Problem Whatsminer M50 110 Th

[auyate]

Hello

I bought a used miner whatsminer M50 110 TH (has a person who bought it in January 2025)
This person used it in immersion for 1 month and it did not work anymore
When I turn it on impossible to make it hashé no matter what update I do (I have two or three error codes (309 and 500) or (309/320/500)
I bought and changed the map that connects the hashboards but I still have its errors
I’m waiting for the card I bought to change it too
If anyone has an idea I’m taking
Thank you in advance

(I also contacted the support who made me update the Whatsminer-M3x-all-20250214.bin update which went well but still the same error)
sorry for my rough English I’m French

Code:

03-07 17:42:00.00 N : Added device handler type: bridge
03-07 17:42:00.00 N : Added device handler type: macvlan
03-07 17:42:00.00 N : Added device handler type: 8021ad
03-07 17:42:00.00 N : Added device handler type: 8021q
03-07 17:42:00.29 I crond[2127]: crond (busybox 1.25.1) started, log level 8
03-07 17:42:00.75 E uhttpd[2262]: socket(): Address family not supported by protocol
03-07 17:42:00.75 E uhttpd[2262]: socket(): Address family not supported by protocol
03-07 17:42:01.15 I kernel: [   13.424691] libphy: gmac1: probed
03-07 17:42:01.21 N procd: /etc/rc.d/S80detect-btminer-config: cat: can't open '/tmp/eeprom/miner_type': No such file or directory
03-07 17:42:01.21 N procd: /etc/rc.d/S80detect-btminer-config: cat: can't open '/tmp/eeprom/chip_data': No such file or directory
03-07 17:42:01.24 I kernel: [   13.508230] sunxi-gmac gmac1 eth0: eth0: Type(6) PHY ID 00441400 at 0 IRQ poll (gmac1-0:00)
03-07 17:42:01.25 N netifd: Interface 'lan' is enabled
03-07 17:42:01.25 N netifd: Interface 'loopback' is enabled
03-07 17:42:01.25 N netifd: Interface 'loopback' is setting up now
03-07 17:42:01.25 N netifd: Interface 'loopback' is now up
03-07 17:42:01.26 N netifd: Network device 'eth0' link is up
03-07 17:42:01.26 N netifd: Interface 'lan' has link connectivity 
03-07 17:42:01.26 N netifd: Interface 'lan' is setting up now
03-07 17:42:01.26 N netifd: Network device 'lo' link is up
03-07 17:42:01.26 N netifd: Interface 'loopback' has link connectivity 
03-07 17:42:01.34 N root: miner_type=
03-07 17:42:01.36 N netifd: lan (2437): udhcpc: started, v1.25.1
03-07 17:42:01.39 N root: 03-07 17:42:01 init No miner config btminer.default.0
03-07 17:42:01.39 N procd: /etc/rc.d/S80detect-btminer-config: 03-07 17:42:01 init No miner config btminer.default.0
03-07 17:42:01.41 N root: miner config remains unchanged
03-07 17:42:01.43 N netifd: lan (2437): udhcpc: sending discover
03-07 17:42:01.44 N root: 03-07 17:42:01 init No miner config powers.default.0
03-07 17:42:01.44 N procd: /etc/rc.d/S80detect-btminer-config: 03-07 17:42:01 init No miner config powers.default.0
03-07 17:42:01.45 N root: /etc/config/powers --> /etc/config/powers.common remains unchanged
03-07 17:42:02.26 N netifd: Network device 'eth0' link is down
03-07 17:42:02.26 N netifd: Interface 'lan' has link connectivity loss
03-07 17:42:02.35 D : 
====================load_platform_cfg==================
name=CB6
version=10
gpio_led_red=257
gpio_led_green=258
gpio_key_ip=234
gpio_key_reset=233
gpio_watchdog_feed=256
gpio_io_power_en=-1
board_plug0=1
board_plug1=1
board_plug2=0
board_plug3=1
gpio_board_plug0=260
gpio_board_plug1=261
gpio_board_plug2=262
gpio_board_plug3=-1
gpio_board_reset0=201
gpio_board_reset1=202
gpio_board_reset2=203
gpio_board_reset3=-1
gpio_board_reset_detect0=193
gpio_board_reset_detect1=194
gpio_board_res03-07 17:42:02.38 N netifd: lan (2437): udhcpc: received SIGTERM
03-07 17:42:02.51 I keyd[2711]: keyd started.
03-07 17:42:02.60 N system-monitor[2669]: Set max miner log size to 5491097B
03-07 17:42:02.60 N system-monitor[2669]: Set max antiv log size to 137277B
03-07 17:42:02.61 N system-monitor[2669]: Set virtual eeprom bin1A
03-07 17:42:02.64 E system-monitor[2669]: Failed to load power config
03-07 17:42:02.64 N system-monitor[2669]: Overheat protection temp is 125.0
03-07 17:42:02.68 E system-monitor[2669]: Code<error>[309]: Slot9 temperature sensor not found
03-07 17:42:02.69 N system-monitor[2669]: MAC: CE:09:17:00:07:D1, Firmware version: 20250120.16.Rel,
03-07 17:42:02.69 N system-monitor[2669]: system-monitor started for test. (Platform is H616, kernel: 20250120)
03-07 17:42:02.81 N remote-daemon[2793]: remote-daemon version 2023-05-01 started (API version: 16).
03-07 17:42:02.95 N remote-daemon[2793]: Create socket and listen successfully.
03-07 17:42:03.29 N netifd: Network device 'eth0' link is up
03-07 17:42:03.29 N netifd: Interface 'lan' has link connectivity 
03-07 17:42:03.29 N netifd: Interface 'lan' is setting up now
03-07 17:42:03.29 I kernel: [   15.558719] sunxi-gmac gmac1 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
03-07 17:42:03.36 N netifd: lan (2946): udhcpc: started, v1.25.1
03-07 17:42:03.43 N netifd: lan (2946): udhcpc: sending discover
03-07 17:42:03.70 N API[3047]: API version: 2.0.5
03-07 17:42:03.77 N API[3047]: API. ver2.0.5 Create socket and listen successfully.
03-07 17:42:03.77 I API[3047]: failed to find option disable_btminer_init in file /etc/config/miner_setting
03-07 17:42:03.79 I API[3047]: failed to find option open_by_api in file /etc/config/miner_setting
03-07 17:42:04.02 N API-v2[3077]: API version: 3.0.1
03-07 17:42:04.02 N API-v2[3077]: 
****

