I keep getting "Abnormal Network Status" and "Abnormal Pool Connection" messages on my new unit. I have tried lots of thing but still it does not work. It is a new unit. Here is my log from today:
[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Fri Apr 14 22:05:35 CST 2023
[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[ 0.000000@0] bootconsole [aml_uart0] enabled
[ 0.000000@0] efi: Getting EFI parameters from FDT:
[ 0.000000@0] efi: UEFI not found.
[ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000@0] On node 0 totalpages: 65536
[ 0.000000@0] DMA zone: 1024 pages used for memmap
[ 0.000000@0] DMA zone: 0 pages reserved
[ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[ 0.000000@0] pcpu-alloc:
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs init=/sbin/init
[ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 211680K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 29984K reserved, 20480K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB)
[ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB)
[ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB)
[ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB)
[ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139034 ( 1018 KB)
[ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] axg_aoclkc_init: register ao clk ok!
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_media: register meson media clk
[ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[ 0.000000@0] axg_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[ 0.016902@0] Console: colour dummy device 80x25
[ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.031586@0] pid_max: default: 32768 minimum: 301
[ 0.036434@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[ 0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[ 0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[ 0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[ 0.068604@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[ 0.074904@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[ 0.081203@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[ 0.087503@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[ 0.093803@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[ 0.100103@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[ 0.106462@0] Security Framework initialized
[ 0.110696@0] SELinux: Initializing.
[ 0.114386@0] SELinux: Starting in permissive mode
[ 0.114421@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.121107@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.128839@0] ftrace: allocating 30061 entries in 118 pages
[ 0.186751@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.187567@0] CPU0: update cpu_capacity 1024
[ 0.191891@0] ASID allocator initialised with 32768 entries
[ 0.230030@0] secmon: can't fine clear_range
[ 0.230234@0] EFI services will not be available.
[ 0.233497@0] Meson chip version = RevC (25:C - 23:0)
[ 0.267171@1] Detected VIPT I-cache on CPU1
[ 0.267230@1] CPU1: update cpu_capacity 1024
[ 0.267232@1] CPU1: Booted secondary processor [410fd034]
[ 0.295235@2] Detected VIPT I-cache on CPU2
[ 0.295287@2] CPU2: update cpu_capacity 1024
[ 0.295289@2] CPU2: Booted secondary processor [410fd034]
[ 0.323300@3] Detected VIPT I-cache on CPU3
[ 0.323349@3] CPU3: update cpu_capacity 1024
[ 0.323351@3] CPU3: Booted secondary processor [410fd034]
[ 0.323440@0] Brought up 4 CPUs
[ 0.362661@0] SMP: Total of 4 processors activated.
[ 0.367569@0] CPU features: detected feature: 32-bit EL0 Support
[ 0.373606@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.384158@0] CPU: All CPU(s) started at EL2
[ 0.385346@0] alternatives: patching kernel code
[ 0.390644@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[ 0.397872@0] devtmpfs: initialized
[ 0.412920@0] DMI not present or invalid.
[ 0.413321@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.421292@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.427865@0] pinctrl core: initialized pinctrl subsystem
[ 0.434250@0] NET: Registered protocol family 16
[ 0.457815@0] cpuidle: using governor menu
[ 0.458317@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[ 0.463913@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[ 0.471318@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.477512@0] clkmsr: clkmsr: driver init
[ 0.481530@0] aml_watch_point_probe, in, wp:2
[ 0.486967@0] pstore: using zlib compression
[ 0.490360@0] console [pstore-1] enabled
[ 0.493798@0] pstore: Registered ramoops as persistent store backend
[ 0.500205@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.514567@0] aml_iomap: amlogic iomap probe done
[ 0.521423@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[ 0.523355@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[ 0.623625@0] usbcore: registered new interface driver usbfs
[ 0.623788@0] usbcore: registered new interface driver hub
[ 0.629408@0] usbcore: registered new device driver usb
[ 0.634706@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.639643@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.649020@0] PTP clock support registered
[ 0.653364@0] dmi: Firmware registration failed.
