S19 - Updated firmware and now it wont mine

massivegoatdynamic (OP)

Newbie

Offline

Activity: 31
Merit: 0

S19 - Updated firmware and now it wont mine

January 24, 2025, 02:31:07 PM

Is there a website I could feed the log of the miner to figure out what went wrong? I got a new to me S19 miner and wanted to update the firmware to get the low power mode and now its not hashing. The GUI shows everything is green, but there is a fault light on the miner. I have tried the reset button, booting from a microSD card and nada.

The miner was working just fine before I goofed with the firmware. I do have some old S17's that apparently use the same control board...if that's the issue perhaps I could swap them..?

Code:

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209652K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19724K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6652K (cd47b000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 6/2, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 36, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 8/5, WL threshold: 4096, image sequence number: 3073590816
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 0847FD93-343E-4845-8246-2EB76614DFED, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Tue Nov 16 19:22:45 CST 2021 type: Antminer S19
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Tue Nov 16 19:22:45 CST 2021 type: Antminer S19
1970-01-01 00:00:10 commit version: 386747fa 2021-10-21 19:58:45, build by: jenkins 2021-11-16 19:40:24
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBS1902 conf
1970-01-01 00:00:10 machine : NBS1902 
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
1970-01-01 00:00:16 miner ID : 813464093efaa854
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 	chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 	chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 	chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
2025-01-23 02:40:43 [chain 0]
2025-01-23 02:40:43 0x0000 04 11 49 07 CF 33 9B B1   E3 26 1F 01 DA E7 A5 D4 
2025-01-23 02:40:43 0x0010 F0 0E C3 9E F9 09 B5 B9   6A AC 7D 9F 98 70 5B 99 
2025-01-23 02:40:43 0x0020 DD 21 6E A7 B7 26 E8 A4   76 3A 05 14 C8 14 44 35 
2025-01-23 02:40:43 0x0030 A0 AC B0 4B 6A 9F 51 51   D2 17 A5 99 1C 4B A6 BA 
2025-01-23 02:40:43 0x0040 E0 48 17 D8 5E B9 1D 63   59 E3 E8 83 81 04 04 ED 
2025-01-23 02:40:43 0x0050 9D CB A9 42 CE 00 9E A2   57 D4 AB B1 17 BC 52 97 
2025-01-23 02:40:43 0x0060 41 E0 55 6B 62 FB 50 06   50 1A 1A FD F1 4C 0D B5 
2025-01-23 02:40:43 0x0070 C3 E0 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:43 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:43 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:43 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:43 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:43 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:43 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:43 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:43 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2025-01-23 02:40:43 
2025-01-23 02:40:43 EEPROM info error!, -2
2025-01-23 02:40:43 Data decode fail for chain 0.
2025-01-23 02:40:45 [chain 0]
2025-01-23 02:40:45 0x0000 04 11 49 07 CF 33 9B B1   E3 26 1F 01 DA E7 A5 D4 
2025-01-23 02:40:45 0x0010 F0 0E C3 9E F9 09 B5 B9   6A AC 7D 9F 98 70 5B 99 
2025-01-23 02:40:45 0x0020 DD 21 6E A7 B7 26 E8 A4   76 3A 05 14 C8 14 44 35 
2025-01-23 02:40:45 0x0030 A0 AC B0 4B 6A 9F 51 51   D2 17 A5 99 1C 4B A6 BA 
2025-01-23 02:40:45 0x0040 E0 48 17 D8 5E B9 1D 63   59 E3 E8 83 81 04 04 ED 
2025-01-23 02:40:45 0x0050 9D CB A9 42 CE 00 9E A2   57 D4 AB B1 17 BC 52 97 
2025-01-23 02:40:45 0x0060 41 E0 55 6B 62 FB 50 06   50 1A 1A FD F1 4C 0D B5 
2025-01-23 02:40:45 0x0070 C3 E0 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:45 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:45 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:45 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:45 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:45 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:45 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:45 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:45 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2025-01-23 02:40:45 
2025-01-23 02:40:45 EEPROM info error!, -2
2025-01-23 02:40:45 Data decode fail for chain 0.
2025-01-23 02:40:48 [chain 0]
2025-01-23 02:40:48 0x0000 04 11 49 07 CF 33 9B B1   E3 26 1F 01 DA E7 A5 D4 
2025-01-23 02:40:48 0x0010 F0 0E C3 9E F9 09 B5 B9   6A AC 7D 9F 98 70 5B 99 
2025-01-23 02:40:48 0x0020 DD 21 6E A7 B7 26 E8 A4   76 3A 05 14 C8 14 44 35 
2025-01-23 02:40:48 0x0030 A0 AC B0 4B 6A 9F 51 51   D2 17 A5 99 1C 4B A6 BA 
2025-01-23 02:40:48 0x0040 E0 48 17 D8 5E B9 1D 63   59 E3 E8 83 81 04 04 ED 
2025-01-23 02:40:48 0x0050 9D CB A9 42 CE 00 9E A2   57 D4 AB B1 17 BC 52 97 
2025-01-23 02:40:48 0x0060 41 E0 55 6B 62 FB 50 06   50 1A 1A FD F1 4C 0D B5 
2025-01-23 02:40:48 0x0070 C3 E0 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:48 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:48 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:48 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:48 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:48 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:48 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:48 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:48 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2025-01-23 02:40:48 
2025-01-23 02:40:48 EEPROM info error!, -2
2025-01-23 02:40:48 Data decode fail for chain 0.
2025-01-23 02:40:48 Data load fail for chain 0.
2025-01-23 02:40:50 [chain 1]
2025-01-23 02:40:50 0x0000 04 11 3E B3 D2 3E 75 65   64 66 E8 08 02 EF 5F E6 
2025-01-23 02:40:50 0x0010 6E 74 5B 0E DA 86 CB BC   FF 96 D0 0F 80 9F B2 EB 
2025-01-23 02:40:50 0x0020 0F 93 FD BC D9 74 1D 48   CE 79 84 50 7B 38 B8 F2 
2025-01-23 02:40:50 0x0030 DC 36 C4 1A 6F F9 F6 BD   7E 74 DB 93 C4 96 25 FE 
2025-01-23 02:40:50 0x0040 C5 E4 3D B6 3B 32 B1 5D   A3 1F C7 55 35 46 DE DC 
2025-01-23 02:40:50 0x0050 31 F7 60 5B 36 0E 3A 34   87 72 29 9F F4 07 53 E9 
2025-01-23 02:40:50 0x0060 76 9D D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-01-23 02:40:50 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:50 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:50 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:50 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:50 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:50 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:50 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:50 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:50 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2025-01-23 02:40:50 
2025-01-23 02:40:50 EEPROM info error!, -2
2025-01-23 02:40:50 Data decode fail for chain 1.
2025-01-23 02:40:52 [chain 1]
2025-01-23 02:40:52 0x0000 04 11 3E B3 D2 3E 75 65   64 66 E8 08 02 EF 5F E6 
2025-01-23 02:40:52 0x0010 6E 74 5B 0E DA 86 CB BC   FF 96 D0 0F 80 9F B2 EB 
2025-01-23 02:40:52 0x0020 0F 93 FD BC D9 74 1D 48   CE 79 84 50 7B 38 B8 F2 
2025-01-23 02:40:52 0x0030 DC 36 C4 1A 6F F9 F6 BD   7E 74 DB 93 C4 96 25 FE 
2025-01-23 02:40:52 0x0040 C5 E4 3D B6 3B 32 B1 5D   A3 1F C7 55 35 46 DE DC 
2025-01-23 02:40:52 0x0050 31 F7 60 5B 36 0E 3A 34   87 72 29 9F F4 07 53 E9 
2025-01-23 02:40:52 0x0060 76 9D D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-01-23 02:40:52 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:52 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:52 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:52 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:52 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:52 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:52 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:52 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:52 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2025-01-23 02:40:52 
2025-01-23 02:40:52 EEPROM info error!, -2
2025-01-23 02:40:52 Data decode fail for chain 1.
2025-01-23 02:40:54 [chain 1]
2025-01-23 02:40:54 0x0000 04 11 3E B3 D2 3E 75 65   64 66 E8 08 02 EF 5F E6 
2025-01-23 02:40:54 0x0010 6E 74 5B 0E DA 86 CB BC   FF 96 D0 0F 80 9F B2 EB 
2025-01-23 02:40:54 0x0020 0F 93 FD BC D9 74 1D 48   CE 79 84 50 7B 38 B8 F2 
2025-01-23 02:40:54 0x0030 DC 36 C4 1A 6F F9 F6 BD   7E 74 DB 93 C4 96 25 FE 
2025-01-23 02:40:54 0x0040 C5 E4 3D B6 3B 32 B1 5D   A3 1F C7 55 35 46 DE DC 
2025-01-23 02:40:54 0x0050 31 F7 60 5B 36 0E 3A 34   87 72 29 9F F4 07 53 E9 
2025-01-23 02:40:54 0x0060 76 9D D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-01-23 02:40:54 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:54 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:54 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:54 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:54 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:54 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:54 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:54 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:54 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2025-01-23 02:40:54 
