mustiko (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2023, 07:14:53 PM Last edit: January 26, 2023, 07:32:16 PM by mustiko |
|
hello, I have 2 t17+ devices, it was working correctly for many years, but 2 weeks ago I got 0 asic found error, I solved this problem by cleaning my device (with cologne). but today I started getting the same error again, same error on my 2 devices. I cleaned it with cologne again today, but it didn't work, I used cellulosic thinner, it still didn't work, I tried a firmware update and it didn't work. I installed hive os and tried it and it didn't work. and there were some problems on my device where I installed hive os. When I click on the system icon, the hiveos screen comes up, but when I click on miner status, the original bitmain screen comes up. How can I solve these problems, thanks. tried hiveos device1 Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203416K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25960K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12920K (cce62000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: bad block at 0x000002420000 nand_read_bbt: bad block at 0x000002440000 nand_read_bbt: bad block at 0x000002460000 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 50/22, WL threshold: 4096, image sequence number: 4094950973 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AB4DF95D-52A4-419D-B203-FC91BE96E568, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 1696/411, WL threshold: 4096, image sequence number: 897013664 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 677AE791-6FAE-4607-ADCA-D4F602F30476, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2023-01-26 18:43:34 driver-btm-api.c:762:init_freq_mode: This is scan-user version 2023-01-26 18:43:34 driver-btm-api.c:2553:bitmain_soc_init: opt_multi_version = 1 2023-01-26 18:43:34 driver-btm-api.c:2554:bitmain_soc_init: opt_bitmain_ab = 1 2023-01-26 18:43:34 driver-btm-api.c:2555:bitmain_soc_init: opt_bitmain_work_mode = 0 2023-01-26 18:43:34 driver-btm-api.c:2556:bitmain_soc_init: Miner compile time: Tue Jun 2 10:11:10 CST 2020 type: Antminer T17+ 2023-01-26 18:43:34 driver-btm-api.c:2557:bitmain_soc_init: commit version: 9e9a5bf 2020-06-01 18:48:14, build by: lol 2020-06-02 10:21:50 2023-01-26 18:43:34 driver-btm-api.c:2180:show_sn: 80404d0c2b10481c�7 2023-01-26 18:43:34 driver-btm-api.c:2237:handle_sn_for_factory_mode: read sn success, 80404d0c2b10481c�7 2023-01-26 18:43:34 fan.c:263:front_fan_power_on: Note: front fan is power on! 2023-01-26 18:43:34 fan.c:273:rear_fan_power_on: Note: rear fan is power on! 2023-01-26 18:43:34 driver-btm-api.c:1357:miner_device_init: Detect 256MB control board of XILINX 2023-01-26 18:43:34 driver-btm-api.c:1298:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2023-01-26 18:43:40 driver-btm-api.c:1281:init_miner_version: miner ID : 80404d0c2b10481c 2023-01-26 18:43:40 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023 2023-01-26 18:43:45 driver-btm-api.c:814:get_product_id: product_id[0] = 0 2023-01-26 18:43:45 driver-btm-api.c:814:get_product_id: product_id[1] = 0 2023-01-26 18:43:45 driver-btm-api.c:814:get_product_id: product_id[2] = 0 2023-01-26 18:43:45 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1 2023-01-26 18:43:45 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1 2023-01-26 18:43:45 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1 2023-01-26 18:43:45 driver-btm-api.c:2293:update_conf_by_power_feedback: Power feedback is disabled 2023-01-26 18:43:45 driver-btm-api.c:2297:update_conf_by_power_feedback: get_calibration_voltage, vol:1830. 2023-01-26 18:43:45 frequency.c:1389:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 62694, index = 4, adjust_vol = 0 2023-01-26 18:43:45 thread.c:1462:create_read_nonce_reg_thread: create thread 2023-01-26 18:43:51 driver-btm-api.c:1281:init_miner_version: miner ID : 80404d0c2b10481c 2023-01-26 18:43:51 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023 2023-01-26 18:43:57 driver-btm-api.c:814:get_product_id: product_id[0] = 0 2023-01-26 18:43:57 driver-btm-api.c:814:get_product_id: product_id[1] = 0 2023-01-26 18:43:57 driver-btm-api.c:814:get_product_id: product_id[2] = 0 2023-01-26 18:43:57 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1 2023-01-26 18:43:57 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1 2023-01-26 18:43:57 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1 2023-01-26 18:43:57 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[0] = 0 2023-01-26 18:43:57 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[1] = 0 2023-01-26 18:43:57 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[2] = 0 2023-01-26 18:43:57 driver-btm-api.c:2439:bitmain_board_init: g_ccdly_opt = 0 2023-01-26 18:43:57 driver-btm-api.c:775:_set_project_type: project:0, set to T17Plus always 2023-01-26 18:43:57 driver-btm-api.c:790:_set_project_type: Project type: Antminer T17+ 2023-01-26 18:43:57 driver-btm-api.c:801:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2023-01-26 18:43:57 driver-btm-api.c:802:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2023-01-26 18:43:57 driver-btm-api.c:801:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2023-01-26 18:43:57 driver-btm-api.c:802:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2023-01-26 18:43:57 driver-btm-api.c:801:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2023-01-26 18:43:57 driver-btm-api.c:802:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2023-01-26 18:43:58 driver-btm-api.c:2461:bitmain_board_init: Fan check passed. 2023-01-26 18:43:59 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2023-01-26 18:44:01 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2023-01-26 18:44:02 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2023-01-26 18:44:04 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2023-01-26 18:44:05 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2023-01-26 18:44:07 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2023-01-26 18:44:07 thread.c:1457:create_pic_heart_beat_thread: create thread 2023-01-26 18:44:09 power_api.c:231:power_init: power type version: 0x0042 2023-01-26 18:44:09 power_api.c:249:power_init: Power init: 2023-01-26 18:44:09 power_api.c:250:power_init: current_voltage_raw = 0 2023-01-26 18:44:09 power_api.c:251:power_init: highest_voltage_raw = 1950 2023-01-26 18:44:09 power_api.c:252:power_init: working_voltage_raw = 1900 2023-01-26 18:44:09 power_api.c:253:power_init: higher_voltage_raw = 1930 2023-01-26 18:44:09 power_api.c:254:power_init: check_asic_voltage_raw = 2000 2023-01-26 18:44:09 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2023-01-26 18:44:09 power_api.c:221:power_off: set gpio907 to 1 2023-01-26 18:44:40 power_api.c:206:power_on: set gpio907 to 0 2023-01-26 18:44:41 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step. 2023-01-26 18:44:59 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 18:45:00 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-26 18:45:00 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.559539, an2 18.610755, an6 2.500000. 