[ 0.658365@0] secmon: reserve_mem_size:0x300000
[ 0.662385@0] secmon secmon: assigned reserved memory node linux,secmon
[ 0.669289@0] secmon: get page:ffffffbf00140000, 5000
[ 0.674003@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[ 0.682404@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.690266@0] NetLabel: Initializing
[ 0.692442@0] NetLabel: domain hash size = 128
[ 0.697042@0] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.702263@0] NetLabel: unlabeled traffic allowed by default
[ 0.708905@0] clocksource: Switched to clocksource arch_sys_counter
[ 0.835745@0] VFS: Disk quotas dquot_6.6.0
[ 0.835893@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.862135@0] NET: Registered protocol family 2
[ 0.863179@0] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.868406@0] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.875048@0] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.881687@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.887599@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.894332@0] NET: Registered protocol family 1
[ 0.899297@0] RPC: Registered named UNIX socket transport module.
[ 0.904735@0] RPC: Registered udp transport module.
[ 0.909608@0] RPC: Registered tcp transport module.
[ 0.914506@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.923592@0] Unpacking initramfs...
[ 1.423684@0] Initramfs unpacking failed: junk in compressed archive
[ 1.430562@0] Freeing initrd memory: 6580K
[ 1.431473@0] hw perfevents: clusterb_enabled = 0
[ 1.433828@0] hw perfevents: cpumasks 0xf, 0x0
[ 1.438273@0] hw perfevents: cluster A irq = 7
[ 1.442842@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.452976@0] audit: initializing netlink subsys (disabled)
[ 1.456309@0] audit: type=2000 audit(1.268:1): initialized
[ 1.463670@0] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 1.487728@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.490638@0] NFS: Registering the id_resolver key type
[ 1.493439@0] Key type id_resolver registered
[ 1.497763@0] Key type id_legacy registered
[ 1.502409@0] fuse init (API version 7.26)
[ 1.507795@0] SELinux: Registering netfilter hooks
[ 1.513945@0] NET: Registered protocol family 38
[ 1.514005@0] Key type asymmetric registered
[ 1.517242@0] Asymmetric key parser 'x509' registered
[ 1.522729@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.529949@0] io scheduler noop registered (default)
[ 1.534985@0] io scheduler deadline registered
[ 1.539719@0] io scheduler cfq registered
[ 1.560055@1] random: fast init done
[ 1.560155@1] random: crng init done
[ 1.560597@0] Unable to detect cache hierarchy for CPU 0
[ 1.597153@0] loop: module loaded
[ 1.602716@0] zram: Added device: zram0
[ 1.603109@0] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.608484@0] libphy: Fixed MDIO Bus: probed
[ 1.612820@0] tun: Universal TUN/TAP device driver, 1.6
[ 1.617153@0] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 1.625389@0] ee eth reset:Addr = ffffff80081fd008
[ 1.632797@0] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 1.634817@0] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.640042@0] Ring mode enabled
[ 1.643280@0] DMA HW capability register supported
[ 1.648004@0] Normal descriptors
[ 1.651327@0] RX Checksum Offload Engine supported
[ 1.656229@0] COE Type 2
[ 1.658857@0] TX Checksum insertion supported
[ 1.663317@0] Wake-Up On Lan supported
[ 1.667269@0] Enable RX Mitigation via HW Watchdog Timer
[ 1.686055@0] libphy: stmmac: probed
[ 1.686108@0] eth%d: PHY ID 00000128 at 0 IRQ POLL (stmmac-0:00) active
[ 1.690670@0] eth%d: PHY ID 00000128 at 3 IRQ POLL (stmmac-0:03)
[ 1.698595@0] PPP generic driver version 2.4.2
[ 1.701573@0] PPP BSD Compression module registered
[ 1.706075@0] PPP Deflate Compression module registered
[ 1.711328@0] PPP MPPE Compression module registered
[ 1.716293@0] NET: Registered protocol family 24
[ 1.721763@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.727688@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.734750@0] usbcore: registered new interface driver cdc_acm
[ 1.739946@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.748349@0] usbcore: registered new interface driver usbserial
[ 1.755054@3] mousedev: PS/2 mouse device common for all mice
[ 1.760580@3] usbcore: registered new interface driver xpad
[ 1.765920@0] i2c /dev entries driver
[ 1.770647@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.774934@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.785905@0] ff803000.serial: clock gate not found
[ 1.787402@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[ 1.794632@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[ 1.809553@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.812240@0] console [ttyS0] enabled
[ 1.819474@0] bootconsole [aml_uart0] disabled
[ 1.829169@1] ff804000.serial: clock gate not found
[ 1.833266@1] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[ 1.840375@1] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 1.850724@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[ 1.856946@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 1.867028@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[ 1.873340@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[ 1.884242@0] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[ 1.893603@0] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[ 1.900100@0] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[ 1.915095@0] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.918915@0] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.931314@0] aml_dma ff63e000.aml_dma: Aml dma
[ 1.934422@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 1.939438@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 1.945755@0] efusekeynum: 4
[ 1.948099@0] efusekeyname: mac offset: 0 size: 6
[ 1.954541@0] efusekeyname: mac_bt offset: 6 size: 6
[ 1.960950@0] efusekeyname: mac_wifi offset: 12 size: 6
[ 1.967375@0] efusekeyname: usid offset: 18 size: 16
[ 1.974201@2] efuse efuse: probe OK!