2025-01-23 02:40:54 EEPROM info error!, -2
2025-01-23 02:40:54 Data decode fail for chain 1.
2025-01-23 02:40:55 Data load fail for chain 1.
2025-01-23 02:40:57 [chain 2]
2025-01-23 02:40:57 0x0000 04 11 24 22 FA FE 19 78   E7 40 E9 E8 0E 4E A3 F3 
2025-01-23 02:40:57 0x0010 75 75 38 53 5E F2 94 42   CE E9 AA EF 03 0D 47 1C 
2025-01-23 02:40:57 0x0020 4F BA 1E D7 D2 0E DA 82   FC 24 C3 77 CA 4E D1 AF 
2025-01-23 02:40:57 0x0030 FE 35 BD D0 4B A6 E4 A6   5F 72 C7 B0 E7 5E C6 8C 
2025-01-23 02:40:57 0x0040 4C A3 01 E1 E0 7D D7 ED   AE 8A 68 4C 28 68 BA 44 
2025-01-23 02:40:57 0x0050 CB 6F 02 67 47 6B 57 5E   81 CF D5 80 F1 28 07 6A 
2025-01-23 02:40:57 0x0060 2B 80 D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-01-23 02:40:57 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:57 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:57 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:57 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:57 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:57 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:57 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:57 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:57 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2025-01-23 02:40:57 
2025-01-23 02:40:57 EEPROM info error!, -2
2025-01-23 02:40:57 Data decode fail for chain 2.
2025-01-23 02:40:59 [chain 2]
2025-01-23 02:40:59 0x0000 04 11 24 22 FA FE 19 78   E7 40 E9 E8 0E 4E A3 F3 
2025-01-23 02:40:59 0x0010 75 75 38 53 5E F2 94 42   CE E9 AA EF 03 0D 47 1C 
2025-01-23 02:40:59 0x0020 4F BA 1E D7 D2 0E DA 82   FC 24 C3 77 CA 4E D1 AF 
2025-01-23 02:40:59 0x0030 FE 35 BD D0 4B A6 E4 A6   5F 72 C7 B0 E7 5E C6 8C 
2025-01-23 02:40:59 0x0040 4C A3 01 E1 E0 7D D7 ED   AE 8A 68 4C 28 68 BA 44 
2025-01-23 02:40:59 0x0050 CB 6F 02 67 47 6B 57 5E   81 CF D5 80 F1 28 07 6A 
2025-01-23 02:40:59 0x0060 2B 80 D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-01-23 02:40:59 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:59 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:59 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:59 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:59 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:59 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:59 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:59 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:40:59 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2025-01-23 02:40:59 
2025-01-23 02:40:59 EEPROM info error!, -2
2025-01-23 02:40:59 Data decode fail for chain 2.
2025-01-23 02:41:01 [chain 2]
2025-01-23 02:41:01 0x0000 04 11 24 22 FA FE 19 78   E7 40 E9 E8 0E 4E A3 F3 
2025-01-23 02:41:01 0x0010 75 75 38 53 5E F2 94 42   CE E9 AA EF 03 0D 47 1C 
2025-01-23 02:41:01 0x0020 4F BA 1E D7 D2 0E DA 82   FC 24 C3 77 CA 4E D1 AF 
2025-01-23 02:41:01 0x0030 FE 35 BD D0 4B A6 E4 A6   5F 72 C7 B0 E7 5E C6 8C 
2025-01-23 02:41:01 0x0040 4C A3 01 E1 E0 7D D7 ED   AE 8A 68 4C 28 68 BA 44 
2025-01-23 02:41:01 0x0050 CB 6F 02 67 47 6B 57 5E   81 CF D5 80 F1 28 07 6A 
2025-01-23 02:41:01 0x0060 2B 80 D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-01-23 02:41:01 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:41:01 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:41:01 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:41:01 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:41:01 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:41:01 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:41:01 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:41:01 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-01-23 02:41:01 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2025-01-23 02:41:01 
2025-01-23 02:41:01 EEPROM info error!, -2
2025-01-23 02:41:01 Data decode fail for chain 2.
2025-01-23 02:41:02 Data load fail for chain 2.
2025-01-23 02:41:02 Sweep error string = J255:4.
2025-01-23 02:41:02 Fixture data load failed, exit.
2025-01-23 02:41:02 fan_eft : 0  fan_pwm : 100
2025-01-23 02:41:02 create thread
2025-01-23 02:41:02 fixed working voltage = -1
2025-01-23 02:41:02 No pcb version, chain = 0.
2025-01-23 02:41:02 Chain [0] PCB Version: 0xffff
2025-01-23 02:41:02 No bom version, chain = 0.
2025-01-23 02:41:02 Chain [0] BOM Version: 0xffff
2025-01-23 02:41:02 No pcb version, chain = 1.
2025-01-23 02:41:02 Chain [1] PCB Version: 0xffff
2025-01-23 02:41:02 No bom version, chain = 1.
2025-01-23 02:41:02 Chain [1] BOM Version: 0xffff
2025-01-23 02:41:02 No pcb version, chain = 2.
2025-01-23 02:41:02 Chain [2] PCB Version: 0xffff
2025-01-23 02:41:02 No bom version, chain = 2.
2025-01-23 02:41:02 Chain [2] BOM Version: 0xffff
2025-01-23 02:41:02 No hash board sn, chain = 0.
2025-01-23 02:41:02 No chip bin, chain = 0
2025-01-23 02:41:02 No ft ver, chain = 0
2025-01-23 02:41:02 No test standard, chain = 0.
2025-01-23 02:41:02 No hash board sn, chain = 1.
2025-01-23 02:41:02 No chip bin, chain = 1
2025-01-23 02:41:02 No ft ver, chain = 1
2025-01-23 02:41:02 No test standard, chain = 1.
2025-01-23 02:41:02 No hash board sn, chain = 2.
2025-01-23 02:41:02 No chip bin, chain = 2
2025-01-23 02:41:02 No ft ver, chain = 2
2025-01-23 02:41:02 No test standard, chain = 2.
2025-01-23 02:41:03 No hash board sn, chain = 0.
2025-01-23 02:41:03 No chip bin, chain = 0
2025-01-23 02:41:03 No ft ver, chain = 0
2025-01-23 02:41:03 No test standard, chain = 0.
2025-01-23 02:41:03 No hash board sn, chain = 1.
2025-01-23 02:41:03 No chip bin, chain = 1
2025-01-23 02:41:03 No ft ver, chain = 1
2025-01-23 02:41:03 No test standard, chain = 1.
2025-01-23 02:41:03 No hash board sn, chain = 2.
2025-01-23 02:41:03 No chip bin, chain = 2
2025-01-23 02:41:03 No ft ver, chain = 2
2025-01-23 02:41:03 No test standard, chain = 2.
2025-01-23 02:41:04 Fan check passed.
2025-01-23 02:41:04 No hash board sn, chain = 0.
2025-01-23 02:41:04 No chip bin, chain = 0
2025-01-23 02:41:04 No ft ver, chain = 0
2025-01-23 02:41:04 No test standard, chain = 0.
2025-01-23 02:41:04 No hash board sn, chain = 1.
2025-01-23 02:41:04 No chip bin, chain = 1
2025-01-23 02:41:04 No ft ver, chain = 1
2025-01-23 02:41:04 No test standard, chain = 1.
2025-01-23 02:41:04 No hash board sn, chain = 2.
2025-01-23 02:41:04 No chip bin, chain = 2
2025-01-23 02:41:04 No ft ver, chain = 2
2025-01-23 02:41:04 No test standard, chain = 2.
2025-01-23 02:41:05 chain[0] PIC jump to app
2025-01-23 02:41:05 No hash board sn, chain = 0.
2025-01-23 02:41:05 No chip bin, chain = 0
2025-01-23 02:41:05 No ft ver, chain = 0
2025-01-23 02:41:05 No test standard, chain = 0.
2025-01-23 02:41:05 No hash board sn, chain = 1.
2025-01-23 02:41:05 No chip bin, chain = 1
2025-01-23 02:41:05 No ft ver, chain = 1
2025-01-23 02:41:05 No test standard, chain = 1.
2025-01-23 02:41:05 No hash board sn, chain = 2.
2025-01-23 02:41:05 No chip bin, chain = 2
2025-01-23 02:41:05 No ft ver, chain = 2
2025-01-23 02:41:05 No test standard, chain = 2.
2025-01-23 02:41:06 No hash board sn, chain = 0.
2025-01-23 02:41:06 No chip bin, chain = 0
2025-01-23 02:41:06 No ft ver, chain = 0
2025-01-23 02:41:06 No test standard, chain = 0.
2025-01-23 02:41:06 No hash board sn, chain = 1.
2025-01-23 02:41:06 No chip bin, chain = 1
2025-01-23 02:41:06 No ft ver, chain = 1
2025-01-23 02:41:06 No test standard, chain = 1.
2025-01-23 02:41:06 No hash board sn, chain = 2.
2025-01-23 02:41:06 No chip bin, chain = 2
2025-01-23 02:41:06 No ft ver, chain = 2
2025-01-23 02:41:06 No test standard, chain = 2.
2025-01-23 02:41:06 Check chain[0] PIC fw version=0x89
2025-01-23 02:41:07 No hash board sn, chain = 0.
2025-01-23 02:41:07 No chip bin, chain = 0
2025-01-23 02:41:07 No ft ver, chain = 0
2025-01-23 02:41:07 No test standard, chain = 0.
2025-01-23 02:41:07 No hash board sn, chain = 1.
2025-01-23 02:41:07 No chip bin, chain = 1
2025-01-23 02:41:07 No ft ver, chain = 1
2025-01-23 02:41:07 No test standard, chain = 1.
2025-01-23 02:41:07 No hash board sn, chain = 2.
2025-01-23 02:41:07 No chip bin, chain = 2
2025-01-23 02:41:07 No ft ver, chain = 2
2025-01-23 02:41:07 No test standard, chain = 2.
2025-01-23 02:41:07 chain[1] PIC jump to app
2025-01-23 02:41:08 No hash board sn, chain = 0.
2025-01-23 02:41:08 No chip bin, chain = 0
2025-01-23 02:41:08 No ft ver, chain = 0
2025-01-23 02:41:08 No test standard, chain = 0.
2025-01-23 02:41:08 No hash board sn, chain = 1.
2025-01-23 02:41:08 No chip bin, chain = 1
2025-01-23 02:41:08 No ft ver, chain = 1
2025-01-23 02:41:08 No test standard, chain = 1.
2025-01-23 02:41:08 No hash board sn, chain = 2.
2025-01-23 02:41:08 No chip bin, chain = 2
2025-01-23 02:41:08 No ft ver, chain = 2
2025-01-23 02:41:08 No test standard, chain = 2.
2025-01-23 02:41:09 Check chain[1] PIC fw version=0x89
2025-01-23 02:41:09 No hash board sn, chain = 0.
2025-01-23 02:41:09 No chip bin, chain = 0
2025-01-23 02:41:09 No ft ver, chain = 0
2025-01-23 02:41:09 No test standard, chain = 0.
2025-01-23 02:41:09 No hash board sn, chain = 1.