2023-01-26 18:45:01 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-26 18:45:01 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.510230, an2 18.586957, an6 2.500000. 2023-01-26 18:45:02 power_api.c:56:_get_avg_voltage: an6 raw = 2.525806, factor = 1.010323 2023-01-26 18:45:02 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.533844, an2 18.636016, an6 2.500000. 2023-01-26 18:45:02 power_api.c:85:_get_avg_voltage: average_voltage = 18.611242 2023-01-26 18:45:02 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.61, check voltage passed. 2023-01-26 18:45:04 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-26 18:45:04 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.559539, an2 18.610755, an6 2.500000. 2023-01-26 18:45:05 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-26 18:45:05 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.510230, an2 18.562660, an6 2.500000. 2023-01-26 18:45:07 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613 2023-01-26 18:45:07 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.533163, an2 18.563775, an6 2.500000. 2023-01-26 18:45:07 power_api.c:85:_get_avg_voltage: average_voltage = 18.579063 2023-01-26 18:45:07 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.58, check voltage passed. 2023-01-26 18:45:07 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26 2023-01-26 18:45:16 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0 2023-01-26 18:45:24 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[1]: find 44 asic, times 0 2023-01-26 18:45:33 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0 2023-01-26 18:45:42 driver-btm-api.c:1163:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1 2023-01-26 18:45:52 driver-btm-api.c:1164:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2 2023-01-26 18:45:52 power_api.c:400:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step. 2023-01-26 18:46:08 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 18:46:10 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-26 18:46:10 power_api.c:60:_get_avg_voltage: chain 0, an0 = 20.094749, an2 20.070422, an6 2.500000. 2023-01-26 18:46:11 power_api.c:56:_get_avg_voltage: an6 raw = 2.525806, factor = 1.010323 2023-01-26 18:46:11 power_api.c:60:_get_avg_voltage: chain 1, an0 = 20.019158, an2 20.019158, an6 2.500000. 2023-01-26 18:46:12 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613 2023-01-26 18:46:12 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.533163, an2 20.066326, an6 2.500000. 2023-01-26 18:46:12 power_api.c:85:_get_avg_voltage: average_voltage = 20.051969 2023-01-26 18:46:12 power_api.c:106:check_voltage: target_vol = 20.00, actural_vol = 20.05, check voltage passed. 2023-01-26 18:46:14 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-26 18:46:14 power_api.c:60:_get_avg_voltage: chain 0, an0 = 20.069054, an2 20.044757, an6 2.500000. 2023-01-26 18:46:15 power_api.c:56:_get_avg_voltage: an6 raw = 2.525806, factor = 1.010323 2023-01-26 18:46:15 power_api.c:60:_get_avg_voltage: chain 1, an0 = 20.019158, an2 20.019158, an6 2.500000. 2023-01-26 18:46:16 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613 2023-01-26 18:46:16 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.533163, an2 20.066326, an6 2.500000. 2023-01-26 18:46:16 power_api.c:85:_get_avg_voltage: average_voltage = 20.043414 2023-01-26 18:46:16 power_api.c:106:check_voltage: target_vol = 20.00, actural_vol = 20.04, check voltage passed. 2023-01-26 18:46:25 driver-btm-api.c:1167:check_asic_number_with_power_on: Chain[2]: find 16 asic, times 3 2023-01-26 18:46:36 driver-btm-api.c:1168:check_asic_number_with_power_on: Chain[2]: find 16 asic, times 4 chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2023-01-26 18:46:45 driver-btm-api.c:1169:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 5 chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2023-01-26 18:46:54 driver-btm-api.c:1170:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 6 2023-01-26 18:46:54 driver-btm-api.c:1235:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2 2023-01-26 18:46:55 driver-btm-api.c:1238:check_asic_number: Chain 2 voltage: an0 = 20.250323, an2 20.299354, an6 2.532258. 2023-01-26 18:46:59 driver-btm-api.c:425:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1 2023-01-26 18:46:59 driver-btm-api.c:425:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2023-01-26 18:47:00 driver-btm-api.c:1931:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0 2023-01-26 18:47:00 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2023-01-26 18:47:00 driver-btm-api.c:1972:check_clock_counter: freq 50 clock_counter_limit 6 2023-01-26 18:47:14 voltage[0] = 1770 2023-01-26 18:47:14 voltage[1] = 1770 2023-01-26 18:47:14 power_api.c:262:set_working_voltage_raw: working_voltage_raw = 1770 2023-01-26 18:47:15 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. NCT218 2023-01-26 18:47:16 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. NCT218 2023-01-26 18:47:16 uart.c:81:set_baud: set fpga_baud = 6000000, fpga_divider = 3 2023-01-26 18:47:17 driver-btm-api.c:294:check_bringup_temp: Bring up temperature is 11 2023-01-26 18:47:17 thread.c:1477:create_check_miner_status_thread: create thread 2023-01-26 18:47:17 thread.c:1467:create_set_miner_status_thread: create thread 2023-01-26 18:47:17 driver-btm-api.c:712:calculate_timeout: dev->timeout = 245 2023-01-26 18:47:17 thread.c:1447:create_temperature_monitor_thread: create thread 2023-01-26 18:47:17 frequency.c:527:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 11 dec_freq_index=0 2023-01-26 18:47:17 freq_tuning.c:184:freq_tuning_get_max_freq: Max freq of tuning is 790 2023-01-26 18:47:17 driver-btm-api.c:1802:send_null_work: [DEBUG] Send null work. 2023-01-26 18:47:17 thread.c:1437:create_asic_status_monitor_thread: create thread 2023-01-26 18:47:17 frequency.c:1194:inc_freq_with_fixed_vco: chain = 255, freq = 700, is_higher_voltage = true 2023-01-26 18:47:17 frequency.c:1210:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 42 2023-01-26 18:47:17 frequency.c:1210:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 50 2023-01-26 18:47:17 frequency.c:1210:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 58 2023-01-26 18:47:17 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step. 2023-01-26 18:47:32 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 18:47:33 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-26 18:47:33 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.610755, an2 18.586427, an6 2.500000. 2023-01-26 18:47:34 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613 2023-01-26 18:47:34 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.515306, an2 18.515306, an6 2.500000. 2023-01-26 18:47:34 power_api.c:85:_get_avg_voltage: average_voltage = 18.550866 2023-01-26 18:47:34 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.55, check voltage passed. 2023-01-26 18:47:36 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-26 18:47:36 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.610755, an2 18.586427, an6 2.500000. 