Firstly and foremost: this Auction is in BTC - make your bids in BTC.
Secondly: if your account doesn't show it being a bitcointalk member BEFORE 31-March-2014 then I won't accept your bid.
If there is a question about the timezone on your account vs what I see, I'll allow 31-March as I see it from my account, but no later.It's for 2 mining devices for the one price: Avalon2 2nd Gen 300GH/s Unit with RPi + BFL Single 60GH/s Unit (without power supply)
BUT you will need to add postage above your bid price if you win the auction.
NOTE FOR POSTAGE - the Avalon2 300GH/s unit weighs around ~20kgIf you bid, it must be a multiple of 0.05 BTC and must be higher than any previous valid bid made by anyone else.
Your bid must be clear and the first line of your post must look something like:
1.1 BTC for Ava2+BFLBidding starts at 1.0 BTCAnyone valid according to the above
Second rule, can "Buy It Now" for 3.0 BTC by posting in this thread first: "Buy it now 3.0 BTC"
Yes 3.0 BTC is too high but I thought I'd clear that up before anyone started asking to buy it before the auction finished.
I will only accept direct BTC payment to myself so yes you'll have to trust me.
It's not hard to find out who I am if you look in the cgminer code ...
BTC payment
before I send it.
This Auction will run until Thu 24 Apr 2013 10:01am GMT+10 (Sydney time)
i.e. GMT 00:01 24-Apr
In the USA that will be very approx around early Wed evening
I live in Sydney, Australia.
Shipping will be added on top of the final auction price.
I will use whatever shipping method the winner prefers, since it's up to the winner to cover the cost in BTC before I ship it for them.
Local delivery will be simple enough (and if you "Buy It Now" I'll even consider delivering it myself if you live close enough in Sydney), but interstate or overseas, you would need to take the shipping cost well into consideration.
The Avalon2 weighs 18.6kg (exact) + extras + box and says 21kg on the invoice
Orignal box is 63cm x 56cm x 21.5cm
The BFL Single is 4kg (on the shipping invoice)
Original box is 31cm x 31cm x 15cm
I will ship the two items in their original boxes (which I still have of course)
---
Details:
Avalon2 2nd Gen 300GH/s miner - it mines, accepted rate by the pool, above 285GH/s on default settings - I've only used the default settings.
As detailed on the bitcoin wiki, it is the full silver box Avalon2 at the bottom (except my one is black)
https://en.bitcoin.it/wiki/Avalon2https://en.bitcoin.it/wiki/File:Avlaon2-front-without-face.jpgComes with: an RPi with 8GB SD that I have been using to mine on it with no problems at all
a USB cable from the RPi to the Avalon
a USB cable from the RPi to a standard USB for powering it
a standard Aus computer power lead for the Avalon (won't be sent if not required)
Extra required: a power source to plug the RPi USB power lead into (e.g. a USB charger)
BFL ASIC Single 60GH/s - it mines at 61GH/s with the cover off at 77C currently
I will of course put the cover back on it properly for shipping.
During summer it did on rare occasion throttle in my garage where there was no temperature control but ambient rarely hit 30C
Includes the required USB cable.
Does NOT include a PSU, i.e. there is no power supply with it (I don't have one)I use my mining rig PSU to power it.
It requires 2x6 Pin PCI-e power leads to power it (as can be seen in the picture)
cgminer screen (combined):
2: BAS 1 : max 77C 0.99V | 60.96G / 61.30Gh/s | A:4690618 R:12866 HW:100800 WU:838.3/m
---
Pictures
Click on each picture to see the larger version:
Ava300 - still has protective plastic on it
![](https://ip.bitcointalk.org/?u=http%3A%2F%2F198.245.60.111%2FPix%2F20140420154706Ava300.jpg.200.jpg&t=665&c=pc31pXn3Ibh-Xg)
BFL 61GH/s - the back one
![](https://ip.bitcointalk.org/?u=http%3A%2F%2F198.245.60.111%2FPix%2F20140420164631BAS.jpg.200.jpg&t=665&c=f36ZQIwt-hWuLw)
---
I reserve the right to cancel the auction if necessary for reasonable cause.
If I do so, all bids are cancelled.
I'm reserving this right simply because I want an escape hatch just in case I've made some critical mistake in this post.