2025-01-23 02:41:09 No chip bin, chain = 1
2025-01-23 02:41:09 No ft ver, chain = 1
2025-01-23 02:41:09 No test standard, chain = 1.
2025-01-23 02:41:09 No hash board sn, chain = 2.
2025-01-23 02:41:09 No chip bin, chain = 2
2025-01-23 02:41:09 No ft ver, chain = 2
2025-01-23 02:41:09 No test standard, chain = 2.
2025-01-23 02:41:09 No hash board sn, chain = 0.
2025-01-23 02:41:09 No chip bin, chain = 0
2025-01-23 02:41:09 No ft ver, chain = 0
2025-01-23 02:41:09 No test standard, chain = 0.
2025-01-23 02:41:09 No hash board sn, chain = 1.
2025-01-23 02:41:09 No chip bin, chain = 1
2025-01-23 02:41:09 No ft ver, chain = 1
2025-01-23 02:41:09 No test standard, chain = 1.
2025-01-23 02:41:09 No hash board sn, chain = 2.
2025-01-23 02:41:09 No chip bin, chain = 2
2025-01-23 02:41:09 No ft ver, chain = 2
2025-01-23 02:41:09 No test standard, chain = 2.
2025-01-23 02:41:09 No hash board sn, chain = 0.
2025-01-23 02:41:09 No chip bin, chain = 0
2025-01-23 02:41:09 No ft ver, chain = 0
2025-01-23 02:41:09 No test standard, chain = 0.
2025-01-23 02:41:09 No hash board sn, chain = 1.
2025-01-23 02:41:09 No chip bin, chain = 1
2025-01-23 02:41:09 No ft ver, chain = 1
2025-01-23 02:41:09 No test standard, chain = 1.
2025-01-23 02:41:09 No hash board sn, chain = 2.
2025-01-23 02:41:09 No chip bin, chain = 2
2025-01-23 02:41:09 No ft ver, chain = 2
2025-01-23 02:41:09 No test standard, chain = 2.
2025-01-23 02:41:10 chain[2] PIC jump to app
2025-01-23 02:41:10 No hash board sn, chain = 0.
2025-01-23 02:41:10 No chip bin, chain = 0
2025-01-23 02:41:10 No ft ver, chain = 0
2025-01-23 02:41:10 No test standard, chain = 0.
2025-01-23 02:41:10 No hash board sn, chain = 1.
2025-01-23 02:41:10 No chip bin, chain = 1
2025-01-23 02:41:10 No ft ver, chain = 1
2025-01-23 02:41:10 No test standard, chain = 1.
2025-01-23 02:41:10 No hash board sn, chain = 2.
2025-01-23 02:41:10 No chip bin, chain = 2
2025-01-23 02:41:10 No ft ver, chain = 2
2025-01-23 02:41:10 No test standard, chain = 2.
2025-01-23 02:41:11 No hash board sn, chain = 0.
2025-01-23 02:41:11 No chip bin, chain = 0
2025-01-23 02:41:11 No ft ver, chain = 0
2025-01-23 02:41:11 No test standard, chain = 0.
2025-01-23 02:41:11 No hash board sn, chain = 1.
2025-01-23 02:41:11 No chip bin, chain = 1
2025-01-23 02:41:11 No ft ver, chain = 1
2025-01-23 02:41:11 No test standard, chain = 1.
2025-01-23 02:41:11 No hash board sn, chain = 2.
2025-01-23 02:41:11 No chip bin, chain = 2
2025-01-23 02:41:11 No ft ver, chain = 2
2025-01-23 02:41:11 No test standard, chain = 2.
2025-01-23 02:41:12 Check chain[2] PIC fw version=0x89
2025-01-23 02:41:12 create thread
2025-01-23 02:41:12 max sensor num = 4
2025-01-23 02:41:12 temperature_monitor_thread start...
2025-01-23 02:41:12 No hash board sn, chain = 0.
2025-01-23 02:41:12 No chip bin, chain = 0
2025-01-23 02:41:12 No ft ver, chain = 0
2025-01-23 02:41:12 No test standard, chain = 0.
2025-01-23 02:41:12 No hash board sn, chain = 1.
2025-01-23 02:41:12 No chip bin, chain = 1
2025-01-23 02:41:12 No ft ver, chain = 1
2025-01-23 02:41:12 No test standard, chain = 1.
2025-01-23 02:41:12 No hash board sn, chain = 2.
2025-01-23 02:41:12 No chip bin, chain = 2
2025-01-23 02:41:12 No ft ver, chain = 2
2025-01-23 02:41:12 No test standard, chain = 2.
2025-01-23 02:41:13 No hash board sn, chain = 0.
2025-01-23 02:41:13 No chip bin, chain = 0
2025-01-23 02:41:13 No ft ver, chain = 0
2025-01-23 02:41:13 No test standard, chain = 0.
2025-01-23 02:41:13 No hash board sn, chain = 1.
2025-01-23 02:41:13 No chip bin, chain = 1
2025-01-23 02:41:13 No ft ver, chain = 1
2025-01-23 02:41:13 No test standard, chain = 1.
2025-01-23 02:41:13 No hash board sn, chain = 2.
2025-01-23 02:41:13 No chip bin, chain = 2
2025-01-23 02:41:13 No ft ver, chain = 2
2025-01-23 02:41:13 No test standard, chain = 2.
2025-01-23 02:41:14 No hash board sn, chain = 0.
2025-01-23 02:41:14 No chip bin, chain = 0
2025-01-23 02:41:14 No ft ver, chain = 0
2025-01-23 02:41:14 No test standard, chain = 0.
2025-01-23 02:41:14 No hash board sn, chain = 1.
2025-01-23 02:41:14 No chip bin, chain = 1
2025-01-23 02:41:14 No ft ver, chain = 1
2025-01-23 02:41:14 No test standard, chain = 1.
2025-01-23 02:41:14 No hash board sn, chain = 2.
2025-01-23 02:41:14 No chip bin, chain = 2
2025-01-23 02:41:14 No ft ver, chain = 2
2025-01-23 02:41:14 No test standard, chain = 2.
2025-01-23 02:41:14 No hash board sn, chain = 0.
2025-01-23 02:41:14 No chip bin, chain = 0
2025-01-23 02:41:14 No ft ver, chain = 0
2025-01-23 02:41:14 No test standard, chain = 0.
2025-01-23 02:41:14 No hash board sn, chain = 1.
2025-01-23 02:41:14 No chip bin, chain = 1
2025-01-23 02:41:14 No ft ver, chain = 1
2025-01-23 02:41:14 No test standard, chain = 1.
2025-01-23 02:41:14 No hash board sn, chain = 2.
2025-01-23 02:41:14 No chip bin, chain = 2
2025-01-23 02:41:14 No ft ver, chain = 2
2025-01-23 02:41:14 No test standard, chain = 2.
2025-01-23 02:41:14 No hash board sn, chain = 0.
2025-01-23 02:41:14 No chip bin, chain = 0
2025-01-23 02:41:14 No ft ver, chain = 0
2025-01-23 02:41:14 No test standard, chain = 0.
2025-01-23 02:41:14 No hash board sn, chain = 1.
2025-01-23 02:41:14 No chip bin, chain = 1
2025-01-23 02:41:14 No ft ver, chain = 1
2025-01-23 02:41:14 No test standard, chain = 1.
2025-01-23 02:41:14 No hash board sn, chain = 2.
2025-01-23 02:41:14 No chip bin, chain = 2
2025-01-23 02:41:14 No ft ver, chain = 2
2025-01-23 02:41:14 No test standard, chain = 2.
2025-01-23 02:41:15 No hash board sn, chain = 0.
2025-01-23 02:41:15 No chip bin, chain = 0
2025-01-23 02:41:15 No ft ver, chain = 0
2025-01-23 02:41:15 No test standard, chain = 0.
2025-01-23 02:41:15 No hash board sn, chain = 1.
2025-01-23 02:41:15 No chip bin, chain = 1
2025-01-23 02:41:15 No ft ver, chain = 1
2025-01-23 02:41:15 No test standard, chain = 1.
2025-01-23 02:41:15 No hash board sn, chain = 2.
2025-01-23 02:41:15 No chip bin, chain = 2
2025-01-23 02:41:15 No ft ver, chain = 2
2025-01-23 02:41:15 No test standard, chain = 2.
2025-01-23 02:41:16 power type version: 0x0073
2025-01-23 02:41:16 power type version error
2025-01-23 02:41:16 Sweep error string = V:1.
2025-01-23 02:41:16 ERROR_POWER_LOST: get power type version failed!
2025-01-23 02:41:16 stop_mining: get power type version failed!
2025-01-23 02:41:16 uninit_temp_info
2025-01-23 02:41:16 do not read temp anymore...
2025-01-23 02:41:16 cancel thread
2025-01-23 02:41:16 cancel thread
2025-01-23 02:41:16 ****power off hashboard****
2025-01-23 02:41:16 No hash board sn, chain = 0.
2025-01-23 02:41:16 No chip bin, chain = 0
2025-01-23 02:41:16 No ft ver, chain = 0
2025-01-23 02:41:16 No test standard, chain = 0.
2025-01-23 02:41:16 No hash board sn, chain = 1.
2025-01-23 02:41:16 No chip bin, chain = 1
2025-01-23 02:41:16 No ft ver, chain = 1
2025-01-23 02:41:16 No test standard, chain = 1.
2025-01-23 02:41:16 No hash board sn, chain = 2.
2025-01-23 02:41:16 No chip bin, chain = 2
2025-01-23 02:41:16 No ft ver, chain = 2
2025-01-23 02:41:16 No test standard, chain = 2.
2025-01-23 02:41:17 No hash board sn, chain = 0.
2025-01-23 02:41:17 No chip bin, chain = 0
2025-01-23 02:41:17 No ft ver, chain = 0
2025-01-23 02:41:17 No test standard, chain = 0.
2025-01-23 02:41:17 No hash board sn, chain = 1.
2025-01-23 02:41:17 No chip bin, chain = 1
2025-01-23 02:41:17 No ft ver, chain = 1
2025-01-23 02:41:17 No test standard, chain = 1.
2025-01-23 02:41:17 No hash board sn, chain = 2.
2025-01-23 02:41:17 No chip bin, chain = 2
2025-01-23 02:41:17 No ft ver, chain = 2
2025-01-23 02:41:17 No test standard, chain = 2.
2025-01-23 02:41:17 No hash board sn, chain = 0.
2025-01-23 02:41:17 No chip bin, chain = 0
2025-01-23 02:41:17 No ft ver, chain = 0
2025-01-23 02:41:17 No test standard, chain = 0.
2025-01-23 02:41:17 No hash board sn, chain = 1.
2025-01-23 02:41:17 No chip bin, chain = 1
2025-01-23 02:41:17 No ft ver, chain = 1
2025-01-23 02:41:17 No test standard, chain = 1.
2025-01-23 02:41:17 No hash board sn, chain = 2.
2025-01-23 02:41:17 No chip bin, chain = 2
2025-01-23 02:41:17 No ft ver, chain = 2
2025-01-23 02:41:17 No test standard, chain = 2.
2025-01-23 02:41:18 ERROR_SOC_INIT: soc init failed!
2025-01-23 02:41:18 stop_mining: soc init failed!
2025-01-23 02:41:18 ****power off hashboard****
2025-01-23 02:41:18 start to init...
2025-01-23 02:41:18 Version num 8
2025-01-23 02:41:18 Mask num 0xe000
2025-01-23 02:41:18 Note: addrInterval or corenum is not initialized.
2025-01-23 02:41:20 STATUS_OKAY
2025-01-23 02:41:20 set_start_time_point total_tv_start_sys=57 total_tv_end_sys=58
2025-01-23 02:41:21 temp monitor thread exit
2025-01-23 02:41:33 No hash board sn, chain = 0.
2025-01-23 02:41:33 No chip bin, chain = 0
2025-01-23 02:41:33 No ft ver, chain = 0
2025-01-23 02:41:33 No test standard, chain = 0.
2025-01-23 02:41:33 No hash board sn, chain = 1.
2025-01-23 02:41:33 No chip bin, chain = 1
2025-01-23 02:41:33 No ft ver, chain = 1
2025-01-23 02:41:33 No test standard, chain = 1.
2025-01-23 02:41:33 No hash board sn, chain = 2.
2025-01-23 02:41:33 No chip bin, chain = 2
2025-01-23 02:41:33 No ft ver, chain = 2
2025-01-23 02:41:33 No test standard, chain = 2.

