EmotionalThrifty (OP)
Newbie
 Offline
Activity: 5
Merit: 3
|
 |
March 24, 2025, 09:47:46 PM |
|
Hola, I'm seeking help with an issue I'm having with my new Antminer S21 XP. Here's my situation: Hardware Setup:- Antminer S21 XP (brand new)
- Electrician replaced the power supply cable (not the original one)
- Miner is placed in a ZeusBTC Silencer Box, with the fans removed
Network Setup:- Miner is accessible via IP
- Connected through multiple switches to my router
Steps Taken So Far:- Tested two different pools (Braiins and F2Pool)
- Performed an official firmware update
- Reset the miner
Problem:Despite these efforts, the miner continues to show a "Network Abnormal" status, regardless of how long I wait. Both pools display the same behavior. Here are the current logs:[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Tue Nov 5 18:08:59 CST 2024
[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[ 0.000000@0] bootconsole [aml_uart0] enabled
[ 0.000000@0] efi: Getting EFI parameters from FDT:
[ 0.000000@0] efi: UEFI not found.
[ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000@0] On node 0 totalpages: 65536
[ 0.000000@0] DMA zone: 1024 pages used for memmap
[ 0.000000@0] DMA zone: 0 pages reserved
[ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 rootfstype=ramfs init=/sbin/init
[ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 208612K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 33052K reserved, 20480K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB)
[ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB)
[ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB)
[ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB)
[ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139034 ( 1018 KB)
[ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] axg_aoclkc_init: register ao clk ok!
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_media: register meson media clk
[ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[ 0.000000@0] axg_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008254@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[ 0.016896@0] Console: colour dummy device 80x25
[ 0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.031586@0] pid_max: default: 32768 minimum: 301
[ 0.036436@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[ 0.045773@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[ 0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[ 0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[ 0.068603@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[ 0.074903@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[ 0.081203@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[ 0.087503@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[ 0.093803@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[ 0.100103@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[ 0.106463@0] Security Framework initialized
[ 0.110696@0] SELinux: Initializing.
[ 0.114387@0] SELinux: Starting in permissive mode
[ 0.114423@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.121107@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.128833@0] ftrace: allocating 30061 entries in 118 pages
[ 0.186216@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.187033@0] CPU0: update cpu_capacity 1024
[ 0.191359@0] ASID allocator initialised with 32768 entries
[ 0.229492@0] secmon: can't fine clear_range
[ 0.229696@0] EFI services will not be available.
[ 0.232964@0] Meson chip version = RevC (25:C - 23:0)
[ 0.266632@1] Detected VIPT I-cache on CPU1
[ 0.266692@1] CPU1: update cpu_capacity 1024
[ 0.266694@1] CPU1: Booted secondary processor [410fd034]
[ 0.294704@2] Detected VIPT I-cache on CPU2
[ 0.294757@2] CPU2: update cpu_capacity 1024
[ 0.294759@2] CPU2: Booted secondary processor [410fd034]
[ 0.322756@3] Detected VIPT I-cache on CPU3
[ 0.322805@3] CPU3: update cpu_capacity 1024
[ 0.322808@3] CPU3: Booted secondary processor [410fd034]
[ 0.322897@0] Brought up 4 CPUs
[ 0.362118@0] SMP: Total of 4 processors activated.
[ 0.367028@0] CPU features: detected feature: 32-bit EL0 Support
[ 0.373064@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.383619@0] CPU: All CPU(s) started at EL2
[ 0.384803@0] alternatives: patching kernel code
[ 0.390105@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[ 0.397327@0] devtmpfs: initialized
[ 0.412323@0] DMI not present or invalid.
