Running Bitok - 0.3.19 Mainnet

[Tongpu]

Yes, that's what I did, I'm running the latest version from the webpage/github:

Code:

~$ ./bitok-0.3.19.12-x86_64 getblockcount
SHA256: Using SHA-NI hardware acceleration
CPU: 12th Gen Intel(R) Core(TM) i7-1265U
Yespower optimizations: AVX2 + SSE4.1 + SSE2
23906

Now I've tried both the GUI and CLI versions, in the GUI I finally got an error, where it said I was offline and couldn't complete the tx, both to an external adress and to an address that I also have in the GUI wallet.

Starting the bitokd downloaded from the webpage I get this version;

Code:

Bitok version 0.3.19
Debug mode: OFF
Bound to port 18333

Not sure what else I can do, why would I be "offline" for outbound txn when inbound worked?

After download you have bitokd for daemon. Run it ./bitokd -debug in one terminal tab you will see all logs you need. Wait for blockchain sync. In other tab run ./bitokd getinfo, ./bitokd sendtoaddress <address> or what you want and it will work.

[tbcrypto3]

Yes, that's what I did, I'm running the latest version from the webpage/github:

Code:

~$ ./bitok-0.3.19.12-x86_64 getblockcount
SHA256: Using SHA-NI hardware acceleration
CPU: 12th Gen Intel(R) Core(TM) i7-1265U
Yespower optimizations: AVX2 + SSE4.1 + SSE2
23906

Now I've tried both the GUI and CLI versions, in the GUI I finally got an error, where it said I was offline and couldn't complete the tx, both to an external adress and to an address that I also have in the GUI wallet.

Starting the bitokd downloaded from the webpage I get this version;

Code:

Bitok version 0.3.19
Debug mode: OFF
Bound to port 18333

Not sure what else I can do, why would I be "offline" for outbound txn when inbound worked?

After download you have bitokd for daemon. Run it ./bitokd -debug in one terminal tab you will see all logs you need. Wait for blockchain sync. In other tab run ./bitokd getinfo, ./bitokd sendtoaddress <address> or what you want and it will work.

Hmm.. well I've tried something else now, importing the key of the address with the balance, and made a new transaction, and now it is seen on the receiving side but still with 0 confirmations. I'll update if it comes through or not.



UPDATE: Transaction is going through after importing the private key of the address with balance into the web wallet, sending to another web wallet that was newly created and finally on to the final destination, confirmations are slow but they're finally coming through. I think something was wonky with the original address since it is from january and the start of the mining period.

[Tongpu]

Sadly many of us tried to do solo mining pools and failed.

shares are there, you see that you found a block, but the lastbitcoin pool found that block and not you so no rewards, happened over 5 blocks in couple of hours so the pool owner gave up.

Tried mining to my own node using my pcs to mine solo (nothing)

Tried renting a vps and uploaded the pool files, connected to it and everyone was working fine, but the ddos attacks are happening way too often to get any meaningful test, I tested 50 pcs mining to the node and in 10 hours there was also no blocks found (at speed of about 200kh).

the ONLY way I have tested and tried is to select generate from the wallet (which is alot slower than cpuminer) and found solo blocks that way.

Hell, I'd take someone's pool that offers solo mining, but in order to run more nodes we need to make sure they work, we can connect to them, and mine to them too.

I know it's gonna happen and i'm probably just one line off or something AI told me that messed up my settings.

hoping for the best and keeping up with this projects updates as it's one of the rare ones I can really enjoy being a part of.

Added solo mining at https://solo.lastbitcoin.org

Let’s see how it goes. Solo mode is currently in testing, and we need to find a block so I can verify that all systems are working correctly. 120 confirms/2% fee
UPD: block found, all systems operational



pplns still on the main https://lastbitcoin.org 12 confirms / 1% fee, nothing changed

UPDATE: Transaction is going through after importing the private key of the address with balance into the web wallet, sending to another web wallet that was newly created and finally on to the final destination, confirmations are slow but they're finally coming through. I think something was wonky with the original address since it is from january and the start of the mining period.

I still don’t understand which binary you are using. What exactly is bitok-0.3.19.12-x86_64?
When you extract the downloaded archive, it should contain bitokd (Linux) or bitokd.exe (Windows). Also, RPC responses normally do not include the message “SHA256: Using SHA-NI hardware acceleration…”

[wqy2706113]

Sadly many of us tried to do solo mining pools and failed.

shares are there, you see that you found a block, but the lastbitcoin pool found that block and not you so no rewards, happened over 5 blocks in couple of hours so the pool owner gave up.

