mega_miner (OP)
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 13, 2022, 10:13:23 AM |
|
I have a couple of T17 miners (for repair), some of them show this error: "register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 1, clock counter 0x00000006" in some hashboards this does nothing and after a reboot (never figured out why) it hashes and doesn't have any other problem. In other hashboards the go in an infinite rebooting loop. I tried cleaning them, changing firmware, control board, psu and other things, but non helped. I also tried these things: Asic re-ball (the one mentioned in kernel log, and others around it) Changing asic Re-ball related resistors and capacitors Even in one Hashboard all of the asics where re-balled, but nothing happened Pic reprogramming Pic re-balling Pic changing Temp sensor and related components re-balled or changed Here is a log from a miner that hashes, currently don't have any faulty boards at hand Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406050>] (ubi_io_read_ec_hdr+0x68/0x1cc) [<c0406050>] (ubi_io_read_ec_hdr) from [<c040a1d4>] (ubi_attach+0x130/0x1194) [<c040a1d4>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read 512 bytes CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c040a290>] (ubi_attach+0x1ec/0x1194) [<c040a290>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 362:0, read only 64 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 362:0, read only 64 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 362:0, read only 64 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 362:0, read 64 bytes CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406050>] (ubi_io_read_ec_hdr+0x68/0x1cc) [<c0406050>] (ubi_io_read_ec_hdr) from [<c040a1d4>] (ubi_attach+0x130/0x1194) [<c040a1d4>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read 512 bytes CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c040a290>] (ubi_attach+0x1ec/0x1194) [<c040a290>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 750:0, read only 64 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 750:0, read only 64 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 750:0, read only 64 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 750:0, read 64 bytes CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406050>] (ubi_io_read_ec_hdr+0x68/0x1cc) [<c0406050>] (ubi_io_read_ec_hdr) from [<c040a1d4>] (ubi_attach+0x130/0x1194) [<c040a1d4>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read 512 bytes CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c040a290>] (ubi_attach+0x1ec/0x1194) [<c040a290>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512 ubi1: VID header offset: 512 (aligned 512), data offset: 2048 ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 2817/948, WL threshold: 4096, image sequence number: 1198263195 ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35 ubi1: background thread "ubi_bgt1d" started, PID 720 ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry UBIFS (ubi1:0): recovery needed ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read 512 bytes CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0) [<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100) [<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190) [<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0) [<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c) ubi1: scrubbed PEB 750 (LEB 0:715), data moved to PEB 466 ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read 512 bytes CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0) [<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100) [<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190) [<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0) [<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c) UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model ubi1: scrubbed PEB 362 (LEB 0:444), data moved to PEB 895 ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read 512 bytes CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0) [<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100) [<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190) [<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0) [<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c) ubi1: scrubbed PEB 232 (LEB 0:458), data moved to PEB 708 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb40000 *base_vir_addr = 0xab013 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized Nov 30 10:42:16 (none) local0.notice bmminer: set_start_time_point total_tv_start_sys=876 total_tv_end_sys=877 Nov 30 10:42:19 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_api_detect return: 0 Nov 30 10:42:19 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_update_job return: 0 Nov 30 10:42:20 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_shutdown return: 0 Nov 30 10:42:20 (none) local0.err cgminer: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17 Nov 30 10:42:20 (none) local0.notice cgminer[2820]: about to send detect Nov 30 10:42:20 (none) local0.notice cgminer[2820]: set_start_time_point total_tv_start_sys=880 total_tv_end_sys=881 Nov 30 10:42:20 (none) local0.notice cgminer[2820]: Probing for an alive pool Nov 30 10:42:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:42:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:42:22 (none) local0.notice cgminer[2820]: LOW POWER MODE! Nov 30 10:42:22 (none) local0.notice cgminer[2820]: in stratum_sthread Nov 30 10:42:22 (none) local0.notice