[ 1.979631@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 1.986925@0] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode
[ 1.991989@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 1.997176@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[ 2.041042@0] meson-mmc: meson_mmc_probe() : success!
[ 2.041298@0] amlogic mtd driver init
[ 2.045376@0] prase_get_dtb_nand_parameter:128,parse dts start
[ 2.050110@0] bl mode descrete
[ 2.052993@0] fip_copies 4
[ 2.055656@0] fip_size 0x200000
[ 2.058796@0] nand_clk_ctrl 0xffe07000
[ 2.062520@0] prase_get_dtb_nand_parameter:234,parse dts end
[ 2.068186@0] nand_clk_ctrl 0xffe07000
[ 2.071909@0] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[ 2.080699@0] plat->aml_nand_device ffffff800a005c10
[ 2.084818@0] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.090878@0] NAND device id: 98 da 90 15 76 16
[ 2.095115@0] NAND device: Manufacturer ID:
[ 2.099183@0] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.106745@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.112179@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.117727@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.123973@0] mtd->oobavail: 0x8
[ 2.127396@0] aml_nand_init 2119: plat-name:bootloader
[ 2.132295@0] Creating 1 MTD partitions on "bootloader":
[ 2.137581@0] 0x000000000000-0x000000200000 : "bootloader"
[ 2.146826@2] bootloader initialized ok
[ 2.146881@2] plat->aml_nand_device ffffff800a005c10
[ 2.151834@2] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.157945@2] NAND device id: 98 da 90 15 76 16
[ 2.162110@2] NAND device: Manufacturer ID:
[ 2.166178@2] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.173757@2] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.179187@2] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.184724@2] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.190978@2] mtd->oobavail: 0x8
[ 2.194453@2] aml_nand_init 2119: plat-name:nandnormal
[ 2.199347@2] bbt_start=20
[ 2.201968@2] env_start=24
[ 2.204633@2] key_start=32
[ 2.207338@2] dtb_start=40
[ 2.210023@2] ddr_start=44
[ 2.212697@2] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[ 2.219233@2] get_free_node 43: bitmap=0
[ 2.222681@2] get_free_node 55: bitmap=1
[ 2.226784@2] get_free_node 43: bitmap=1
[ 2.230480@2] get_free_node 55: bitmap=3
[ 2.234584@2] get_free_node 43: bitmap=3
[ 2.238280@2] get_free_node 55: bitmap=7
[ 2.242180@2] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[ 2.248850@2] nbbt free list:
[ 2.251798@2] blockN=21, ec=-1, dirty_flag=0
[ 2.256044@2] blockN=22, ec=-1, dirty_flag=0
[ 2.260289@2] blockN=23, ec=-1, dirty_flag=0
[ 2.264539@2] aml_nand_scan_rsv_info 1141: page_num=1
[ 2.269974@2] nbbt valid addr: 280000
[ 2.273207@2] aml_nand_bbt_check 1306 bbt is valid, reading.