[ 0.412722@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.420686@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.427266@0] pinctrl core: initialized pinctrl subsystem
[ 0.433656@0] NET: Registered protocol family 16
[ 0.457600@2] cpuidle: using governor menu
[ 0.458091@2] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[ 0.463705@2] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[ 0.471111@2] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.477278@2] clkmsr: clkmsr: driver init
[ 0.481306@2] aml_watch_point_probe, in, wp:2
[ 0.485880@2] pstore: using zlib compression
[ 0.490142@2] console [pstore-1] enabled
[ 0.493588@2] pstore: Registered ramoops as persistent store backend
[ 0.499998@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.514354@2] aml_iomap: amlogic iomap probe done
[ 0.521125@2] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[ 0.523044@2] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[ 0.623094@2] usbcore: registered new interface driver usbfs
[ 0.623271@2] usbcore: registered new interface driver hub
[ 0.628860@2] usbcore: registered new device driver usb
[ 0.634170@2] pps_core: LinuxPPS API ver. 1 registered
[ 0.639099@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.648496@2] PTP clock support registered
[ 0.652828@2] dmi: Firmware registration failed.
[ 0.657795@2] secmon: reserve_mem_size:0x300000
[ 0.661851@2] secmon secmon: assigned reserved memory node linux,secmon
[ 0.668740@2] secmon: get page:ffffffbf00140000, 5000
[ 0.673478@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[ 0.681860@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.689743@2] NetLabel: Initializing
[ 0.691909@2] NetLabel: domain hash size = 128
[ 0.696485@2] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.701738@2] NetLabel: unlabeled traffic allowed by default
[ 0.708323@2] clocksource: Switched to clocksource arch_sys_counter
[ 0.835081@2] VFS: Disk quotas dquot_6.6.0
[ 0.835228@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.861045@2] NET: Registered protocol family 2
[ 0.862085@2] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.867320@2] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.873956@2] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.880529@2] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.886502@2] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.893257@2] NET: Registered protocol family 1
[ 0.898206@2] RPC: Registered named UNIX socket transport module.
[ 0.903631@2] RPC: Registered udp transport module.
[ 0.908513@2] RPC: Registered tcp transport module.
[ 0.913412@2] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.922546@2] Unpacking initramfs...
[ 1.580073@1] Initramfs unpacking failed: junk in compressed archive
[ 1.589781@1] Freeing initrd memory: 9652K
[ 1.590676@1] hw perfevents: clusterb_enabled = 0
[ 1.593014@1] hw perfevents: cpumasks 0xf, 0x0
[ 1.597527@1] hw perfevents: cluster A irq = 7
[ 1.602067@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.612123@1] audit: initializing netlink subsys (disabled)
[ 1.615604@1] audit: type=2000 audit(1.476:1): initialized
[ 1.622881@1] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 1.646629@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.649534@1] NFS: Registering the id_resolver key type
[ 1.652293@1] Key type id_resolver registered
[ 1.656685@1] Key type id_legacy registered
[ 1.661307@1] fuse init (API version 7.26)
[ 1.666635@1] SELinux: Registering netfilter hooks
[ 1.673116@1] NET: Registered protocol family 38
[ 1.673179@1] Key type asymmetric registered
[ 1.676414@1] Asymmetric key parser 'x509' registered
[ 1.681894@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.689133@1] io scheduler noop registered (default)
[ 1.694078@1] io scheduler deadline registered
[ 1.698951@1] io scheduler cfq registered
[ 1.719159@2] random: fast init done
[ 1.719256@2] random: crng init done
[ 1.719710@1] Unable to detect cache hierarchy for CPU 0
[ 1.762027@1] loop: module loaded
[ 1.763473@1] zram: Added device: zram0
[ 1.763907@1] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.770897@1] libphy: Fixed MDIO Bus: probed
[ 1.775391@1] tun: Universal TUN/TAP device driver, 1.6
[ 1.779777@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.787960@1] ee eth reset:Addr = ffffff80081fd008
[ 1.795488@1] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 1.797448@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.802681@1] Ring mode enabled
[ 1.805919@1] DMA HW capability register supported
[ 1.810641@1] Normal descriptors
[ 1.813964@1] RX Checksum Offload Engine supported
[ 1.818865@1] COE Type 2
[ 1.821494@1] TX Checksum insertion supported
[ 1.825954@1] Wake-Up On Lan supported
[ 1.829903@1] Enable RX Mitigation via HW Watchdog Timer
[ 1.843352@1] libphy: stmmac: probed
[ 1.843405@1] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[ 1.849854@1] PPP generic driver version 2.4.2
[ 1.852832@1] PPP BSD Compression module registered
[ 1.857337@1] PPP Deflate Compression module registered