2023-01-26 18:47:38 power_api.c:56:_get_avg_voltage: an6 raw = 2.525806, factor = 1.010323 2023-01-26 18:47:38 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.538954, an2 18.538954, an6 2.500000. 2023-01-26 18:47:38 power_api.c:85:_get_avg_voltage: average_voltage = 18.562690 2023-01-26 18:47:38 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.56, check voltage passed. 2023-01-26 18:47:40 frequency.c:1210:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 60 2023-01-26 18:47:42 frequency.c:1210:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 70 2023-01-26 18:47:44 frequency.c:1210:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 75 2023-01-26 18:47:46 frequency.c:1210:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 84 2023-01-26 18:47:48 frequency.c:1210:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 87 2023-01-26 18:47:50 frequency.c:1210:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 100 2023-01-26 18:47:54 frequency.c:1210:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 105 2023-01-26 18:47:59 frequency.c:1210:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 116 2023-01-26 18:48:03 frequency.c:1210:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 4, _POSTDIV2 = 4, USER_DIV = 1, freq = 131 2023-01-26 18:48:08 frequency.c:1210:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 140 2023-01-26 18:48:12 frequency.c:1210:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 150 2023-01-26 18:48:20 frequency.c:1210:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 4, _POSTDIV2 = 3, USER_DIV = 1, freq = 175 2023-01-26 18:48:28 frequency.c:1210:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 175 2023-01-26 18:48:36 frequency.c:1210:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 210 2023-01-26 18:48:49 frequency.c:1210:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 3, _POSTDIV2 = 3, USER_DIV = 1, freq = 233 2023-01-26 18:49:01 frequency.c:1210:inc_freq_with_fixed_vco: [18] _POSTDIV1 = 4, _POSTDIV2 = 2, USER_DIV = 1, freq = 262 2023-01-26 18:49:19 frequency.c:1210:inc_freq_with_fixed_vco: [19] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 300 2023-01-26 18:49:44 frequency.c:1210:inc_freq_with_fixed_vco: [20] _POSTDIV1 = 3, _POSTDIV2 = 2, USER_DIV = 1, freq = 350 2023-01-26 18:49:44 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1840, step by step. 2023-01-26 18:50:01 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 18:50:02 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-26 18:50:02 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.441177, an2 18.441177, an6 2.500000. 2023-01-26 18:50:03 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613 2023-01-26 18:50:03 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.369898, an2 18.394133, an6 2.500000. 2023-01-26 18:50:03 power_api.c:85:_get_avg_voltage: average_voltage = 18.417654 2023-01-26 18:50:03 power_api.c:106:check_voltage: target_vol = 18.40, actural_vol = 18.42, check voltage passed. 2023-01-26 18:50:05 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-26 18:50:05 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.441177, an2 18.441177, an6 2.500000. 2023-01-26 18:50:06 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613 2023-01-26 18:50:06 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.369898, an2 18.394133, an6 2.500000. 2023-01-26 18:50:06 power_api.c:85:_get_avg_voltage: average_voltage = 18.417654 2023-01-26 18:50:06 power_api.c:106:check_voltage: target_vol = 18.40, actural_vol = 18.42, check voltage passed. 2023-01-26 18:50:38 frequency.c:1210:inc_freq_with_fixed_vco: [21] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 350 2023-01-26 18:51:10 frequency.c:1210:inc_freq_with_fixed_vco: [22] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 420 2023-01-26 18:51:51 frequency.c:1210:inc_freq_with_fixed_vco: [23] _POSTDIV1 = 4, _POSTDIV2 = 1, USER_DIV = 1, freq = 525 2023-01-26 18:53:52 frequency.c:1210:inc_freq_with_fixed_vco: [24] _POSTDIV1 = 3, _POSTDIV2 = 1, USER_DIV = 1, freq = 700 2023-01-26 18:53:52 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1800, step by step. 2023-01-26 18:54:09 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 18:54:11 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-26 18:54:11 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.003836, an2 18.028133, an6 2.500000. 2023-01-26 18:54:12 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613 2023-01-26 18:54:12 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.957908, an2 17.982143, an6 2.500000. 2023-01-26 18:54:12 power_api.c:85:_get_avg_voltage: average_voltage = 18.005138 2023-01-26 18:54:12 power_api.c:106:check_voltage: target_vol = 18.00, actural_vol = 18.01, check voltage passed. 2023-01-26 18:54:14 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-26 18:54:14 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.003836, an2 18.028133, an6 2.500000. 2023-01-26 18:54:15 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903 2023-01-26 18:54:15 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.959237, an2 17.959237, an6 2.500000. 2023-01-26 18:54:15 power_api.c:85:_get_avg_voltage: average_voltage = 17.993685 2023-01-26 18:54:15 power_api.c:106:check_voltage: target_vol = 18.00, actural_vol = 17.99, check voltage passed. 2023-01-26 18:59:54 frequency.c:1231:inc_freq_with_fixed_step: chain = 0, freq_start = 700, freq_end = 700, freq_step = 5, is_higher_voltage = true 2023-01-26 18:59:54 frequency.c:1231:inc_freq_with_fixed_step: chain = 1, freq_start = 700, freq_end = 700, freq_step = 5, is_higher_voltage = true 2023-01-26 18:59:54 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1790, step by step. 2023-01-26 19:00:11 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 19:00:12 power_api.c:56:_get_avg_voltage: an6 raw = 2.525806, factor = 1.010323 2023-01-26 19:00:12 power_api.c:60:_get_avg_voltage: chain 0, an0 = 17.883781, an2 17.908047, an6 2.500000. 2023-01-26 19:00:14 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903 2023-01-26 19:00:14 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.862421, an2 17.862421, an6 2.500000. 2023-01-26 19:00:14 power_api.c:85:_get_avg_voltage: average_voltage = 17.885234 2023-01-26 19:00:14 power_api.c:106:check_voltage: target_vol = 17.90, actural_vol = 17.89, check voltage passed. 2023-01-26 19:00:16 power_api.c:56:_get_avg_voltage: an6 raw = 2.525806, factor = 1.010323 2023-01-26 19:00:16 power_api.c:60:_get_avg_voltage: chain 0, an0 = 17.908047, an2 17.908047, an6 2.500000. 2023-01-26 19:00:17 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903 2023-01-26 19:00:17 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.838217, an2 17.862421, an6 2.500000. 2023-01-26 19:00:17 power_api.c:85:_get_avg_voltage: average_voltage = 17.885234 2023-01-26 19:00:17 power_api.c:106:check_voltage: target_vol = 17.90, actural_vol = 17.89, check voltage passed. 2023-01-26 19:00:17 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 0, start = 700, freq_step = 5 2023-01-26 19:00:18 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 1, start = 700, freq_step = 5 2023-01-26 19:00:20 driver-btm-api.c:743:set_timeout: freq 715 final timeout=102 2023-01-26 19:00:20 power_api.c:268:set_higher_voltage_raw: higher_voltage_raw = 1790 2023-01-26 19:00:20 thread.c:1472:create_check_system_status_thread: create thread 2023-01-26 19:00:20 driver-btm-api.c:2758:bitmain_soc_init: Init done! 2023-01-26 19:00:20 driver-btm-api.c:222:set_miner_status: STATUS_INIT 2023-01-26 19:00:24 driver-btm-api.c:222:set_miner_status: STATUS_OKAY 2023-01-26 19:00:25 frequency.c:316:get_sale_hash_rate_GH: g_sale_hash_rate = 40704 2023-01-26 19:00:31 driver-btm-api.c:1539:dhash_chip_send_job: Version num 4. 2023-01-26 19:00:31 driver-btm-api.c:1686:dhash_chip_send_job: stime.tv_sec 1674759631, block_ntime 1674759628 I wrote the code of the 2nd device in the comment, stuck on the 64k character limit https://prnt.sc/MwtOA8jwSDOshttps://prnt.sc/P9b0Eu14mwSthttps://prnt.sc/S94J-DsyQal4