[ 2.278840@2] aml_nand_read_rsv_info:423,read nbbt info at 280000
[ 2.285113@2] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[ 2.291554@2] get_free_node 43: bitmap=7
[ 2.295046@2] get_free_node 55: bitmap=f
[ 2.299151@2] get_free_node 43: bitmap=f
[ 2.302846@2] get_free_node 55: bitmap=1f
[ 2.307037@2] get_free_node 43: bitmap=1f
[ 2.310819@2] get_free_node 55: bitmap=3f
[ 2.315010@2] get_free_node 43: bitmap=3f
[ 2.318793@2] get_free_node 55: bitmap=7f
[ 2.322983@2] get_free_node 43: bitmap=7f
[ 2.326764@2] get_free_node 55: bitmap=ff
[ 2.330957@2] get_free_node 43: bitmap=ff
[ 2.334749@2] get_free_node 55: bitmap=1ff
[ 2.339018@2] get_free_node 43: bitmap=1ff
[ 2.342886@2] get_free_node 55: bitmap=3ff
[ 2.346960@2] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[ 2.353630@2] nenv free list:
[ 2.356561@2] blockN=25, ec=-1, dirty_flag=0
[ 2.360824@2] blockN=26, ec=-1, dirty_flag=0
[ 2.365071@2] blockN=27, ec=-1, dirty_flag=0
[ 2.369317@2] blockN=28, ec=-1, dirty_flag=0
[ 2.373564@2] blockN=29, ec=-1, dirty_flag=0
[ 2.377811@2] blockN=30, ec=-1, dirty_flag=0
[ 2.382057@2] blockN=31, ec=-1, dirty_flag=0
[ 2.386304@2] aml_nand_scan_rsv_info 1141: page_num=32
[ 2.404375@2] nenv valid addr: 310000
[ 2.404409@2] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[ 2.408785@2] get_free_node 43: bitmap=3ff
[ 2.412653@2] get_free_node 55: bitmap=7ff
[ 2.416944@2] get_free_node 43: bitmap=7ff
[ 2.420782@2] get_free_node 55: bitmap=fff
[ 2.425094@2] get_free_node 43: bitmap=fff
[ 2.428946@2] get_free_node 55: bitmap=1fff
[ 2.433310@2] get_free_node 43: bitmap=1fff
[ 2.437266@2] get_free_node 55: bitmap=3fff
[ 2.441630@2] get_free_node 43: bitmap=3fff
[ 2.445586@2] get_free_node 55: bitmap=7fff
[ 2.449951@2] get_free_node 43: bitmap=7fff
[ 2.453906@2] get_free_node 55: bitmap=ffff
[ 2.458270@2] get_free_node 43: bitmap=ffff
[ 2.462226@2] get_free_node 55: bitmap=1ffff
[ 2.466676@2] get_free_node 43: bitmap=1ffff
[ 2.470719@2] get_free_node 55: bitmap=3ffff
[ 2.474966@2] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.481637@2] nkey free list:
[ 2.484568@2] blockN=32, ec=-1, dirty_flag=0
[ 2.488831@2] blockN=33, ec=-1, dirty_flag=0
[ 2.493078@2] blockN=34, ec=-1, dirty_flag=0
[ 2.497324@2] blockN=35, ec=-1, dirty_flag=0
[ 2.501571@2] blockN=36, ec=-1, dirty_flag=0
[ 2.505817@2] blockN=37, ec=-1, dirty_flag=0
[ 2.510064@2] blockN=38, ec=-1, dirty_flag=0
[ 2.514311@2] blockN=39, ec=-1, dirty_flag=0
[ 2.518558@2] aml_nand_scan_rsv_info 1141: page_num=16
[ 2.523668@2] nkey valid addr: fffffffffffe0000
[ 2.528178@2] aml_nand_key_check 1251 NO key exist
[ 2.532946@2] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[ 2.539593@2] get_free_node 43: bitmap=3ffff
[ 2.543433@2] get_free_node 55: bitmap=7ffff
[ 2.547884@2] get_free_node 43: bitmap=7ffff
[ 2.551926@2] get_free_node 55: bitmap=fffff
[ 2.556377@2] get_free_node 43: bitmap=fffff
[ 2.560419@2] get_free_node 55: bitmap=1fffff
[ 2.564753@2] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[ 2.571423@2] ndtb free list:
[ 2.574371@2] blockN=41, ec=-1, dirty_flag=0
[ 2.578617@2] blockN=42, ec=-1, dirty_flag=0
[ 2.582864@2] blockN=43, ec=-1, dirty_flag=0
[ 2.587109@2] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.605186@2] ndtb valid addr: 500000
[ 2.605220@2] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[ 2.609678@2] get_free_node 43: bitmap=1fffff
[ 2.613807@2] get_free_node 55: bitmap=3fffff
[ 2.618344@2] get_free_node 43: bitmap=3fffff
[ 2.622473@2] get_free_node 55: bitmap=7fffff
[ 2.626806@2] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.633476@2] nddr free list:
[ 2.636407@2] blockN=44, ec=-1, dirty_flag=0
[ 2.640671@2] blockN=45, ec=-1, dirty_flag=0
[ 2.644918@2] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.650030@2] nddr valid addr: fffffffffffe0000
[ 2.654537@2] aml_nand_ddr_check 1281 NO ddr exist
[ 2.659307@2] tpl: off 8388608, size 8388608
[ 2.757256@2] NAND bbt detect factory Bad block at c000000
[ 2.757307@2] aml_nand_add_partition:394 factory bad addr=600
[ 2.762990@2] NAND bbt detect factory Bad block at c020000
[ 2.768491@2] aml_nand_add_partition:394 factory bad addr=601
[ 2.808108@2] Creating 6 MTD partitions on "nandnormal":
[ 2.808155@2] 0x000000800000-0x000001000000 : "tpl"
[ 2.819503@0] 0x000001000000-0x000001200000 : "misc"
[ 2.822667@1] 0x000001200000-0x000002200000 : "recovery"
[ 2.834693@0] 0x000002200000-0x000004200000 : "boot"
[ 2.853859@0] 0x000004200000-0x000004700000 : "config"
[ 2.858509@0] 0x000004700000-0x000010000000 : "nvdata"
[ 2.923106@0] NAND bbt detect factory Bad block at c000000
[ 2.923221@0] NAND bbt detect factory Bad block at c020000
[ 2.964840@2] nandnormal initialized ok
