What could be the problem

[hmbdofficial]

I started runing a node few days back and it was synchronising fast with an internet speed of approximately 20mbps. But today the internet is better so I was expecting it to be faster considering I’m having about 90mbps as the internet speed but the verification progress per hour is dropping as compared to when I was having lesser internet speed Wch is making the progress slow. what could be the problem?

[LoyceV]

the verification progress per hour is dropping

That's normal: as chainstate grows, syncing becomes more demanding on your hardware. Get enough RAM (16 GB is the minimum for a smooth sync) and set dbcache to a high enough value (but not all your RAM).

[hmbdofficial]

dbcache[/tt] to a high enough value (but not all your RAM).

How do i set the dbcache to a high value?

[LoyceV]

How do i set the dbcache to a high value?

If you can't check the GUI Options or Google this, you should probably not be running Bitcoin Core.

[hmbdofficial]

How do i set the dbcache to a high value?

If you can't check the GUI Options or Google this, you should probably not be running Bitcoin Core.

I’ve actually set it to 3000 it’s was 450 thank you.

[nc50lc]

-snip- But today the internet is better so I was expecting it to be faster considering I’m having about 90mbps as the internet speed but the verification progress per hour is dropping as compared to when I was having lesser internet speed Wch is making the progress slow. what could be the problem?

If you're comparing it with the earliest blocks when you just started syncing, that's because the majority of those are nearly empty blocks.

And heads-up, once its nearing the tip of the blockchain, it'll even get slower as your node starts to verify all of the scripts in the block that's skipped in the older block heights.
Currently, it's after block height 912683 (ref: /v30.2/src/kernel/chainparams.cpp#L122)

I’ve actually set it to 3000 it’s was 450 thank you.

Have you considered this setting based from your free memory?
Because an improperly set value of this could even worsen your disk's performance if it makes your machine to use "swap memory".

[hmbdofficial]

How do i set the dbcache to a high value?

If you can't check the GUI Options or Google this, you should probably not be running Bitcoin Core.

I love this reply. So often people want to be bottle-fed and it astounds me. We live in a world now where you dont even have to look through the documentation to find an answer. AI is at everyone's fingertips (literal spoonfeeding) and yet still, people want to be bottle-fed.

May be you should be careful with the use of AI in finding solutions to technical issues, you think I don’t know there  was AI before I asked the question here ? AI could even cause you more problems because he might not understand what you’re saying since it has no experience in running a node. But a lot of people here have that Thats to tell you that I believe  more of the people guide here more that the AI. Most time AI could just gather garbage  and give to you that why i Always ask anything that has to do with technical here and I believe that was the essence of this forum.

[Agbe]

I started runing a node few days back and it was synchronising fast with an internet speed of approximately 20mbps. But today the internet is better so I was expecting it to be faster considering I’m having about 90mbps as the internet speed but the verification progress per hour is dropping as compared to when I was having lesser internet speed Wch is making the progress slow. what could be the problem?

That should be hardware issue. You have to check the RAM and the HDD. Lower RAM can also make it slows as the downloading progresses. And if the harddisk is getting full, it will make it slows. These are some of the possible thing that can make your downloading slows. And if they are the cause, you have to upgrade the RAM, and remove some of the things in the storage to free it.

[JetSeason]

Hey! Internet speed isn’t always the bottleneck for node syncing. Even with faster bandwidth, your node can slow down if it’s doing more verification work, like checking blocks or processing UTXOs. CPU, disk speed (especially SSD vs HDD), and memory often matter more than raw Mbps.

[xiamin]

I started runing a node few days back and it was synchronising fast with an internet speed of approximately 20mbps. But today the internet is better so I was expecting it to be faster considering I’m having about 90mbps as the internet speed but the verification progress per hour is dropping as compared to when I was having lesser internet speed Wch is making the progress slow. what could be the problem?