BitMaxz

Legendary

Offline

Activity: 3920
Merit: 3564

Are we in consolidation phase?

Re: S19 - Updated firmware and now it wont mine

January 24, 2025, 03:16:07 PM

Merited by philipma1957 (1)

If it worked before you flashed the unit, you did something wrong. What I think is you maybe disconnected the power during flashing; that's why it turns out the program was corrupted, but it shows an EEPROM error.

Would you mind trying to reflash the unit again? What firmware version are you trying to flash?

If reflashing didn't fix your issue, would you mind trying to flash it through an SD card?
Here's the SD firmware from here: https://www.zeusbtc.com/firmware-download/details/4878-sd-card-firmware-download-for-antminer-19-series

▄▄███▄▄
▄▄███████████▄▄
▄██████████████████▄
▄█████▀▀▀█████▀▀▀█████▄
████▌░░░░░░░░░░░░░▐████
████▌░░░░░░░░░░░░░▐████
████▀░░░▄▄░░░▄▄░░░▀████
████░░░██▀░░░▀██░░░████
████▄░░░░░▀█▀░░░░░▄████
▀█████▄▄▄▄▄▄▄▄▄▄▄█████▀
▀██████████████████▀
▀▀███████████▀▀
▀▀███▀▀

.
betpanda.io

│

ANONYMOUS & INSTANT
.......ONLINE CASINO.......

│

▄███████████████████████▄
█████████████████████████
█████████████████████████
████████▀▀▀▀▀▀███████████
████▀▀▀█░▀▀░░░░░░▄███████
████░▄▄█▄▄▀█▄░░░█▄░▄█████
████▀██▀░▄█▀░░░█▀░░██████
██████░░▄▀░░░░▐░░░▐█▄████
██████▄▄█░▀▀░░░█▄▄▄██████
█████████████████████████
█████████████████████████
█████████████████████████
▀███████████████████████▀

▄███████████████████████▄
█████████████████████████
██████████▀░░░▀██████████
█████████░░░░░░░█████████
████████░░░░░░░░░████████
████████░░░░░░░░░████████
█████████▄░░░░░▄█████████
███████▀▀▀█▄▄▄█▀▀▀███████
██████░░░░▄░▄░▄░░░░██████
██████░░░░█▀█▀█░░░░██████
██████░░░░░░░░░░░░░██████
█████████████████████████
▀███████████████████████▀

▄███████████████████████▄
█████████████████████████
██████████▀▀▀▀▀▀█████████
███████▀▀░░░░░░░░░███████
██████▀░░░░░░░░░░░░▀█████
██████░░░░░░░░░░░░░░▀████
██████▄░░░░░░▄▄░░░░░░████
████▀▀▀▀▀░░░█░░█░░░░░████
████░▀░▀░░░░░▀▀░░░░░█████
████░▀░▀▄░░░░░░▄▄▄▄██████
█████░▀░█████████████████
█████████████████████████
▀███████████████████████▀

SLOT GAMES
....SPORTS....
LIVE CASINO

│

▄░░▄█▄░░▄
▀█▀░▄▀▄░▀█▀
▄▄▄▄▄▄▄▄▄▄▄
█████████████
█░░░░░░░░░░░█
█████████████
▄▀▄██▀▄▄▄▄▄███▄▀▄
▄▀▄██▄███▄█▄██▄▀▄
▄▀▄█▐▐▌███▐▐▌█▄▀▄
▄▀▄██▀█████▀██▄▀▄
▄▀▄█████▀▄████▄▀▄
▀▄▀▄▀█████▀▄▀▄▀
▀▀▀▄█▀█▄▀▄▀▀

Regional Sponsor of the
Argentina National Team

philipma1957

Legendary

Offline

Activity: 4788
Merit: 11603

'The right to privacy matters'

Re: S19 - Updated firmware and now it wont mine

January 24, 2025, 03:39:47 PM

there are a shit ton of s19 models.

did you flash the right model?

s19
s19a
s19j
s19i

▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ████████████████████████████████▀██ ██████████████████████████████▀██▄█ ████████████████████████████▀██████ █████████████████████████▀█████████ ██████████████████████▀████████████ █▄██▀▀█████████████▀███████▄▄▄█████ ███▄████▀▀██████▀▀█████▄▄▀▀▀███████ █████▄▄█████▀▀█▀██████████▄████████ ████████▀▀███▄███████████▄█████████ █████████▄██▀▀▀▀███▀▀██████████████ ███████████▄▄█▀████▄███████████████ ███████████████▄▄██████████████████ AltairTech.io │ 〔 ⛏ Miners〔 ⌨ Parts〔 🖰 Accessories
_______Based in Missouri, USA._______▐__________Your One-Stop Shop for Bitcoin Mining Solutions_____________________Mining Farm Consulting__________ .
.^{🛒SHOP NOW}.

massivegoatdynamic (OP)

Newbie

Offline

Activity: 31
Merit: 0

Re: S19 - Updated firmware and now it wont mine

January 24, 2025, 03:47:51 PM

Where I think I had messed up is there was 2 different .BMU files on BITMAINS website. A 17MB file to upload before the larger file and I ended up not doing the smaller file first. But I have tried reverting back to factory defaults on the GUI and on the machine by letting it run for 2 minutes and then holding the reset button for 5 seconds.

As far as the link you provided I tried the S19 and S19J for the heck of it and same result. The sticker on the side says its a S19 90 TH

What I have been doing is sticking the microSD card in my computer and then formatting it. I then just copy and paste the files from the link you provided. Is there any other trick to that or is it normal?

When I insert the micoSD card the machine is off, i turn it on and have let it run for 5 minutes but nothing seems to happen other than the fans spooling up and down. I then turn it off and take the card out. Restart and nothing. Fans are running but nothing is happening.

BitMaxz

Legendary

Offline

Activity: 3920
Merit: 3564

Are we in consolidation phase?

Re: S19 - Updated firmware and now it wont mine

January 24, 2025, 04:38:20 PM

Quote from: massivegoatdynamic on January 24, 2025, 03:47:51 PM

It seems you did it wrong. Are the two LEDs flashing near the reset button? If it is doesn't flashing or blinking during flashing, then it isn't flashing. You might have pasted the whole folder, not the file inside the zip file?

I think you better read carefully the guide how to flash this unit from this link below.

- https://www.zeusbtc.com/articles/asic-miner-troubleshooting/3833-antminer-s19-control-board-card-flashing-firmware-tutorial

Hope it would work but if it's doesn't, I think you don't have a choice but to try with a different SD card or try it with Braiins OS.

.
betpanda.io

│

ANONYMOUS & INSTANT
.......ONLINE CASINO.......

│

SLOT GAMES
....SPORTS....
LIVE CASINO

│

Regional Sponsor of the
Argentina National Team

massivegoatdynamic (OP)

Newbie

Offline

Activity: 31
Merit: 0

Re: S19 - Updated firmware and now it wont mine

January 24, 2025, 07:10:58 PM

The lights never really flicker, they both stay on the entire time and the fan runs. I should be able to plug the microsd card in with everything hooked up right?

I will try the brains later tonight. Do you think its worth trying out a different control board?

philipma1957

Legendary

Offline

Activity: 4788
Merit: 11603

'The right to privacy matters'

Re: S19 - Updated firmware and now it wont mine

January 25, 2025, 02:47:20 AM

Quote from: massivegoatdynamic on January 24, 2025, 07:10:58 PM

mara board let me give you a link.

https://altairtech.io/product/ucb2100-ltl/

massivegoatdynamic (OP)

Newbie

Offline

Activity: 31
Merit: 0

Re: S19 - Updated firmware and now it wont mine

January 25, 2025, 10:51:57 PM

I tried both Zeus' method and Braiins and no luck. I saw online that a version 2.1 control board would work with an S19 and tried putting the firmware and Braiins on that and no luck.

BitMaxz

Legendary

Offline

Activity: 3920
Merit: 3564

Are we in consolidation phase?

Re: S19 - Updated firmware and now it wont mine

January 25, 2025, 11:30:17 PM

Quote from: massivegoatdynamic on January 25, 2025, 10:51:57 PM

I tried both Zeus' method and Braiins and no luck. I saw online that a version 2.1 control board would work with an S19 and tried putting the firmware and Braiins on that and no luck.

