24" 16awg PCIE-PCIE and PCIE leads, and 18awg M-F-M Splitters (6pin and 6+2pin)

[QuentinA]

Hi mate, I would like to order 16 of your 24"  PCIe-to-PCIe  to France zip 35000, could you give me a price please? (if you accept to ship there)

Cheers,
Q.

[klondike_bar]

Hi mate, I would like to order 16 of your 24"  PCIe-to-PCIe  to France zip 35000, could you give me a price please? (if you accept to ship there)

Cheers,
Q.

PM sent.

I got fully restocked the other day, so if i couldnt fill your order in te last week or two, you can message me now and I can get the order made up and shipped!

[gt_addict]

Do you ship to the uk?

[philipma1957]

Would you be able to make f-m-f  combiner cable

I have some really good 15 awg 3 ft cables hooked into an Avalon 6 miner.

While the Avalon end seems decent the psu ends get hot.

I have some 20 jack break out boards for 2880 psu

So I need eight jacks to run two Avalon 6 miners

I rather use 16 jacks not 8

[eretron]

PM Sent

[klondike_bar]

Would you be able to make f-m-f  combiner cable

I have some really good 15 awg 3 ft cables hooked into an Avalon 6 miner.

While the Avalon end seems decent the psu ends get hot.

I have some 20 jack break out boards for 2880 psu

So I need eight jacks to run two Avalon 6 miners

I rather use 16 jacks not 8

I can definitely have this produced at a price similar to the M-F-M cables listed on the first page, but theres pretty low demand for them (the 16awg cables are pretty reliable to 300W+) and it would need to be a custom order >100pcs, and with a 3-4 week delivery time.

[TeQ99]

Pm send..

[HagssFIN]

Would you be able to make f-m-f  combiner cable

I have some really good 15 awg 3 ft cables hooked into an Avalon 6 miner.

While the Avalon end seems decent the psu ends get hot.

I have some 20 jack break out boards for 2880 psu

So I need eight jacks to run two Avalon 6 miners

I rather use 16 jacks not 8

I can definitely have this produced at a price similar to the M-F-M cables listed on the first page, but theres pretty low demand for them (the 16awg cables are pretty reliable to 300W+) and it would need to be a custom order >100pcs, and with a 3-4 week delivery time.

The next best thing would maybe then be to use 8pcs of these: " 6" Y-SPLITTERS  " and 8pcs of these: " 24"  PCIe-to-PCIe "

[philipma1957]

Would you be able to make f-m-f  combiner cable

I have some really good 15 awg 3 ft cables hooked into an Avalon 6 miner.

While the Avalon end seems decent the psu ends get hot.

I have some 20 jack break out boards for 2880 psu

So I need eight jacks to run two Avalon 6 miners

I rather use 16 jacks not 8

I can definitely have this produced at a price similar to the M-F-M cables listed on the first page, but theres pretty low demand for them (the 16awg cables are pretty reliable to 300W+) and it would need to be a custom order >100pcs, and with a 3-4 week delivery time.

The next best thing would maybe then be to use 8pcs of these: " 6" Y-SPLITTERS  " and 8pcs of these: " 24"  PCIe-to-PCIe "

yeah sidehack made some for me.

and if you have the 2880/2980 breakout board you will need them if you choose to run avalon 6's

[klondike_bar]

Tons still in stock - bump up to the front page again!

[Jaz80]

Tons still in stock - bump up to the front page again!

Pm sent can you reply please
Thanks

[rdnkjdi]

Sent a PM - ready to order 24 6 Pin Y splitters.

Would order 100 6 Pin to 8 Pin adapters if you would build them.

[klondike_bar]

  NEW!  6" Y-SPLITTERS  [/b]
3x PCIe connectors (M-F-M) (one 6pin feeding 2x 6+2pin)
2x 4" 18awg legs/branches
Good for loads up to 160W/branch or 300W combined
Ideal for powering GPUs that require 8-pin connectors for optimum power

[klondike_bar]

back to the top! custom orders welcome - if you need 5000pcs I'm the guy for you!

[klondike_bar_recovery]

bumping to the top, and including a warning:

my account was hacked and ive been locked out. Im following the recovery process but it relies on Theymos's quick response. Please do not PM or respond to PMs from "klondike_bar" until the issue is resolved.

In the meanwhile, I am able to still fulfill issues either through this account (not recommended for obvious reasons) or via email (if you know it). Previous clients are invited to ask me to sign a transaction with any payment address(es) they have used in the past with me. I'll have no problem signing to demonstrate ownership.

[Finksy]

bumping to the top, and including a warning:

my account was hacked and ive been locked out. Im following the recovery process but it relies on Theymos's quick response. Please do not PM or respond to PMs from "klondike_bar" until the issue is resolved.

In the meanwhile, I am able to still fulfill issues either through this account (not recommended for obvious reasons) or via email (if you know it). Previous clients are invited to ask me to sign a transaction with any payment address(es) they have used in the past with me. I'll have no problem signing to demonstrate ownership.

This posting is legitimate and I can vouch for it, do not send funds to the main klondike_bar account until it is recovered. Recovered.

[klondike_bar_recovery]

to the tp - lots of cables available - please contact me via this account though as my original was hacked/locked

[klondike_bar_recovery]

to the tp - lots of cables available - please contact me via this account though as my original was hacked/locked

still selling these

[Beachguy]

Need some cables........so how can I go about ordering, etc

[mitak64]

PMd