|
|
|
|
mustiko (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2023, 07:21:08 PM |
|
device 2 no hiveos Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203416K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25960K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12920K (cce62000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: bad block at 0x000002420000 nand_read_bbt: bad block at 0x000002440000 nand_read_bbt: bad block at 0x000002460000 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 51/22, WL threshold: 4096, image sequence number: 4094950973 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AB4DF95D-52A4-419D-B203-FC91BE96E568, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 1499/411, WL threshold: 4096, image sequence number: 897013664 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 677AE791-6FAE-4607-ADCA-D4F602F30476, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2023-01-26 15:52:17 driver-btm-api.c:762:init_freq_mode: This is scan-user version 2023-01-26 15:52:17 driver-btm-api.c:2553:bitmain_soc_init: opt_multi_version = 1 2023-01-26 15:52:17 driver-btm-api.c:2554:bitmain_soc_init: opt_bitmain_ab = 1 2023-01-26 15:52:17 driver-btm-api.c:2555:bitmain_soc_init: opt_bitmain_work_mode = 0 2023-01-26 15:52:17 driver-btm-api.c:2556:bitmain_soc_init: Miner compile time: Tue Jun 2 10:11:10 CST 2020 type: Antminer T17+ 2023-01-26 15:52:17 driver-btm-api.c:2557:bitmain_soc_init: commit version: 9e9a5bf 2020-06-01 18:48:14, build by: lol 2020-06-02 10:21:50 2023-01-26 15:52:17 driver-btm-api.c:2180:show_sn: 8108f50c2b10481c�7 2023-01-26 15:52:17 driver-btm-api.c:2237:handle_sn_for_factory_mode: read sn success, 8108f50c2b10481c�7 2023-01-26 15:52:17 fan.c:263:front_fan_power_on: Note: front fan is power on! 2023-01-26 15:52:17 fan.c:273:rear_fan_power_on: Note: rear fan is power on! 2023-01-26 15:52:17 driver-btm-api.c:1357:miner_device_init: Detect 256MB control board of XILINX 2023-01-26 15:52:17 driver-btm-api.c:1298:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2023-01-26 15:52:23 driver-btm-api.c:1281:init_miner_version: miner ID : 8108f50c2b10481c 2023-01-26 15:52:23 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023 2023-01-26 15:52:28 driver-btm-api.c:814:get_product_id: product_id[0] = 0 2023-01-26 15:52:28 driver-btm-api.c:814:get_product_id: product_id[1] = 0 2023-01-26 15:52:28 driver-btm-api.c:814:get_product_id: product_id[2] = 0 2023-01-26 15:52:28 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1 2023-01-26 15:52:28 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1 2023-01-26 15:52:28 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1 2023-01-26 15:52:28 driver-btm-api.c:2293:update_conf_by_power_feedback: Power feedback is disabled 2023-01-26 15:52:28 driver-btm-api.c:2269:get_calibration_voltage: calibration voltage is error data. 2023-01-26 15:52:28 driver-btm-api.c:2327:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0 2023-01-26 15:52:28 frequency.c:1389:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 62922, index = 4, adjust_vol = 0 2023-01-26 15:52:28 thread.c:1462:create_read_nonce_reg_thread: create thread 2023-01-26 15:52:34 driver-btm-api.c:1281:init_miner_version: miner ID : 8108f50c2b10481c 2023-01-26 15:52:34 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023 2023-01-26 15:52:40 driver-btm-api.c:814:get_product_id: product_id[0] = 0 2023-01-26 15:52:40 driver-btm-api.c:814:get_product_id: product_id[1] = 0 2023-01-26 15:52:40 driver-btm-api.c:814:get_product_id: product_id[2] = 0 2023-01-26 15:52:40 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1 2023-01-26 15:52:40 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1 2023-01-26 15:52:40 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1 2023-01-26 15:52:40 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[0] = 0 2023-01-26 15:52:40 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[1] = 0 2023-01-26 15:52:40 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[2] = 0 2023-01-26 15:52:40 driver-btm-api.c:2439:bitmain_board_init: g_ccdly_opt = 0 2023-01-26 15:52:40 driver-btm-api.c:775:_set_project_type: project:0, set to T17Plus always 2023-01-26 15:52:40 driver-btm-api.c:790:_set_project_type: Project type: Antminer T17+ 2023-01-26 15:52:40 driver-btm-api.c:801:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2023-01-26 15:52:40 driver-btm-api.c:802:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2023-01-26 15:52:40 driver-btm-api.c:801:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2023-01-26 15:52:40 driver-btm-api.c:802:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2023-01-26 15:52:40 driver-btm-api.c:801:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2023-01-26 15:52:40 driver-btm-api.c:802:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2023-01-26 15:52:41 driver-btm-api.c:2461:bitmain_board_init: Fan check passed. 2023-01-26 15:52:42 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2023-01-26 15:52:44 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2023-01-26 15:52:45 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2023-01-26 15:52:47 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2023-01-26 15:52:48 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2023-01-26 15:52:50 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2023-01-26 15:52:50 thread.c:1457:create_pic_heart_beat_thread: create thread 2023-01-26 15:52:52 power_api.c:231:power_init: power type version: 0x0042 2023-01-26 15:52:52 power_api.c:249:power_init: Power init: 2023-01-26 15:52:52 power_api.c:250:power_init: current_voltage_raw = 0 2023-01-26 15:52:52 power_api.c:251:power_init: highest_voltage_raw = 1950 2023-01-26 15:52:52 power_api.c:252:power_init: working_voltage_raw = 1900 2023-01-26 15:52:52 power_api.c:253:power_init: higher_voltage_raw = 1930 2023-01-26 15:52:52 power_api.c:254:power_init: check_asic_voltage_raw = 2000 2023-01-26 15:52:52 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2023-01-26 15:52:52 power_api.c:218:power_off: init gpio907 2023-01-26 15:52:52 power_api.c:221:power_off: set gpio907 to 1 2023-01-26 15:53:23 power_api.c:206:power_on: set gpio907 to 0 2023-01-26 15:53:24 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step. 2023-01-26 15:53:42 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 15:53:43 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:53:43 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.489060, an2 18.535392, an6 2.500000. 