heslo
Legendary

Activity: 1373
Merit: 1408
|
 |
October 15, 2026, 04:01:28 AM |
|
I've found the same loop on the full Apollo version when I received it. Since I was waiting for my new Nvme drive, I set the miner to an external pool and stopped the node but on the logs I could see all the retries to start the node which I've found weird and unecessary since no Nvme drive on the unit and Node was stopped.
For sure this is way less an issue on the full version since it is supposed to have the node turned ON but yeah a fix would be nice to don't see all thoses retries while the node is stopped.
This is because majority of units have shipped with the full node controller, next update will disable this if no nvme drive is installed. Either way it's just a log artifact. We should have 2.1.4 out next week with unified Solo Node and Apollo III kernels/image, which lays the groundwork for our major 2.2 update. Lots of cool things in here including dual NVMe support, scheduled miner settings, support for Apollo III devices to mine to multiple pools at once and finally a fool proof and working upgrade system that wont break. Scheduled mining is EXACTLY what I'm waiting for! If you need testers, reach out 
|
|
|
|
|
|
crypto_curious
|
 |
October 25, 2026, 01:49:38 AM |
|
I've extracted mining files and wrote service of my own, similarly what I did with Apollo II two years ago (I've even shared my project files on gitlab). Now my apollo 3 is fully temperature controlled. Sitting in external enclosure outdoors, it's heating home storage battery when heat is needed (usually at night), or working normally during the day. A lot of fun coding it!
|
|
|
|
|
heslo
Legendary

Activity: 1373
Merit: 1408
|
 |
October 26, 2026, 02:47:46 AM |
|
I've extracted mining files and wrote service of my own, similarly what I did with Apollo II two years ago (I've even shared my project files on gitlab). Now my apollo 3 is fully temperature controlled. Sitting in external enclosure outdoors, it's heating home storage battery when heat is needed (usually at night), or working normally during the day. A lot of fun coding it!
That's really cool man, well done!
|
|
|
|
|
Black_Onyx
Newbie

Activity: 6
Merit: 3
|
 |
October 27, 2026, 09:04:37 PM |
|
|
|
|
|
|
Black_Onyx
Newbie

Activity: 6
Merit: 3
|
 |
November 13, 2026, 04:05:36 PM Last edit: November 13, 2026, 06:21:23 PM by Black_Onyx |
|
I've found the same loop on the full Apollo version when I received it. Since I was waiting for my new Nvme drive, I set the miner to an external pool and stopped the node but on the logs I could see all the retries to start the node which I've found weird and unecessary since no Nvme drive on the unit and Node was stopped.
For sure this is way less an issue on the full version since it is supposed to have the node turned ON but yeah a fix would be nice to don't see all thoses retries while the node is stopped.
This is because majority of units have shipped with the full node controller, next update will disable this if no nvme drive is installed. Either way it's just a log artifact. We should have 2.1.4 out next week with unified Solo Node and Apollo III kernels/image, which lays the groundwork for our major 2.2 update. Lots of cool things in here including dual NVMe support, scheduled miner settings, support for Apollo III devices to mine to multiple pools at once and finally a fool proof and working upgrade system that wont break. Any news on firmware update? Just like on the Miner tab—where restarting the miner resets the counters to zero—would it be possible to have the counters on the Solo Pool tab reset to zero when the pool is restarted? I also noticed that the Solo Pool icon on the top right in the overview tab and the 'Active' status under "Solo Mining Users" on solo pool tab stop updating when I navigate away from the main GUI page and return later. Refreshing the page resolves the issue, and it seems to happen only with the Solo Pool. https://i.postimg.cc/28nyszD5/Screenshot-2026-11-13-at-19-15-54.pnghttps://i.postimg.cc/NjpstFPh/Screenshot-2026-11-13-at-19-16-18.pnghttps://i.postimg.cc/TYxfWgZ7/Screenshot-2026-11-13-at-19-16-36.png
|
|
|
|
|
dlwittsr
Newbie