  git commit ID: c36a2990d849742f45a9c238618fe7330d0bc622
  build time: Jan 20 2025 16:36:59
****
03-07 17:42:04.27 N btminer[3122]: Started /usr/bin/btminer git-bb39a33
03-07 17:42:04.28 N btminer[3122]: 
============btminer config==============
miner_type=Sorting
chip_id=1990
cool_mode=0
osc_freq=24M
baud_rate=12000000->0
board_num=3
chip_num=1
chip_column_num=1
cool_temp=60
========================================
03-07 17:42:04.28 N btminer[3122]: 
=============load_user_cfg==============
power_fan_enable: 1
power_mode: Normal
hash_percent: 0
temp_offset: 0
power_limit: 99999
fastboot: 0
heat_mode: 0
ut_speed: 0
ut_fails: 0
poweroff_cool: 1
fan_zero_speed: 0
work_without_net: 0
========================================
03-07 17:42:04.32 N btminer[3122]: upfreq config: 0.08 0.08 96
03-07 17:42:04.45 I procd: - init complete -
03-07 17:42:04.47 N btminer[3122]: NA:init session
03-07 17:42:04.52 N btminer[3122]: NA:allocate memory
03-07 17:42:04.52 N btminer[3122]: NA:init session
03-07 17:42:04.54 N btminer[3122]: NA:allocate memory
03-07 17:42:04.55 N btminer[3122]: power_manager_init: Detect power name: P221B, vender: 1, water temp: 0, sw_version: 230224.220429, hw_version: RT0159
03-07 17:42:04.55 N btminer[3122]: Set virtual eeprom bin1A
03-07 17:42:04.57 N btminer[3122]: 
=============load_power_cfg==============
bin: v01-1-A
name: P221B
power_max: 0
power_limit: 0/100.0%
freq_target: 0
hash_target: 0.00
voltage_min: 0
voltage_target: 0
voltage_limit: 0
pass_percent: 0.0
power_min: 0
power_rate: 0.0
voltage_boot: 0
voltage_boot_high: 0
03-07 17:42:04.57 N btminer[3122]: 
board_temp_target: 0
board_temp_limit: 114
board_temp_protect: 115
board_temp_overheat: 125
chip_temp_protect: 120
chip_temp_target: 115
ft_chip_temp_warn: -1
work mode: Normal
========================================
03-07 17:42:04.57 E btminer[3122]: No power matched! need power: P221B, vender: 1
03-07 17:42:04.57 E btminer[3122]: =================Assert=================
03-07 17:42:04.57 E btminer[3122]: power_manager_init-795:(0)
03-07 17:42:04.57 E btminer[3122]: load power P221B config error(version 0xffffffff) !
03-07 17:42:04.57 E btminer[3122]: ========================================
03-07 17:42:04.57 E btminer[3122]: assert exit.
03-07 17:42:04.57 E btminer[3122]: btminer_power_off
03-07 17:42:04.57 N btminer[3122]: Turn off power
03-07 17:42:04.58 W kernel: [   16.848314] btminer(pid 3122) sending sig 33 to btminer in btminer
03-07 17:42:06.47 N netifd: lan (2946): udhcpc: sending discover
03-07 17:42:06.78 N netifd: lan (2946): udhcpc: sending select for 192.168.1.41
03-07 17:42:07.09 N netifd: lan (2946): udhcpc: lease of 192.168.1.41 obtained, lease time 86400
03-07 17:42:07.12 N netifd: Interface 'lan' is now up
03-07 17:42:44.77 E uhttpd[2262]: cat: can't open '/tmp/eeprom/miner_type': No such file or directory
03-07 17:42:44.79 E uhttpd[2262]: cat: can't open '/tmp/eeprom/chip_data': No such file or directory
03-07 17:49:04.92 I kernel: [  436.526335] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
03-07 17:49:41.16 N remote-daemon[2793]: set_coin_type: BTC/BCH/BSV
03-07 17:49:42.04 N remote-daemon[2793]: 0: id=0 pool=stratum+tcp://stratum.f2pool.com:3333 worker=3PsaqVrmzvazij2EWqC2pXNvzRPvmW4Az8 pwd=x policy=FAILOVER quota=
03-07 17:49:42.04 N remote-daemon[2793]: rewrite pools
03-07 17:49:42.18 N remote-daemon[2793]: 1: id=1 pool= worker= pwd= policy=FAILOVER quota=
03-07 17:49:42.18 N remote-daemon[2793]: rewrite pools
03-07 17:49:42.18 N remote-daemon[2793]: 2: id=2 pool= worker= pwd= policy=FAILOVER quota=
03-07 17:49:42.18 N remote-daemon[2793]: rewrite pools
03-07 17:49:43.23 N remote-daemon[2793]: Set pool strategy=FAILOVER
03-07 17:49:43.76 N remote-daemon[2793]: Added pool url=stratum+tcp://stratum.f2pool.com:3333 worker=3PsaqVrmzvazij2EWqC2pXNvzRPvmW4Az8 pwd=x quota=
03-07 17:53:25.06 N root: 03-07 17:53:25 Export logs