[ 2.965000@2] aml_ubootenv_init: register env chardev
[ 2.968427@2] aml_ubootenv_init: register env chardev OK
[ 2.973522@2] amlnf_dtb_init: register dtb cdev
[ 2.978240@3] amlnf_dtb_init: register dtd cdev OK
[ 2.982730@3] mtd_nand_probe 267 , err = 0
[ 2.987836@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 2.993264@2] input: aml_vkeypad as /devices/platform/rtc/input/input0
[ 3.000263@3] unifykey: storage in base: 0xffffffc005000000
[ 3.004881@3] unifykey: storage out base: 0xffffffc005040000
[ 3.010482@3] unifykey: storage block base: 0xffffffc005080000
[ 3.016291@3] unifykey: probe done!
[ 3.020467@3] unifykey: no efuse-version set, use default value: -1
[ 3.026009@3] unifykey: key unify config unifykey-num is 6
[ 3.031526@3] unifykey: key unify fact unifykey-num is 6
[ 3.036787@3] unifykey: unifykey_devno: f200000
[ 3.041718@1] unifykey: device unifykeys created ok
[ 3.046244@1] unifykey: aml_unifykeys_init done!
[ 3.051115@1] sysled: module init
[ 3.054607@1] meson_wdt ffd0f0d0.watchdog: start watchdog
[ 3.059419@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.066765@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.075447@3] dmc_monitor_probe
[ 3.081265@3] defendkey defendkey: Reserved memory is not enough!
[ 3.082075@3] defendkey: probe of defendkey failed with error -22
[ 3.088492@3] GACT probability NOT on
[ 3.091851@3] Mirror/redirect action on
[ 3.095612@3] u32 classifier
[ 3.098446@3] Actions configured
[ 3.102013@3] Netfilter messages via NETLINK v0.30.
[ 3.107287@3] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 3.113469@3] ctnetlink v0.93: registering with nfnetlink.
[ 3.119300@3] xt_time: kernel timezone is -0000
[ 3.123075@3] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.129736@3] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.134377@3] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.139871@3] Initializing XFRM netlink socket
[ 3.145430@3] NET: Registered protocol family 10
[ 3.151303@3] mip6: Mobile IPv6
[ 3.151953@3] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.157937@3] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.165963@3] NET: Registered protocol family 17
[ 3.168159@3] NET: Registered protocol family 15
[ 3.172821@3] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.185949@3] l2tp_core: L2TP core driver, V2.0
[ 3.190337@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.195255@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.201011@3] l2tp_netlink: L2TP netlink interface
[ 3.205797@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.211880@3] l2tp_debugfs: L2TP debugfs support
[ 3.216499@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.223060@3] NET: Registered protocol family 35
[ 3.227989@3] Key type dns_resolver registered
[ 3.232577@3] Registered swp emulation handler
[ 3.236444@3] Registered cp15_barrier emulation handler
[ 3.241634@3] Registered setend emulation handler
[ 3.246377@3] disable EAS feature
[ 3.251012@1] registered taskstats version 1
[ 3.267490@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.773978@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.774064@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.782379@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[ 3.790796@3] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[ 3.798279@2] hub 1-0:1.0: USB hub found
[ 3.800689@2] hub 1-0:1.0: 1 port detected
[ 3.805403@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.810370@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.818278@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.827726@3] hub 2-0:1.0: USB hub found
[ 3.830362@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.837645@3] usb usb2: Unsupported the hub
[ 3.842390@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:29:07 UTC (1420072147)
[ 3.850479@3] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d1a7000)
[ 3.850558@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.858462@3] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[ 3.858475@3] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00b422600
[ 3.959061@3] dwc_otg: Core Release: 3.10a
[ 3.959114@3] dwc_otg: Setting default values for core params
[ 3.963299@3] dwc_otg: curmode: 0, host_only: 0
[ 3.967805@3] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[ 3.980313@3] dwc_otg: Using Buffer DMA mode
[ 3.980350@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.984257@3] dwc_otg: Working on port type = SLAVE
[ 3.989114@3] dwc_otg: Dedicated Tx FIFOs mode
[ 3.996021@3] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[ 4.002824@3] cpucore_cooling_register, max_cpu_core_num:4
[ 4.015194@0] gxbb_pm: enter meson_pm_probe!
