wow nice. 4 x 140W avalon mini = 560W and 16Th. soo this is more efficient. but the price....
just did night mode.
its now 23T hast with 425W equaling 17.7J
r
rejection rate has now reduced to 13%
the best thing is that it has auto on and off , you can put at which time you want the miner to switch on and off.
However the app login for pc is very unfriendly. You have to scan the image that comes in the webpage to authenticate unlike nano3 where you could just type the ip address.
This needs to be reverted back to nano 3 version
Atleast in nano3 you dont need a smartphone but for mini 3 and maybe nano 3s you need a smartphone.
I already have a nano 3 also. Working since nov 16 hours a day med mode doing solo mining BCH. I will first do pool mining with mini 3 then maybe change to solo for BTC or BCH.
The thing is very heavy. If it trips then it has auto cutoff power . They provide 2 power cords also. Heavy 220v power cord with circuit breaker and 120V power cord with no inbuilt circuit breaker.
the 220v/120v power cord is rated 10amps. I had to order seperate cord as the points are not compatible. i am using 220v.
good thing i had ordered extra eterhnet wire, ej45 adapter, L shaped power cord before.
ALSO i am usinga fridge stabiliser to control erratic voltage wich happens rarely. its rated max 4amps so with 220v*4=920W max capability. 80% rule is 736w. I am using in medium mode. Can you guys give feedback on this?
ping hovers betwwen 68-95ms wired mode .is this good and good for solo mode? this is the best pool that i found which is closest to my country. But my Wi-Fi nano 3 original gives me 104ms
I think the miner is kaput.i had switched off my miner in night and switched on again . It shows 0 Tera hash but is connected to ip . The app gives error when I try to change mining mode .
Contacted Avalon support but this is a very bad experience . Paid 1100$ for this . Will try the reset button.After pressing the reset button it is now working . I us to. Jangle the mining mode via the heater touch button.
I changed the pool from mining Dutch to via btc . Ping went from 69 to 148 as there are no servers in my country unlike mining Dutch.
Now i am getting 0 errors. Till now as of writing 292 accepted. 0 rejected.
Canaan really needs to fix the app as it requires to scan via app to login to your miner local ip. Very regressive.
Can any one tell me what mode of pool mining is best. Using pps+
Getting 29.80t at 544watts. Rpm is 980-1008.
The timer settings are very glitchy . Apparently you canT change the on and off in real time , you first have to set the on and off time when it is disabled and then you enable it.
Very very very quiet.
A question . I am thinking of using an ups . Which minimum va ups should I buy. 1000va or 1500va. I won’t use in high mode only medium mode aka 550w. Want to save money in ups.
[moderator's note: consecutive posts merged]