[BitMaxz]

Is this the whole logs?
I suggest try to run it first for a while or atleast 1 hour and the copy the whole API logs and post it here.


Just incase if you want to troubleshoot the unit with yourself you can check all error codes below

- https://www.zeusbtc.com/articles/asic-miner-troubleshooting/1688-how-to-deal-with-fault-codes-of-whatsminer-series

For me, it looks like a PSU issue.

[auyate]

Code:

Antiv state 

Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/mapper/rootfs       43540     24980     17580  59% /
/dev/by-name/data         6651      1907      4581  29% /data
/dev/by-name/data_bak
                          6651      1548      4940  24% /data_bak
/dev/by-name/reserved
                         14839       303     13390   2% /data/logs
tmpfs                   108752       492    108260   0% /tmp
tmpfs                      512         0       512   0% /dev


LONG MINER STAT 

01-01 08:00:20 Miner Sorting(V0-1A), MAC:CE:0B:16:00:24:B9, version:20240523.18.REL, PowerHw:RT0159, PowerSw:230224.220429, PowerSn:1436B2428600312
03-08 22:25:24 0.0,0,nil,0|0.0,0,21,0|0.0,0,21,0|0,0|24|32, 0,144|0,25,237
01-01 08:00:22 Miner Sorting(V0-1A), MAC:CE:0B:16:00:24:B9, version:20250120.16.Rel, PowerHw:RT0159, PowerSw:230224.220429, PowerSn:1436B2428600312
03-09 00:21:12 0.0,0,nil,0|0.0,0,20,0|0.0,0,20,0|0,0|24|34, 0,144|0,26,237
03-09 00:31:40 0.0,0,nil,0|0.0,0,20,0|0.0,0,20,0|0,0|25|34, 0,144|0,25,237