cgminer[2820]: Pool 0 difficulty changed to 65536 Nov 30 10:42:22 (none) local0.notice cgminer[2820]: Network diff set to 37T Nov 30 10:42:22 (none) local0.notice cgminer[2820]: POOL 0 support ab mode! Nov 30 10:42:22 (none) local0.notice cgminer[2820]: update job Nov 30 10:42:22 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:42:22 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:42:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:42:22 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:42:23 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Nov 30 10:42:25 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:42:25 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:42:25 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:42:25 (none) local0.notice cgminer[2820]: Accepted b8ceaea7 Diff 90.8K/65536 BTM_SOC 0 pool 0 Nov 30 10:42:27 (none) local0.warn cgminer[2820]: API running in IP access mode on port 4028 (15) Nov 30 10:42:28 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Nov 30 10:42:36 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Nov 30 10:42:36 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Nov 30 10:42:36 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Nov 30 10:42:43 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:42:43 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:42:43 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:42:43 (none) local0.notice cgminer[2820]: Accepted 843a58ab Diff 127K/65536 BTM_SOC 0 pool 0 Nov 30 10:42:43 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:42:43 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:42:43 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:42:43 (none) local0.notice cgminer[2820]: Accepted d9cad673 Diff 77K/65536 BTM_SOC 0 pool 0 Nov 30 10:42:44 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:42:44 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:42:44 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:42:44 (none) local0.notice cgminer[2820]: Accepted f18796a0 Diff 69.5K/65536 BTM_SOC 0 pool 0 Nov 30 10:42:46 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:42:46 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:42:46 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:42:46 (none) local0.notice cgminer[2820]: Accepted 69045da3 Diff 160K/65536 BTM_SOC 0 pool 0 Nov 30 10:42:50 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Nov 30 10:42:50 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:42:50 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:42:50 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:42:50 (none) local0.notice cgminer[2820]: Accepted d5033267 Diff 78.8K/65536 BTM_SOC 0 pool 0 Nov 30 10:42:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:42:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:42:50 (none) local0.notice cgminer[2820]: update job Nov 30 10:42:50 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:42:50 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:42:50 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:42:50 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:42:52 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:42:52 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:42:52 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:42:52 (none) local0.notice cgminer[2820]: Pool 0 difficulty changed to 262144 Nov 30 10:42:52 (none) local0.notice cgminer[2820]: Accepted 75469445 Diff 143K/65536 BTM_SOC 0 pool 0 Nov 30 10:42:52 (none) local0.notice cgminer[2820]: update job Nov 30 10:42:52 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:42:52 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:42:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:42:52 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:43:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:43:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:43:20 (none) local0.notice cgminer[2820]: update job Nov 30 10:43:20 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:43:20 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:43:20 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:43:20 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:43:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:43:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:44:00 (none) local0.notice cgminer[2820]: update job Nov 30 10:44:00 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:44:00 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:44:00 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:44:00 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:44:10 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:44:10 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:44:10 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:44:11 (none) local0.notice cgminer[2820]: Accepted 1f34b743 Diff 538K/262144 BTM_SOC 0 pool 0 Nov 30 10:44:17 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:44:17 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:44:17 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:44:17 (none) local0.notice cgminer[2820]: Accepted 1562ae6b Diff 785K/262144 BTM_SOC 0 pool 0 Nov 30 10:44:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:44:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:44:20 (none) local0.notice cgminer[2820]: update job Nov 30 10:44:20 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:44:20 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:44:20 