2023-01-26 15:53:44 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871 2023-01-26 15:53:44 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.561697, an2 18.487147, an6 2.500000. 2023-01-26 15:53:45 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:53:45 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.513514, an2 18.559845, an6 2.500000. 2023-01-26 15:53:45 power_api.c:85:_get_avg_voltage: average_voltage = 18.527461 2023-01-26 15:53:45 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.53, check voltage passed. 2023-01-26 15:53:47 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:53:47 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.489060, an2 18.535392, an6 2.500000. 2023-01-26 15:53:49 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871 2023-01-26 15:53:49 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.561697, an2 18.487147, an6 2.500000. 2023-01-26 15:53:50 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:53:50 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.513514, an2 18.559845, an6 2.500000. 2023-01-26 15:53:50 power_api.c:85:_get_avg_voltage: average_voltage = 18.527461 2023-01-26 15:53:50 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.53, check voltage passed. 2023-01-26 15:53:50 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26 2023-01-26 15:53:58 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0 2023-01-26 15:54:07 driver-btm-api.c:1163:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1 2023-01-26 15:54:19 driver-btm-api.c:1164:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2 2023-01-26 15:54:19 power_api.c:400:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step. 2023-01-26 15:54:36 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 15:54:37 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:54:37 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.489060, an2 20.027027, an6 2.500000. 2023-01-26 15:54:38 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871 2023-01-26 15:54:38 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.586118, an2 19.976865, an6 2.500000. 2023-01-26 15:54:39 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:54:39 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.537967, an2 20.051480, an6 2.500000. 2023-01-26 15:54:39 power_api.c:85:_get_avg_voltage: average_voltage = 20.018457 2023-01-26 15:54:39 power_api.c:106:check_voltage: target_vol = 20.00, actural_vol = 20.02, check voltage passed. 2023-01-26 15:54:41 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:54:41 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.489060, an2 20.027027, an6 2.500000. 2023-01-26 15:54:42 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871 2023-01-26 15:54:42 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.586118, an2 19.976865, an6 2.500000. 2023-01-26 15:54:43 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:54:43 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.537967, an2 20.051480, an6 2.500000. 2023-01-26 15:54:43 power_api.c:85:_get_avg_voltage: average_voltage = 20.018457 2023-01-26 15:54:43 power_api.c:106:check_voltage: target_vol = 20.00, actural_vol = 20.02, check voltage passed. 2023-01-26 15:54:52 driver-btm-api.c:1167:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3 2023-01-26 15:55:03 driver-btm-api.c:1168:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 4 chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2023-01-26 15:55:12 driver-btm-api.c:1169:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 5 chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2023-01-26 15:55:21 driver-btm-api.c:1170:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 6 2023-01-26 15:55:21 driver-btm-api.c:1235:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0 2023-01-26 15:55:22 driver-btm-api.c:1238:check_asic_number: Chain 0 voltage: an0 = 20.078709, an2 20.078709, an6 2.509677. 2023-01-26 15:55:23 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step. 2023-01-26 15:55:38 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 15:55:39 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161 2023-01-26 15:55:39 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.560976, an2 18.463414, an6 2.500000. 2023-01-26 15:55:40 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:55:40 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.513514, an2 18.559845, an6 2.500000. 2023-01-26 15:55:40 power_api.c:85:_get_avg_voltage: average_voltage = 18.511629 2023-01-26 15:55:40 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.51, check voltage passed. 2023-01-26 15:55:43 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871 2023-01-26 15:55:43 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.561697, an2 18.487147, an6 2.500000. 2023-01-26 15:55:44 power_api.c:56:_get_avg_voltage: an6 raw = 2.506452, factor = 1.002581 2023-01-26 15:55:44 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.513514, an2 18.559845, an6 2.500000. 2023-01-26 15:55:44 power_api.c:85:_get_avg_voltage: average_voltage = 18.523496 2023-01-26 15:55:44 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.52, check voltage passed. 2023-01-26 15:55:53 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[1]: find 44 asic, times 0 2023-01-26 15:56:02 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0 2023-01-26 15:56:05 driver-btm-api.c:425:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2023-01-26 15:56:05 driver-btm-api.c:425:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1 2023-01-26 15:56:05 driver-btm-api.c:1931:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0 2023-01-26 15:56:05 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2023-01-26 15:56:06 driver-btm-api.c:1972:check_clock_counter: freq 50 clock_counter_limit 6 2023-01-26 15:56:20 voltage[1] = 1780 2023-01-26 15:56:20 voltage[2] = 1750 2023-01-26 15:56:20 power_api.c:262:set_working_voltage_raw: working_voltage_raw = 1750 2023-01-26 15:56:21 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. NCT218 2023-01-26 15:56:23 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. NCT218 2023-01-26 15:56:23 uart.c:81:set_baud: set fpga_baud = 6000000, fpga_divider = 3 2023-01-26 15:56:24 driver-btm-api.c:294:check_bringup_temp: Bring up temperature is 11 2023-01-26 15:56:24 thread.c:1477:create_check_miner_status_thread: create thread 2023-01-26 15:56:24 thread.c:1467:create_set_miner_status_thread: create thread 2023-01-26 15:56:24 driver-btm-api.c:712:calculate_timeout: dev->timeout = 245 2023-01-26 15:56:24 thread.c:1447:create_temperature_monitor_thread: create thread 2023-01-26 15:56:24 frequency.c:527:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 11 dec_freq_index=0 2023-01-26 15:56:24 freq_tuning.c:184:freq_tuning_get_max_freq: Max freq of tuning is 790 2023-01-26 15:56:24 driver-btm-api.c:1802:send_null_work: [DEBUG] Send null work. 2023-01-26 15:56:24 thread.c:1437:create_asic_status_monitor_thread: create thread 2023-01-26 15:56:24 