[ 1.862588@1] PPP MPPE Compression module registered
[ 1.867553@1] NET: Registered protocol family 24
[ 1.873038@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.878952@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.886006@1] usbcore: registered new interface driver cdc_acm
[ 1.891199@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.899639@1] usbcore: registered new interface driver usbserial
[ 1.906382@3] mousedev: PS/2 mouse device common for all mice
[ 1.911848@3] usbcore: registered new interface driver xpad
[ 1.917183@1] i2c /dev entries driver
[ 1.921899@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.926161@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.937121@1] ff803000.serial: clock gate not found
[ 1.938674@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[ 1.945897@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[ 1.960814@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.963499@1] console [ttyS0] enabled
[ 1.970734@1] bootconsole [aml_uart0] disabled
[ 1.980461@2] ff804000.serial: clock gate not found
[ 1.984526@2] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[ 1.991627@2] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 2.001982@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[ 2.008121@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 2.018328@0] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[ 2.024638@0] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[ 2.035549@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[ 2.044875@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[ 2.051348@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[ 2.066410@2] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 2.070177@2] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 2.082555@2] aml_dma ff63e000.aml_dma: Aml dma
[ 2.085676@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 2.090661@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 2.097072@2] efusekeynum: 4
[ 2.099362@2] efusekeyname: mac offset: 0 size: 6
[ 2.105812@2] efusekeyname: mac_bt offset: 6 size: 6
[ 2.112211@2] efusekeyname: mac_wifi offset: 12 size: 6
[ 2.118620@2] efusekeyname: usid offset: 18 size: 16
[ 2.125470@1] efuse efuse: probe OK!
[ 2.130899@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 2.138095@1] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode
[ 2.143221@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 2.148434@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[ 2.192466@1] meson-mmc: meson_mmc_probe() : success!
[ 2.192721@1] amlogic mtd driver init
[ 2.196795@1] prase_get_dtb_nand_parameter:128,parse dts start
[ 2.201539@1] bl mode descrete
[ 2.204418@1] fip_copies 4
[ 2.207082@1] fip_size 0x200000
[ 2.210222@1] nand_clk_ctrl 0xffe07000
[ 2.213946@1] prase_get_dtb_nand_parameter:234,parse dts end
[ 2.219613@1] nand_clk_ctrl 0xffe07000
[ 2.223334@1] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[ 2.232067@1] plat->aml_nand_device ffffff800a005c10
[ 2.236243@1] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.242301@1] NAND device id: 2c da 90 95 6 0
[ 2.246371@1] NAND device: Manufacturer ID:
[ 2.250435@1] 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[ 2.257478@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.262911@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.268460@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.274704@1] mtd->oobavail: 0x8
[ 2.278102@1] aml_nand_init 2119: plat-name:bootloader
[ 2.283024@1] Creating 1 MTD partitions on "bootloader":
[ 2.288326@1] 0x000000000000-0x000000200000 : "bootloader"
[ 2.297337@0] bootloader initialized ok
[ 2.297572@0] plat->aml_nand_device ffffff800a005c10
[ 2.302562@0] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.308682@0] NAND device id: 2c da 90 95 6 0
[ 2.312670@0] NAND device: Manufacturer ID:
[ 2.316743@0] 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[ 2.323777@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.329219@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.334760@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.341013@0] mtd->oobavail: 0x8
[ 2.344481@0] aml_nand_init 2119: plat-name:nandnormal
[ 2.349365@0] bbt_start=20
[ 2.351986@0] env_start=24
[ 2.354693@0] key_start=32
[ 2.357385@0] dtb_start=40
[ 2.360045@0] ddr_start=44
[ 2.362754@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[ 2.369240@0] get_free_node 43: bitmap=0
[ 2.372720@0] get_free_node 55: bitmap=1
[ 2.376811@0] get_free_node 43: bitmap=1
[ 2.380518@0] get_free_node 55: bitmap=3
[ 2.384610@0] get_free_node 43: bitmap=3
[ 2.388318@0] get_free_node 55: bitmap=7
[ 2.392202@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[ 2.398889@0] nbbt free list:
[ 2.401837@0] blockN=21, ec=-1, dirty_flag=0
[ 2.406083@0] blockN=22, ec=-1, dirty_flag=0
[ 2.410330@0] blockN=23, ec=-1, dirty_flag=0
[ 2.414578@0] aml_nand_scan_rsv_info 1141: page_num=1
[ 2.419987@0] nbbt valid addr: 280000
[ 2.423246@0] aml_nand_bbt_check 1306 bbt is valid, reading.