[ 4.015252@0] no vddio3v3_en pin
[ 4.016948@0] pm-meson aml_pm: Can't get switch_clk81
[ 4.021990@0] gxbb_pm: meson_pm_probe done
[ 4.026983@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.033288@0] Freeing unused kernel memory: 3648K
[ 4.047664@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.300710@3] ubi0: attaching mtd5
[ 4.320225@3] ubi0: scanning is finished
[ 4.325199@1] ubi0: attached mtd5 (name "config", size 5 MiB)
[ 4.325325@1] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.332371@1] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.339302@1] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.346398@1] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[ 4.352470@1] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.359838@1] ubi0: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 1716094475
[ 4.369111@1] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[ 4.378309@3] ubi0: background thread "ubi_bgt0d" started, PID 1078
[ 4.391454@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1082
[ 4.430413@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[ 4.432802@2] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.442883@2] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.453094@2] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[ 4.459682@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A5F754E4-D7B0-4D0A-9EB4-65E02EA72F45, small LPT model
[ 4.484198@1] ubi2: attaching mtd6
[ 4.949370@1] NAND bbt detect factory Bad block at c000000
[ 4.949495@1] NAND bbt detect factory Bad block at c020000
[ 5.199866@1] ubi2: scanning is finished
[ 5.207388@0] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[ 5.207687@0] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.214743@0] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.221662@0] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.228757@0] ubi2: good PEBs: 1478, bad PEBs: 2, corrupted PEBs: 0
[ 5.235005@0] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.242365@0] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3458390618
[ 5.251644@0] ubi2: available PEBs: 0, total reserved PEBs: 1478, PEBs reserved for bad PEB handling: 2
[ 5.261024@3] ubi2: background thread "ubi_bgt2d" started, PID 1090
[ 5.274066@0] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1094
[ 5.310774@2] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdada_log"
[ 5.313125@2] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.323145@2] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 5.333972@2] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.340734@2] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID C73E900D-8EC3-479B-AEAF-A7A79436E725, small LPT model
[ 5.570030@3] eth0: device MAC address 02:76:98:f1:d3:4d
[ 5.654511@1] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.655884@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.903778@1] uart_trans: loading out-of-tree module taints kernel.
[ 5.906179@1] register uart_trans chrdev success.
[ 5.909735@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[ 5.917171@1] tty port open success [/dev/ttyS3]!
[ 5.921825@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[ 5.930241@1] init sucess for tty struct (246:3) [/dev/ttyS3]
[ 5.936403@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[ 5.944060@1] tty port open success [/dev/ttyS2]!
[ 5.948735@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[ 5.957089@1] init sucess for tty struct (246:2) [/dev/ttyS2]
[ 5.963253@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 5.970880@1] tty port open success [/dev/ttyS1]!
[ 5.975597@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 5.983962@1] init sucess for tty struct (246:1) [/dev/ttyS1]
[ 5.990071@1] create workqueue success!
[ 7.705147@1] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 7.708261@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.602157@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 26.942151@1] uart trans dev open.
[ 26.942269@1] uart_buf virt addr = 0xffffffc00b180000
[ 26.945020@1] uart_buf phys addr = 0x0b180000
[ 26.949321@1] uart_buf pfn = 0x0000b180
[ 26.954095@1] uart trans stop send work timer.
[ 26.958275@1] uart trans set chain exist bits:0x7.
