HASHRA (OP)
Member
Offline
Activity: 112
Merit: 10
HASHRA - MINING TO THE MOON
|
|
April 24, 2014, 08:52:36 PM Last edit: May 07, 2014, 04:29:50 PM by HASHRA |
|
We are very pleased to announce our latest versions of the HASHRA CONTROLA Firmware for your Gridseed Miners using the Raspberry Pi including the BLADE. We now have our CONTROLA firmware in three flavours: MINI CONTROLA: This is based on our first Controla firmware and continues to support dual mining with the "Mini" 5 Chip Gridseed USB Miners. Now with pool failover support. BLADE CONTROLA: This is our new firmware that works just for the new Gridseed Blade. One of the key features of it is that it calculates the pool hash rate to give you a more accurate "actual" hash rate at the pool side rather than just local. We are obviously still working on this and developing it and will making many updates to it. First tests seem to show it maybe possible to run 10 or more BLADES off one Pi using BLADE CONTROLA. : ) ATLANTIS CONTROLA: This is the firmware designed for our Limited Edition (Already Sold Out) Scrypt Miner. This is based on the MINI CONTROLA without the option of Dual mining mode. All these can be downloaded right now at hashra.com/supportWe will also be putting up new "Set up guides" for our miners very soon. : ) THE HASHRA TEAM UPDATE: Good news Ladies & Gentleman… We have now decided to release the SSH login details for the Gridseed Based products using the CONTROLA Firmware: USER: pi PASSWORD: 3K4Hb8FMeZjQZJEX6scYzZa ENJOY!
|
|
|
|
rrob
Newbie
Offline
Activity: 29
Merit: 0
|
|
April 25, 2014, 12:10:13 AM |
|
Can you upload a mirror link? The dropbox one is restricted downloading at 125KB/s
|
|
|
|
Janezki
Member
Offline
Activity: 85
Merit: 10
|
|
April 25, 2014, 05:01:19 AM Last edit: April 25, 2014, 06:57:19 AM by Janezki |
|
Thanks, downloading Blade Controla now.
edit: Yes, this is good. Only if I could set the clock speed to 838Mhz, which seems to be the optimal to stock Blades. How about adding "professional settings" (with a disclaimer ofcourse), from where you can finetune the frequency as you wish?
|
BCLambovXNggZSCruBycAApon17qTkcr9F
|
|
|
rrob
Newbie
Offline
Activity: 29
Merit: 0
|
|
April 25, 2014, 11:17:31 AM |
|
Can you please add 838freq? This is the most stable freq for blades has 800 is too slow and 850 causes too many hw errors.
|
|
|
|
danny757
Newbie
Offline
Activity: 7
Merit: 0
|
|
April 26, 2014, 12:58:06 AM |
|
Hi is there a place to get this the link is over loaded it seems
what a great Program thanks guys my grids have never ran better or longer looking for ward to get more from you
thanks Danny
|
|
|
|
tonyca
Member
Offline
Activity: 83
Merit: 10
|
|
April 26, 2014, 09:17:51 PM |
|
Yes,please add 835 and 838 frequency,Thank you.
|
BTC: 1KS9rRw6uv7mptjEVhBHYMtGKK2QfWVju4 AMT order #645 and #962, where is my refund? totally amount is US(645#for $ 5155+#962 for $6089)= US$11244
|
|
|
HASHRA (OP)
Member
Offline
Activity: 112
Merit: 10
HASHRA - MINING TO THE MOON
|
|
April 27, 2014, 07:29:19 PM |
|
Yes,please add 835 and 838 frequency,Thank you.
Working on getting the firmware to do 838... will keep you posted. This will arrive in a simple update.
|
|
|
|
mt k
Newbie
Offline
Activity: 32
Merit: 0
|
|
April 28, 2014, 01:40:52 AM |
|
Yes,please add 835 and 838 frequency,Thank you.
+1 and thank you
|
|
|
|
mt k
Newbie
Offline
Activity: 32
Merit: 0
|
|
May 02, 2014, 04:39:02 AM |
|
Yes,please add 835 and 838 frequency,Thank you.
+1 and thank you any update on 835 and 838 frequency?
|
|
|
|
Janezki
Member
Offline
Activity: 85
Merit: 10
|
|
May 02, 2014, 04:42:01 PM |
|
963, 975, 988 would be nice to have too... (that's 24hrs 24mins)
|
BCLambovXNggZSCruBycAApon17qTkcr9F
|
|
|
HASHRA (OP)
Member
Offline
Activity: 112
Merit: 10
HASHRA - MINING TO THE MOON
|
|
May 02, 2014, 06:36:11 PM |
|
Working on it so the update releases out this weekend… though please do not hold us to that. Still got some more tweaking to do with it so it is ready for you.