[ 2.428879@0] aml_nand_read_rsv_info:423,read nbbt info at 280000
[ 2.435139@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[ 2.441567@0] get_free_node 43: bitmap=7
[ 2.445085@0] get_free_node 55: bitmap=f
[ 2.449176@0] get_free_node 43: bitmap=f
[ 2.452885@0] get_free_node 55: bitmap=1f
[ 2.457063@0] get_free_node 43: bitmap=1f
[ 2.460858@0] get_free_node 55: bitmap=3f
[ 2.465036@0] get_free_node 43: bitmap=3f
[ 2.468831@0] get_free_node 55: bitmap=7f
[ 2.473009@0] get_free_node 43: bitmap=7f
[ 2.476805@0] get_free_node 55: bitmap=ff
[ 2.480981@0] get_free_node 43: bitmap=ff
[ 2.484778@0] get_free_node 55: bitmap=1ff
[ 2.489043@0] get_free_node 43: bitmap=1ff
[ 2.492925@0] get_free_node 55: bitmap=3ff
[ 2.496998@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[ 2.503668@0] nenv free list:
[ 2.506616@0] blockN=25, ec=-1, dirty_flag=0
[ 2.510863@0] blockN=26, ec=-1, dirty_flag=0
[ 2.515109@0] blockN=27, ec=-1, dirty_flag=0
[ 2.519356@0] blockN=28, ec=-1, dirty_flag=0
[ 2.523602@0] blockN=29, ec=-1, dirty_flag=0
[ 2.527849@0] blockN=30, ec=-1, dirty_flag=0
[ 2.532096@0] blockN=31, ec=-1, dirty_flag=0
[ 2.536344@0] aml_nand_scan_rsv_info 1141: page_num=32
[ 2.553588@0] nenv valid addr: 310000
[ 2.553621@0] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[ 2.557978@0] get_free_node 43: bitmap=3ff
[ 2.561859@0] get_free_node 55: bitmap=7ff
[ 2.566124@0] get_free_node 43: bitmap=7ff
[ 2.570006@0] get_free_node 55: bitmap=fff
[ 2.574271@0] get_free_node 43: bitmap=fff
[ 2.578153@0] get_free_node 55: bitmap=1fff
[ 2.582504@0] get_free_node 43: bitmap=1fff
[ 2.586473@0] get_free_node 55: bitmap=3fff
[ 2.590824@0] get_free_node 43: bitmap=3fff
[ 2.594792@0] get_free_node 55: bitmap=7fff
[ 2.599142@0] get_free_node 43: bitmap=7fff
[ 2.603112@0] get_free_node 55: bitmap=ffff
[ 2.607464@0] get_free_node 43: bitmap=ffff
[ 2.611433@0] get_free_node 55: bitmap=1ffff
[ 2.615879@0] get_free_node 43: bitmap=1ffff
[ 2.619927@0] get_free_node 55: bitmap=3ffff
[ 2.624173@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.630843@0] nkey free list:
[ 2.633791@0] blockN=32, ec=-1, dirty_flag=0
[ 2.638038@0] blockN=33, ec=-1, dirty_flag=0
[ 2.642284@0] blockN=34, ec=-1, dirty_flag=0
[ 2.646531@0] blockN=35, ec=-1, dirty_flag=0
[ 2.650777@0] blockN=36, ec=-1, dirty_flag=0
[ 2.655024@0] blockN=37, ec=-1, dirty_flag=0
[ 2.659271@0] blockN=38, ec=-1, dirty_flag=0
[ 2.663517@0] blockN=39, ec=-1, dirty_flag=0
[ 2.667764@0] aml_nand_scan_rsv_info 1141: page_num=16
[ 2.672877@0] nkey valid addr: fffffffffffe0000
[ 2.677384@0] aml_nand_key_check 1251 NO key exist
[ 2.682153@0] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[ 2.688774@0] get_free_node 43: bitmap=3ffff
[ 2.692640@0] get_free_node 55: bitmap=7ffff
[ 2.697077@0] get_free_node 43: bitmap=7ffff
