R9 290x

[kpt8]

Hi, I have a R9 290x. And I would mine on wemineall.com. I use sgminer-4.1.0, Win 7 32-bit. But miner rate is very low. (<500 KH / s)
How to configure miner?
I used following configuration:

{
"pools" : [
   {
      "url" : "stratum+tcp://multi1.wemineall.com:5555",
      "user" : "kpt8.1",
      "pass" : "x"
   
   }
]
,
"intensity" : "13",

"xintensity" : "0",

"rawintensity" : "0",

"worksize" : "256",

"kernel" : "scrypt",

"lookup-gap" : "2",

"thread-concurrency" : "8192",

"shaders" : "0",

"gpu-threads" : "1",

"gpu-engine" : "0",

"gpu-fan" : "auto",

"gpu-memclock" : "0",

"gpu-memdiff" : "0",

"gpu-powertune" : "0",

"gpu-vddc" : "0.000",

"temp-cutoff" : "95",

"temp-overheat" : "89",

"temp-target" : "85",

"api-mcast-port" : "4028",

"api-port" : "4028",

"expiry" : "1",

"failover-switch-delay" : "60",

"gpu-dyninterval" : "7",

"gpu-platform" : "0",

"log" : "5",

"no-pool-disable" : true,

"queue" : "1",

"scan-time" : "1",

"tcp-keepalive" : "30",

"temp-hysteresis" : "3",

"shares" : "0",

"kernel-path" : "/usr/local/bin"
}

[henrik_z]

Try these settings first:

intensity: 20
thread-concurrency: 32765
gpu-engine: 920
gpu-memclock: 1500

This should net you 882kh/s. Let that settle for a while and see how you go.

After a while of that, try changing gpu-engine to 1025. If you've got Hynix RAM you'll get close to 1MH.. Elpida OTOH will slow down (if that happens, stick with 920)

[SpeedDemon13]

Your TC setting is low for a 290/290x card. Plus some times the card likes gpu thread of 2. In your case, it just looks like a low TC.

[kpt8]

Is it a reference card? If so, I might be able to get you about 1MH/s on it. I've reached 1080kh/s on my Sapphire 290X (reference) with Hynix memory.

Yep. Its a reference.

Try these settings first:

intensity: 20
thread-concurrency: 32765
gpu-engine: 920
gpu-memclock: 1500

This should net you 882kh/s. Let that settle for a while and see how you go.

After a while of that, try changing gpu-engine to 1025. If you've got Hynix RAM you'll get close to 1MH.. Elpida OTOH will slow down (if that happens, stick with 920)

I try your settings, but have not results. See the picture.

http://s2.postimg.org/rhcum1djt/sdfgbhnjhgfdfghjmkjhgfdfghjmk_mnbgvfcdfgh.png

Your TC setting is low for a 290/290x card. Plus some times the card likes gpu thread of 2. I your case, it just looks like a low TC.

I use your recommendation. Miner rate up. (+15%)

[SpeedDemon13]

Is it a reference card? If so, I might be able to get you about 1MH/s on it. I've reached 1080kh/s on my Sapphire 290X (reference) with Hynix memory.

Yep. Its a reference.

Try these settings first:

intensity: 20
thread-concurrency: 32765
gpu-engine: 920
gpu-memclock: 1500

This should net you 882kh/s. Let that settle for a while and see how you go.

After a while of that, try changing gpu-engine to 1025. If you've got Hynix RAM you'll get close to 1MH.. Elpida OTOH will slow down (if that happens, stick with 920)

I try your settings, but have not results. See the picture.

Your TC setting is low for a 290/290x card. Plus some times the card likes gpu thread of 2. I your case, it just looks like a low TC.

I use your recommendation. Miner rate up. (+15%)

You need these in your config or bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

[henrik_z]

You need these in your config or bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

+1 yes, this! In my experience tc 32765 and g 1 is optimum for 290Xs, but it won't work without the above.

[kpt8]

You need these in your config or bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

I used these commands in the console.

You need these in your config or bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

+1 yes, this! In my experience tc 32765 and g 1 is optimum for 290Xs, but it won't work without the above.

When I set the parameter TC = 32765... (see picture)

http://s15.postimg.org/mc5prs3rv/1234567898765432345678.png

I'm doing something wrong?

[envy2010]

The problem is probably your OS. I have never been able to effectively use a card when I have less usable system memory than the amount of video memory on the card (per GPU). For example, to use a 280X with 3GB of VRAM, I need 4GB of system RAM and a 64-bit OS. The problem does not scale with more cards, so I can run 3x 2GB cards on a 32-bit OS, but have never been able to run even a single 3GB card. I have not been able to figure out why (the miner only actually uses about 50MB of system RAM), but that's just the way it works.

The "thread-concurrency" setting is limited by video and system memory, among other things. A 2GB card likes a TC of 8000 to 16000, a 3GB card 21000 to 24000, and a 4gb card 30000 or higher, but with a 32 bit OS you probably won't be able to run a TC over 16000.

[SpeedDemon13]

You need these in your config or bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

I used these commands in the console.

You need these in your config or bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

+1 yes, this! In my experience tc 32765 and g 1 is optimum for 290Xs, but it won't work without the above.

Why is you gpu clock and memory clock are zero? Are you using MSI Afterburner, Sapphire Trixx or AMD Overdrive to control your clock speeds?

When I set the parameter TC = 32765... (see picture)



I'm doing something wrong?