Are you using a branded SD card? I think the control board cant read your SD card properly, which is why there are no signs that it is flashing. If you have an extra SD card, much better try it first with a different SD card because maybe the SD card you are using has a large space. Sometimes SD cards with high capacity don't recognize; try SD cards with 2 GB or 4 GB capacity.

If it still doesn't work, your last hope is to replace it with a new control board and stay using Braiins OS.

.
betpanda.io

│

ANONYMOUS & INSTANT
.......ONLINE CASINO.......

│

SLOT GAMES
....SPORTS....
LIVE CASINO

│

Regional Sponsor of the
Argentina National Team

massivegoatdynamic (OP)

Newbie

Offline

Activity: 31
Merit: 0

Re: S19 - Updated firmware and now it wont mine

January 26, 2025, 12:19:40 AM
Last edit: May 09, 2025, 08:33:19 AM by mprep

#10

I have been using 8GB gigastone micro SD/HC cards for all of my bitmain firmware trials and I did try 3 different cards. I did load BRAIINS on a 2 gig card but I have not put the bitmain/zeus firmware on that one...its worth a shot.

Thanks for all of the replies everyone.

I am also wondering if the Bitmain 2.1 control board from the S17 wont work with an S19 but a version 3.1 board from an S19 would work with an S17....any thoughts on that?

philipma1957, I noticed that the mara board you posted from Altair does not specifically call out the S19 but the models that came out after S19.

This one has the same model number that is on my current board:

https://altairtech.io/product/bitmain-antminer-s19-s19-pro-t19-control-board/

Any idea which would be better?

Regards,

[moderator's note: consecutive posts merged]

BitMaxz

Legendary

Offline

Activity: 3920
Merit: 3564

Are we in consolidation phase?

Re: S19 - Updated firmware and now it wont mine

January 26, 2025, 02:53:01 PM

#11

Quote from: massivegoatdynamic on January 26, 2025, 12:48:09 AM

I am also wondering if the Bitmain 2.1 control board from the S17 wont work with an S19 but a version 3.1 board from an S19 would work with an S17....any thoughts on that?

If it's a Xillinx c55 control board then it will work but I think s17 uses c49 controller which is not compatible for s19. Maybe s17+ control board because ZeusBTC said they use same control board.

You can see more compatible unit model from this link below that support this control board:

- https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=375

.
betpanda.io

│

ANONYMOUS & INSTANT
.......ONLINE CASINO.......

│

SLOT GAMES
....SPORTS....
LIVE CASINO

│

Regional Sponsor of the
Argentina National Team

massivegoatdynamic (OP)

Newbie

Offline

Activity: 31
Merit: 0

Re: S19 - Updated firmware and now it wont mine

January 26, 2025, 04:18:39 PM

#12

The S19 board is C71 V3.1011

The S17 board is a C52 V2.102 so that is likely why it isn't playing nice.

2 more questions for you:

1. Have you ever had a miner that ran trouble free for a year? I have only ever messed with used ones but they all seem to die fairly quickly.
2. Have you used Zeus to train you on how to fix the miners?

philipma1957

Legendary

Offline

Activity: 4788
Merit: 11603

'The right to privacy matters'

Re: S19 - Updated firmware and now it wont mine

January 26, 2025, 07:21:36 PM

#13

Quote from: massivegoatdynamic on January 26, 2025, 04:18:39 PM

trouble free for a year no

but 99% uptime for a year yes.

mikeywith

Legendary

Offline

Activity: 2842
Merit: 7136

Privacy is not a crime.

Re: S19 - Updated firmware and now it wont mine

January 27, 2025, 08:22:47 PM

#14

Quote from: massivegoatdynamic on January 26, 2025, 04:18:39 PM

1. Have you ever had a miner that ran trouble free for a year? I have only ever messed with used ones but they all seem to die fairly quickly.
2. Have you used Zeus to train you on how to fix the miners?

Personally, after the S9s, i don't recall having a full year trouble free Antminer, had hunderds of Antminers die on me for all various reasons, in the same places/farms we had Whatsminers that ran trouble free for years.

I am talking about brand new gears, as for used gears, it is mainly luck, but again, Antminer are the most efficient gears but not the most robust.

b1exch.to

Instant Automated Exchange
.....................No Logs | No registration | No JavaScript .....................

ETH DAI BTC LTC USDT XMR

ACCESS VIA
Tor

███████████▄▀▄▀
█████████▄█▄▀
███████████
███████▄█▀

█▀█
▄▄▀░░██▄▄
▄▀██▄▀██████▄
███▄▀░▄████████
██████████░██████
█░████░██████████
█░█░█░████░██████
█░█░█░██░██████
▀▀▀▄█▄████▀▀▀

massivegoatdynamic (OP)

Newbie

Offline

Activity: 31
Merit: 0

Re: S19 - Updated firmware and now it wont mine

January 28, 2025, 04:24:35 AM
Last edit: May 09, 2025, 07:49:53 AM by mprep

#15

I ordered a new control board and it should be here Friday/Saturday. Fingers crossed the machine comes back to life.

I have never tried Whatsminers, only burner Bitmains and I have not had much luck. I am interested to see if the Block's 3nm chips ever make it into an American made miner. I think it would be neat to make those stateside but who knows if that will ever happen.

I also looked into doing training with Zeus. They seem to be reputable but the training is pretty pricey.

Assuming you fix your own gear do you mostly just watch youtube videos and/or do y'all have electronic backgrounds? How did y'all learn the art of fixing miners?

[moderator's note: consecutive posts merged]

mikeywith

Legendary

Offline

Activity: 2842
Merit: 7136

Privacy is not a crime.

Re: S19 - Updated firmware and now it wont mine

January 31, 2025, 02:01:09 AM

Merited by philipma1957 (3), BitMaxz (1)

#16

Quote from: massivegoatdynamic on January 28, 2025, 04:28:10 AM

I also looked into doing training with Zeus. They seem to be reputable but the training is pretty pricey.

ZeusBTC are trustworthy, they have done a lot to the mining community by providing dozen of free information many of which is very critical and hard to find elsewhere, as for pricing I have no clue but I suppose these things are meant for those who plan to start fixing miners as a business not for an individual who would want to fix the 5 gears they operate.

Quote

Assuming you fix your own gear do you mostly just watch youtube videos and/or do y'all have electronic backgrounds? How did y'all learn the art of fixing miners?

You will need to have a solid electronic background, dealing with tools such as soldering is not something you can learn just by watching a few videos, most people I know who can fix gears have some experience in fixing mobile phones, laptops, and whatnot, personally with my shaky hands I can hardly solder a 5cm by 5cm metal pipe, let alone a tiny chip on a tiny PCB slot. Cheesy

b1exch.to

Instant Automated Exchange
.....................No Logs | No registration | No JavaScript .....................

ETH DAI BTC LTC USDT XMR

ACCESS VIA
Tor

███████████▄▀▄▀
█████████▄█▄▀
███████████
███████▄█▀

massivegoatdynamic (OP)

Newbie

Offline

Activity: 31
Merit: 0

Re: S19 - Updated firmware and now it wont mine

February 03, 2025, 02:22:28 AM

#17

I got the new control board in and the green light turns green about 10 seconds after flashing but it still isn't hashing.

While the machine is running and the fans are spinning I measured the bus bars going to the hashboards and I couldn't register any voltage. So maybe it is the power supply and that is why it isn't working? What are the odds that both the power supply and control board both die? Or maybe it was the control board all along..?

Here is the code:

Code:

free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209568K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19808K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6736K (cd465000 - cdaf9000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  � 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 731466335
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6E0096BC-04F4-4598-A3BD-319A3E042DC5, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: empty MTD device detected
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 0, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 2318495056
ubi2: available PEBs: 104, total reserved PEBs: 8, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 739
UBIFS (ubi2:0): default file-system created
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 745
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID A8B594BC-F4AF-46C3-98DB-41F4AE8681CF, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbe4000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
1970-01-01 00:00:10 Miner compile time: Mon Jun  1 20:26:40 CST 2020 type: Antminer S19
1970-01-01 00:00:11 This is fix-freq version
1970-01-01 00:00:11 Miner compile time: Mon Jun  1 20:26:40 CST 2020 type: Antminer S19
1970-01-01 00:00:11 commit version: 2f45d4e 2020-05-25 13:33:37, build by: jenkins 2020-06-01 20:54:22
1970-01-01 00:00:11 opt_multi_version     = 1
1970-01-01 00:00:11 opt_bitmain_ab        = 1
1970-01-01 00:00:11 mid_auto_gen          = 0
1970-01-01 00:00:11 opt_bitmain_work_mode = 0
1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:11 Note: front fan is power on!
1970-01-01 00:00:11 Note: rear fan is power on!
1970-01-01 00:00:11 start the http log.
1970-01-01 00:00:11 httpListenThread start ret=0
1970-01-01 00:00:11 start listen on 6060 ...
1970-01-01 00:00:11 load machine NBS1902 conf
1970-01-01 00:00:11 machine : NBS1902 
1970-01-01 00:00:11 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
1970-01-01 00:00:17 miner ID : 806c2d8824a16854
1970-01-01 00:00:17 FPGA Version = 0xB031
1970-01-01 00:00:17 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:17 ==========================capability start==========================
1970-01-01 00:00:17 board num = 3
1970-01-01 00:00:17 board id = 0, chain num = 1
1970-01-01 00:00:17 	chain id = 0
1970-01-01 00:00:17 board id = 1, chain num = 1
1970-01-01 00:00:17 	chain id = 1
1970-01-01 00:00:17 board id = 2, chain num = 1
1970-01-01 00:00:17 	chain id = 2
1970-01-01 00:00:17 ==========================capability end============================
1970-01-01 00:00:17 chain num = 3
1970-01-01 00:00:19 [chain 0]
1970-01-01 00:00:19 0x0000 04 11 49 07 CF 33 9B B1   E3 26 1F 01 DA E7 A5 D4 
1970-01-01 00:00:19 0x0010 F0 0E C3 9E F9 09 B5 B9   6A AC 7D 9F 98 70 5B 99 
1970-01-01 00:00:19 0x0020 DD 21 6E A7 B7 26 E8 A4   76 3A 05 14 C8 14 44 35 
1970-01-01 00:00:19 0x0030 A0 AC B0 4B 6A 9F 51 51   D2 17 A5 99 1C 4B A6 BA 
1970-01-01 00:00:19 0x0040 E0 48 17 D8 5E B9 1D 63   59 E3 E8 83 81 04 04 ED 
1970-01-01 00:00:19 0x0050 9D CB A9 42 CE 00 9E A2   57 D4 AB B1 17 BC 52 97 
1970-01-01 00:00:19 0x0060 41 E0 55 6B 62 FB 50 06   50 1A 1A FD F1 4C 0D B5 
1970-01-01 00:00:19 0x0070 C3 E0 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
1970-01-01 00:00:19 
1970-01-01 00:00:19 Data decode fail for chain 0.
1970-01-01 00:00:20 [chain 0]
1970-01-01 00:00:20 0x0000 04 11 49 07 CF 33 9B B1   E3 26 1F 01 DA E7 A5 D4 
1970-01-01 00:00:20 0x0010 F0 0E C3 9E F9 09 B5 B9   6A AC 7D 9F 98 70 5B 99 
1970-01-01 00:00:20 0x0020 DD 21 6E A7 B7 26 E8 A4   76 3A 05 14 C8 14 44 35 
1970-01-01 00:00:20 0x0030 A0 AC B0 4B 6A 9F 51 51   D2 17 A5 99 1C 4B A6 BA 
1970-01-01 00:00:20 0x0040 E0 48 17 D8 5E B9 1D 63   59 E3 E8 83 81 04 04 ED 
1970-01-01 00:00:20 0x0050 9D CB A9 42 CE 00 9E A2   57 D4 AB B1 17 BC 52 97 
1970-01-01 00:00:20 0x0060 41 E0 55 6B 62 FB 50 06   50 1A 1A FD F1 4C 0D B5 
1970-01-01 00:00:20 0x0070 C3 E0 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
1970-01-01 00:00:20 
1970-01-01 00:00:20 Data decode fail for chain 0.
2025-02-03 00:18:19 [chain 0]
2025-02-03 00:18:19 0x0000 04 11 49 07 CF 33 9B B1   E3 26 1F 01 DA E7 A5 D4 
2025-02-03 00:18:19 0x0010 F0 0E C3 9E F9 09 B5 B9   6A AC 7D 9F 98 70 5B 99 
2025-02-03 00:18:19 0x0020 DD 21 6E A7 B7 26 E8 A4   76 3A 05 14 C8 14 44 35 
2025-02-03 00:18:19 0x0030 A0 AC B0 4B 6A 9F 51 51   D2 17 A5 99 1C 4B A6 BA 
2025-02-03 00:18:19 0x0040 E0 48 17 D8 5E B9 1D 63   59 E3 E8 83 81 04 04 ED 
2025-02-03 00:18:19 0x0050 9D CB A9 42 CE 00 9E A2   57 D4 AB B1 17 BC 52 97 
2025-02-03 00:18:19 0x0060 41 E0 55 6B 62 FB 50 06   50 1A 1A FD F1 4C 0D B5 
2025-02-03 00:18:19 0x0070 C3 E0 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-02-03 00:18:19 
2025-02-03 00:18:19 Data decode fail for chain 0.
2025-02-03 00:18:19 Data load fail for chain 0.
2025-02-03 00:18:20 [chain 1]
2025-02-03 00:18:20 0x0000 04 11 3E B3 D2 3E 75 65   64 66 E8 08 02 EF 5F E6 
2025-02-03 00:18:20 0x0010 6E 74 5B 0E DA 86 CB BC   FF 96 D0 0F 80 9F B2 EB 
2025-02-03 00:18:20 0x0020 0F 93 FD BC D9 74 1D 48   CE 79 84 50 7B 38 B8 F2 
2025-02-03 00:18:20 0x0030 DC 36 C4 1A 6F F9 F6 BD   7E 74 DB 93 C4 96 25 FE 
2025-02-03 00:18:20 0x0040 C5 E4 3D B6 3B 32 B1 5D   A3 1F C7 55 35 46 DE DC 
2025-02-03 00:18:20 0x0050 31 F7 60 5B 36 0E 3A 34   87 72 29 9F F4 07 53 E9 
2025-02-03 00:18:20 0x0060 76 9D D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-02-03 00:18:20 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-02-03 00:18:20 
2025-02-03 00:18:20 Data decode fail for chain 1.
2025-02-03 00:18:22 [chain 1]
2025-02-03 00:18:22 0x0000 04 11 3E B3 D2 3E 75 65   64 66 E8 08 02 EF 5F E6 
2025-02-03 00:18:22 0x0010 6E 74 5B 0E DA 86 CB BC   FF 96 D0 0F 80 9F B2 EB 
2025-02-03 00:18:22 0x0020 0F 93 FD BC D9 74 1D 48   CE 79 84 50 7B 38 B8 F2 
2025-02-03 00:18:22 0x0030 DC 36 C4 1A 6F F9 F6 BD   7E 74 DB 93 C4 96 25 FE 
2025-02-03 00:18:22 0x0040 C5 E4 3D B6 3B 32 B1 5D   A3 1F C7 55 35 46 DE DC 
2025-02-03 00:18:22 0x0050 31 F7 60 5B 36 0E 3A 34   87 72 29 9F F4 07 53 E9 
2025-02-03 00:18:22 0x0060 76 9D D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-02-03 00:18:22 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-02-03 00:18:22 
2025-02-03 00:18:22 Data decode fail for chain 1.
2025-02-03 00:18:23 [chain 1]
2025-02-03 00:18:23 0x0000 04 11 3E B3 D2 3E 75 65   64 66 E8 08 02 EF 5F E6 
2025-02-03 00:18:23 0x0010 6E 74 5B 0E DA 86 CB BC   FF 96 D0 0F 80 9F B2 EB 
2025-02-03 00:18:23 0x0020 0F 93 FD BC D9 74 1D 48   CE 79 84 50 7B 38 B8 F2 
2025-02-03 00:18:23 0x0030 DC 36 C4 1A 6F F9 F6 BD   7E 74 DB 93 C4 96 25 FE 
2025-02-03 00:18:23 0x0040 C5 E4 3D B6 3B 32 B1 5D   A3 1F C7 55 35 46 DE DC 
2025-02-03 00:18:23 0x0050 31 F7 60 5B 36 0E 3A 34   87 72 29 9F F4 07 53 E9 
2025-02-03 00:18:23 0x0060 76 9D D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-02-03 00:18:23 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-02-03 00:18:23 
2025-02-03 00:18:23 Data decode fail for chain 1.
2025-02-03 00:18:24 Data load fail for chain 1.
2025-02-03 00:18:25 [chain 2]
2025-02-03 00:18:25 0x0000 04 11 24 22 FA FE 19 78   E7 40 E9 E8 0E 4E A3 F3 
2025-02-03 00:18:25 0x0010 75 75 38 53 5E F2 94 42   CE E9 AA EF 03 0D 47 1C 
2025-02-03 00:18:25 0x0020 4F BA 1E D7 D2 0E DA 82   FC 24 C3 77 CA 4E D1 AF 
2025-02-03 00:18:25 0x0030 FE 35 BD D0 4B A6 E4 A6   5F 72 C7 B0 E7 5E C6 8C 
2025-02-03 00:18:25 0x0040 4C A3 01 E1 E0 7D D7 ED   AE 8A 68 4C 28 68 BA 44 
2025-02-03 00:18:25 0x0050 CB 6F 02 67 47 6B 57 5E   81 CF D5 80 F1 28 07 6A 
2025-02-03 00:18:25 0x0060 2B 80 D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-02-03 00:18:25 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-02-03 00:18:25 
2025-02-03 00:18:25 Data decode fail for chain 2.
2025-02-03 00:18:27 [chain 2]
2025-02-03 00:18:27 0x0000 04 11 24 22 FA FE 19 78   E7 40 E9 E8 0E 4E A3 F3 
2025-02-03 00:18:27 0x0010 75 75 38 53 5E F2 94 42   CE E9 AA EF 03 0D 47 1C 
2025-02-03 00:18:27 0x0020 4F BA 1E D7 D2 0E DA 82   FC 24 C3 77 CA 4E D1 AF 
2025-02-03 00:18:27 0x0030 FE 35 BD D0 4B A6 E4 A6   5F 72 C7 B0 E7 5E C6 8C 
2025-02-03 00:18:27 0x0040 4C A3 01 E1 E0 7D D7 ED   AE 8A 68 4C 28 68 BA 44 
2025-02-03 00:18:27 0x0050 CB 6F 02 67 47 6B 57 5E   81 CF D5 80 F1 28 07 6A 
2025-02-03 00:18:27 0x0060 2B 80 D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-02-03 00:18:27 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-02-03 00:18:27 
2025-02-03 00:18:27 Data decode fail for chain 2.
2025-02-03 00:18:28 [chain 2]
2025-02-03 00:18:28 0x0000 04 11 24 22 FA FE 19 78   E7 40 E9 E8 0E 4E A3 F3 
2025-02-03 00:18:28 0x0010 75 75 38 53 5E F2 94 42   CE E9 AA EF 03 0D 47 1C 
2025-02-03 00:18:28 0x0020 4F BA 1E D7 D2 0E DA 82   FC 24 C3 77 CA 4E D1 AF 
2025-02-03 00:18:28 0x0030 FE 35 BD D0 4B A6 E4 A6   5F 72 C7 B0 E7 5E C6 8C 
2025-02-03 00:18:28 0x0040 4C A3 01 E1 E0 7D D7 ED   AE 8A 68 4C 28 68 BA 44 
2025-02-03 00:18:28 0x0050 CB 6F 02 67 47 6B 57 5E   81 CF D5 80 F1 28 07 6A 
2025-02-03 00:18:28 0x0060 2B 80 D9 82 E0 F3 43 E3   2F 19 77 E9 B8 7E E3 47 
2025-02-03 00:18:28 0x0070 8D C6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2025-02-03 00:18:28 
2025-02-03 00:18:28 Data decode fail for chain 2.
2025-02-03 00:18:29 Data load fail for chain 2.
2025-02-03 00:18:29 Sweep error string = J255:4.
2025-02-03 00:18:29 Fixture data load failed, exit.
2025-02-03 00:18:29 fan_eft : 0  fan_pwm : 100
2025-02-03 00:18:29 create thread
2025-02-03 00:18:29 fixed working voltage = -1
2025-02-03 00:18:29 No pcb version, chain = 0.
2025-02-03 00:18:29 Chain [0] PCB Version: 0xffff
2025-02-03 00:18:29 No bom version, chain = 0.
2025-02-03 00:18:29 Chain [0] BOM Version: 0xffff
2025-02-03 00:18:29 No pcb version, chain = 1.
2025-02-03 00:18:29 Chain [1] PCB Version: 0xffff
2025-02-03 00:18:29 No bom version, chain = 1.
2025-02-03 00:18:29 Chain [1] BOM Version: 0xffff
2025-02-03 00:18:29 No pcb version, chain = 2.
2025-02-03 00:18:29 Chain [2] PCB Version: 0xffff
2025-02-03 00:18:29 No bom version, chain = 2.
2025-02-03 00:18:29 Chain [2] BOM Version: 0xffff
2025-02-03 00:18:29 No hash board sn, chain = 0.
2025-02-03 00:18:29 No chip bin, chain = 0
2025-02-03 00:18:29 No ft ver, chain = 0
2025-02-03 00:18:29 No test standard, chain = 0.
2025-02-03 00:18:29 No hash board sn, chain = 1.
2025-02-03 00:18:29 No chip bin, chain = 1
2025-02-03 00:18:29 No ft ver, chain = 1
2025-02-03 00:18:29 No test standard, chain = 1.
2025-02-03 00:18:29 No hash board sn, chain = 2.
2025-02-03 00:18:29 No chip bin, chain = 2
2025-02-03 00:18:29 No ft ver, chain = 2
2025-02-03 00:18:29 No test standard, chain = 2.
2025-02-03 00:18:30 No hash board sn, chain = 0.
2025-02-03 00:18:30 No chip bin, chain = 0
2025-02-03 00:18:30 No ft ver, chain = 0
2025-02-03 00:18:30 No test standard, chain = 0.
2025-02-03 00:18:30 No hash board sn, chain = 1.
2025-02-03 00:18:30 No chip bin, chain = 1
2025-02-03 00:18:30 No ft ver, chain = 1
2025-02-03 00:18:30 No test standard, chain = 1.
2025-02-03 00:18:30 No hash board sn, chain = 2.
2025-02-03 00:18:30 No chip bin, chain = 2
2025-02-03 00:18:30 No ft ver, chain = 2
2025-02-03 00:18:30 No test standard, chain = 2.
2025-02-03 00:18:31 Fan check passed.