[ 2.701133@0] get_free_node 55: bitmap=fffff
[ 2.705570@0] get_free_node 43: bitmap=fffff
[ 2.709626@0] get_free_node 55: bitmap=1fffff
[ 2.713959@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[ 2.720630@0] ndtb free list:
[ 2.723561@0] blockN=41, ec=-1, dirty_flag=0
[ 2.727824@0] blockN=42, ec=-1, dirty_flag=0
[ 2.732068@0] blockN=43, ec=-1, dirty_flag=0
[ 2.736318@0] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.753549@0] ndtb valid addr: 500000
[ 2.753583@0] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[ 2.758030@0] get_free_node 43: bitmap=1fffff
[ 2.762172@0] get_free_node 55: bitmap=3fffff
[ 2.766696@0] get_free_node 43: bitmap=3fffff
[ 2.770839@0] get_free_node 55: bitmap=7fffff
[ 2.775172@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.781842@0] nddr free list:
[ 2.784790@0] blockN=44, ec=-1, dirty_flag=0
[ 2.789036@0] blockN=45, ec=-1, dirty_flag=0
[ 2.793283@0] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.798397@0] nddr valid addr: fffffffffffe0000
[ 2.802904@0] aml_nand_ddr_check 1281 NO ddr exist
[ 2.807674@0] tpl: off 8388608, size 8388608
[ 2.939324@0] Creating 6 MTD partitions on "nandnormal":
[ 2.939371@0] 0x000000800000-0x000001000000 : "tpl"
[ 2.950737@3] 0x000001000000-0x000001200000 : "misc"
[ 2.954670@1] 0x000001200000-0x000002200000 : "recovery"
[ 2.966697@1] 0x000002200000-0x000004200000 : "boot"
[ 2.986475@1] 0x000004200000-0x000004700000 : "config"
[ 2.991993@1] 0x000004700000-0x000010000000 : "nvdata"
[ 3.092648@3] nandnormal initialized ok
[ 3.092755@3] aml_ubootenv_init: register env chardev
[ 3.096239@3] aml_ubootenv_init: register env chardev OK
[ 3.101337@3] amlnf_dtb_init: register dtb cdev
[ 3.106169@3] amlnf_dtb_init: register dtd cdev OK
[ 3.110518@3] mtd_nand_probe 267 , err = 0
[ 3.115641@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 3.121069@3] input: aml_vkeypad as /devices/platform/rtc/input/input0
[ 3.128071@2] unifykey: storage in base: 0xffffffc005000000
[ 3.132716@2] unifykey: storage out base: 0xffffffc005040000
[ 3.138280@2] unifykey: storage block base: 0xffffffc005080000
[ 3.144102@2] unifykey: probe done!
[ 3.148297@2] unifykey: no efuse-version set, use default value: -1
[ 3.153798@2] unifykey: key unify config unifykey-num is 6
[ 3.159339@2] unifykey: key unify fact unifykey-num is 6
[ 3.164548@2] unifykey: unifykey_devno: f200000
[ 3.169547@0] unifykey: device unifykeys created ok
[ 3.174041@0] unifykey: aml_unifykeys_init done!
[ 3.178938@0] sysled: module init
[ 3.182441@0] meson_wdt ffd0f0d0.watchdog: start watchdog
[ 3.187190@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.194613@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.203392@0] dmc_monitor_probe
[ 3.209686@0] defendkey defendkey: Reserved memory is not enough!