frequency.c:1194:inc_freq_with_fixed_vco: chain = 255, freq = 700, is_higher_voltage = true 2023-01-26 15:56:24 frequency.c:1210:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 42 2023-01-26 15:56:24 frequency.c:1210:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 50 2023-01-26 15:56:24 frequency.c:1210:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 58 2023-01-26 15:56:26 frequency.c:1210:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 60 2023-01-26 15:56:28 frequency.c:1210:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 70 2023-01-26 15:56:30 frequency.c:1210:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 75 2023-01-26 15:56:32 frequency.c:1210:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 84 2023-01-26 15:56:34 frequency.c:1210:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 87 2023-01-26 15:56:36 frequency.c:1210:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 100 2023-01-26 15:56:40 frequency.c:1210:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 105 2023-01-26 15:56:45 frequency.c:1210:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 116 2023-01-26 15:56:49 frequency.c:1210:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 4, _POSTDIV2 = 4, USER_DIV = 1, freq = 131 2023-01-26 15:56:54 frequency.c:1210:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 140 2023-01-26 15:56:58 frequency.c:1210:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 150 2023-01-26 15:57:06 frequency.c:1210:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 4, _POSTDIV2 = 3, USER_DIV = 1, freq = 175 2023-01-26 15:57:14 frequency.c:1210:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 175 2023-01-26 15:57:22 frequency.c:1210:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 210 2023-01-26 15:57:35 frequency.c:1210:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 3, _POSTDIV2 = 3, USER_DIV = 1, freq = 233 2023-01-26 15:57:47 frequency.c:1210:inc_freq_with_fixed_vco: [18] _POSTDIV1 = 4, _POSTDIV2 = 2, USER_DIV = 1, freq = 262 2023-01-26 15:58:05 frequency.c:1210:inc_freq_with_fixed_vco: [19] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 300 2023-01-26 15:58:30 frequency.c:1210:inc_freq_with_fixed_vco: [20] _POSTDIV1 = 3, _POSTDIV2 = 2, USER_DIV = 1, freq = 350 2023-01-26 15:58:30 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1840, step by step. 2023-01-26 15:58:49 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 15:58:50 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452 2023-01-26 15:58:50 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.317949, an2 18.317949, an6 2.500000. 2023-01-26 15:58:51 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161 2023-01-26 15:58:51 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.243902, an2 18.390243, an6 2.500000. 2023-01-26 15:58:51 power_api.c:85:_get_avg_voltage: average_voltage = 18.354096 2023-01-26 15:58:51 power_api.c:106:check_voltage: target_vol = 18.40, actural_vol = 18.35, check voltage passed. 2023-01-26 15:58:53 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452 2023-01-26 15:58:53 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.317949, an2 18.317949, an6 2.500000. 2023-01-26 15:58:54 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161 2023-01-26 15:58:54 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.219512, an2 18.390243, an6 2.500000. 2023-01-26 15:58:54 power_api.c:85:_get_avg_voltage: average_voltage = 18.354096 2023-01-26 15:58:54 power_api.c:106:check_voltage: target_vol = 18.40, actural_vol = 18.35, check voltage passed. 2023-01-26 15:59:26 frequency.c:1210:inc_freq_with_fixed_vco: [21] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 350 2023-01-26 15:59:58 frequency.c:1210:inc_freq_with_fixed_vco: [22] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 420 2023-01-26 16:00:39 frequency.c:1210:inc_freq_with_fixed_vco: [23] _POSTDIV1 = 4, _POSTDIV2 = 1, USER_DIV = 1, freq = 525 2023-01-26 16:02:40 frequency.c:1210:inc_freq_with_fixed_vco: [24] _POSTDIV1 = 3, _POSTDIV2 = 1, USER_DIV = 1, freq = 700 2023-01-26 16:02:40 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1800, step by step. 2023-01-26 16:02:57 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 16:02:58 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452 2023-01-26 16:02:58 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.903847, an2 17.903847, an6 2.500000. 2023-01-26 16:02:59 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452 2023-01-26 16:02:59 power_api.c:60:_get_avg_voltage: chain 2, an0 = 17.806411, an2 17.976924, an6 2.500000. 2023-01-26 16:02:59 power_api.c:85:_get_avg_voltage: average_voltage = 17.940385 2023-01-26 16:02:59 power_api.c:106:check_voltage: target_vol = 18.00, actural_vol = 17.94, check voltage passed. 2023-01-26 16:03:01 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-26 16:03:01 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.880921, an2 17.880921, an6 2.500000. 2023-01-26 16:03:02 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161 2023-01-26 16:03:02 power_api.c:60:_get_avg_voltage: chain 2, an0 = 17.829268, an2 17.999999, an6 2.500000. 2023-01-26 16:03:02 power_api.c:85:_get_avg_voltage: average_voltage = 17.940460 2023-01-26 16:03:02 power_api.c:106:check_voltage: target_vol = 18.00, actural_vol = 17.94, check voltage passed. 2023-01-26 16:08:40 frequency.c:1231:inc_freq_with_fixed_step: chain = 1, freq_start = 700, freq_end = 700, freq_step = 5, is_higher_voltage = true 2023-01-26 16:08:40 frequency.c:1231:inc_freq_with_fixed_step: chain = 2, freq_start = 700, freq_end = 700, freq_step = 5, is_higher_voltage = true 2023-01-26 16:08:40 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1790, step by step. 2023-01-26 16:08:58 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-26 16:08:59 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-26 16:08:59 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.807938, an2 17.807938, an6 2.500000. 2023-01-26 16:09:01 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452 2023-01-26 16:09:01 power_api.c:60:_get_avg_voltage: chain 2, an0 = 17.708975, an2 17.879488, an6 2.500000. 2023-01-26 16:09:01 power_api.c:85:_get_avg_voltage: average_voltage = 17.843712 2023-01-26 16:09:01 power_api.c:106:check_voltage: target_vol = 17.90, actural_vol = 17.84, check voltage passed. 2023-01-26 16:09:03 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-26 16:09:03 power_api.c:60:_get_avg_voltage: chain 1, an0 = 17.783610, an2 17.783610, an6 2.500000. 2023-01-26 16:09:04 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452 2023-01-26 16:09:04 power_api.c:60:_get_avg_voltage: chain 2, an0 = 17.733334, an2 17.903847, an6 2.500000. 2023-01-26 16:09:04 power_api.c:85:_get_avg_voltage: average_voltage = 17.843728 2023-01-26 16:09:04 power_api.c:106:check_voltage: target_vol = 17.90, actural_vol = 17.84, check voltage passed. 