Hi All,
purchased second hand S9i.
Unable to achieve green light status - but can see on network and get Kernel log.
Looking at the log - Bmminer not found is that the issue? - newbie - please be gentle:)
Cheers
Kenny
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06e8cf4 (7044 kB)
[ 0.000000] .init : 0xc06e9000 - 0xc071d480 ( 210 kB)
[ 0.000000] .data : 0xc071e000 - 0xc0767058 ( 293 kB)
[ 0.000000] .bss : 0xc0767064 - 0xc07a7d64 ( 260 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000293] ps7-ttc #0 at df804000, irq=43
[ 0.000590] Console: colour dummy device 80x30
[ 0.000619] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040195] pid_max: default: 32768 minimum: 301
[ 0.040404] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040425] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042607] CPU: Testing write buffer coherency: ok
[ 0.042920] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042977] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[ 0.043196] L310 cache controller enabled
[ 0.043215] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120985] CPU1: Booted secondary processor
[ 0.210216] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210345] Brought up 2 CPUs
[ 0.210364] SMP: Total of 2 processors activated.
[ 0.210373] CPU: All CPU(s) started in SVC mode.
[ 0.211034] devtmpfs: initialized
[ 0.213480] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214672] regulator-dummy: no parameters
[ 0.222060] NET: Registered protocol family 16
[ 0.224271] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226547] cpuidle: using governor ladder
[ 0.226561] cpuidle: using governor menu
[ 0.233966] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235489] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235502] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235608] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257982] bio: create slab <bio-0> at 0
[ 0.259367] vgaarb: loaded
[ 0.260056] SCSI subsystem initialized
[ 0.261017] usbcore: registered new interface driver usbfs
[ 0.261507] usbcore: registered new interface driver hub
[ 0.261743] usbcore: registered new device driver usb
[ 0.262266] media: Linux media interface: v0.10
[ 0.262423] Linux video capture interface: v2.00
[ 0.262662] pps_core: LinuxPPS API ver. 1 registered
[ 0.262673] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.262796] PTP clock support registered
[ 0.263148] EDAC MC: Ver: 3.0.0
[ 0.264193] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266923] DMA-API: preallocated 4096 debug entries
[ 0.266936] DMA-API: debugging enabled by kernel config
[ 0.267005] Switched to clocksource arm_global_timer
[ 0.287646] NET: Registered protocol family 2
[ 0.288290] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.288346] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288432] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288478] TCP: reno registered
[ 0.288496] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288527] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288764] NET: Registered protocol family 1
[ 0.289094] RPC: Registered named UNIX socket transport module.
[ 0.289106] RPC: Registered udp transport module.
[ 0.289115] RPC: Registered tcp transport module.
[ 0.289123] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289135] PCI: CLS 0 bytes, default 64
[ 0.289558] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291575] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293615] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293811] msgmni has been set to 967
[ 0.294580] io scheduler noop registered
[ 0.294593] io scheduler deadline registered
[ 0.294632] io scheduler cfq registered (default)
[ 0.307631] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.307651] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.431409] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.998611] console [ttyPS0] enabled
[ 1.002854] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.010484] [drm] Initialized drm 1.1.0 20060810
[ 1.027478] brd: module loaded
[ 1.036819] loop: module loaded
[ 1.046237] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.052364] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.060273] libphy: XEMACPS mii bus: probed
[ 1.064641] ------------- phy_id = 0x3625e62
[ 1.069390] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.077973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.084587] ehci-pci: EHCI PCI platform driver
[ 1.091834] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.098678] usbcore: registered new interface driver usb-storage
[ 1.105509] mousedev: PS/2 mouse device common for all mice
[ 1.111626] i2c /dev entries driver
[ 1.118534] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.124009] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.129926] Xilinx Zynq CpuIdle Driver started
[ 1.134777] sdhci: Secure Digital Host Controller Interface driver
[ 1.140977] sdhci: Copyright(c) Pierre Ossman
[ 1.145252] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.152063] mmc0: no vqmmc regulator found
[ 1.156078] mmc0: no vmmc regulator found
[ 1.197036] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205710] usbcore: registered new interface driver usbhid
[ 1.211219] usbhid: USB HID core driver
[ 1.215956] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222246] nand: Micron MT29F2G08ABAEAWP
[ 1.226222] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232163] Bad block table found at page 131008, version 0x01
[ 1.238407] Bad block table found at page 130944, version 0x01
[ 1.244455] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250231] Creating 3 MTD partitions on "pl353-nand":
[ 1.255329] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263370] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270683] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279379] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[ 1.285904] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.291244] TCP: cubic registered
[ 1.294473] NET: Registered protocol family 17
[ 1.299188] Registering SWP/SWPB emulation handler
[ 1.305078] regulator-dummy: disabling
[ 1.309457] UBI: attaching mtd1 to ubi0
[ 1.833657] UBI: scanning is finished
[ 1.845270] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.852344] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.859107] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.865772] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.872649] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.878630] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.885737] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1810974339
[ 1.894780] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.903996] UBI: background thread "ubi_bgt0d" started, PID 1085
[ 1.904001] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.908019] ALSA device list:
[ 1.908023] No soundcards found.
[ 1.924269] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[ 1.953274] UBIFS: recovery needed
[ 2.045886] UBIFS: recovery completed
[ 2.049596] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.055518] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.064652] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.074536] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.079576] UBIFS: media format: w4/r0 (latest is w4/r0), UUID CD72815F-9A94-46DF-B863-9F8D20C2D637, small LPT model
[ 2.090863] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.097607] devtmpfs: mounted
[ 2.100711] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[ 2.933045] random: dd urandom read with 0 bits of entropy available
[ 3.367058]
[ 3.367058] bcm54xx_config_init
[ 4.427050]
[ 4.427050] bcm54xx_config_init
[ 8.427869] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.433972] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 26.006469] In axi fpga driver!
[ 26.009561] request_mem_region OK!
[ 26.012930] AXI fpga dev virtual address is 0xdf9fc000
[ 26.018060] *base_vir_addr = 0xc51e
[ 26.033353] In fpga mem driver!
[ 26.036421] request_mem_region OK!
[ 26.040045] fpga mem virtual address is 0xe2000000
[ 26.837049]
[ 26.837049] bcm54xx_config_init
[ 27.927052]
[ 27.927052] bcm54xx_config_init
[ 31.927869] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 31.933971] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f88000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d81000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 804cb4464e10481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[45] has core num=2
main.c:9113: Chain[5] ASIC[47] has core num=1
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=57 on chain[5], value=910
main.c:9183: get PIC voltage=57 on chain[6], value=910
main.c:9183: get PIC voltage=57 on chain[7], value=910
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:14741: calling the get rate, writing rate:14000
main.c:13927: bmminer not found= 1856 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
main.c:13927: bmminer not found=27974 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:56:46 CST 2019 type: Antminer S9i
mp_test_fw.c:64:check_pool_worker: No valid pools, please configure them first!