Activity: 3
Merit: 0
|
 |
November 17, 2026, 02:38:38 AM |
|
An apollo III standard integration for Home Assistant. https://github.com/DoubleDoc/ha-futurebit-apollo-iii-standardStandard (or at least just the miner part) support only. Spent some time on capturing errors from the log since we experienced the miner slowly flaking out. Hope this helps someone.
|
|
|
|
|
heslo
Legendary

Activity: 1373
Merit: 1408
|
 |
November 17, 2026, 03:25:02 AM |
|
Helps me, I was asking for it for some time! Thank you 
|
|
|
|
|
dlwittsr
Newbie

Activity: 3
Merit: 0
|
 |
November 17, 2026, 04:04:47 AM |
|
Apollo III Standard power modes, measuredOne miner, 21 chips, Web OS 2.1.3. Sampled every 15 s from the miner API; steady state is the average after warm-up. | Mode | Chip clock | Hashrate | Power | J/TH | Max chip temp | Fan PWM | Stable after | | Super ECO | 409 MHz | 8.0 TH/s | 91 W | 11.3 | 56 °C | 14% | 190 s | | Eco | 614 MHz | 12.1 TH/s | 166 W | 13.7 | 65 °C | 28% | 220 s | | Balanced | 767 MHz | 15.2 TH/s | 243 W | 16.0 | 73 °C | 47% | 241 s | | Turbo | 921 MHz | 18.2 TH/s | 340 W | 18.6 | 81 °C | 100% | 300 s |
- The osc value in the miner stats is the chip clock in MHz, fixed by the preset. Every mode does about 930-945 hashes per clock per chip.
- Every start has a burst of chip errors (66-93%) that clears within about 3-5 minutes.
- Turbo runs the fan at 100%; in my run the chips peaked at 90 °C during warm-up.
Full data: Measured power modes (FutureBit Apollo III Standard integration for Home Assistant)
|
|
|
|
|
jstefanop (OP)
Legendary

Activity: 2267
Merit: 1429
|
 |
November 18, 2026, 01:40:08 AM |
|
Apollo III Standard power modes, measuredOne miner, 21 chips, Web OS 2.1.3. Sampled every 15 s from the miner API; steady state is the average after warm-up. | Mode | Chip clock | Hashrate | Power | J/TH | Max chip temp | Fan PWM | Stable after | | Super ECO | 409 MHz | 8.0 TH/s | 91 W | 11.3 | 56 °C | 14% | 190 s | | Eco | 614 MHz | 12.1 TH/s | 166 W | 13.7 | 65 °C | 28% | 220 s | | Balanced | 767 MHz | 15.2 TH/s | 243 W | 16.0 | 73 °C | 47% | 241 s | | Turbo | 921 MHz | 18.2 TH/s | 340 W | 18.6 | 81 °C | 100% | 300 s |
- The osc value in the miner stats is the chip clock in MHz, fixed by the preset. Every mode does about 930-945 hashes per clock per chip.
- Every start has a burst of chip errors (66-93%) that clears within about 3-5 minutes.
- Turbo runs the fan at 100%; in my run the chips peaked at 90 °C during warm-up.
Full data: Measured power modes (FutureBit Apollo III Standard integration for Home Assistant) Nice results, FYI 2.1.4 has lots of firmware fixes and more stable tunes across all modes (on average they land about 5% more efficient, and Balanced should land under 15w/TH and Turbo ~17!
|
|
|
|
heslo
Legendary