[ 3.210179@0] defendkey: probe of defendkey failed with error -22
[ 3.216597@0] GACT probability NOT on
[ 3.219876@0] Mirror/redirect action on
[ 3.223713@0] u32 classifier
[ 3.226549@0] Actions configured
[ 3.230107@0] Netfilter messages via NETLINK v0.30.
[ 3.235373@0] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 3.241602@0] ctnetlink v0.93: registering with nfnetlink.
[ 3.247513@0] xt_time: kernel timezone is -0000
[ 3.251165@0] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.257808@0] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.262481@0] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.267979@0] Initializing XFRM netlink socket
[ 3.273502@0] NET: Registered protocol family 10
[ 3.279419@0] mip6: Mobile IPv6
[ 3.280055@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.286050@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.294023@0] NET: Registered protocol family 17
[ 3.296260@0] NET: Registered protocol family 15
[ 3.300914@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.314057@0] l2tp_core: L2TP core driver, V2.0
[ 3.318437@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.323365@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.329108@0] l2tp_netlink: L2TP netlink interface
[ 3.333928@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.339976@0] l2tp_debugfs: L2TP debugfs support
[ 3.344524@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.351160@0] NET: Registered protocol family 35
[ 3.356095@0] Key type dns_resolver registered
[ 3.360664@0] Registered swp emulation handler
[ 3.364542@0] Registered cp15_barrier emulation handler
[ 3.369745@0] Registered setend emulation handler
[ 3.374480@0] disable EAS feature
[ 3.379001@3] registered taskstats version 1
[ 3.395598@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.902087@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.902179@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.910508@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[ 3.918908@1] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[ 3.926367@0] hub 1-0:1.0: USB hub found
[ 3.928858@0] hub 1-0:1.0: 1 port detected
[ 3.933465@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.938481@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.946386@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.955861@3] hub 2-0:1.0: USB hub found
[ 3.958484@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.965758@3] usb usb2: Unsupported the hub
[ 3.970599@3] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:08 UTC (1420070408)
[ 3.978599@3] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00cd9bc00)
[ 3.978676@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.986558@3] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[ 3.986571@3] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00d81f000
[ 4.087166@1] dwc_otg: Core Release: 3.10a
[ 4.087267@1] dwc_otg: Setting default values for core params
[ 4.091421@1] dwc_otg: curmode: 0, host_only: 0
[ 4.095919@1] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[ 4.108459@1] dwc_otg: Using Buffer DMA mode
[ 4.108497@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 4.112404@1] dwc_otg: Working on port type = SLAVE
[ 4.117261@1] dwc_otg: Dedicated Tx FIFOs mode
[ 4.124446@0] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[ 4.130963@0] cpucore_cooling_register, max_cpu_core_num:4
[ 4.143551@0] gxbb_pm: enter meson_pm_probe!
[ 4.143608@0] no vddio3v3_en pin
[ 4.145301@0] pm-meson aml_pm: Can't get switch_clk81
[ 4.150356@0] gxbb_pm: meson_pm_probe done
[ 4.155279@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.161657@0] Freeing unused kernel memory: 3648K
[ 4.176449@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.436419@0] ubi0: attaching mtd5
[ 4.454881@0] ubi0: scanning is finished
[ 4.459610@3] ubi0: attached mtd5 (name "config", size 5 MiB)
[ 4.459738@3] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.466804@3] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.473713@3] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.480816@3] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[ 4.486875@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.494250@3] ubi0: max/mean erase counter: 9/4, WL threshold: 4096, image sequence number: 1204542786
[ 4.503515@3] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[ 4.512735@0] ubi0: background thread "ubi_bgt0d" started, PID 1077
[ 4.525843@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1081
[ 4.542356@1] UBIFS (ubi0:0): recovery needed
[ 4.589779@1] UBIFS (ubi0:0): recovery completed
[ 4.590037@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[ 4.596780@1] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.606826@1] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.617048@1] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[ 4.623638@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 198881AF-CB38-4FB6-AB32-C3A03370352C, small LPT model
[ 4.647824@1] ubi2: attaching mtd6
[ 5.321508@1] ubi2: scanning is finished
[ 5.329098@2] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[ 5.329403@2] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.336459@2] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.343378@2] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.350481@2] ubi2: good PEBs: 1480, bad PEBs: 0, corrupted PEBs: 0
[ 5.356722@2] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.364082@2] ubi2: max/mean erase counter: 15/5, WL threshold: 4096, image sequence number: 1872316920
[ 5.373448@2] ubi2: available PEBs: 0, total reserved PEBs: 1480, PEBs reserved for bad PEB handling: 4
[ 5.382824@1] ubi2: background thread "ubi_bgt2d" started, PID 1089
[ 5.395785@2] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1093
[ 5.412388@3] UBIFS (ubi2:0): recovery needed
[ 5.481425@3] UBIFS (ubi2:0): recovery completed
[ 5.481720@3] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdada_log"
[ 5.488351@3] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.498385@3] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 5.509213@3] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.515975@3] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID D33BAF89-A108-466E-B4A0-42FA01BF82E0, small LPT model
[ 5.746931@3] eth0: device MAC address 02:97:1b:9a:6c:ff
[ 5.829457@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.830763@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.078674@0] uart_trans: loading out-of-tree module taints kernel.
