[ANN] Rigel 1.16.3 - Gram, Nexa and IronFish GPU miner (Nvidia only)

[FP91G]

Do not stop. Keep saying that I'm involved with the project. The topic will gain 100 pages of discussion and developers may come here

[1715356236]

1715356236

[1715356236]

1715356236

[oklickmanworld]

Dear dev,
I really look forward to the function of the failover pools in pools.txt file!

You can set failover pools by repeating "-o" parameter for each pool:

Code:

-o <primary_pool_url> -o <failover_pool1_url> -o <failover_pool2_url> -o <failover_pool3_url>

Hello.
I am aware of this possibility.
But I would like to have this functionality in a separate file with backing pools.txt, like Claymore did!

Hi, apart from development effort this would require some extra design work as we'd be introducing another way of passing pool URLs to the miner and need to figure out what takes precedence when and so on. I may put this on my todo list but I'm afraid it'll be low priority for now. Thanks for understanding.

Hello! Please answer, they are asking you! But it seems to me that you don't want to answer questions. Therefore, here I see only insults from other participants.
Please tell me, so will you make this function? In fact, many people need it. After that, we will add your miner.

[Ragnarok01]

Dear dev,
I really look forward to the function of the failover pools in pools.txt file!

You can set failover pools by repeating "-o" parameter for each pool:

Code:

-o <primary_pool_url> -o <failover_pool1_url> -o <failover_pool2_url> -o <failover_pool3_url>

Hello.
I am aware of this possibility.
But I would like to have this functionality in a separate file with backing pools.txt, like Claymore did!

Hi, apart from development effort this would require some extra design work as we'd be introducing another way of passing pool URLs to the miner and need to figure out what takes precedence when and so on. I may put this on my todo list but I'm afraid it'll be low priority for now. Thanks for understanding.

This is a handy and useful feature. I think it should be a high priority.

[FP91G]

New listings of the Kaspa(KAS) coin will cause an influx of new miners
Gate.io will list Kaspa(KAS)
Gate.io is going to commence Kaspa(KAS) trading on 10:00 AM March 21st, 2023 UTC.Kaspa is the fastest, open-source, decentralized & fully scalable Layer-1 in the world.
https://www.gate.io/article/30017

[rigelminer]

Dear dev,
I really look forward to the function of the failover pools in pools.txt file!

You can set failover pools by repeating "-o" parameter for each pool:

Code:

-o <primary_pool_url> -o <failover_pool1_url> -o <failover_pool2_url> -o <failover_pool3_url>

Hello.
I am aware of this possibility.
But I would like to have this functionality in a separate file with backing pools.txt, like Claymore did!

Hi, apart from development effort this would require some extra design work as we'd be introducing another way of passing pool URLs to the miner and need to figure out what takes precedence when and so on. I may put this on my todo list but I'm afraid it'll be low priority for now. Thanks for understanding.

Hello! Please answer, they are asking you! But it seems to me that you don't want to answer questions. Therefore, here I see only insults from other participants.
Please tell me, so will you make this function? In fact, many people need it. After that, we will add your miner.

Hi. You've quoted my answer to that question, I see no reason to repeat myself.

[rigelminer]

Rigel 1.3.10

* (Nexa) Performance/efficiency improvements
As with v1.3.9, set "--kernel 2" to use a more energy efficient implementation for low-end/mid-range 30xx GPUs, otherwise the miner will aim for maximum hashrate even at a cost of higher power draw

[tiradiSoowz]

Dear dev,
I really look forward to the function of the failover pools in pools.txt file!

You can set failover pools by repeating "-o" parameter for each pool:

Code:

-o <primary_pool_url> -o <failover_pool1_url> -o <failover_pool2_url> -o <failover_pool3_url>

Hello.
I am aware of this possibility.
But I would like to have this functionality in a separate file with backing pools.txt, like Claymore did!

Hi, apart from development effort this would require some extra design work as we'd be introducing another way of passing pool URLs to the miner and need to figure out what takes precedence when and so on. I may put this on my todo list but I'm afraid it'll be low priority for now. Thanks for understanding.

Hello! Please answer, they are asking you! But it seems to me that you don't want to answer questions. Therefore, here I see only insults from other participants.
Please tell me, so will you make this function? In fact, many people need it. After that, we will add your miner.

