power setting is at 120th
meter set at 12:06 am
970.37 kwatts
I will post back with wattage in the morning.
972.81 kwatts at 1.06 am
so 2.44 kwatts to do 120th.
20.33 watts a th
I will get more readings in the morning.
9:06 993.17 kwatts
22.80 kwatts in 9 hours is
22.80/9 =2.5333 kwatts for 120 th
or 2533/120= 21.11 watts a th
now that is not much if any power saved from the rated 21 watts a th.
but I have 100% instant fan control.
So my fans are set to 61% about 4900 rpm
which in my garage means I do not hear them.
So this board allows you to run the s19xp in your garage. Without a lot of noise.
update
1016.59 kwatts at 6:06. pm
970.37 kwatts at 12:06 am
46.22 kwatts in 18 hours = 2567 watts an hour
2567/120 =21.39 watts. it is interesting to see the high end meter rates 21.39 watts a th
the software reads 23.8 watts a th
So I tuned at 120 th for 18 hours and basically it gives me no increase in efficiency but it let me lower fans to 61% and noise in the garage is okay
New tune is set for 70 th lowest setting is 60th
70 th looks like this so far
at 8:00 pm. k-watts are 1019.30
at 10:00 pm K-watts are 1022.31 3010 watts
1505/70 = 21.50 watts
I will post back on this.
At midnight I set it to 110 th
1025.78 12 am
1048.35 9 am
22.57 kwatts in 9 hours 2507 watts an hour
so 2507/110 = 22.79 watts a th.
So the epic on down clocks does not seem to lower power use but it easy peasy allows fan controls
now I do have 2 shitty chips on this xp that tend to drop out on this xp. Today I am going with an up clock
this is a 135th machine I will try 145th
I am doing a no tune setting
freq 475
power 13 v
fans 80%
all manual setting