2023-01-26 16:09:04 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 1, start = 700, freq_step = 5 2023-01-26 16:09:05 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 2, start = 700, freq_step = 5 2023-01-26 16:09:08 driver-btm-api.c:743:set_timeout: freq 725 final timeout=100 2023-01-26 16:09:08 power_api.c:268:set_higher_voltage_raw: higher_voltage_raw = 1790 2023-01-26 16:09:08 thread.c:1472:create_check_system_status_thread: create thread 2023-01-26 16:09:08 driver-btm-api.c:2758:bitmain_soc_init: Init done! 2023-01-26 16:09:08 driver-btm-api.c:222:set_miner_status: STATUS_INIT 2023-01-26 16:09:12 driver-btm-api.c:222:set_miner_status: STATUS_OKAY 2023-01-26 16:09:13 frequency.c:316:get_sale_hash_rate_GH: g_sale_hash_rate = 40704 2023-01-26 16:09:17 driver-btm-api.c:1539:dhash_chip_send_job: Version num 4. 2023-01-26 16:09:17 driver-btm-api.c:1686:dhash_chip_send_job: stime.tv_sec 1674749357, block_ntime 1674749342 2023-01-26 16:39:17 thread.c:255:calc_hashrate_avg: avg rate is 41531.00 in 30 mins 2023-01-26 16:39:17 temperature.c:529:temp_statistics_show: pcb temp 26~55 chip temp 52~80 2023-01-26 17:09:18 thread.c:255:calc_hashrate_avg: avg rate is 41821.10 in 30 mins 2023-01-26 17:09:18 temperature.c:529:temp_statistics_show: pcb temp 26~55 chip temp 51~79 2023-01-26 17:39:19 thread.c:255:calc_hashrate_avg: avg rate is 41462.76 in 30 mins 2023-01-26 17:39:19 temperature.c:529:temp_statistics_show: pcb temp 26~55 chip temp 51~80 2023-01-26 18:09:20 thread.c:255:calc_hashrate_avg: avg rate is 41601.95 in 30 mins 2023-01-26 18:09:20 temperature.c:529:temp_statistics_show: pcb temp 27~55 chip temp 53~79 2023-01-26 18:39:21 thread.c:255:calc_hashrate_avg: avg rate is 41672.77 in 30 mins 2023-01-26 18:39:21 temperature.c:529:temp_statistics_show: pcb temp 28~54 chip temp 53~79 2023-01-26 19:09:23 thread.c:255:calc_hashrate_avg: avg rate is 41246.03 in 30 mins 2023-01-26 19:09:23 temperature.c:529:temp_statistics_show: pcb temp 30~55 chip temp 55~80
|
|
|
|
Gabrics
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 187
Merit: 117
Just digging around
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2023, 08:45:05 PM |
|
Likely hardware issue. Needs repair center fixing which is questionable financially.
|
|
|
|
BitMaxz
Legendary
Offline
Activity: 3360
Merit: 3086
BTC price road to $80k
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2023, 09:42:29 PM |
|
The first logs shows that the 3rd hashboard is 0 ASIC there might be a connection issue between the control board and the 3rd hashboard.
The 2nd logs the 1st hashboard is 0 ASIC and possibly a connection issue.
Do you mind to try to replace the 3rd hashboard from your first device and take the working hashboard from your 2nd device and let see if the issue is just a connection or if it's hashboard issue then update here.
|
|
|
|
mustiko (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2023, 09:55:58 PM |
|
thank you so much @BitMaxz I will post the update here in 7-8 hours because it's 2 am in our country right now.
|
|
|
|
mustiko (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2023, 10:37:48 AM |
|
hi @BitMaxz I installed a working hasboard on the 1st device, which I removed from the 2nd device, it successfully read the asics, but I got a soc init error? I tried to reset it but it still didn't work and when the device was starting up, the green and red lights were not flashing when it should have been. device 1 3 working hash board
Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203416K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25960K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12920K (cce62000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: bad block at 0x000002420000 nand_read_bbt: bad block at 0x000002440000 nand_read_bbt: bad block at 0x000002460000 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 50/22, WL threshold: 4096, image sequence number: 4094950973 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID AB4DF95D-52A4-419D-B203-FC91BE96E568, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 1696/411, WL threshold: 4096, image sequence number: 897013664 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 677AE791-6FAE-4607-ADCA-D4F602F30476, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 2023-01-27 10:04:07 driver-btm-api.c:762:init_freq_mode: This is scan-user version 2023-01-27 10:04:07 driver-btm-api.c:2553:bitmain_soc_init: opt_multi_version = 1 2023-01-27 10:04:07 driver-btm-api.c:2554:bitmain_soc_init: opt_bitmain_ab = 1 2023-01-27 10:04:07 driver-btm-api.c:2555:bitmain_soc_init: opt_bitmain_work_mode = 0 2023-01-27 10:04:07 driver-btm-api.c:2556:bitmain_soc_init: Miner compile time: Tue Jun 2 10:11:10 CST 2020 type: Antminer T17+ 2023-01-27 10:04:07 driver-btm-api.c:2557:bitmain_soc_init: commit version: 9e9a5bf 2020-06-01 18:48:14, build by: lol 2020-06-02 10:21:50 2023-01-27 10:04:07 driver-btm-api.c:2180:show_sn: 80404d0c2b10481c�7 2023-01-27 10:04:07 driver-btm-api.c:2237:handle_sn_for_factory_mode: read sn success, 80404d0c2b10481c�7 2023-01-27 10:04:07 fan.c:263:front_fan_power_on: Note: front fan is power on! 2023-01-27 10:04:07 fan.c:273:rear_fan_power_on: Note: rear fan is power on! 2023-01-27 10:04:07 driver-btm-api.c:1357:miner_device_init: Detect 256MB control board of XILINX 2023-01-27 10:04:07 driver-btm-api.c:1298:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2023-01-27 10:04:13 driver-btm-api.c:1281:init_miner_version: miner ID : 80404d0c2b10481c 2023-01-27 10:04:13 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023 2023-01-27 10:04:18 driver-btm-api.c:814:get_product_id: product_id[0] = 0 2023-01-27 10:04:18 driver-btm-api.c:814:get_product_id: product_id[1] = 0 2023-01-27 10:04:18 driver-btm-api.c:814:get_product_id: product_id[2] = 0 2023-01-27 10:04:18 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1 2023-01-27 10:04:18 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1 2023-01-27 10:04:18 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1 2023-01-27 10:04:18 driver-btm-api.c:2293:update_conf_by_power_feedback: Power feedback is disabled 2023-01-27 10:04:18 driver-btm-api.c:2269:get_calibration_voltage: calibration voltage is error data. 2023-01-27 10:04:18 driver-btm-api.c:2327:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0 2023-01-27 10:04:18 frequency.c:1389:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 62695, index = 4, adjust_vol = 0 2023-01-27 10:04:18 thread.c:1462:create_read_nonce_reg_thread: create thread 2023-01-27 10:04:24 driver-btm-api.c:1281:init_miner_version: miner ID : 80404d0c2b10481c 2023-01-27 10:04:24 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023 2023-01-27 10:04:30 driver-btm-api.c:814:get_product_id: product_id[0] = 0 2023-01-27 10:04:30 driver-btm-api.c:814:get_product_id: product_id[1] = 0 2023-01-27 10:04:30 driver-btm-api.c:814:get_product_id: product_id[2] = 0 2023-01-27 10:04:30 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1 2023-01-27 10:04:30 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1 2023-01-27 10:04:30 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1 2023-01-27 10:04:30 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[0] = 0 2023-01-27 10:04:30 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[1] = 0 2023-01-27 10:04:30 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[2] = 0 2023-01-27 10:04:30 driver-btm-api.c:2439:bitmain_board_init: g_ccdly_opt = 0 2023-01-27 10:04:30 driver-btm-api.c:775:_set_project_type: project:0, set to T17Plus always 2023-01-27 10:04:30 driver-btm-api.c:790:_set_project_type: Project type: Antminer T17+ 2023-01-27 10:04:30 driver-btm-api.c:801:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2023-01-27 10:04:30 driver-btm-api.c:802:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2023-01-27 10:04:30 driver-btm-api.c:801:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2023-01-27 10:04:30 driver-btm-api.c:802:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2023-01-27 10:04:30 driver-btm-api.c:801:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2023-01-27 10:04:30 driver-btm-api.c:802:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2023-01-27 10:04:31 driver-btm-api.c:2461:bitmain_board_init: Fan check passed. 