[ 26.962875@1] uart trans set work queue count 768.
===========================================Miner log===========================================
2015-01-01 00:29:14 Miner compile time: Fri Apr 14 21:39:58 CST 2023 type: Antminer BHB42XXX sn :YNAHADUBCJCBE0JJM
2015-01-01 00:29:15 This is fix-freq version
2015-01-01 00:29:15 Miner compile time: Fri Apr 14 21:39:58 CST 2023 type: Antminer BHB42XXX
2015-01-01 00:29:15 Miner sn: YNAHADUBCJCBE0JJM
2015-01-01 00:29:15 commit version: 1883307 2023-04-11 09:54:33, build by: jenkins 2023-04-14 21:55:05
2015-01-01 00:29:15 opt_multi_version = 1
2015-01-01 00:29:15 opt_bitmain_ab = 1
2015-01-01 00:29:15 mid_auto_gen = 1
2015-01-01 00:29:15 opt_bitmain_work_mode = 0
2015-01-01 00:29:15 port 439 already exported
2015-01-01 00:29:15 port 454 already exported
2015-01-01 00:29:15 port 440 already exported
2015-01-01 00:29:15 port 455 already exported
2015-01-01 00:29:15 port 441 already exported
2015-01-01 00:29:15 port 456 already exported
2015-01-01 00:29:15 port 438 already exported
2015-01-01 00:29:15 port 453 already exported
2015-01-01 00:29:15 port 446 already exported
2015-01-01 00:29:15 port 445 already exported
2015-01-01 00:29:15 Note: front fan is power on!
2015-01-01 00:29:15 Note: rear fan is power on!
2015-01-01 00:29:15 start the http log.
2015-01-01 00:29:15 httpListenThread start ret=0
2015-01-01 00:29:15 start listen on 6060 ...
2015-01-01 00:29:15 bad chain id = 3
2015-01-01 00:29:18 bad chain id = 3
2015-01-01 00:29:20 ==========================capability start==========================
2015-01-01 00:29:20 board num = 3
2015-01-01 00:29:20 board id = 0, chain num = 1
2015-01-01 00:29:20 chain id = 0
2015-01-01 00:29:20 board id = 1, chain num = 1
2015-01-01 00:29:20 chain id = 1
2015-01-01 00:29:20 board id = 2, chain num = 1
2015-01-01 00:29:20 chain id = 2
2015-01-01 00:29:20 ==========================capability end============================
2015-01-01 00:29:20 chain num = 3
2015-01-01 00:29:20 skip loading levels for now
2015-01-01 00:29:24 load chain 0 eeprom data
2015-01-01 00:29:27 load chain 1 eeprom data
2015-01-01 00:29:30 load chain 2 eeprom data
2015-01-01 00:29:30 miner type: Antminer S19j Pro+
2015-01-01 00:29:30 multi machine mode
2015-01-01 00:29:30 load machine BHB42612 conf
2015-01-01 00:29:30 machine : BHB42612
2015-01-01 00:29:30 chain_num 4, chain_domain_num 40, chain_asic_num 120, domain_asic_num 3
2015-01-01 00:29:30 get mix boardname[0][BHB42612], name:BHB42612
2015-01-01 00:29:30 fan_eft : 0 fan_pwm : 100
2015-01-01 00:29:30 create thread get_nonce_and_register_thread
2015-01-01 00:29:30 fixed working voltage = 1320
2015-01-01 00:29:30 fixed frequency is 660
2015-01-01 00:29:30 Chain
2015-01-01 00:29:30 Chain
2015-01-01 00:29:30 Chain [1] PCB Version: 0x0100
2015-01-01 00:29:30 Chain [1] BOM Version: 0x0010
2015-01-01 00:29:30 Chain [2] PCB Version: 0x0100
2015-01-01 00:29:30 Chain [2] BOM Version: 0x0010
2015-01-01 00:29:30 bad chain id = 3
2015-01-01 00:29:30 Fan check passed.
2015-01-01 00:29:30 uart_trans addr:0xf7349000.
2015-01-01 00:29:30 max sensor num = 4
2015-01-01 00:29:30 STATUS_INITED: soc init done!
2015-01-01 00:29:30 temperature_monitor_thread start...
2015-01-01 00:36:07 reload pool, need recalculate
2015-01-01 00:36:07 set_start_time_point total_tv_start_sys=424 total_tv_end_sys=425
