SoloPool.com - First Ever Miner Set Hybrid / Solo + Solo Split + Prop + Pool

[philipma1957]

Or set the primary as ny.solopool.com and the backup to stratum.solopool.com and it will automatically pick our closest live pool to you.

Either way should work!

SO the Apollo III miner is set off solo.

1st back up is ny solo pool
2nd back up is eu solo pool

And this seems to work.

Or set the primary as ny.solopool.com and the backup to stratum.solopool.com and it will automatically pick our closest live pool to you.

Either way should work!

with the Apollo III

solo on the included node is primary.

then backup 1
then backup 2


I looked at logs and it rotates out of back up 1 every once in a while to check if solo was made active.


once this new 2 bm1373 chip  hammer miner arrives I will set 1 and 2 to you with 3 to ck

https://altairtech.io/product/thor-p2-bitcoin-miner/

and set the apollo back to solo node.






I dropped out again not sure why it is happening  .

do not know if the Apollo has an issue
or the pool has an issue or
the internet service has an issue

I am going to put a different miner here for a while to see what happens

stratum+tcp://ny.solopool.com:3333
bc1q7ss6pzzj6y459tvc4lz8llkwxly7zhps6l2esm.T21one
75


stratum+tcp://eu.solopool.com:3333
bc1q7ss6pzzj6y459tvc4lz8llkwxly7zhps6l2esm.T21one
75



stratum+tcp://btc.viabtc.io:3333
worker
password



on a 1 board down clocked t21


https://www.solopool.com/user.html?addr=bc1q7ss6pzzj6y459tvc4lz8llkwxly7zhps6l2esm

so I set the Apollo III to solo on its own node

and I am only running the 1 board t21 here.


so the settings are above two to this pool and 1 to via btc.



if this runs well I will assume the Apollo does not like the solo node option shut off.

I will continue to check on this.

note the Apollo no longer running here just the 1 board t21

[philipma1957]

Or set the primary as ny.solopool.com and the backup to stratum.solopool.com and it will automatically pick our closest live pool to you.

Either way should work!

SO the Apollo III miner is set off solo.

1st back up is ny solo pool
2nd back up is eu solo pool

And this seems to work.

Or set the primary as ny.solopool.com and the backup to stratum.solopool.com and it will automatically pick our closest live pool to you.

Either way should work!

with the Apollo III

solo on the included node is primary.

then backup 1
then backup 2


I looked at logs and it rotates out of back up 1 every once in a while to check if solo was made active.


once this new 2 bm1373 chip  hammer miner arrives I will set 1 and 2 to you with 3 to ck

https://altairtech.io/product/thor-p2-bitcoin-miner/

and set the apollo back to solo node.






I dropped out again not sure why it is happening  .

do not know if the Apollo has an issue
or the pool has an issue or
the internet service has an issue

I am going to put a different miner here for a while to see what happens

stratum+tcp://ny.solopool.com:3333
bc1q7ss6pzzj6y459tvc4lz8llkwxly7zhps6l2esm.T21one
75


stratum+tcp://eu.solopool.com:3333
bc1q7ss6pzzj6y459tvc4lz8llkwxly7zhps6l2esm.T21one
75



stratum+tcp://btc.viabtc.io:3333
worker
password



on a 1 board down clocked t21


https://www.solopool.com/user.html?addr=bc1q7ss6pzzj6y459tvc4lz8llkwxly7zhps6l2esm

so I set the Apollo III to solo on its own node

and I am only running the 1 board t21 here.


so the settings are above two to this pool and 1 to via btc.



if this runs well I will assume the Apollo does not like the solo node option shut off.

I will continue to check on this.

note the Apollo no longer running here just the 1 board t21

so the t21 says I am mining and the pool say I am offline.

so this means it is not the gear. as two totally different machines gave me the same issue

a reboot fixes it

it could be an internet issue
it could be a pool issue

[philipma1957]

I did a double entry.

I understand the issue.

and the pool is wrong .

machine a   8th I shut it down the Apollo III
machine b 33th I added this

and I get a penalty

even with the hash increase

not good.

I can work around by simply doing a new addy with the second machine.

but it appears that if you run 2 machines at the pool both at 75-25

and decide to remove a machine

you get a penalty.

kind of makes mining with 2 machines a high risk if you want to split one off.

and these are 33+8th

I will add back the Apollo and see if penalty leaves.

well I went a different method to test this issue .  new btc addy here is the miner a t21 1 board set to 33th

https://www.solopool.com/user.html?addr=bc1q696ugy8fuygc3vlhycrwv7zqwv9fs9hgws235l

I will post later.

[Sledge0001]

The penalty will certainly apply if the miner goes offline. If you have 2 miners and then take one offline there will be a hashrate penalty enforced as you cut your hashrate!