2025-02-03 00:18:31 No hash board sn, chain = 0.
2025-02-03 00:18:31 No chip bin, chain = 0
2025-02-03 00:18:31 No ft ver, chain = 0
2025-02-03 00:18:31 No test standard, chain = 0.
2025-02-03 00:18:31 No hash board sn, chain = 1.
2025-02-03 00:18:31 No chip bin, chain = 1
2025-02-03 00:18:31 No ft ver, chain = 1
2025-02-03 00:18:31 No test standard, chain = 1.
2025-02-03 00:18:31 No hash board sn, chain = 2.
2025-02-03 00:18:31 No chip bin, chain = 2
2025-02-03 00:18:31 No ft ver, chain = 2
2025-02-03 00:18:31 No test standard, chain = 2.
2025-02-03 00:18:31 No hash board sn, chain = 0.
2025-02-03 00:18:31 No chip bin, chain = 0
2025-02-03 00:18:31 No ft ver, chain = 0
2025-02-03 00:18:31 No test standard, chain = 0.
2025-02-03 00:18:31 No hash board sn, chain = 1.
2025-02-03 00:18:31 No chip bin, chain = 1
2025-02-03 00:18:31 No ft ver, chain = 1
2025-02-03 00:18:31 No test standard, chain = 1.
2025-02-03 00:18:31 No hash board sn, chain = 2.
2025-02-03 00:18:31 No chip bin, chain = 2
2025-02-03 00:18:31 No ft ver, chain = 2
2025-02-03 00:18:31 No test standard, chain = 2.
2025-02-03 00:18:31 No hash board sn, chain = 0.
2025-02-03 00:18:31 No chip bin, chain = 0
2025-02-03 00:18:31 No ft ver, chain = 0
2025-02-03 00:18:31 No test standard, chain = 0.
2025-02-03 00:18:31 No hash board sn, chain = 1.
2025-02-03 00:18:31 No chip bin, chain = 1
2025-02-03 00:18:31 No ft ver, chain = 1
2025-02-03 00:18:31 No test standard, chain = 1.
2025-02-03 00:18:31 No hash board sn, chain = 2.
2025-02-03 00:18:31 No chip bin, chain = 2
2025-02-03 00:18:31 No ft ver, chain = 2
2025-02-03 00:18:31 No test standard, chain = 2.
2025-02-03 00:18:32 chain[0] PIC jump to app
2025-02-03 00:18:32 No hash board sn, chain = 0.
2025-02-03 00:18:32 No chip bin, chain = 0
2025-02-03 00:18:32 No ft ver, chain = 0
2025-02-03 00:18:32 No test standard, chain = 0.
2025-02-03 00:18:32 No hash board sn, chain = 1.
2025-02-03 00:18:32 No chip bin, chain = 1
2025-02-03 00:18:32 No ft ver, chain = 1
2025-02-03 00:18:32 No test standard, chain = 1.
2025-02-03 00:18:32 No hash board sn, chain = 2.
2025-02-03 00:18:32 No chip bin, chain = 2
2025-02-03 00:18:32 No ft ver, chain = 2
2025-02-03 00:18:32 No test standard, chain = 2.
2025-02-03 00:18:33 No hash board sn, chain = 0.
2025-02-03 00:18:33 No chip bin, chain = 0
2025-02-03 00:18:33 No ft ver, chain = 0
2025-02-03 00:18:33 No test standard, chain = 0.
2025-02-03 00:18:33 No hash board sn, chain = 1.
2025-02-03 00:18:33 No chip bin, chain = 1
2025-02-03 00:18:33 No ft ver, chain = 1
2025-02-03 00:18:33 No test standard, chain = 1.
2025-02-03 00:18:33 No hash board sn, chain = 2.
2025-02-03 00:18:33 No chip bin, chain = 2
2025-02-03 00:18:33 No ft ver, chain = 2
2025-02-03 00:18:33 No test standard, chain = 2.
2025-02-03 00:18:33 Check chain[0] PIC fw version=0x89
2025-02-03 00:18:34 No hash board sn, chain = 0.
2025-02-03 00:18:34 No chip bin, chain = 0
2025-02-03 00:18:34 No ft ver, chain = 0
2025-02-03 00:18:34 No test standard, chain = 0.
2025-02-03 00:18:34 No hash board sn, chain = 1.
2025-02-03 00:18:34 No chip bin, chain = 1
2025-02-03 00:18:34 No ft ver, chain = 1
2025-02-03 00:18:34 No test standard, chain = 1.
2025-02-03 00:18:34 No hash board sn, chain = 2.
2025-02-03 00:18:34 No chip bin, chain = 2
2025-02-03 00:18:34 No ft ver, chain = 2
2025-02-03 00:18:34 No test standard, chain = 2.
2025-02-03 00:18:34 chain[1] PIC jump to app
2025-02-03 00:18:35 No hash board sn, chain = 0.
2025-02-03 00:18:35 No chip bin, chain = 0
2025-02-03 00:18:35 No ft ver, chain = 0
2025-02-03 00:18:35 No test standard, chain = 0.
2025-02-03 00:18:35 No hash board sn, chain = 1.
2025-02-03 00:18:35 No chip bin, chain = 1
2025-02-03 00:18:35 No ft ver, chain = 1
2025-02-03 00:18:35 No test standard, chain = 1.
2025-02-03 00:18:35 No hash board sn, chain = 2.
2025-02-03 00:18:35 No chip bin, chain = 2
2025-02-03 00:18:35 No ft ver, chain = 2
2025-02-03 00:18:35 No test standard, chain = 2.
2025-02-03 00:18:36 Check chain[1] PIC fw version=0x89
2025-02-03 00:18:36 No hash board sn, chain = 0.
2025-02-03 00:18:36 No chip bin, chain = 0
2025-02-03 00:18:36 No ft ver, chain = 0
2025-02-03 00:18:36 No test standard, chain = 0.
2025-02-03 00:18:36 No hash board sn, chain = 1.
2025-02-03 00:18:36 No chip bin, chain = 1
2025-02-03 00:18:36 No ft ver, chain = 1
2025-02-03 00:18:36 No test standard, chain = 1.
2025-02-03 00:18:36 No hash board sn, chain = 2.
2025-02-03 00:18:36 No chip bin, chain = 2
2025-02-03 00:18:36 No ft ver, chain = 2
2025-02-03 00:18:36 No test standard, chain = 2.
2025-02-03 00:18:37 No hash board sn, chain = 0.
2025-02-03 00:18:37 No chip bin, chain = 0
2025-02-03 00:18:37 No ft ver, chain = 0
2025-02-03 00:18:37 No test standard, chain = 0.
2025-02-03 00:18:37 No hash board sn, chain = 1.
2025-02-03 00:18:37 No chip bin, chain = 1
2025-02-03 00:18:37 No ft ver, chain = 1
2025-02-03 00:18:37 No test standard, chain = 1.
2025-02-03 00:18:37 No hash board sn, chain = 2.
2025-02-03 00:18:37 No chip bin, chain = 2
2025-02-03 00:18:37 No ft ver, chain = 2
2025-02-03 00:18:37 chain[2] PIC jump to app
2025-02-03 00:18:37 No test standard, chain = 2.
2025-02-03 00:18:38 No hash board sn, chain = 0.
2025-02-03 00:18:38 No chip bin, chain = 0
2025-02-03 00:18:38 No ft ver, chain = 0
2025-02-03 00:18:38 No test standard, chain = 0.
2025-02-03 00:18:38 No hash board sn, chain = 1.
2025-02-03 00:18:38 No chip bin, chain = 1
2025-02-03 00:18:38 No ft ver, chain = 1
2025-02-03 00:18:38 No test standard, chain = 1.
2025-02-03 00:18:38 No hash board sn, chain = 2.
2025-02-03 00:18:38 No chip bin, chain = 2
2025-02-03 00:18:38 No ft ver, chain = 2
2025-02-03 00:18:38 No test standard, chain = 2.
2025-02-03 00:18:39 Check chain[2] PIC fw version=0x89
2025-02-03 00:18:39 create thread
2025-02-03 00:18:39 max sensor num = 4
2025-02-03 00:18:39 temperature_monitor_thread start...
2025-02-03 00:18:39 No hash board sn, chain = 0.
2025-02-03 00:18:39 No chip bin, chain = 0
2025-02-03 00:18:39 No ft ver, chain = 0
2025-02-03 00:18:39 No test standard, chain = 0.
2025-02-03 00:18:39 No hash board sn, chain = 1.
2025-02-03 00:18:39 No chip bin, chain = 1
2025-02-03 00:18:39 No ft ver, chain = 1
2025-02-03 00:18:39 No test standard, chain = 1.
2025-02-03 00:18:39 No hash board sn, chain = 2.
2025-02-03 00:18:39 No chip bin, chain = 2
2025-02-03 00:18:39 No ft ver, chain = 2
2025-02-03 00:18:39 No test standard, chain = 2.
2025-02-03 00:18:40 No hash board sn, chain = 0.
2025-02-03 00:18:40 No chip bin, chain = 0
2025-02-03 00:18:40 No ft ver, chain = 0
2025-02-03 00:18:40 No test standard, chain = 0.
2025-02-03 00:18:40 No hash board sn, chain = 1.
2025-02-03 00:18:40 No chip bin, chain = 1
2025-02-03 00:18:40 No ft ver, chain = 1
2025-02-03 00:18:40 No test standard, chain = 1.
2025-02-03 00:18:40 No hash board sn, chain = 2.
2025-02-03 00:18:40 No chip bin, chain = 2
2025-02-03 00:18:40 No ft ver, chain = 2
2025-02-03 00:18:40 No test standard, chain = 2.
2025-02-03 00:18:41 No hash board sn, chain = 0.
2025-02-03 00:18:41 No chip bin, chain = 0
2025-02-03 00:18:41 No ft ver, chain = 0
2025-02-03 00:18:41 No test standard, chain = 0.
2025-02-03 00:18:41 No hash board sn, chain = 1.
2025-02-03 00:18:41 No chip bin, chain = 1
2025-02-03 00:18:41 No ft ver, chain = 1
2025-02-03 00:18:41 No test standard, chain = 1.
2025-02-03 00:18:41 No hash board sn, chain = 2.
2025-02-03 00:18:41 No chip bin, chain = 2
2025-02-03 00:18:41 No ft ver, chain = 2
2025-02-03 00:18:41 No test standard, chain = 2.
2025-02-03 00:18:42 No hash board sn, chain = 0.
2025-02-03 00:18:42 No chip bin, chain = 0
2025-02-03 00:18:42 No ft ver, chain = 0
2025-02-03 00:18:42 No test standard, chain = 0.
2025-02-03 00:18:42 No hash board sn, chain = 1.
2025-02-03 00:18:42 No chip bin, chain = 1
2025-02-03 00:18:42 No ft ver, chain = 1
2025-02-03 00:18:42 No test standard, chain = 1.
2025-02-03 00:18:42 No hash board sn, chain = 2.
2025-02-03 00:18:42 No chip bin, chain = 2
2025-02-03 00:18:42 No ft ver, chain = 2
2025-02-03 00:18:42 No test standard, chain = 2.
2025-02-03 00:18:43 power type version: 0x0073
2025-02-03 00:18:43 power type version error
2025-02-03 00:18:43 Sweep error string = V:1.
2025-02-03 00:18:43 ERROR_POWER_LOST: get power type version failed!
2025-02-03 00:18:43 stop_mining: get power type version failed!
2025-02-03 00:18:43 uninit_temp_info
2025-02-03 00:18:43 do not read temp anymore...
2025-02-03 00:18:43 cancel thread
2025-02-03 00:18:43 cancel thread
2025-02-03 00:18:43 ****power off hashboard****
2025-02-03 00:18:43 No hash board sn, chain = 0.
2025-02-03 00:18:43 No chip bin, chain = 0
2025-02-03 00:18:43 No ft ver, chain = 0
2025-02-03 00:18:43 No test standard, chain = 0.
2025-02-03 00:18:43 No hash board sn, chain = 1.
2025-02-03 00:18:43 No chip bin, chain = 1
2025-02-03 00:18:43 No ft ver, chain = 1
2025-02-03 00:18:43 No test standard, chain = 1.
2025-02-03 00:18:43 No hash board sn, chain = 2.
2025-02-03 00:18:43 No chip bin, chain = 2
2025-02-03 00:18:43 No ft ver, chain = 2
2025-02-03 00:18:43 No test standard, chain = 2.
2025-02-03 00:18:46 ERROR_SOC_INIT: soc init failed!
2025-02-03 00:18:46 stop_mining: soc init failed!
2025-02-03 00:18:46 ****power off hashboard****
2025-02-03 00:18:46 No hash board sn, chain = 0.
2025-02-03 00:18:46 No chip bin, chain = 0
2025-02-03 00:18:46 No ft ver, chain = 0
2025-02-03 00:18:46 No test standard, chain = 0.
2025-02-03 00:18:46 No hash board sn, chain = 1.
2025-02-03 00:18:46 No chip bin, chain = 1
2025-02-03 00:18:46 No ft ver, chain = 1
2025-02-03 00:18:46 No test standard, chain = 1.
2025-02-03 00:18:46 No hash board sn, chain = 2.
2025-02-03 00:18:46 No chip bin, chain = 2
2025-02-03 00:18:46 No ft ver, chain = 2
2025-02-03 00:18:46 No test standard, chain = 2.
2025-02-03 00:18:47 No hash board sn, chain = 0.
2025-02-03 00:18:47 No chip bin, chain = 0
2025-02-03 00:18:47 No ft ver, chain = 0
2025-02-03 00:18:47 No test standard, chain = 0.
2025-02-03 00:18:47 No hash board sn, chain = 1.
2025-02-03 00:18:47 No chip bin, chain = 1
2025-02-03 00:18:47 No ft ver, chain = 1
2025-02-03 00:18:47 No test standard, chain = 1.
2025-02-03 00:18:47 No hash board sn, chain = 2.
2025-02-03 00:18:47 No chip bin, chain = 2
2025-02-03 00:18:47 No ft ver, chain = 2
2025-02-03 00:18:47 No test standard, chain = 2.
2025-02-03 00:18:47 temp monitor thread exit
2025-02-03 00:18:48 STATUS_OKAY
2025-02-03 00:18:48 set_start_time_point total_tv_start_sys=52 total_tv_end_sys=53
2025-02-03 00:19:26 reload pool, need recalculate
2025-02-03 00:19:26 set_start_time_point total_tv_start_sys=90 total_tv_end_sys=91
2025-02-03 00:19:27 start to init...
2025-02-03 00:19:28 No hash board sn, chain = 0.
2025-02-03 00:19:28 No chip bin, chain = 0
2025-02-03 00:19:28 No ft ver, chain = 0
2025-02-03 00:19:28 No test standard, chain = 0.
2025-02-03 00:19:28 No hash board sn, chain = 1.
2025-02-03 00:19:28 No chip bin, chain = 1
2025-02-03 00:19:28 No ft ver, chain = 1
2025-02-03 00:19:28 No test standard, chain = 1.
2025-02-03 00:19:28 No hash board sn, chain = 2.
2025-02-03 00:19:28 No chip bin, chain = 2
2025-02-03 00:19:28 No ft ver, chain = 2
2025-02-03 00:19:28 No test standard, chain = 2.
2025-02-03 00:19:28 No hash board sn, chain = 0.