Even if your internet speed is very high, the device must have the capacity to handle that speed. If your device is weak, it will not work properly. Or any other device in your house that is connected to the internet may also experience a slowdown. To sync the node dynamically, disconnect other device connections. If any other device is running, the sync will work but the speed may be slightly reduced.

[BitMaxz]

Hey! Internet speed isn’t always the bottleneck for node syncing. Even with faster bandwidth, your node can slow down if it’s doing more verification work, like checking blocks or processing UTXOs. CPU, disk speed (especially SSD vs HDD), and memory often matter more than raw Mbps.

Actually, the internet also gives you a "hard bottleneck." Even if you have good PC specs (SSD, 32 GB of RAM, and CPU with 2mbps of internet speed), expect the syncing process to be slow.
So you should check the internet speed first because that is the first requirement before upgrading your node with a better RAM and SSD.

[philipma1957]

You need a fairly empty 2tb ssd.
You need 16gb ram
You need an Intel i5 8th Gen or better.
You need a good ethernet port on your machine

A 90mb internet connect is okay but not great.


Even with all above you may not have a good node to down load from.


I have a Mac studio with 36gb ram an m4 cpu 10gb internet port a 4tb ssd empty like 200gb on it.

My tested Internet speed is 1g

But most of my download speed is 50 to  85  mostly due to the peer I connect to so if you really can do speeds like 90

You need a fast peer to connect to.

Try stopping the download wait a minute or 2 then start again

This is  assuming

The  cpu the ram the ssd are good

[MarryWithBTC]

I started runing a node few days back and it was synchronising fast with an internet speed of approximately 20mbps. But today the internet is better so I was expecting it to be faster considering I’m having about 90mbps as the internet speed but the verification progress per hour is dropping as compared to when I was having lesser internet speed Wch is making the progress slow. what could be the problem?

This has been explained to you, but to add: Early in the IBD, your node was downloading data, which is where the internet speed alone matters much but later on when synchronization progressed, the node began to verify blocks and transactions. At this time, the load went to the CPU. Can you mention your set up or confirm that the synch was successful.

My tested Internet speed is 1g

But most of my download speed is 50 to  85  mostly due to the peer I connect to so if you really can do speeds like 90

For real?
Are you operating a data center?

Even if 1gb test speed doesn't equal 1gb in real download, I still think it's an overkill. A 100Mbps can efficiently handle the task

[BitMaxz]

For real?
Are you operating a data center?

Even if 1gb test speed doesn't equal 1gb in real download, I still think it's an overkill. A 100Mbps can efficiently handle the task

Before there was no 1 Gb internet speed, but nowadays it exists. In my rented house we have an internet speed of 700mbps,. If we downgrade to 100mbps I am sure my sons will complain about the slow internet and ping spikes.
However, 100mbps should be enough to download blocks and necessary files when syncing; it's not a bottleneck even I think 50mbps is enough.
If 50mbps didn't help you speed up the syncing process, then the issue is not the internet; it's your hardware specs, but having an SSD is a huge improvement.

[philipma1957]

I started runing a node few days back and it was synchronising fast with an internet speed of approximately 20mbps. But today the internet is better so I was expecting it to be faster considering I’m having about 90mbps as the internet speed but the verification progress per hour is dropping as compared to when I was having lesser internet speed Wch is making the progress slow. what could be the problem?

This has been explained to you, but to add: Early in the IBD, your node was downloading data, which is where the internet speed alone matters much but later on when synchronization progressed, the node began to verify blocks and transactions. At this time, the load went to the CPU. Can you mention your set up or confirm that the synch was successful.

My tested Internet speed is 1g

But most of my download speed is 50 to  85  mostly due to the peer I connect to so if you really can do speeds like 90

For real?
Are you operating a data center?

Even if 1gb test speed doesn't equal 1gb in real download, I still think it's an overkill. A 100Mbps can efficiently handle the task

50usd for 300mbs
65usd for 1gb

You are  correct i do not need the 1gb.

And the only way it speeds up my node download is if I connect to a node with 1gb speed.