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:44:20 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:44:20 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Nov 30 10:44:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:44:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:44:58 (none) local0.notice cgminer[2820]: update job Nov 30 10:44:58 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:44:58 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:44:58 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:44:58 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:45:11 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:45:11 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:45:11 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:45:11 (none) local0.notice cgminer[2820]: Accepted 2171d8a5 Diff 502K/262144 BTM_SOC 0 pool 0 Nov 30 10:45:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:45:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:45:20 (none) local0.notice cgminer[2820]: update job Nov 30 10:45:20 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:45:20 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:45:20 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:45:20 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:45:37 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:45:37 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:45:37 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:45:38 (none) local0.notice cgminer[2820]: Accepted 0153690f Diff 12.7M/262144 BTM_SOC 0 pool 0 Nov 30 10:45:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:45:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:46:02 (none) local0.notice cgminer[2820]: update job Nov 30 10:46:02 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:46:02 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:46:02 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:46:02 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:46:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:46:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:46:34 (none) local0.notice cgminer[2820]: update job Nov 30 10:46:34 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:46:34 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:46:34 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:46:34 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:46:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:46:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:46:57 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:46:57 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:46:57 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:46:57 (none) local0.notice cgminer[2820]: Accepted 04d1766b Diff 3.48M/262144 BTM_SOC 0 pool 0 Nov 30 10:47:06 (none) local0.notice cgminer[2820]: update job Nov 30 10:47:06 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:47:06 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:47:06 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:47:06 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:47:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:47:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:47:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:47:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:47:54 (none) local0.notice cgminer[2820]: update job Nov 30 10:47:54 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:47:54 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:47:54 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:47:54 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:47:55 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:47:55 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:47:55 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:47:55 (none) local0.notice cgminer[2820]: Accepted 197623b0 Diff 659K/262144 BTM_SOC 0 pool 0 Nov 30 10:48:09 (none) local0.notice cgminer[2820]: update job Nov 30 10:48:09 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:48:09 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:48:09 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:48:09 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:48:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:48:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:48:39 (none) local0.notice cgminer[2820]: update job Nov 30 10:48:39 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601 Nov 30 10:48:39 (none) local0.notice cgminer[2820]: about to send job, size is 2601 Nov 30 10:48:39 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601 Nov 30 10:48:39 (none) local0.notice bmminer: parse job buf len:2601 Nov 30 10:48:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:48:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use Nov 30 10:48:54 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:48:54 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:48:54 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:48:54 (none) local0.notice cgminer[2820]: Accepted 16637384 Diff 749K/262144 BTM_SOC 0 pool 0 Nov 30 10:49:07 (none) local0.notice bmminer: need data size:478, actual size:478 Nov 30 10:49:07 (none) local0.notice cgminer[2820]: got nonce sz 478 Nov 30 10:49:07 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited Nov 30 10:49:08 (none) local0.notice cgminer[2820]: Accepted 0b3451bf Diff 1.5M/262144 BTM_SOC 0 pool 0 Nov 30 10:49:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2 unable to use Nov 30 