MINER OVERVIEW

MINER_NAME='WhatsMiner'
FIRMWARE_VERSION='20250120.16.Rel'
BTMINER_MD5='336ef4a211b3b593ca52b95507549aba'
REMOTE_DAEMON_MD5='43db0e27599b6e0598de2cf195867955'
SYSTEM_MONITOR_MD5='0d2913b7133c1071cf01ad7251cc23f0'
API_MD5='1d782bcff3b301ce09d0bcf9034ba079'
API_V2_MD5='3fa735c6be600c6a0dce5f1408b17004'

[common]
uptime =  00:39:29 up 28 min, load average: 2.04, 2.09, 1.84
kernel_version = Linux version 4.9.170 (jenkins@microbt) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #1407 SMP PREEMPT Mon Jan 20 16:38:38 CST 2025
miner_type = 
control_board_version = H616.CB6V10
MAC = ce:0b:16:00:24:b9
cool_mode = 

[eeprom]
pcb0 = 
pcb1 = 
pcb2 = 
pcb3 = 
chip_data0 = 
chip_data1 = 
chip_data2 = 
chip_data3 = 
hashrate0 = 
hashrate1 = 
hashrate2 = 
hashrate3 = 
chip_type = 
firmware_type = eeprom

[power_info]
power_name = P221B-V1
serial_no = 1436B2428600312
sw_version = 230224.220429
hw_version = RT0159
date = 20240709

;/data/user_cfg

[power]
power_serial_no = 1436B2428600312



[code_error]
1970-01-01 08:00:22|4|309|Slot9 temperature sensor not found
1970-01-01 08:00:23|4|320|Slot0 temperature reading error
1970-01-01 08:00:21|3|500|init No miner config powers.default.0

[code_warn]

[code_info]
1970-01-01 08:00:22|1|288|Power vender status1 bit7 error. code: 0x80000000000000

Code:

01-01 08:00:14 Write antiv key

01-01 08:00:19 Write antiv key

01-01 08:00:20 Code<notice>[320]: reason: Slot0 temperature reading error
01-01 08:00:20 Code<info>[288]: reason: Power vender status1 bit7 error. code: 0x80000000000000
01-01 08:00:20 Miner Sorting(V0-1A), MAC:CE:0B:16:00:24:B9, version:20240523.18.REL, PowerHw:RT0159, PowerSw:230224.220429, PowerSn:1436B2428600312
01-01 08:00:21 Code<error>[309]: reason: Slot9 temperature sensor not found
01-01-08 hs0,freq0,bt0,ct0|hs1,freq1,bt1,ct1|...|fan0,fan1|env temp|cpu temp,cpu rate,mem|vout,pin,vin
00:21 0.0,0,nil,0|0.0,0,20,0|0.0,0,20,0|0,0|22|33, 6,160|0,36,236
01-01 08:00:21 Code<error>[320]: reason: Slot0 temperature reading error
01-01 08:00:22 Code<error>[2000]: reason: No pools config
00:24 0.0,0,nil,0|0.0,0,20,0|0.0,0,20,0|0,0|22|30, 0,154|0,41,236
00:27 0.0,0,nil,0|0.0,0,20,0|0.0,0,20,0|0,0|22|29, 0,154|0,42,236
00:30 0.0,0,nil,0|0.0,0,20,0|0.0,0,20,0|0,0|22|29, 0,154|0,51,236
03-08-22 hs0,freq0,bt0,ct0|hs1,freq1,bt1,ct1|...|fan0,fan1|env temp|cpu temp,cpu rate,mem|vout,pin,vin