[ 6.081505@0] register uart_trans chrdev success.
[ 6.084566@0] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[ 6.092426@0] tty port open success [/dev/ttyS3]!
[ 6.096837@0] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[ 6.105210@0] init sucess for tty struct (246:3) [/dev/ttyS3]
[ 6.111395@0] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[ 6.119066@0] tty port open success [/dev/ttyS2]!
[ 6.123729@0] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[ 6.132133@0] init sucess for tty struct (246:2) [/dev/ttyS2]
[ 6.138241@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 6.145879@0] tty port open success [/dev/ttyS1]!
[ 6.150560@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 6.158973@0] init sucess for tty struct (246:1) [/dev/ttyS1]
[ 6.164976@0] create workqueue success!
[ 7.876590@0] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 7.879889@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.790321@3] uart trans dev open.
[ 29.790446@3] uart_buf virt addr = 0xffffffc00df40000
[ 29.793226@3] uart_buf phys addr = 0x0df40000
[ 29.797499@3] uart_buf pfn = 0x0000df40
[ 29.801861@3] uart trans stop send work timer.
[ 29.806415@3] uart trans set chain exist bits:0x7.
[ 29.811018@3] uart trans set work queue count 768.
[ 65.415409@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
===========================================Miner log===========================================
2015-01-01 00:00:15 Open miner sn file /config/mac error
2015-01-01 00:00:15 Miner compile time: Tue Nov 5 16:42:48 CST 2024 type: Antminer S21 XP sn :JYZZFMUBDJGBF000L mac:
2015-01-01 00:00:16 This is fix-freq version
2015-01-01 00:00:16 Miner compile time: Tue Nov 5 16:42:48 CST 2024 type: Antminer S21 XP
2015-01-01 00:00:16 Miner sn: JYZZFMUBDJGBF000L
2015-01-01 00:00:16 commit version: 62efe336 2024-08-15 13:07:46, build by: jenkins 2024-11-05 17:42:40
2015-01-01 00:00:16 opt_multi_version = 1
2015-01-01 00:00:16 opt_bitmain_ab = 1
2015-01-01 00:00:16 mid_auto_gen = 1
2015-01-01 00:00:17 opt_bitmain_work_mode = 0
2015-01-01 00:00:17 port 439 already exported
2015-01-01 00:00:17 port 454 already exported
2015-01-01 00:00:17 port 440 already exported
2015-01-01 00:00:17 port 455 already exported
2015-01-01 00:00:17 port 441 already exported
2015-01-01 00:00:17 port 456 already exported
2015-01-01 00:00:17 port 438 already exported
2015-01-01 00:00:17 port 453 already exported
2015-01-01 00:00:17 port 446 already exported
2015-01-01 00:00:17 port 445 already exported
2015-01-01 00:00:17 create thread oled_display_thread
2015-01-01 00:00:17 Note: front fan is power on!
2015-01-01 00:00:17 Note: rear fan is power on!