Tried mining to my own node using my pcs to mine solo (nothing)

Tried renting a vps and uploaded the pool files, connected to it and everyone was working fine, but the ddos attacks are happening way too often to get any meaningful test, I tested 50 pcs mining to the node and in 10 hours there was also no blocks found (at speed of about 200kh).

the ONLY way I have tested and tried is to select generate from the wallet (which is alot slower than cpuminer) and found solo blocks that way.

Hell, I'd take someone's pool that offers solo mining, but in order to run more nodes we need to make sure they work, we can connect to them, and mine to them too.

I know it's gonna happen and i'm probably just one line off or something AI told me that messed up my settings.

hoping for the best and keeping up with this projects updates as it's one of the rare ones I can really enjoy being a part of.

Added solo mining at https://solo.lastbitcoin.org

Let’s see how it goes. Solo mode is currently in testing, and we need to find a block so I can verify that all systems are working correctly. 120 confirms/2% fee

https://i.ibb.co/wFJ6SC03/solo.png

pplns still on the main https://lastbitcoin.org 12 confirms / 1% fee, nothing changed
 

When will tongpu launch an event with even more generous rewards?

[Tongpu]

When will tongpu launch an event with even more generous rewards?

I'm planning something bigger)

Bitok's scripting is crazy powerful. It is perfect for on-chain games, betting and oracles. Full math, bitwise, string ops are basically fair casinos and random contracts made easy.

While Elvis handles the marketplace/P2P exch, I’m start building a casino on Bitok. We even have Payment channels that let you bet and move BITOK instantly, no waiting for blocks (just need add some RPC's).

..beginning with a P2P exchange for trading BITOK against other cryptocurrencies. No intermediaries. No centralized order books. No custodial wallets...

Elvis, toss in privacy coin pairs for p2p like Monero and Zcash, not just USDT-ERC20, that would be huge

[wqy2706113]

When will tongpu launch an event with even more generous rewards?

I'm planning something bigger)

Bitok's scripting is crazy powerful. It is perfect for on-chain games, betting and oracles. Full math, bitwise, string ops are basically fair casinos and random contracts made easy.

While Elvis handles the marketplace/P2P exch, I’m start building a casino on Bitok. We even have Payment channels that let you bet and move BITOK instantly, no waiting for blocks (just need add some RPC's).

..beginning with a P2P exchange for trading BITOK against other cryptocurrencies. No intermediaries. No centralized order books. No custodial wallets...

Elvis, toss in privacy coin pairs for p2p like Monero and Zcash, not just USDT-ERC20, that would be huge

Good news! In less than an hour, I found a block using your single-player mining tool.
Your Hashrate
4.85 KH/s
Workers
1
Blocks Found
1
Immature
49.00 BITOK
Unconfirmed blocks
Also, could you teach me how to insert images here?

[Tongpu]

Good news! In less than an hour, I found a block using your single-player mining tool.
Also, could you teach me how to insert images here?

Congrats.
You need Jr. Member rank or more to insert images

[wqy2706113]

Good news! In less than an hour, I found a block using your single-player mining tool.
Also, could you teach me how to insert images here?

Congrats.
You need Jr. Member rank or more to insert images

                      Net hash rate (est) 125.93 kh/s
[2026-03-13 02:17:30] 69 Submitted Diff 0.00017272, Block 23979, Job 12a
[2026-03-13 02:17:30] 69 Accepted 69 S0 R0 B1, 30.998 sec (233ms)
[2026-03-13 02:17:34] 70 Submitted Diff 0.00011953, Block 23979, Job 12a
[2026-03-13 02:17:34] 70 Accepted 70 S0 R0 B1, 4.013 sec (240ms)
[2026-03-13 02:17:52] 71 Submitted Diff 0.015503, Block 23979, Job 12a
[2026-03-13 02:17:53] 71 A71 S0 R0 BLOCK SOLVED 2, 18.281 sec (240ms)
[2026-03-13 02:17:58] New Work: Block 23979, Tx 0, Netdiff 0.0072712, Job 12b
                      Diff: Net 0.0072712, Stratum 2.9412, Target 4.4879e-05

I obtained one block each at 23979 and 23976, but they are not displayed on the solo webpage.