But I do a lot of Internet in the home so I pay the extra for that speed.

[Livingleged]

You need a fairly empty 2tb ssd.

Im currently running a node with a 1tb ssd system and  it’s pretty fast enough

You need 16gb ram

A system with a ram of 8gb should be equal to the task 16gb will be better but I think it’s over stretched.

You need an Intel i5 8th Gen or better.

Absolutely true, this specification should be the minimum for a fast setup

Even with all above you may not have a good node to down load from.

True if the nodes you’re peering with are not very fast in relaying information/ data to your node you might actually experience slower progress therefore for it is very true that the peers you’re connected to are also a factor that determines the speed of your download.

Try stopping the download wait a minute or 2 then start again

I do that always and it worked for me Infact I’m running a full node currently and I can tell it’s what I do when it’s lagging.

[nc50lc]

You need 16gb ram

A system with a ram of 8gb should be equal to the task 16gb will be better but I think it’s over stretched.

You must be talking about the system's performance, in which case, can be true in most OS.

But for a Bitcoin Node, 8GB isn't as good as 16GB.
Since the current discussion is about "to sync as fast as it can", it's more efficient if the whole UTXO-set can be stored in the cache which isn't possible with 8GB of RAM.
That way, it wont have to partake to one of the biggest bottleneck which is disk I/O.

Although if the dbcache config isn't touched or set to a low value, you may not see the benefit of having a higher RAM.
E.g.: Two systems (8 & 16 GB RAM) with dbcache of 4GB or set to default, the performance may be similar if there are no other running programs.

[LoyceV]

If we downgrade to 100mbps I am sure my sons will complain about the slow internet and ping spikes.

You know online games worked through telephone modems too, right? It may be an unpopular opinion, but I think high internet speeds are overrated.

If 50mbps didn't help you speed up the syncing process, then the issue is not the internet; it's your hardware specs, but having an SSD is a huge improvement.

Even at 10 Mbit/s, it only takes a week to fully sync Bitcoin Core from scratch. The only limitation is countries where bandwidth is limited.

50usd for 300mbs
65usd for 1gb

You pay for the hype

But I do a lot of Internet in the home so I pay the extra for that speed.

We're at 70 Mbit/s, and 99% of the time that's not a limitation. I just checked: each "step" faster costs only a few euro per month extra. That's because most people don't use more bandwidth if their internet speed gets 10 times faster.

But for a Bitcoin Node, 8GB isn't as good as 16GB.
Since the current discussion is about "to sync as fast as it can", it's more efficient if the whole UTXO-set can be stored in the cache which isn't possible with 8GB of RAM.

With 8GB RAM, my system wrote many TB of data to my disk during sync. My SSD (not NVMe) was the bottleneck last time I tried.

Although if the dbcache config isn't touched or set to a low value, you may not see the benefit of having a higher RAM.
E.g.: Two systems (8 & 16 GB RAM) with dbcache of 4GB or set to default, the performance may be similar if there are no other running programs.

I highly doubt that. I expect Linux standard disk cache to fully use that extra 8 GB RAM. I'd test it, but I kinda don't want to write an additional 10+ TB to my spare laptop with 8 GB RAM and small SSD. That severly limits its lifespan.

[ABCbits]

Although if the dbcache config isn't touched or set to a low value, you may not see the benefit of having a higher RAM.
E.g.: Two systems (8 & 16 GB RAM) with dbcache of 4GB or set to default, the performance may be similar if there are no other running programs.

I highly doubt that. I expect Linux standard disk cache to fully use that extra 8 GB RAM. I'd test it, but I kinda don't want to write an additional 10+ TB to my spare laptop with 8 GB RAM and small SSD. That severly limits its lifespan.

Someone already test it on 32GB RAM system, https://blog.lopp.net/effects-dbcache-size-bitcoin-node-sync-speed/. In short, OS caching work great. But setting higher dbcache allow somewhat faster sync speed.