10:49:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1 unable to use 2022-11-30 10:35:37 driver-btm-api.c:663:init_freq_mode: This is scan-user version 2022-11-30 10:35:37 driver-btm-api.c:2028:bitmain_soc_init: opt_multi_version = 1 2022-11-30 10:35:37 driver-btm-api.c:2029:bitmain_soc_init: opt_bitmain_ab = 1 2022-11-30 10:35:37 driver-btm-api.c:2030:bitmain_soc_init: opt_bitmain_work_mode = 0 2022-11-30 10:35:37 driver-btm-api.c:2031:bitmain_soc_init: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17 2022-11-30 10:35:37 driver-btm-api.c:2032:bitmain_soc_init: commit version: 1c5be6f 2020-04-20 16:18:14, build by: lol 2020-04-23 16:35:04 2022-11-30 10:35:37 driver-btm-api.c:1844:show_sn: no SN got, please write SN to /nvdata/sn 2022-11-30 10:35:37 driver-btm-api.c:1167:miner_device_init: Detect 256MB control board of XILINX 2022-11-30 10:35:37 driver-btm-api.c:1115:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2022-11-30 10:35:37 thread.c:885:create_read_nonce_reg_thread: create thread 2022-11-30 10:35:43 driver-btm-api.c:1099:init_miner_version: miner ID : 8064642429e04814 2022-11-30 10:35:43 driver-btm-api.c:1105:init_miner_version: FPGA Version = 0xB013 2022-11-30 10:35:45 eeprom.c:425:check_pattern_test_level: invalid pattern test result. ignore 2022-11-30 10:35:47 eeprom.c:425:check_pattern_test_level: invalid pattern test result. ignore 2022-11-30 10:35:49 eeprom.c:425:check_pattern_test_level: invalid pattern test result. ignore 2022-11-30 10:35:49 driver-btm-api.c:737:get_product_id: product_id[0] = 1 2022-11-30 10:35:49 driver-btm-api.c:737:get_product_id: product_id[1] = 1 2022-11-30 10:35:49 driver-btm-api.c:737:get_product_id: product_id[2] = 1 2022-11-30 10:35:49 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[0] = 1 2022-11-30 10:35:49 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[1] = 1 2022-11-30 10:35:49 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[2] = 1 2022-11-30 10:35:49 driver-btm-api.c:1919:bitmain_board_init: g_ccdly_opt = 1 2022-11-30 10:35:49 driver-btm-api.c:676:_set_project_type: project:2 2022-11-30 10:35:49 driver-btm-api.c:706:_set_project_type: Project type: Antminer T17 2022-11-30 10:35:49 driver-btm-api.c:717:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2022-11-30 10:35:49 driver-btm-api.c:718:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2022-11-30 10:35:49 driver-btm-api.c:717:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2022-11-30 10:35:49 driver-btm-api.c:718:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2022-11-30 10:35:49 driver-btm-api.c:717:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2022-11-30 10:35:49 driver-btm-api.c:718:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2022-11-30 10:35:50 driver-btm-api.c:1939:bitmain_board_init: Fan check passed. 2022-11-30 10:35:52 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2022-11-30 10:35:55 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9 2022-11-30 10:35:57 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2022-11-30 10:36:00 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9 2022-11-30 10:36:02 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2022-11-30 10:36:06 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9 2022-11-30 10:36:06 thread.c:880:create_pic_heart_beat_thread: create thread 2022-11-30 10:36:06 power_api.c:55:power_init: power init ... 2022-11-30 10:36:06 driver-btm-api.c:1949:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2022-11-30 10:36:38 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ... 2022-11-30 10:36:43 power_api.c:124:check_voltage_multi: retry time: 0 2022-11-30 10:36:45 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.469053 2022-11-30 10:36:47 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.101670 2022-11-30 10:36:49 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.230254 2022-11-30 10:36:49 power_api.c:97:get_average_voltage: aveage voltage is: 17.266992 2022-11-30 10:36:49 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000 2022-11-30 10:36:49 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2022-11-30 10:37:00 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 29 asic, times 0 2022-11-30 10:37:10 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 1 2022-11-30 10:37:20 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0 2022-11-30 10:37:30 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0 2022-11-30 10:37:34 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1 2022-11-30 10:37:34 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2022-11-30 10:37:34 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1 2022-11-30 10:37:34 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4 2022-11-30 10:37:34 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0 2022-11-30 10:37:34 driver-btm-api.c:1693:check_clock_counter: freq 50 clock_counter_limit 6 2022-11-30 10:37:34 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 1, clock counter 0x00000006 2022-11-30 10:37:35 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2022-11-30 10:37:35 driver-btm-api.c:1981:bitmain_board_init: clock counter status was not good. Try reset. 