SoloFury ⚡ Multi-Coin SHA-256 Solo Mining Pool | BCH BTC BC2 BCH2 XEC | 1% Fee

[SoloFury]

I created another test port, port 8083, can you test it and tell me if the ping improves?
No it doesn't work, I'm evaluating alternative solutions

[Nexus9090]

I created another test port, port 8083, can you test it and tell me if the ping improves?
No it doesn't work, I'm evaluating alternative solutions

Hi Rolando,

I tried uk-bc2.solofury.com : 8083

Unfortunately the Bitaxe would not connect at all and eventually it rolled onto the fallback pool setting.

I've returned it onto 8080 for now.

Thanks for continuing to look at it, unless you've lots of people reporting the same problem, don't worry and spend too much time looking into it.

Thanks for your help.

Garry.

[SoloFury]

Hi, check your ping.
It should be improved. I've tried various tests, but to no avail. I was thinking about managing the ports with paid services in the future, but I haven't done so yet.
But given your problem, I thought others might have the same problem.
I took this paid service and optimized the connections on all the ports. Your ping should be significantly improved, I think equivalent to eusolo.ckpool. You can try it and let me know.
The optimization was performed on all stratum addresses and ports that use all the coins on solofury, so the improvement should be visible from any location you connect to.

Good luck mining!

Rolando

[Nexus9090]

Hi, check your ping.
It should be improved. I've tried various tests, but to no avail. I was thinking about managing the ports with paid services in the future, but I haven't done so yet.
But given your problem, I thought others might have the same problem.
I took this paid service and optimized the connections on all the ports. Your ping should be significantly improved, I think equivalent to eusolo.ckpool. You can try it and let me know.
The optimization was performed on all stratum addresses and ports that use all the coins on solofury, so the improvement should be visible from any location you connect to.

Good luck mining!

Rolando

Hi Rolando,

Wow big improvement, that's much better I'm seeing 19mS-22mS to your BC2 pool now.

Thanks for your work getting this fixed,

Cheers and good luck

Mine on!

[SoloFury]

Perfect, I'm very pleased.
The new implementation is for all pools in all regions.
If you have time, you can also test the other coins to see if they all perform at this speed.

In the meantime, thank you for your help.

I hope you find a block soon.
Happy mining!
Rolando

[Nexus9090]

Perfect, I'm very pleased.
The new implementation is for all pools in all regions.
If you have time, you can also test the other coins to see if they all perform at this speed.

In the meantime, thank you for your help.

I hope you find a block soon.
Happy mining!
Rolando

Happy to help

I'm out of sunlight for today, but I'll run one of my OctAxe's up on your BTC pool tomorrow to see how it goes. Unfortunately I don't have wallets for the others.

Many Thanks

Garry

[Nexus9090]

OK I've tried your BTC pool and the results are an impressive 11-13mS on average.

Excellent improvement...

Mine on!

[SoloFury]

I'm very happy about it. I hope you have a good experience.
I still have to thank you for the help you've given me so far.
I'm preparing a new upgrade. The miner page has a lot of information about overall mining. But I'd like to have as much information for each individual miner connected.
I'm working on a new upgrade soon.

In the meantime, I wish you good mining.

Rolando

[SoloFury]

New Upgrade.

A new extension for super-detailed information for each worker, including automatic miner location recognition.
If you have a nerdqaxe at home, you could have an s21 miner hosted on the other side of the world! All collected data is visible only to the address owner.

To safeguard the data, it is automatically deleted from the database every 24 hours (or more if needed for a longer graph).


https://i.postimg.cc/xJWj8SLh/solofury.jpg

[Nexus9090]

New Upgrade.

A new extension for super-detailed information for each worker, including automatic miner location recognition.
If you have a nerdqaxe at home, you could have an s21 miner hosted on the other side of the world! All collected data is visible only to the address owner.

To safeguard the data, it is automatically deleted from the database every 24 hours (or more if needed for a longer graph).

This looks really good.

I wonder, in the share rhythm section, would it be possible to indicate the start of a new block with a diamond or some other marker?

I've often seen patterns emerge with miners doing well for the first few minutes after a new block is pushed onto the network and then diminishing share values following. It'd be nice to see it graphically presented just to prove my theory.

Anyway, nice work. I really like the look and feel of the UI you've built.

Mine on!

[SoloFury]

Thanks for the advice,
I'm starting to think about how to integrate the start and end times.

Thanks, I'm glad you like it.

Rolando