[ANN] AIDEN | 1st to use sCrypt-OG (GPU Optimized) [v0.10.2.2 Released 7/10/15]

[ozie]

But this isnt sha3 or blake256, this is scrypt-nfactor-6

or like ghostlander would say.

Its N=5+1

Both new Algos which where worth mining when the came out fresh.
Your "scrypt-ng" or "scrypt-n6" or whatever you want to call it is NOT new.

Just changing a variable does not make it unique in any way.

Vertcoin also "just" changed the n-Factor. But they have a purpose behind this change.
That is another thing your are lacking!

There is a purpose behind the change, to make scrypt hash better for gpu's.

Changing memory requirements on scrypt to meet certain needs is not new, you are correct. I admit using scrypt with default settings isnt terribly innovative.. considering no one else has done it. YAC however did have nfactor 6 mining for some time though, but it wasnt a fixed n parameter like with Aiden. You can either mine it or dont. The options are pretty binary for you right now lol.

In which way exactly does your change make scrypt hash better for gpu's? All your arguments so far got ripped to pieces within minutes.

Scrypt-Jane does not change the N-Factor of Scrypt. As inventor of a new algo you should know that.

I just hope not as many people get fucked with this shitty coin then with Frankocoin. Seeing what a simple minded dev is behind all this crap i am glad i will never mine of of this shitcoin.

[1715500767]

1715500767

[1715500767]

1715500767

[defaced]

Aiden has been added to http://www.altaccept.com/ payment gateway.

[defaced]

But this isnt sha3 or blake256, this is scrypt-nfactor-6

or like ghostlander would say.

Its N=5+1

Both new Algos which where worth mining when the came out fresh.
Your "scrypt-ng" or "scrypt-n6" or whatever you want to call it is NOT new.

Just changing a variable does not make it unique in any way.

Vertcoin also "just" changed the n-Factor. But they have a purpose behind this change.
That is another thing your are lacking!

There is a purpose behind the change, to make scrypt hash better for gpu's.

Changing memory requirements on scrypt to meet certain needs is not new, you are correct. I admit using scrypt with default settings isnt terribly innovative.. considering no one else has done it. YAC however did have nfactor 6 mining for some time though, but it wasnt a fixed n parameter like with Aiden. You can either mine it or dont. The options are pretty binary for you right now lol.

In which way exactly does your change make scrypt hash better for gpu's? All your arguments so far got ripped to pieces within minutes.

Scrypt-Jane does not change the N-Factor of Scrypt. As inventor of a new algo you should know that.

I just hope not as many people get fucked with this shitty coin then with Frankocoin. Seeing what a simple minded dev is behind all this crap i am glad i will never mine of of this shitcoin.

I'm sorry you feel this way. I hope you have a great day!

[rsx19]

does sgminer work with nvidia?

if not how do i mine this?

[ivanlabrie]

I can post settings for any card...lol

Just use a proper miner like yacminer 3.5 and off you go.

Question: what's that bunch of code ghostlander posted? :/

If you have something for the 290x (or just the basic setup with yacminer to work on that scrypt:64)
Is there a benchmark mode ?

I just mine to test...

Use the regular scrypt flags, and select n factor 6.

Something like this:

yacminer --scrypt --nfmin 6 --nfmax 6 -R 11264 -g 1 --buffer-size 3600 --lookup-gap 1 --worksize 256 --gpu-engine 1000 --gpu-memclock 1375 --temp-cutoff 95 --gpu-fan 100 --auto-gpu --temp-target 85 --temp-overheat 90

You can also try -g 2 and see how it goes...

[defaced]

does sgminer work with nvidia?

if not how do i mine this?

I'm not certain about nvidia because I dont currently own any nvidia cards. Is there a cuda miner for scrypt-n?

[defaced]

I can post settings for any card...lol

Just use a proper miner like yacminer 3.5 and off you go.

Question: what's that bunch of code ghostlander posted? :/

If you have something for the 290x (or just the basic setup with yacminer to work on that scrypt:64)
Is there a benchmark mode ?

I just mine to test...

Use the regular scrypt flags, and select n factor 6.