2022-11-30 10:37:44 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0 2022-11-30 10:37:54 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0 2022-11-30 10:38:06 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0 2022-11-30 10:38:09 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1 2022-11-30 10:38:09 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2022-11-30 10:38:09 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1 2022-11-30 10:38:10 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4 2022-11-30 10:38:10 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0 2022-11-30 10:38:10 driver-btm-api.c:1693:check_clock_counter: freq 50 clock_counter_limit 6 2022-11-30 10:38:10 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 1, clock counter 0x00000006 2022-11-30 10:38:10 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2022-11-30 10:38:10 driver-btm-api.c:1981:bitmain_board_init: clock counter status was not good. Try reset. 2022-11-30 10:38:21 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0 2022-11-30 10:38:30 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0 2022-11-30 10:38:41 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0 2022-11-30 10:38:44 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1 2022-11-30 10:38:44 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2022-11-30 10:38:45 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1 2022-11-30 10:38:45 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4 2022-11-30 10:38:45 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0 2022-11-30 10:38:45 driver-btm-api.c:1693:check_clock_counter: freq 50 clock_counter_limit 6 2022-11-30 10:38:45 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 1, clock counter 0x00000006 2022-11-30 10:38:45 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2022-11-30 10:38:45 driver-btm-api.c:1981:bitmain_board_init: clock counter status was not good. Try reset. 2022-11-30 10:38:45 voltage[0] = 1690 2022-11-30 10:38:45 voltage[1] = 1690 2022-11-30 10:38:45 voltage[2] = 1690 2022-11-30 10:38:45 power_api.c:140:set_working_voltage: working_voltage = 16.900000 2022-11-30 10:38:46 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. 2022-11-30 10:38:48 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. 2022-11-30 10:38:49 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. 2022-11-30 10:38:49 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3 2022-11-30 10:38:51 driver-btm-api.c:252:check_bringup_temp: Bring up temperature is 20 2022-11-30 10:38:51 thread.c:900:create_check_miner_status_thread: create thread 2022-11-30 10:38:51 thread.c:890:create_set_miner_status_thread: create thread 2022-11-30 10:38:51 driver-btm-api.c:613:calculate_timeout: dev->timeout = 392 2022-11-30 10:38:51 thread.c:875:create_temperature_monitor_thread: create thread 2022-11-30 10:38:51 freq_tuning.c:159:freq_tuning_get_max_freq: Max freq of tuning is 760 2022-11-30 10:38:51 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 18.00 ... 2022-11-30 10:39:23 power_api.c:124:check_voltage_multi: retry time: 0 2022-11-30 10:39:25 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.971142 2022-11-30 10:39:27 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.124219 2022-11-30 10:39:29 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.265049 2022-11-30 10:39:29 power_api.c:97:get_average_voltage: aveage voltage is: 18.120136 2022-11-30 10:41:38 driver-btm-api.c:644:set_timeout: freq 670 final timeout=175 2022-11-30 10:41:38 power_api.c:146:set_higher_voltage: higher_voltage = 17.900000 2022-11-30 10:41:38 power_api.c:428:slowly_set_iic_power_to_higher_voltage: slowly setting to voltage: 17.90 ... 2022-11-30 10:42:02 power_api.c:124:check_voltage_multi: retry time: 0 2022-11-30 10:42:03 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.891543 2022-11-30 10:42:05 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.093603 2022-11-30 10:42:08 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.271172 2022-11-30 10:42:08 power_api.c:97:get_average_voltage: aveage voltage is: 18.085439 2022-11-30 10:42:08 frequency.c:654:get_current_min_freq: current min freq 670 2022-11-30 10:42:08 driver-btm-api.c:1693:check_clock_counter: freq 670 clock_counter_limit 85 2022-11-30 10:42:11 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 0, clock counter 0x00000000 2022-11-30 10:42:11 driver-btm-api.c:2139:bitmain_soc_init: clock count check failed after retry, wait for hash rate protect later. 2022-11-30 10:42:11 thread.c:895:create_check_system_status_thread: create thread 2022-11-30 10:42:12 driver-btm-api.c:2155:bitmain_soc_init: Init done! 2022-11-30 10:42:12 driver-btm-api.c:205:set_miner_status: STATUS_INIT 2022-11-30 10:42:16 driver-btm-api.c:205:set_miner_status: STATUS_OKAY 2022-11-30 10:42:22 driver-btm-api.c:1325:dhash_chip_send_job: Version num 4 2022-11-30 10:42:26 thread.c:401:check_working_voltage: current PCB min temperature is 34 2022-11-30 10:42:26 thread.c:402:check_working_voltage: current voltage is 17.90V, recovery to 16.90V 2022-11-30 10:42:26 power_api.c:397:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 16.90 ... 2022-11-30 10:43:00 power_api.c:124:check_voltage_multi: retry time: 0 2022-11-30 10:43:02 power_api.c:86:get_average_voltage: chain[0], voltage is: 16.881240 2022-11-30 10:43:04 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.071054 2022-11-30 10:43:05 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.236377 2022-11-30 10:43:05 power_api.c:97:get_average_voltage: aveage voltage is: 17.062890 2022-11-30 10:48:05 thread.c:441:is_zero_nonce_happened: chain_nonce[0] = 15422 2022-11-30 10:48:05 thread.c:441:is_zero_nonce_happened: chain_nonce[1] = 16147 2022-11-30 10:48:05 thread.c:441:is_zero_nonce_happened: chain_nonce[2] = 15531 2022-11-30 10:48:05 thread.c:497:clear_zero_nonce_mark: 0 nonce protect succeed.
|