My first block was mined at height 23976, but Coinbase points to the wallet: 15hRoaxAZvYtxmQdYLrjrJ4CEQV3WfhqAS.

Similarly, I also mined a block at height 23979, which also points to 15hRoaxAZvYtxmQdYLrjrJ4CEQV3WfhqAS.

This seems to be the wallet of that mining pool?

Good news! In less than an hour, I found a block using your single-player mining tool.
Also, could you teach me how to insert images here?

Congrats.
You need Jr. Member rank or more to insert images

                      Net hash rate (est) 125.93 kh/s
[2026-03-13 02:17:30] 69 Submitted Diff 0.00017272, Block 23979, Job 12a
[2026-03-13 02:17:30] 69 Accepted 69 S0 R0 B1, 30.998 sec (233ms)
[2026-03-13 02:17:34] 70 Submitted Diff 0.00011953, Block 23979, Job 12a
[2026-03-13 02:17:34] 70 Accepted 70 S0 R0 B1, 4.013 sec (240ms)
[2026-03-13 02:17:52] 71 Submitted Diff 0.015503, Block 23979, Job 12a
[2026-03-13 02:17:53] 71 A71 S0 R0 BLOCK SOLVED 2, 18.281 sec (240ms)
[2026-03-13 02:17:58] New Work: Block 23979, Tx 0, Netdiff 0.0072712, Job 12b
                      Diff: Net 0.0072712, Stratum 2.9412, Target 4.4879e-05

I obtained one block each at 23979 and 23976, but they are not displayed on the solo webpage.

Good news! In less than an hour, I found a block using your single-player mining tool.
Also, could you teach me how to insert images here?

Congrats.
You need Jr. Member rank or more to insert images

I immediately rented a VPS and found another block:

Net hash rate (est) 66.16 kh/s

[2026-03-13 02:08:26] 39 Submitted Diff 0.00010085, Block 23976, Job 11f

[2026-03-13 02:08:27] 39 Accepted 39 S0 R0 B1, 56.253 sec (239ms)

[2026-03-13 02:09:07] 40 Submitted Diff 0.00012353, Block 23976, Job 11f

[2026-03-13 02:09:07] 40 Accepted 40 S0 R0 B1, 40.784 sec (239ms)

[2026-03-13 02:09:07] yespower: stratum+tcp://solo.lastbitcoin.org:3032

Periodic Report 5m21s 8m39s

Share rate 2.62/min 4.62/min

Hash rate 11.43kh/s 12.12kh/s (12.27kh/s)

Submitted 14 40

Accepted 14 40 100.0%

Blocks Solved 1 1

Hi/Lo Share Diff 0.021167 / 7.1589e-05

[2026-03-13 02:09:16] CPU temp: curr 0 C max 0, Freq: 0.000/0.000 GHz

However, the webpage doesn't display this. Will this affect my earnings?

Code:

[2026-03-13 02:43:50] 168 Submitted Diff 0.0073053, Block 23984, Job 149
[2026-03-13 02:43:50] 168 A167 S1 R0 BLOCK SOLVED 4, 11.634 sec (233ms)
[2026-03-13 02:43:58] 169 Submitted Diff 6.7848e-05, Block 23984, Job 149
[2026-03-13 02:43:58] 169 Accepted 168 S1 R0 B4, 7.707 sec (241ms)
[2026-03-13 02:44:03] New Work: Block 23984, Tx 0, Netdiff 0.0072712, Job 14a
                      Diff: Net 0.0072712, Stratum 2.1347, Target 3.2573e-05
                      TTF @ 10.61 kh/s: Block 49m02s, Share 13s
                      Net hash rate (est) 107.69 kh/s
[2026-03-13 02:44:15] 170 Submitted Diff 0.00043982, Block 23984, Job 14a
[2026-03-13 02:44:15] 170 Accepted 169 S1 R0 B4, 17.265 sec (239ms)
[2026-03-13 02:44:22] 171 Submitted Diff 3.5136e-05, Block 23984, Job 14a
[2026-03-13 02:44:23] 171 Accepted 170 S1 R0 B4, 7.087 sec (240ms)
[2026-03-13 02:44:34] 172 Submitted Diff 3.6277e-05, Block 23984, Job 14a
[2026-03-13 02:44:34] 172 Accepted 171 S1 R0 B4, 11.591 sec (241ms)
[2026-03-13 02:44:35] 173 Submitted Diff 6.9845e-05, Block 23984, Job 14a
[2026-03-13 02:44:36] 173 Accepted 172 S1 R0 B4, 1.573 sec (235ms)

Look, I've solved a block, but it's still stuck here for half a minute.