Activity: 1373
Merit: 1408
|
 |
November 18, 2026, 02:43:56 AM |
|
Apollo III Standard power modes, measuredOne miner, 21 chips, Web OS 2.1.3. Sampled every 15 s from the miner API; steady state is the average after warm-up. | Mode | Chip clock | Hashrate | Power | J/TH | Max chip temp | Fan PWM | Stable after | | Super ECO | 409 MHz | 8.0 TH/s | 91 W | 11.3 | 56 °C | 14% | 190 s | | Eco | 614 MHz | 12.1 TH/s | 166 W | 13.7 | 65 °C | 28% | 220 s | | Balanced | 767 MHz | 15.2 TH/s | 243 W | 16.0 | 73 °C | 47% | 241 s | | Turbo | 921 MHz | 18.2 TH/s | 340 W | 18.6 | 81 °C | 100% | 300 s |
- The osc value in the miner stats is the chip clock in MHz, fixed by the preset. Every mode does about 930-945 hashes per clock per chip.
- Every start has a burst of chip errors (66-93%) that clears within about 3-5 minutes.
- Turbo runs the fan at 100%; in my run the chips peaked at 90 °C during warm-up.
Full data: Measured power modes (FutureBit Apollo III Standard integration for Home Assistant) Nice results, FYI 2.1.4 has lots of firmware fixes and more stable tunes across all modes (on average they land about 5% more efficient, and Balanced should land under 15w/TH and Turbo ~17! Awesome! Any ETA?
|
|
|
|
|
FP91G
Legendary

Activity: 2562
Merit: 1753
🧙♂️ #kycfree
|
 |
November 18, 2026, 09:54:26 AM |
|
Apollo III Standard power modes, measuredOne miner, 21 chips, Web OS 2.1.3. Sampled every 15 s from the miner API; steady state is the average after warm-up. | Mode | Chip clock | Hashrate | Power | J/TH | Max chip temp | Fan PWM | Stable after | | Super ECO | 409 MHz | 8.0 TH/s | 91 W | 11.3 | 56 °C | 14% | 190 s | | Eco | 614 MHz | 12.1 TH/s | 166 W | 13.7 | 65 °C | 28% | 220 s | | Balanced | 767 MHz | 15.2 TH/s | 243 W | 16.0 | 73 °C | 47% | 241 s | | Turbo | 921 MHz | 18.2 TH/s | 340 W | 18.6 | 81 °C | 100% | 300 s |
- The osc value in the miner stats is the chip clock in MHz, fixed by the preset. Every mode does about 930-945 hashes per clock per chip.
- Every start has a burst of chip errors (66-93%) that clears within about 3-5 minutes.
- Turbo runs the fan at 100%; in my run the chips peaked at 90 °C during warm-up.
Full data: Measured power modes (FutureBit Apollo III Standard integration for Home Assistant) Super ECO results in too low a hashrate, while Turbo leads to excessively high temperatures; that leaves a choice between Eco and Balanced. You could use Balanced during colder weather and switch to Eco in the summer. Personally, I don’t like to see these chips heat up beyond 70 degrees Celsius. Keeping them within that limit will help the device last longer.
|
|
|
|
jstefanop (OP)
Legendary

Activity: 2267
Merit: 1429
|
 |
November 18, 2026, 10:02:54 PM |
|
Apollo III Standard power modes, measuredOne miner, 21 chips, Web OS 2.1.3. Sampled every 15 s from the miner API; steady state is the average after warm-up. | Mode | Chip clock | Hashrate | Power | J/TH | Max chip temp | Fan PWM | Stable after | | Super ECO | 409 MHz | 8.0 TH/s | 91 W | 11.3 | 56 °C | 14% | 190 s | | Eco | 614 MHz | 12.1 TH/s | 166 W | 13.7 | 65 °C | 28% | 220 s | | Balanced | 767 MHz | 15.2 TH/s | 243 W | 16.0 | 73 °C | 47% | 241 s | | Turbo | 921 MHz | 18.2 TH/s | 340 W | 18.6 | 81 °C | 100% | 300 s |
- The osc value in the miner stats is the chip clock in MHz, fixed by the preset. Every mode does about 930-945 hashes per clock per chip.
- Every start has a burst of chip errors (66-93%) that clears within about 3-5 minutes.
- Turbo runs the fan at 100%; in my run the chips peaked at 90 °C during warm-up.
Full data: Measured power modes (FutureBit Apollo III Standard integration for Home Assistant) Nice results, FYI 2.1.4 has lots of firmware fixes and more stable tunes across all modes (on average they land about 5% more efficient, and Balanced should land under 15w/TH and Turbo ~17! Awesome! Any ETA? Trying to get it out before thanksgiving.
|
|
|
|
|