Trying to avoid burning down my home

[Takyeon]

I am not a certified electrician but I do want to know what type of AMP power my wall socket should be to run a single 2500watt mining rig, pls if you have clue do not hesitate to share, I've heard cases of burning home 🏠due to mining rig starting fire.

[miner29]

2500w at 120v would need 25 amp socket
2500w at 220v would need 15amp socket

So i would go the higher Voltage route and use a Nema 15amp twist lock plug (most of my farm is on these but we have 240v)

Formula is Watts needed / Voltage = Amps. Always round up…ALWAYS…and best to add a few more amps for safety.

[Daodex]

15amp is more than enough if you are from Africa like me, we have 220v here not 120v but the reason why fire starts most of the time is using a cheaply built extension box to run your mining rig, go with a higher amp extension box and also avoid using SATA cable to power graphic cards.

[joker_josue]

I am not a certified electrician but I do want to know what type of AMP power my wall socket should be to run a single 2500watt mining rig, pls if you have clue do not hesitate to share, I've heard cases of burning home 🏠due to mining rig starting fire.

This will depend on several factors.

To be able to help, I will need to know, what is the voltage of your electrical network and how many volts your mining works.


EDIT:
Another question: do you have an exclusive circuit for mining, or do you have other equipment connected to the same circuit?