Hi everyone. This is the official FeeSaver thread, posted by the FeeSaver team.
FeeSaver rents TRON Energy and Bandwidth so you don't have to burn TRX on every USDT (TRC-20) transfer. Everything below is about our own service, and we'll answer questions here.
The problemEvery USDT transfer on TRON uses two network resources:
- Bandwidth for the size of the transaction, about 350 for a typical transfer. Each account gets 600 free Bandwidth that recovers over 24 hours.
- Energy for running the USDT contract: about 64–65K if the recipient already holds USDT, about 130K if their USDT balance is zero.
If your wallet has no Energy, the network burns TRX instead, at the current rate of 100 sun per unit. That's roughly 6.5 TRX for a 65K transfer and 13 TRX for a 130K one. You can get your own Energy by staking TRX, but that locks the TRX up, and unstaking takes 14 days. Renting is the other way.
How rental worksFeeSaver stakes TRX and delegates the resulting Energy or Bandwidth to the address you specify, for the term you choose. The USDT you send never passes through us, and we don't need any access to your wallet. When the term ends, the delegation is taken back, and anything you didn't use goes with it.
Orders are prepaid. You top up a balance and the cost of each order is deducted from it. Prices change with the market, and the exact cost is shown before you confirm an order.
Ways to use it- Telegram bot @FeeSaver_bot. Buy Energy or Bandwidth for any address, with preset amounts or a custom one. The available rental terms are shown in the order screen. The bot also handles deposits, address activation, Smart Mode, auto-refill and API keys.
- Web dashboard. The same purchases from a browser, plus auto-refill and rental with no fixed term.
- Instant purchase by TRX transfer. Send TRX from your wallet to FeeSaver's payment address, and Energy is delegated to the address you sent from. No balance needed. Always copy the payment address from the official site or documentation, never from a message.
- API. For automating your own purchases. The key is issued in the bot; the API documentation is linked below.
Deposits: TRX or USDT on TRON (TRC-20), and USDT or USDC on BSC (BEP-20). Deposits are converted to TRX at the market rate. The minimum is 1 TRX / 1 USDT / 1 USDC; smaller amounts aren't credited.
Automation- Smart Mode. Keeps 131K Energy on a connected address and tops it up after each completed transfer. It isn't meant for several transfers sent at the same moment, because it won't have time to replenish between them. If a connected address doesn't spend Energy within 24 hours, a fee is charged.
- Auto-refill. You set a minimum threshold, the amount to add and the rental term. Whenever Energy on the address drops below the threshold, a refill is ordered.
- Rental with no fixed term. Energy stays on the address without a set end date; you pay for the number of days used at the daily price.
Two things to keep in mind with automation. It runs on your balance: if the balance runs out, auto-refill stops, and you need to set up the order again after topping up (Smart Mode monitoring is suspended too). And auto-refill on an idle address keeps ordering: when rented Energy is taken back at the end of the term and the address drops below the threshold, a new refill follows. Switch it off for addresses you're not using.
Limitations and terms- Personal use only. Under our Terms and Conditions, the service is for individuals aged 18 or older, using it for their own personal needs. Companies, exchanges, payment services and reselling Energy are outside the standard terms and require a separate agreement with the company.
- Identification. The Terms and Conditions include identification (KYC) requirements, and only one account per person is allowed.
- Restricted jurisdictions. The service isn't available to residents of a number of countries and regions, including the United States and the European Union. The full list is in the Terms and Conditions.
- Non-custodial wallets only. Energy has to be delegated to an address you control. It won't help with withdrawals from exchange accounts.
- Temporary resources. Rented Energy and Bandwidth are returned when the term ends; unused amounts don't carry over.
- No guaranteed savings. Renting replaces the TRX burn rather than making transfers free, and fees are generally non-refundable.
- Size orders for the recipient. An order of 65K won't fully cover a transfer to an address with a zero USDT balance; the rest is burned from your TRX.
Please read the
Terms and Conditions before using the service.
FAQDo you need my private key or seed phrase?No. We only need the address that should receive Energy or Bandwidth. FeeSaver never asks for wallet access and doesn't sell Energy through support chats or private messages.
How much Energy do I need for one USDT transfer?About 65K if the recipient already holds USDT, about 130K if their balance is zero. If you're not sure, plan for 130K.
Can I use it to withdraw USDT from an exchange?No. Rented Energy only works for transfers you sign from your own non-custodial wallet.
Can a company or an exchange use FeeSaver?Not under the standard terms, which cover individuals only. Business use needs a separate agreement.
What happens if my balance runs out during auto-refill?Auto-refill stops. Top up the balance and set the order up again.
Where can I see current prices?In the bot or the dashboard before you confirm an order, and on the pricing page of the website.
Official linksOnly trust contacts from this list. If someone else claims to be FeeSaver, please report it here or to support.
Questions and criticism are welcome in this thread.