BitMaxz

Legendary

Offline

Activity: 3920
Merit: 3564

Are we in consolidation phase?

Re: S19 - Updated firmware and now it wont mine

February 03, 2025, 06:25:33 PM

#18

Quote from: massivegoatdynamic on February 03, 2025, 02:22:28 AM

I'm not sure if it's a PSU but do some more troubleshoot first because PSU main voltage is controlled by PIC port and miner communication according to the structure how the PSU works
Read more here: "APW12 Power Supply Repair Guide"

Do more further insvestigation would you mind to try run only one hashboard and test them one by one and measure the voltage on the bus bar while you powering up the unit so that you can monitor the output on the startup.

Maybe one of the hashboard is shorted because the power supply has a short protection that can automatically cut the power.

.
betpanda.io

│

ANONYMOUS & INSTANT
.......ONLINE CASINO.......

│

SLOT GAMES
....SPORTS....
LIVE CASINO

│

Regional Sponsor of the
Argentina National Team

mikeywith

Legendary

Offline

Activity: 2842
Merit: 7136

Privacy is not a crime.

Re: S19 - Updated firmware and now it wont mine

February 04, 2025, 11:14:17 PM

#19

Don't measure the voltage on the busbar connecting the hashboards because that is useless, this is a smart PSU it does not send constant power to the hashboards and it is comnaded by the control board, if the control board is bad then no power would be there.

My guess is, you are flashing the firmware wrongly, I have not used Antminers for ages, but you mentioned using a bmu file to flash it from an Sdcard, I don't think that is going to work, you will need a zip file to extract to the sdcard, look here
https://www.zeusbtc.com/firmware-download/details/4878-sd-card-firmware-download-for-antminer-19-series

Another option is to go to awseomeminer or BO+ and get thier sdcard firmware.

b1exch.to

Instant Automated Exchange
.....................No Logs | No registration | No JavaScript .....................

ETH DAI BTC LTC USDT XMR

ACCESS VIA
Tor

███████████▄▀▄▀
█████████▄█▄▀
███████████
███████▄█▀

massivegoatdynamic (OP)

Newbie

Offline

Activity: 31
Merit: 0

Re: S19 - Updated firmware and now it wont mine

February 09, 2025, 05:57:26 PM

#20

Quote from: BitMaxz on February 03, 2025, 06:25:33 PM

Quote from: massivegoatdynamic on February 03, 2025, 02:22:28 AM

I disconnected each hash board's data cables and power running to each one, end result was no hashing.

Zeus had recommended trying to swap out all of the data cables and that also had the same result.

All I have is a volt meter to check things, those power supply instructions seem to require a few more tools.

Pages: [1] 2 » All

Bitcoin Forum > Bitcoin > Mining > Mining support > S19 - Updated firmware and now it wont mine

« previous topic next topic »