S17+ - Braiins and flash to nand - error: Found argument 'config'

[JessieJames13]

I can successfully run braiinsOS with the SD card in my s17+.
When I navigate to http://192.168.1.24/cgi-bin/luci/admin/system/nandinstall and select Perform installation:
the below error occurs.

Installation of Current System to Device (NAND)

Code:

Executing command: miner nand_install
Extracting upgrade files...
Running stage1 upgrade script...
Restoring configuration from NAND...
error: Found argument 'config' which wasn't expected, or isn't valid in this context

USAGE:
    bosminer [FLAGS] [OPTIONS] [SUBCOMMAND]

For more information try --help
Failed to parse message data
Upgrade stage1 failed
Process return code was 1

BraiinsOS has given problems on every miner I tried to install... Its feels like its an incomplete product.
How to solve this issue? If I remove the SD card then the OS reboots back to bitmain.

I dont want to buy 15 SD cards to run braiins... i would rather go to VNISH or HIVE.

[JessieJames13]

Can anybody recommend any other alternative OS than Braiins?

I cant use bitmain official as the voltages on the hashboards to not match

[BitMaxz]

Have you tried to burn it again with different software? If you used balena try it with rufus.

If it doesn't work try enable ssh then try it again.
To enable it read the guide from this link below

- https://academy.braiins.com/ru/braiins-os/faqs/troubleshooting/#ssh-connection-does-not-work-in-braiins-os

If still doesn't work try to burn the other firmware from this link below.

- https://feeds.braiins-os.com/23.01/

I don't know which one is the nand firmware so try both of them "SD and SD-install".

For other firmware check awesomeminer below.

- https://www.awesomeminer.com/antminerfirmware