremely hot? 100c? or 50c? 50c is about 122f 100c is about 212f 50c wont be an issue 100c is wrong. if you do not have an infrared meter to measure. 100c will give you a burn 🔥 on your finger 50c won’t. Thanks for replying, the Northbridge heat sink is the issue, it burnt my finger if I put on the sink for just 4 seconds, im guessing its up to 100°C because its the exact type of hotness I get from the backplate of my RTX 3080 graphic card, is there any solution in mind?.
|
|
|
|
batsonxl
Member
Offline
Activity: 1200
Merit: 26
|
|
April 18, 2022, 12:42:33 PM |
|
take termometer and see whats temps? you cant say or guess by touching it.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8299
'The right to privacy matters'
|
|
April 18, 2022, 01:02:28 PM |
|
I have this gigabyte motherboard AMD 970A that only knows how to get extremely hot if turned on, it has up to 5 PCIe slots that can be used for crypto mining but the temp issue is scary, here is a view Those heat sinks, the one that has gigabyte written on and the one beside the first PCIe x16 slot are getting extremely hot, I don't know what might be the problem here. what is extremely hot? 100c? or 50c? 50c is about 122f 100c is about 212f 50c wont be an issue 100c is wrong. if you do not have an infrared meter to measure. 100c will give you a burn 🔥 on your finger 50c won’t. Thanks for replying, the Northbridge heat sink is the issue, it burnt my finger if I put on the sink for just 4 seconds, im guessing its up to 100°C because its the exact type of hotness I get from the backplate of my RTX 3080 graphic card, is there any solution in mind?. pop the heat sink very carefully and repaste it. get a small fan https://www.newegg.com/noctua-nf-a6x25-flx-case-fan/p/N82E16835608032?small grills https://www.newegg.com/bgears-fan-grill-60mm-silver/p/N82E16811995042?Figure a way to mount this on the freshly pasted heat sink btw here is a good thermometer https://www.amazon.com/Etekcity-Lasergrip-1080-Non-Contact-Thermometer/dp/B00DMI632G/ref=sr_1_3?
|
|
|
|
CryptoATM
Member
Offline
Activity: 368
Merit: 15
|
There is even a more effective solution to this because this problem isn't affecting small numbers of people, your motherboard is higher-end old AMD motherboard so its worth spending extra dollar on, do you know that there are heat sinks built specifically for North Bridge temp? Check this out They works beautifully, you can also add a fan.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8299
'The right to privacy matters'
|
|
April 18, 2022, 10:21:08 PM |
|
There is even a more effective solution to this because this problem isn't affecting small numbers of people, your motherboard is higher-end old AMD motherboard so its worth spending extra dollar on, do you know that there are heat sinks built specifically for North Bridge temp? Check this out They works beautifully, you can also add a fan. that looks really good
|
|
|
|
5W-KILO
Member
Offline
Activity: 234
Merit: 35
Moon.win
|
|
April 19, 2022, 07:29:46 AM |
|
There is even a more effective solution to this because this problem isn't affecting small numbers of people, your motherboard is higher-end old AMD motherboard so its worth spending extra dollar on, do you know that there are heat sinks built specifically for North Bridge temp? Check this out They works beautifully, you can also add a fan. This is a masterpiece 👍 I never knew something like this exists until now, hope it's not scarce to get from online stores, I try to always avoid AMD motherboards at all cost unless they are the latest Ryzen CPU motherboards, I've also never seen where an intel motherboard have a heat issue on its North Bridge and South Bridge parts.
|
|
|
|
CryptoATM
Member
Offline
Activity: 368
Merit: 15
|
|
April 19, 2022, 12:25:23 PM |
|
There is even a more effective solution to this because this problem isn't affecting small numbers of people, your motherboard is higher-end old AMD motherboard so its worth spending extra dollar on, do you know that there are heat sinks built specifically for North Bridge temp? Check this out They works beautifully, you can also add a fan. This is a masterpiece 👍 I never knew something like this exists until now, hope it's not scarce to get from online stores, I try to always avoid AMD motherboards at all cost unless they are the latest Ryzen CPU motherboards, I've also never seen where an intel motherboard have a heat issue on its North Bridge and South Bridge parts. Its not that hard to get, this heat sink is available on Aliexpress and Alibaba website, you can head to the website and use the search engine to find North Bridge Heat Sink you will get positive results, just scroll down until you see your taste but the one above is the best I could found since you can apply a cooling fan which has a big advantage over others.
|
|
|
|
JayDDee
|
|
April 19, 2022, 06:30:48 PM |
|
It's an old board. If it has always been like that just let it be. If it's a new issue it's probably about to fail anyway so don't waste money on that cool heat sink.
|
|
|
|
FP91G
Legendary
Offline
Activity: 1736
Merit: 1070
|
|
April 20, 2022, 08:58:59 AM |
|
These motherboards like to get hot when mining. Buy a fan 40x40 or more and install it on the radiator. This will solve your overheating problem for a few dollars.But these old motherboards can work for a very long time in this mode.
|
|
|
|
S3300 (OP)
Member
Offline
Activity: 280
Merit: 10
|
It's an old board. If it has always been like that just let it be. If it's a new issue it's probably about to fail anyway so don't waste money on that cool heat sink.