2015-01-01 00:00:17 start the http server
2015-01-01 00:00:17 httpserver:6060 started ok
2015-01-01 00:00:17 i2c chain = 0, master = 0x0, slave = 0x78
2015-01-01 00:00:17 load machine A3HB70501 conf
2015-01-01 00:00:17 machine : A3HB70501
2015-01-01 00:00:17 get test_loop_securely_find_asic_num failed
2015-01-01 00:00:17 get adjust strategy failed
2015-01-01 00:00:17 parse adjust strategy failed
2015-01-01 00:00:17 abandon mix board!
2015-01-01 00:00:17 get mix boardname[0][A3HB70501], name:A3HB70501
2015-01-01 00:00:17 bad chain id = 3
2015-01-01 00:00:20 bad chain id = 3
2015-01-01 00:00:22 power off
2025-03-24 05:22:03 i2c chain = 0, master = 0x0, slave = 0x98
2025-03-24 05:22:03 get temp:[8]
2025-03-24 05:22:03 ==========================capability start==========================
2025-03-24 05:22:03 board num = 3
2025-03-24 05:22:03 board id = 0, chain num = 1
2025-03-24 05:22:03 chain id = 0
2025-03-24 05:22:03 board id = 1, chain num = 1
2025-03-24 05:22:03 chain id = 1
2025-03-24 05:22:03 board id = 2, chain num = 1
2025-03-24 05:22:03 chain id = 2
2025-03-24 05:22:03 ==========================capability end============================
2025-03-24 05:22:03 chain num = 3
2025-03-24 05:22:03 i2c chain = 0, master = 0x0, slave = 0xa0
2025-03-24 05:22:03 read version = 1
2025-03-24 05:22:04 read board name A3HB70501
2025-03-24 05:22:05 i2c chain = 1, master = 0x0, slave = 0xa2
2025-03-24 05:22:06 read version = 1
2025-03-24 05:22:06 read board name A3HB70501
2025-03-24 05:22:08 i2c chain = 2, master = 0x0, slave = 0xa4
2025-03-24 05:22:09 read version = 1
2025-03-24 05:22:09 read board name A3HB70501
2025-03-24 05:22:11 eeprom chain:0, pt1ok=1
2025-03-24 05:22:11 eeprom chain:1, pt1ok=1
2025-03-24 05:22:11 eeprom chain:2, pt1ok=1
2025-03-24 05:22:11 eeprom load ret:0
2025-03-24 05:22:11 miner type: Antminer S21 XP
2025-03-24 05:22:11 miner:A3HB70601,board_name:A3HB70501
2025-03-24 05:22:11 miner:A3HB70501,board_name:A3HB70501
2025-03-24 05:22:11 create thread get_nonce_and_register_thread
2025-03-24 05:22:11 fixed working voltage = 1370
2025-03-24 05:22:11 Chain [0] PCB Version: 0x0100
2025-03-24 05:22:11 Chain [0] BOM Version: 0x0000
2025-03-24 05:22:11 Chain [1] PCB Version: 0x0100
2025-03-24 05:22:11 Chain [1] BOM Version: 0x0000
2025-03-24 05:22:11 Chain [2] PCB Version: 0x0100
2025-03-24 05:22:11 Chain [2] BOM Version: 0x0000
2025-03-24 05:22:11 bad chain id = 3
2025-03-24 05:22:14 Fan check passed.
2025-03-24 05:22:14 init fan pid target=60
2025-03-24 05:22:14 max sensor num = 4
2025-03-24 05:22:14 swtich device addr:0xe0
2025-03-24 05:22:14 i2c chain = 0, master = 0x0, slave = 0xe0
2025-03-24 05:22:14 swtich device addr:0xe2
2025-03-24 05:22:14 i2c chain = 1, master = 0x0, slave = 0xe2
2025-03-24 05:22:14 swtich device addr:0xe4
2025-03-24 05:22:14 i2c chain = 2, master = 0x0, slave = 0xe4
2025-03-24 05:22:14 STATUS_INITED: soc init done!
2025-03-24 05:22:14 temperature_monitor_thread start...
2025-03-24 05:22:14 asic_temperature_and_voltage_monitor_thread start... Hope someone can help. Thanks and regards. |