Hi. You've quoted my answer to that question, I see no reason to repeat myself.

+ for the diversity of miners!

I'm waiting for the function to be added.

[rigelminer]

Rigel 1.3.11

* (Nexa) Minor performance/efficiency improvements
* Display average GPU power consumption instead of the most recent value reported by the driver - this reduces fluctuations in power readings and efficiency numbers. The averaging window size can be overridden with --power-avg parameter (default 10 seconds)

[Digital_Seytan]

Hello rigel dev, I am using rigelminer 1.3.9 this is the fastest miner on nexo + zil coin, on the same miner I also tried the Rigel 1.3.11 and Rigel 1.3.12 Rigel 1.4.0 but uses more power and a lot slower unfortunately, that's why do I stick with Rigel 1.3.9 is te best and fastest mining software version

[FP91G]

Rigel 1.3.12

Add --stats-interval parameter to configure GPU stats report frequency
Add support for mining Octa.Space coin
The coin uses ethash algorithm, however you need to set -a octa to prevent the miner rebuilding DAG for dev fee
Dual and triple modes with Kaspa and Zil are supported too.
Bug fixes:

(Kaspa, ETC) Duplicate shares when mining to Flexpool, K1, 2miners and some other pools

https://github.com/rigelminer/rigel/releases/tag/1.3.12
Check all links with this post from the developer.

[safar1980]

Rigel miner has been updated to version 1.4.0

Add support for mining Alephium (-a alephium) and IronFish (-a ironfish), dev fee 0.7%
Dual and triple modes with ETC, ETHW, OCTA and ZIL are supported too.
Bug fixes:

Memory temperature is not displayed on 530+ drivers

[Digital_Seytan]

i tested rigel 1.4.1 and rigel 1.3.9 with same miner 5x gtx 1060  with nexa and zill but rigel 1.4.1  is much slower then rigel 1.3.9 and uses more power why dev ?

[safar1980]

i tested rigel 1.4.1 and rigel 1.3.9 with same miner 5x gtx 1060  with nexa and zill but rigel 1.4.1  is much slower then rigel 1.3.9 and uses more power why dev ?

update your drivers

[FP91G]

Rigel 1.4.1

Add ZIL countdown display in TUI and console reports - experimental feature (enable with --zil-countdown)
(IronFish) Improve compatibility with mining pools - flexpool, herominers, kryptex

https://github.com/rigelminer/rigel/releases/tag/1.4.1
Check all links with this post from the developer.

[safar1980]

Recently, a new version of the miner Rigel 1.4.3 has appeared. improved IronFish mining:
"(IronFish) Minor performance/efficiency improvements
(IronFish) Stratum v2 support for major pools, hashrate increase
Bug fixes:
Overclock settings fail to apply on drivers older than v515"

Links can be found in 1 post by rigelminer (OP)

[Digital_Seytan]

rigelminer 1.4.3 vs lolminer 1.74 with ironfisch coin, lolminer is a bit faster than rigelminer 1.4.3 and with rigelminer you also have a lot of stale shares unfortunately, if possible please solve the problem with stale shears please dev

[sxemini]

rigelminer 1.4.3 vs lolminer 1.74 with ironfisch coin, lolminer is a bit faster than rigelminer 1.4.3 and with rigelminer you also have a lot of stale shares unfortunately, if possible please solve the problem with stale shears please dev

Not really. lolminer use littlebit more power than rigelminer at nearly the same hashrate for me and i have no stale shares since block 0.

@rigelminer

thanks for the new release. works stable and fast

[FP91G]

Rigel 1.4.4

(IronFish) Minor performance improvements
https://github.com/rigelminer/rigel/releases/tag/1.4.4
Check all links with this post from the developer.


https://www.hotbit.io/exchange?symbol=IRONFISH_USDT

It is only very disappointing that there is still no normal light wallet for this coin. Or is it deliberately done so that fewer miners mine this coin?
So far, all the coins on the market are miners only.

[Digital_Seytan]

To much stale shares rigelminer 1.4.4 with 3 x miners on Ironfisch coin with high stale schares why dev ?

[fenomenyaa]

Same here, too much stale shares.