This motherboard is a high-end gaming motherboard that supports many features that normal motherboards dont have, I am willing to spend some money on this issue just to get it fixed, I just ordered this heat sink and I hope it will work if the heat reduces the motherboard will last longer, thank you all for your responses, I will drop feedback if it works.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8299
'The right to privacy matters'
|
|
April 20, 2022, 11:23:11 AM |
|
It's an old board. If it has always been like that just let it be. If it's a new issue it's probably about to fail anyway so don't waste money on that cool heat sink.
This motherboard is a high-end gaming motherboard that supports many features that normal motherboards dont have, I am willing to spend some money on this issue just to get it fixed, I just ordered this heat sink and I hope it will work if the heat reduces the motherboard will last longer, thank you all for your responses, I will drop feedback if it works. merited for follow up you should make a new rank. once you get it. remember to test it with a heat gun. btw here is a good thermometer https://www.amazon.com/Etekcity-Lasergrip-1080-Non-Contact-Thermometer/dp/B00DMI632G/ref=sr_1_3?and of course consider a fan 40x40 or 60x60 maybe 80x80
|
|
|
|
BitKongy
Member
Offline
Activity: 405
Merit: 19
|
That's the spirit, you will never know what you will get if you don't try, people like seeing others doing something before they give it a try but in your case, you are willing to give this a shot, I am sure the result will be positive.
|
|
|
|
FP91G
Legendary
Offline
Activity: 1736
Merit: 1070
|
|
April 21, 2022, 06:27:03 AM |
|
It's an old board. If it has always been like that just let it be. If it's a new issue it's probably about to fail anyway so don't waste money on that cool heat sink.
This motherboard is a high-end gaming motherboard that supports many features that normal motherboards dont have, I am willing to spend some money on this issue just to get it fixed, I just ordered this heat sink and I hope it will work if the heat reduces the motherboard will last longer, thank you all for your responses, I will drop feedback if it works. Both chips are heated on this motherboard, heatsinks are expensive to buy. I had a built-in network card burned out on one of these motherboards, possibly due to overheating of the chip. I bought a usb network card. But know that on aliexpress such a motherboard costs 45-50 dollars.
|
|
|
|
VRExpress
Member
Offline
Activity: 263
Merit: 15
|
|
April 21, 2022, 07:37:30 AM |
|
|
|
|
|
philipma1957
Legendary
Online
Activity: 4214
Merit: 8299
'The right to privacy matters'
|
|
April 21, 2022, 11:45:24 AM |
|
years ago I got into btc because It made a little money enough for me to be able to build lots of rigs.
I basically was addict to build modding and upgrading pcs.
Much like a guy that would make hot rod cars.
Damn a lot has changed.
There were times I had 11gh out of 21th .
yeah my hash rate was 11 gh in gpus and the whole btc network was 22th.
that means I was mining 1/2000 of the worlds btc network in my garage.
not because i believed in btc but because i was feeding my pc build addiction. 😀
I look back at it and smile 😃 at how naive I was.
|
|
|
|
FirmWars
Member
Offline
Activity: 239
Merit: 79
|
|
April 21, 2022, 07:34:47 PM |
|
years ago I got into btc because It made a little money enough for me to be able to build lots of rigs.
I basically was addict to build modding and upgrading pcs.
Much like a guy that would make hot rod cars.
Damn a lot has changed.
There were times I had 11gh out of 21th .
yeah my hash rate was 11 gh in gpus and the whole btc network was 22th.
that means I was mining 1/2000 of the worlds btc network in my garage.
not because i believed in btc but because i was feeding my pc build addiction. 😀
I look back at it and smile 😃 at how naive I was.
Any other philipma is a counterfeit, if one isn't addicted to what they love doing then its not addiction, you have my respect man, I am still 34 years old and I hope I can be as good as you are in crypto mining someday, every stories starts from somewhere.
|
|
|
|
FP91G
Legendary
Offline
Activity: 1736
Merit: 1070
|
|
April 22, 2022, 12:36:18 PM |
|
This motherboard has a good aluminum heatsink and does not need to be replaced. It is enough to install an additional cooler for cooling on this radiator.It will be cheaper and the result will be almost the same.
|
|
|
|
|