mikeywith
Legendary
Offline
Activity: 2380
Merit: 6581
be constructive or S.T.F.U
|
|
February 13, 2023, 12:11:14 PM |
|
What is the size of the cable you used in Germany, if it's below 2mm2 that might not be a good idea to run it on 120V and draw 1000w or so, also the socket type is different, Germany uses type C, and type F sockets, so you will likely have to buy a new cable that fits U.S sockets and can deliver 1000-1200w on 110v, but keep in mind that the PSU can only run the miner at full speed when plugged into 220v.
You can either use the multi-option firmware to underclock the miner, or simply unplug one of the there hashboards to fall below 1000w and you should be good to go.
|