[SALE] Bitcoin genesis block stainless steel plate

[philipma1957]

You can really use stainless steel / V2A that material has no corrosion and cost not so much.
That cards are business cards that can marked /graved with a laser and you can write a really small size text. Here are a example for that cards.




Best regards,
Willi

How much for 50 cards all with a hole punched in one corner

first card has:

One

next 49 cards have 4 letters each

[willi9974]

Hi philipma1957,

50 Cards with 80x40x0,4mm or 100x60x0,4mm (single side) depending on availabilty  ~ 150$
50 Cards to make manual a hole in one corner per card, depending on time  ~ 60$
50 Cards marking a individual text (single side) ~ 50$
Shipping depending on your destination ~25-50$

If you can drill the holes per card by your own, that reduce the cost a little bit.
this is a rough estimate.


It sounds you will save your seed words on that cards.

another idea would be, I laser all the cards with the same matrix / table.
a line with letters and the possibility with a hammer and center punch to mark the letters in four lines under the letters.
anyone can do this by themselves, i can also send hammer and center punch.
Then you do not need to tell me your secret seed words


That Matrix / Table as a short excample and than you can mark your letters on the cards by your own with a hammer and punch


Best regards,
Willi

[willi9974]

Up, I have new plates available

A great gift for all Bitcoin fans for the desk or mounting on the wall or put it with the other stuff in the Crypto showcase area of your home.

And keep also a look into my seed plate to keep your chains very save https://bitcointalk.org/index.php?topic=5323755.0

Bulletproof from Jameson Lopp --> https://jlopp.github.io/metal-bitcoin-storage-reviews/reviews/willi-recovery-seed-plate/

Best regards,
Willi

[willi9974]

Up, I have new plates available