[AUCTION] TWO COINS

[MrMojoRising26]

Hello everyone! I have been experimenting with laser engraved coins lately messing around with some designs for fun here are two of them. Up for auction are two lots I only made 10 of each coin so I figured I would auction a few here. Each lot is 1 coin only. The coins are laser engraved brass 40mm coins each funded with 0.001 BTC The coins addys are engraved on the reverse. I will do different metal types and designs in the near future, but brass helps the shadows pop more on the designs. On a side note I am not sure if grading these is a good idea since the laser really burns into the coins it is not like the coin minting process, but to each their own]

LOT 1

LOT 2

STARTING BID PER LOT: 0.001 BTC

MINIMUM BID INCREMENT PER LOT: 0.0002 BTC

END TIME: AUGUST 14th, 2023, 13:00:00 PDT
**PAYMENT DUE 24 HOURS AFTER AUCTION ENDS**

PAYMENT ADDRESS: 3Q6xqVmawb3B176vvzkZUdUgxDyst9Z1yZ

SNIPE: Any bid made in last 5 minutes PER LOT will extend the auction 5 minutes beyond the ending time PER LOT.
If within those 5 extended minutes, a new bid is made, 5 minutes will be added to the auction from the time of that bid PER LOT.

SHIPPING: $10 USD IF YOUR IN THE USA! IF OUTSIDE THE USA I WILL SHIP TO MINERJONES AND HE CAN RESHIP TO YOUR COUNTRY FEES WILL VARY DEPENDING ON LOCATION

[1714214571]

1714214571

[1714214571]

1714214571

[1714214571]

1714214571

[1714214571]

1714214571

[1714214571]

1714214571

[tweetious]

Lot 1: 0.001BTC
Lot 2: 0.001BTC

[rsincognito]

Lot 1: 0.0015BTC
Lot 2: 0.0015BTC


These are really cool !  Great work

[aoluain]

These are very cool -
are the designs original?
who created the artwork?
will both lots have the same serial number?

[mx12.levins]

Lot 1: 0.0017BTC
Lot 2: 0.0017BTC

[Suzuki Matt]

Beautiful coins. I love the designs. 😍 Another banger by Mybits. LFG!

[CARIBBEAN_TREASURES]

Love me a portrait piece

Are they suppose to be a specific person/ character  or represent a viking and a wizard in general?

[MoparMiningLLC]

Lot 1 .005 BTC
Lot 2 .005 BTC

[minerjones]

Love me a portrait piece

Are they suppose to be a specific person/ character  or represent a viking and a wizard in general?

From what I can see, it is Lord of the Rings themed with Gimli and 2 dwarves on the first coin and then Gandalf on the 2nd coin
Such good detail in the coins... well done!!

Lot 1 .006 BTC
Lot 2 .006 BTC

[av8rjeff]

Wow!  Super cool pieces.  I shall be bidding.

What are you planning to do with the other 9 coins?  Curious minds and all.   

[Kryptowerk]

Okay now! These look amazing, great work! Is this technique also possible with precious metals?
Could imagine it vaporizes too much of the material in the process or some other factors not making clean cuts possible.

Also interested on what's gonna happen with the other coins.
Gosh, the detail and "strength" of these coins is just something new!

[MrMojoRising26]

These are very cool -
are the designs original?
who created the artwork?
will both lots have the same serial number?

Thank you the serials are #3 and #10 not matching I never thought of them as a set. The designs are original a friend of mine did the art. As far as the characters go one is Gandalf the other is just viking warriors, but after MJ mentioned Gimli I can see the resemblance. Out of the 10 coins each most are already reserved by friends weeks ago before I even posted on here. If any are left I will auction them at a later date. I have more stuff in the works so I will try to make more coins available next time.

[MrMojoRising26]

Okay now! These look amazing, great work! Is this technique also possible with precious metals?
Could imagine it vaporizes too much of the material in the process or some other factors not making clean cuts possible.

Also interested on what's gonna happen with the other coins.
Gosh, the detail and "strength" of these coins is just something new!

I did one on a pure silver coin it started out 31.1 grams after the laser it was 28 grams So silver is not a good idea haha I am gonna try titanium and some other metals next

[tldr-hodl]

I seriously don't see that as such insurmountable problem - please, please make a silver Mybits series like that!
Just be honest and explicitly put a final weight in the description...
(Although a proper flex would be figuring out how much is lost and casting your own coin that would be appropriately heavier to end up with 1 ozt )
Anyway I've never seen so alluring coin design, those are truly fantastic!!

Seems like something between Eleutheria coins and Saburov's hobo-nickles.
https://www.saburovart.com/watches?lightbox=dataItem-jfbj5pj5

I did one on a pure silver coin it started out 31.1 grams after the laser it was 28 grams So silver is not a good idea haha I am gonna try titanium and some other metals next

[krogothmanhattan]

  These look amazing! The have the artistic design and complexity of the Eleutheria coins made in the past!

  Love em....This opens up so many possibilities in coin making and artistic design possibilities and its exciting on what can be made.

  Def would love to see what a silver one would look like as well!  Congratulations bro!

[Lesbian Cow]

Great job with the coins, I look forward to seeing what you make going forward.

[mx12.levins]

Lot 2 .0062 BTC

[krogothmanhattan]

Okay now! These look amazing, great work! Is this technique also possible with precious metals?
Could imagine it vaporizes too much of the material in the process or some other factors not making clean cuts possible.

Also interested on what's gonna happen with the other coins.
Gosh, the detail and "strength" of these coins is just something new!

I did one on a pure silver coin it started out 31.1 grams after the laser it was 28 grams So silver is not a good idea haha I am gonna try titanium and some other metals next

     W0uld love to see silver! I really couldnt care less what is burnt out to get the right image on the coin. Do you have any pics of this coin?

       I would not mind if it comes less than 31.1 grams or 1 oz or whatever it started with! 

[Kryptowerk]

Okay now! These look amazing, great work! Is this technique also possible with precious metals?
Could imagine it vaporizes too much of the material in the process or some other factors not making clean cuts possible.

Also interested on what's gonna happen with the other coins.
Gosh, the detail and "strength" of these coins is just something new!

I did one on a pure silver coin it started out 31.1 grams after the laser it was 28 grams So silver is not a good idea haha I am gonna try titanium and some other metals next

Haha, I thought something like that would happen. But I mean a 10% loss shouldn't be too bad (not sure about breathing the air, though). Still would love to see some silver.

Oh, just after finishing typing I see Krogoth just pretty much wrote down what I am thinking. : )

Anyway, great work and please continue.

[Steeley]

Lot 2 - .0064