[tbcrypto3]

UPDATE: Transaction is going through after importing the private key of the address with balance into the web wallet, sending to another web wallet that was newly created and finally on to the final destination, confirmations are slow but they're finally coming through. I think something was wonky with the original address since it is from january and the start of the mining period.

I still don’t understand which binary you are using. What exactly is bitok-0.3.19.12-x86_64?
When you extract the downloaded archive, it should contain bitokd (Linux) or bitokd.exe (Windows). Also, RPC responses normally do not include the message “SHA256: Using SHA-NI hardware acceleration…”

That particular binary is the AppImage binary, but I also tried with bitokd from the same version. What made it work for me was importing the private key of the mining address into the web wallet then perform my actions from there.

[wqy2706113]

Code:

[2026-03-13 02:43:50] 168 Submitted Diff 0.0073053, Block 23984, Job 149
[2026-03-13 02:43:50] 168 A167 S1 R0 BLOCK SOLVED 4, 11.634 sec (233ms)
[2026-03-13 02:43:58] 169 Submitted Diff 6.7848e-05, Block 23984, Job 149
[2026-03-13 02:43:58] 169 Accepted 168 S1 R0 B4, 7.707 sec (241ms)
[2026-03-13 02:44:03] New Work: Block 23984, Tx 0, Netdiff 0.0072712, Job 14a
                      Diff: Net 0.0072712, Stratum 2.1347, Target 3.2573e-05
                      TTF @ 10.61 kh/s: Block 49m02s, Share 13s
                      Net hash rate (est) 107.69 kh/s
[2026-03-13 02:44:15] 170 Submitted Diff 0.00043982, Block 23984, Job 14a
[2026-03-13 02:44:15] 170 Accepted 169 S1 R0 B4, 17.265 sec (239ms)
[2026-03-13 02:44:22] 171 Submitted Diff 3.5136e-05, Block 23984, Job 14a
[2026-03-13 02:44:23] 171 Accepted 170 S1 R0 B4, 7.087 sec (240ms)
[2026-03-13 02:44:34] 172 Submitted Diff 3.6277e-05, Block 23984, Job 14a
[2026-03-13 02:44:34] 172 Accepted 171 S1 R0 B4, 11.591 sec (241ms)
[2026-03-13 02:44:35] 173 Submitted Diff 6.9845e-05, Block 23984, Job 14a
[2026-03-13 02:44:36] 173 Accepted 172 S1 R0 B4, 1.573 sec (235ms)

Look, I've solved a block, but it's still stuck here for half a minute.

I know the reason: Count mismatch: 21, stats may be inaccurate. Is there a problem with the mining pool settings?

[Tongpu]

I know the reason: Count mismatch: 21, stats may be inaccurate. Is there a problem with the mining pool settings?

Stop spamming mining logs here please. Pool support: https://bitcointalk.org/index.php?topic=5572258.20

The solo pool is working correctly. All real solved blocks are shown in the web UI because the pool validates them against the actual network target. cpuminer’s yespower uses its own difficulty/target calculation and dont match the BitoPoW difficulty target.

Solved block in cpuminer doesn’t mean solved block on Bitok blockchain.

My first block was mined at height 23976, but Coinbase points to the wallet: 15hRoaxAZvYtxmQdYLrjrJ4CEQV3WfhqAS.

Similarly, I also mined a block at height 23979, which also points to 15hRoaxAZvYtxmQdYLrjrJ4CEQV3WfhqAS.

This seems to be the wallet of that mining pool?

15hRoaxAZvYtxmQdYLrjrJ4CEQV3WfhqAS - this is PPLNS pool wallet.
Solo pool wallet 1JrzLAcWgdbs8C3adfwCVTciT1zoVjXBhF.

If you see 15hR... this mean block found by pplns pool not by solo pool (they are not connected)
In a solo pool you are still submitting shares that the pool validates, just like in any other pool. The difference is only in the payout method.

[elvisjedusor]

That particular binary is the AppImage binary, but I also tried with bitokd from the same version. What made it work for me was importing the private key of the mining address into the web wallet then perform my actions from there.

RPC designed for the daemon, not the GUI (AppImage is GUI wallet). GUI process could freeze or crash, interrupting RPC. Use bitokd daemon for RPC.