Antminer S17 defect, suddenly no longer reachable

[arpobtc2]

Hi!
I use an antminer S17 at home. Yesterday, suddenly, mining stopped. Since this moment I cannot reach the miner UI, also ping is not possible. The network itself works, leds for network are on. Any idea, what I could do? A reset changed nothing.
Thanks

[1714762533]

1714762533

[1714762533]

1714762533

[1714762533]

1714762533

[1714762533]

1714762533

[mikeywith]

How did you perform the reset? The safest way would be using an Sdcard to flash different firmware, if that does not fix it -- you will need another control board.

[BitMaxz]

I think he just push the reset button if you want to reset it to factory default I think IP report button will work not the reset button.
You can perform the factory reset by holding the IP report button for 15 seconds then release.

If still does not work try the suggestions above flashing it through the SD card should work but if it still can't able to access through WebGUI then check your cable maybe the terminal has full of dust and rust so try to clean it if not then replace the cable and try to access it with another device and use the older version of chrome to access the miner's IP.

[tornado_blade]

Hi!
I use an antminer S17 at home. Yesterday, suddenly, mining stopped. Since this moment I cannot reach the miner UI, also ping is not possible. The network itself works, leds for network are on. Any idea, what I could do? A reset changed nothing.
Thanks

are your control board leds blinking or on?

[MinerMEDIC]

As a matter of fact I just posted the perfect answer to your question this week. https://bitcointalk.org/index.php?topic=5397621.msg60064378#msg60064378
Cheers!
J