01-08:00 en/eset iout vout/vset iin vin pin fan  t0/t1/t2 stat
22	0/1	  0.0	   0/1220  0.7 235.2   36 9504 20/19/21 80000000000000
23	0/1	  0.0	   0/1220  0.8 235.2   38 9360 20/19/21 80000000000000
24	0/1	  0.0	   0/1220  0.8 235.5   43 9360 20/19/21 0
25	0/1	  0.0	   0/1220  0.8 235.5   41 9312 20/19/21 0
26	0/1	  0.0	   0/1220  0.8 235.5   41 9312 20/19/21 0
27	0/1	  0.0	   0/1220  0.7 235.5   38 9216 20/19/21 0
28	0/1	  0.0	   0/1220  0.7 235.5   35 9248 20/19/21 0
29	0/1	  0.0	   0/1220  0.7 235.5   34 9200 20/19/21 0
30	0/1	  0.0	   0/1220  0.7 235.5   35 9104 20/19/21 0
31	0/1	  0.0	   0/1220  0.7 235.5   36 9120 20/19/21 0
32	0/1	  0.0	   0/1220  0.7 235.8   34 9072 20/19/21 0
33	0/1	  0.0	   0/1220  0.7 235.5   33 8992 20/19/21 0
34	0/1	  0.0	   0/1220  0.8 235.5   37 8928 20/19/21 0


Mem: 69744K used, 147760K free, 520K shrd, 1344K buff, 17980K cached
CPU:   0% usr   2% sys   0% nic  97% idle   0% io   0% irq   0% sirq
Load average: 2.12 2.11 1.86 1/96 7206
  PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
 7206  7114 root     R     1140   1%   2% top -n 1 -b
 1824     1 root     S     5136   2%   0% /sbin/logd -S 4096
 3089     1 root     S     4792   2%   0% /usr/bin/api-v2
 2660     1 root     S     4728   2%   0% /usr/bin/system-monitor
 3059     1 root     S     4440   2%   0% /usr/bin/api
 2798     1 root     S     4324   2%   0% /usr/bin/remote-daemon
 2704     1 root     S     3984   2%   0% /usr/bin/keyd
 1685     1 root     S     3980   2%   0% /usr/bin/ipfilter
 2639     1 root     S     3976   2%   0% /usr/bin/watchdog
 2255     1 root     S     1996   1%   0% /usr/sbin/uhttpd -f -h /www -r WhatsMiner -x /cgi-bin -u /ubus -t 60 -T 30 -k 20 -A 1 -n 3 -N 100 -p 0.0.0.0:80 -p [::]:80 -C /etc/uhttpd.crt -K /etc/uhttpd.key -s 0.0.0.0:443 -s [::]:443 -q
 2025     1 root     S     1604   1%   0% /sbin/netifd
    1     0 root     S     1452   1%   0% /sbin/procd
 1885     1 root     S     1332   1%   0% /sbin/rpcd
 7114  7113 root     S     1220   1%   0% {pack-miner-logs} /bin/sh /usr/bin/pack-miner-logs
 1690  1688 root     S     1208   1%   0% logread -f
 2964     1 root     S <   1132   1%   0% /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.cn.pool.ntp.org -p 0.openwrt.pool.ntp.org -p 0.asia.pool.ntp.org -p 0.pool.ntp.org
 2120     1 root     S     1132   1%   0% /usr/sbin/crond -f -c /etc/crontabs -l 8
 7113  2798 root     S     1128   1%   0% sh -c /usr/bin/pack-miner-logs
 1688  1685 root     S     1128   1%   0% sh -c logread -f
 2951  2025 root     S     1128   1%   0% udhcpc -p /var/run/udhcpc-eth0.pid -s /lib/netifd/dhcp.script -f -t 0 -i eth0 -x hostname WhatsMiner -C -O 121
 2315     1 root     S     1076   0%   0% /usr/sbin/tee-supplicant

[moderator's note: consecutive posts merged]

[NotFuzzyWarm]

Forum tip: Please use the code tag # to collapse those text-wall logs down to a much better scrollable window...

[auyate]

sorry I did not know that this was possible, sorry

[NotFuzzyWarm]

NP. You can of course edit the post, just select the logs and hit the code tag to change them..

[auyate]

Is this the whole logs?
I suggest try to run it first for a while or atleast 1 hour and the copy the whole API logs and post it here.


Just incase if you want to troubleshoot the unit with yourself you can check all error codes below

- https://www.zeusbtc.com/articles/asic-miner-troubleshooting/1688-how-to-deal-with-fault-codes-of-whatsminer-series

For me, it looks like a PSU issue.

Thank you very much for the answer

I think you are right because I changed the card that connects the hashboards today and also the motherboard and I have exactly the same codes (I will have to wait a little since the PSU is worth 350 to 400e)

[NotFuzzyWarm]

sorry I did not know that this was possible, sorry

Good job with the logs. Merit given for being on the ball and quick learner.