2023-01-27 10:04:32 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2023-01-27 10:04:34 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2023-01-27 10:04:35 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2023-01-27 10:04:37 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2023-01-27 10:04:38 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2023-01-27 10:04:40 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2023-01-27 10:04:40 thread.c:1457:create_pic_heart_beat_thread: create thread 2023-01-27 10:04:42 power_api.c:231:power_init: power type version: 0x0042 2023-01-27 10:04:42 power_api.c:249:power_init: Power init: 2023-01-27 10:04:42 power_api.c:250:power_init: current_voltage_raw = 0 2023-01-27 10:04:42 power_api.c:251:power_init: highest_voltage_raw = 1950 2023-01-27 10:04:42 power_api.c:252:power_init: working_voltage_raw = 1900 2023-01-27 10:04:42 power_api.c:253:power_init: higher_voltage_raw = 1930 2023-01-27 10:04:42 power_api.c:254:power_init: check_asic_voltage_raw = 2000 2023-01-27 10:04:42 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2023-01-27 10:04:42 power_api.c:218:power_off: init gpio907 2023-01-27 10:04:42 power_api.c:221:power_off: set gpio907 to 1 2023-01-27 10:05:13 power_api.c:206:power_on: set gpio907 to 0 2023-01-27 10:05:14 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step. 2023-01-27 10:05:32 power_api.c:120:check_voltage_multi: retry time: 0 2023-01-27 10:05:33 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-27 10:05:33 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.583867, an2 18.586427, an6 2.500000. 2023-01-27 10:05:34 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-27 10:05:34 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.583120, an2 18.514067, an6 2.500000. 2023-01-27 10:05:35 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-27 10:05:35 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.534527, an2 18.562660, an6 2.500000. 2023-01-27 10:05:35 power_api.c:85:_get_avg_voltage: average_voltage = 18.554384 2023-01-27 10:05:35 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.55, check voltage passed. 2023-01-27 10:05:37 power_api.c:56:_get_avg_voltage: an6 raw = 2.519355, factor = 1.007742 2023-01-27 10:05:37 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.583867, an2 18.586427, an6 2.500000. 2023-01-27 10:05:38 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-27 10:05:38 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.583120, an2 18.514067, an6 2.500000. 2023-01-27 10:05:40 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032 2023-01-27 10:05:40 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.534527, an2 18.562660, an6 2.500000. 2023-01-27 10:05:40 power_api.c:85:_get_avg_voltage: average_voltage = 18.554384 2023-01-27 10:05:40 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.55, check voltage passed. 2023-01-27 10:05:40 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26 2023-01-27 10:05:49 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0 2023-01-27 10:05:57 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[1]: find 44 asic, times 0 2023-01-27 10:06:06 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0 2023-01-27 10:06:12 driver-btm-api.c:425:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1 2023-01-27 10:06:12 driver-btm-api.c:425:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2023-01-27 10:06:12 driver-btm-api.c:425:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1 2023-01-27 10:06:12 driver-btm-api.c:1931:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0 2023-01-27 10:06:12 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2023-01-27 10:06:12 driver-btm-api.c:1972:check_clock_counter: freq 50 clock_counter_limit 6 2023-01-27 10:06:35 voltage[0] = 1770 2023-01-27 10:06:35 voltage[1] = 1780 2023-01-27 10:06:35 voltage[2] = 1770 2023-01-27 10:06:35 Voltage are different. Will exit. 2023-01-27 10:06:35 driver-btm-api.c:222:set_miner_status: ERROR_SOC_INIT 2023-01-27 10:06:35 driver-btm-api.c:156:stop_mining: stop mining: soc init failed! 2023-01-27 10:06:35 thread.c:1502:cancel_read_nonce_reg_thread: cancel thread 2023-01-27 10:06:35 driver-btm-api.c:142:killall_hashboard: ****power off hashboard****
|
|
|
|
BitMaxz
Legendary
Offline
Activity: 3360
Merit: 3086
BTC price road to $80k
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2023, 11:34:49 PM |
|
Now it's reading fine now all ASIC are alive it means that your hashboard has a problem About the soc init error it is due to incompatibility because replacing a hashboard always required a tool called Hashboard code editor/ EEPROM editor. All hashboard should match or should be the same like power, frequencies, and serial numbers.
Since you don't have a Hashboard code editor I suggest burn a BraiinsOS and boot it into that miner to test if all hashboard is working fine. Braiins OS can bypass it even if they do have different EEPROM data.
|
|
|
|
mustiko (OP)
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2023, 01:32:32 AM |
|
Hi BitMaxz, I washed the hashboards again with cellulosic thinner before installing them and interestingly I didn't get 0 asic error on the hashboard, it read 44 asic but I got a heat sensor error. and i reset the device and after reset i got 0 asic error again
Why could something like this happen? I couldn't get the code because I reset it
|
|
|
|
BitMaxz
Legendary
Offline
Activity: 3360
Merit: 3086
BTC price road to $80k
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2023, 11:58:36 PM |
|
Hi BitMaxz, I washed the hashboards again with cellulosic thinner before installing them and interestingly I didn't get 0 asic error on the hashboard, it read 44 asic but I got a heat sensor error. and i reset the device and after reset i got 0 asic error again
Why could something like this happen? I couldn't get the code because I reset it
So every time you clean it with thinner it works again but after reset it is gone. There might something on the hashboard that needs to replace or remove. I suggest check the test points from this guide below and if you have multimeter you must check the voltage value of test points if they are normal. - https://www.zeusbtc.com/manuals/Antminer-T17-plus-Hash-Board-Repair-Guide.asp
|
|
|
|
|