[ANN] AIDEN | 1st to use sCrypt-OG (GPU Optimized) [v0.10.2.2 Released 7/10/15]

[Khlav]

Thanks for the information. Can you please post your config specs? I can't seem to get this to work. I'm getting 100% rejects.  Thanks again. 

Sure, nothing special there (I am using the sgminer version which is linked in the first post):

{
"pools" : [
   {
...
   }
],
"intensity" : "13",
"nfactor" : "6",
"thread-concurrency":"8192",
"worksize":"256",
"gpu-threads" : "2",
"no-pool-disable" : true,
"temp-overheat" : "70"
}

[trademark]

Thanks for the information. Can you please post your config specs? I can't seem to get this to work. I'm getting 100% rejects.  Thanks again. 

Sure, nothing special there (I am using the sgminer version which is linked in the first post):

{
"pools" : [
   {
...
   }
],
"intensity" : "13",
"nfactor" : "6",
"thread-concurrency":"8192",
"worksize":"256",
"gpu-threads" : "2",
"no-pool-disable" : true,
"temp-overheat" : "70"
}

Thanks. That's what I have except my temp-overheat is 95. 

[gringenmarten]

Pointed a few of my 750 TI's towards this to mine over the night. Let's see how it goes. Currently I'm getting 2.2~2.3 MH/s per 750 Ti. The wallet gets no block source though.

hI,
i HAVE 2X gtx750 TI, i GET 5279KH/S ☺

I'm not getting anywhere near those. @ T70x24 -C 2 -H 2 I'm getting at most 2.4 MH/s on some of my cards, nowhere near 3000s KH/s that other people reported. any thoughts?

cudaminer.exe --algo scrypt:64 -t 2 -o stratum+tcp://adn.minebig.com:3399 -u gtx750.gpu -p 1313  -i 0 -l T70x24 -C 1 -H 2

MSI afterburner 135mhz mem- 651mhz core clock getting on 2   6456Kh/s

[coinfusion]

Difficulty ramping up, was 400k 30 minutes ago, now it's 725k !

[Maestro1]

Pointed a few of my 750 TI's towards this to mine over the night. Let's see how it goes. Currently I'm getting 2.2~2.3 MH/s per 750 Ti. The wallet gets no block source though.

hI,
i HAVE 2X gtx750 TI, i GET 5279KH/S ☺

I'm not getting anywhere near those. @ T70x24 -C 2 -H 2 I'm getting at most 2.4 MH/s on some of my cards, nowhere near 3000s KH/s that other people reported. any thoughts?

cudaminer.exe --algo scrypt:64 -t 2 -o stratum+tcp://adn.minebig.com:3399 -u gtx750.gpu -p 1313  -i 0 -l T70x24 -C 1 -H 2

MSI afterburner 135mhz mem- 651mhz core clock getting on 2   6456Kh/s

Thanks. The only difference was the -C option, which I changed to 1 and did not make a significant difference (sometimes lower, simetimes higher). Mine are on Linux, +130 core, +625 mem on a new bios with modified power limits.. There's something wrong here. Could be Linux drivers.

[shai_]

Thanks..
i'm trying to mine on my node
need more hashrate there ..

best is to run your own node and mine to it ? (for less DOA)

Hey Guys!

I've got a P2Pool solution up and running. Need to bundle up the code and post it somewhere (will do that soon), but wanted to get some other options out there.

P2Pool: http://96.126.121.117:9405

P2Pool is a decentralized approach to pool mining. Rather than connecting to a single pool, the system operates through the combined efforts of many miners who are attached to 'nodes'. No need to register a user account, and any blocks that are mined are split on a PPLNS basis. Biggest benefits? Massively reduced chance of DDOS and coins are sent directly to your wallet.

How do I start mining?

• Point your miner to: stratum+tcp://96.126.121.117:9405
• Use your Aiden address as the user (you can set anything as the password, it doesn't matter).

Fine Tuning:

It is suggested to set a mining difficulty. This can be set by appending a value after your username, to calculate this value use the following formula:

Hash Rate * .0000011641

So if your hash rate is 34000 Kh/sec (34 Mh/sec) and your wallet address was AHT1tq3aDudrxdEmodpQsSfYUkZ2ZVCSW3, you'd want to set it up like so:

(34000 * .0000011641) = 0.0395794

Resulting in...

AHT1tq3aDudrxdEmodpQsSfYUkZ2ZVCSW3+0.0395794

Source Code: https://github.com/snogcel/p2pool-aiden

We need more nodes!!

[jamo4000]

"pools" : [
   {
      "name" : "127.0.0.1",
      "url" : "127.0.0.1:4560",
      "user" : "x",
      "pass" : "xx",
      "pool-priority" : "0"
   }
   
],

"intensity" : "19",
"nfactor" : "6",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "24000",
"shaders" : "0",
"gpu-threads" : "1",
"gpu-engine" : "1080",
"gpu-fan" : "30-90",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "87",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "10",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",

I use this with for 280x and 7970

I have more than 7Mh/s



If i help you :
ADN ALKzTPPoRwxFqyrQbFU3vHQjqu6Zk3qX35
BTC 1GPQMScepTUVLqbF3xw5qmy3LRzjAPRmh9

[knightrader]

How do i compile the wallet? I am new to linux.

[jdebunt]

Giving this a try , seems to run quite well so far

Might do a small "guide" on mining this, as it's not exactly clear for everyone it seems

[supertu]

I can not sync my wallet even through adding nodes that author mentioned 

any ideas?

[burningzoul]

Achieved hashrate:
Sapphire 270 (non x) = 4.685 mh
Sapphire 7950 (dual x) = 6.44 mh

if somebody achieved more than me, maybe we can have a talk, share settings, ideas..etc

[shai_]

maybe some 'whales' can throw hashrate into p2pool, running the source published here works fine
we want more blocks

almost 2GH/s network hashrate.. only 35MH/s in p2pool

[Gunther]

Lets promote Aiden on Twitter/Facebook/IRC! Innovation needs to be supported.

[knightrader]

The temperature is not showing. Everything else works fine tho.

[david1365]

How much initial price ?! probably 0.0014000 !

[SpiryGolden]

How much initial price ?! probably 0.0014000 !

Ill be happy for real 

[david1365]

How much initial price ?! probably 0.0014000 !

Ill be happy for real 

What's the real? look at Darkcoin, always, coins with new algorithms will be successful

[djek31]

Is the coin goin gto be on an exchange? and could it be Poloniex? great exchange!

[oxgroth]

This Coin is going big, Thats what the community was startving for - Something new , something original
Congrats on the good work!

[ibinsad]

How much initial price ?! probably 0.0014000 !

Ill be happy for real 

What's the real? look at Darkcoin, always, coins with new algorithms will be successful

I think, X11 and Hefty1 can be successful but this not because for temperature and watt usage. Maybe it can be optimized to reach better results.