Something like this:

yacminer --scrypt --nfmin 6 --nfmax 6 -R 11264 -g 1 --buffer-size 3600 --lookup-gap 1 --worksize 256 --gpu-engine 1000 --gpu-memclock 1375 --temp-cutoff 95 --gpu-fan 100 --auto-gpu --temp-target 85 --temp-overheat 90

You can also try -g 2 and see how it goes...

Yea that should work fine.

[djm34]

does sgminer work with nvidia?

if not how do i mine this?

with cudaminer you need to use --algo scrypt:64  and run the autotune feature to get a proper config

[defaced]

does sgminer work with nvidia?

if not how do i mine this?

with cudaminer you need to use --algo scrypt:64  and run the autotune feature to get a proper config

added your tip to the op ty

[huadaonan]

which special sgminer version should i use if mining this coin?

[defaced]

which special sgminer version should i use if mining this coin?

ive been using the one from sgminerwindows.com

[huadaonan]

which special sgminer version should i use if mining this coin?

ive been using the one from sgminerwindows.com

sgminer 4.1.153-v2 or sgminer 4.0 is that ok?,since i saw your algo is scrypt-og ,consider that need a new distribute sgminer for mining.

[huadaonan]

which special sgminer version should i use if mining this coin?

ive been using the one from sgminerwindows.com

sgminer 4.1.153-v2 or sgminer 4.0 is that ok?,since i saw your algo is scrypt-og ,consider that need a new distribute sgminer for mining. now it seems still a normal scrypt algo?

[rsx19]

does sgminer work with nvidia?

if not how do i mine this?

with cudaminer you need to use --algo scrypt:64  and run the autotune feature to get a proper config

awesome thanks

[Amph]

https://www.virustotal.com/it/file/505426ce627cf2f97f1238b0d33234cf0df03456cbd1f4a6d82dee6c19e52f97/analysis/

most of them are false positive, but i'm not sure about these

Artemis!36620F5AA837
Generic PUA OA
VirTool.Win32.Obfuscator.hg!b1 (v)
Trojan ( 0049553d1 )


is there anti-instamine? and also, KGW is implemented from the start?

[ivanlabrie]

which special sgminer version should i use if mining this coin?

ive been using the one from sgminerwindows.com

sgminer 4.1.153-v2 or sgminer 4.0 is that ok?,since i saw your algo is scrypt-og ,consider that need a new distribute sgminer for mining.

Use yacminer 3.5 and the settings I posted...this is regular scrypt but with a lower n factor (like an inverse vertcoin lol)

[declensions]

does this work with scrypt-a-nfactor / scrypt-jane or any existing setups? Does not work with cgminer?

[defaced]

https://www.virustotal.com/it/file/505426ce627cf2f97f1238b0d33234cf0df03456cbd1f4a6d82dee6c19e52f97/analysis/

most of them are false positive, but i'm not sure about those

Artemis!36620F5AA837
Generic PUA OA
VirTool.Win32.Obfuscator.hg!b1 (v)
Trojan ( 0049553d1 )


is there anti-instamine? and also, KGW is implemented from the start?

kgw from start, using the nite69 fix

[sin242]

https://www.virustotal.com/it/file/505426ce627cf2f97f1238b0d33234cf0df03456cbd1f4a6d82dee6c19e52f97/analysis/

most of them are false positive, but i'm not sure about those

Artemis!36620F5AA837
Generic PUA OA
VirTool.Win32.Obfuscator.hg!b1 (v)
Trojan ( 0049553d1 )


is there anti-instamine? and also, KGW is implemented from the start?

kgw from start, using the nite69 fix

Oh joy.  +1 difficulty for every post-launch minute...

[defaced]

https://www.virustotal.com/it/file/505426ce627cf2f97f1238b0d33234cf0df03456cbd1f4a6d82dee6c19e52f97/analysis/

most of them are false positive, but i'm not sure about those

Artemis!36620F5AA837
Generic PUA OA
VirTool.Win32.Obfuscator.hg!b1 (v)
Trojan ( 0049553d1 )


is there anti-instamine? and also, KGW is implemented from the start?

kgw from start, using the nite69 fix

Oh joy.  +1 difficulty for every post-launch minute...

It helps keep things fair though and keeps orphans and rejects down too.