Will have more options for frequency control.
|
|
|
|
maxzilla
Member
Offline
Activity: 112
Merit: 10
|
|
May 02, 2014, 11:52:52 PM |
|
963, 975, 988 would be nice to have too... (that's 24hrs 24mins) Wow, nice hashrate, are your blades modded? how did you get it to run stable on that frequency? Below the new frequency table for our forked bfgminer (not done with the latest firmware yet though, need some time to make it pretty ) 600, 650, 700, 706, 713, 719, 725, 731, 738, 744, 750, 756, 763, 769, 775, 781, 788, 794, 800, 813, 825, 838, 850, 863, 875, 888, 900, 913, 925, 938, 950, 963, 975, 988, 1000, 1013, 1025, 1038, 1050, 1063, 1075, 1088, 1100, 1113, 1125, 1138, 1150, 1163, 1175, 1188, 1200, 1213, 1225, 1238, 1250, 1263, 1275, 1288, 1300, 1313, 1325, 1338, 1350, 1363, 1375, 1388, 1400
|
|
|
|
Janezki
Member
Offline
Activity: 85
Merit: 10
|
|
May 03, 2014, 01:38:16 AM |
|
HASHRA: Good to hear, some finetuning options are always welcome. maxzilla: This is voltmodded with 39kOhm resistor(s), there's a thread about it in here. 950Mhz in Controla is good with very litte HW errors, at 1000Mhz Blade just doesn't start hashing.
|
BCLambovXNggZSCruBycAApon17qTkcr9F
|
|
|
HASHRA (OP)
Member
Offline
Activity: 112
Merit: 10
HASHRA - MINING TO THE MOON
|
|
May 05, 2014, 03:30:01 PM |
|
Please make sure you update now to version 1.4.5 for your CONTROLA by hitting "Update Firmware". This is for BLADE, MINI and ATLANTIS. We have now added more frequency options. (Magic number for BLADE is 838) Advanced settings section giving individual clock speed control. New drop down menu for easy selection of clock speed. Now comes with per "Miner" control. Good Luck!
|
|
|
|
Janezki
Member
Offline
Activity: 85
Merit: 10
|
|
May 05, 2014, 05:27:03 PM |
|
Absolutely brilliant! On-the-fly & individual clockspeed adjustment is just awesome. Hoping to get 6.5M from my Blade now...
|
BCLambovXNggZSCruBycAApon17qTkcr9F
|
|
|
nwoolls
|
|
May 05, 2014, 07:50:06 PM |
|
Below the new frequency table for our forked bfgminer (not done with the latest firmware yet though, need some time to make it pretty ) Hi there - what fork of BFGMiner is this? Do you have a URL?
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
maxzilla
Member
Offline
Activity: 112
Merit: 10
|
|
May 05, 2014, 08:35:47 PM |
|
Below the new frequency table for our forked bfgminer (not done with the latest firmware yet though, need some time to make it pretty ) Hi there - what fork of BFGMiner is this? Do you have a URL? Hi, this is the url of the fork https://github.com/HASHRA/bfgminerI made changes in the /feature/gridseed-support (v 3.10) branch I tried modifying the gridseed-support-new branch, but for some reason it was not performing as well as 3.10... on the pi at least.
|
|
|
|
nwoolls
|
|
May 05, 2014, 09:09:21 PM |
|
Hi, this is the url of the fork https://github.com/HASHRA/bfgminerI made changes in the /feature/gridseed-support (v 3.10) branch I tried modifying the gridseed-support-new branch, but for some reason it was not performing as well as 3.10... on the pi at least. There is official support in BFGMiner for GridSeed devices. Why fork it instead of contributing?
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
Anonymailer
|
|
May 07, 2014, 09:14:13 AM |
|
Hi, this is the url of the fork https://github.com/HASHRA/bfgminerI made changes in the /feature/gridseed-support (v 3.10) branch I tried modifying the gridseed-support-new branch, but for some reason it was not performing as well as 3.10... on the pi at least. There is official support in BFGMiner for GridSeed devices. Why fork it instead of contributing? There was that note on the pull request that luke left mentioning he moved support there temporarily, only the note was there a while after it was merged in
|
|
|
|
maxzilla
Member
Offline
Activity: 112
Merit: 10
|
|
May 07, 2014, 09:47:55 AM |
|
Hi, this is the url of the fork https://github.com/HASHRA/bfgminerI made changes in the /feature/gridseed-support (v 3.10) branch I tried modifying the gridseed-support-new branch, but for some reason it was not performing as well as 3.10... on the pi at least. There is official support in BFGMiner for GridSeed devices. Why fork it instead of contributing? I'll have another closer look at 3.99, The clock setting is already dynamic there. I added the chip amount setting in the fork, I don't know if that is something that you are interested in having?
|
|
|
|
|