Hello.
I was running XFX 7850's for a while, no problem. I added a 7950.
GPU 0 is a 7950, controlled by a different instance of CGMiner, not running atm
GPU 1 Is a working 7850
GPU 2 is the one I am wondering about.
GPU 2 was working fine in this setup for a few days, then just decided to quit and go down to 50kh.
What is wrong?
(copied code out of miner window)
cgminer version 3.7.2 - Started: [2014-05-22 18:17:16]
--------------------------------------------------------------------------------
(5s):401.3K (avg):383.4Kh/s | A:7808 R:0 HW:0 WU:337.7/m
ST: 2 SS: 0 NB: 37 LW: 304 GF: 0 RF: 0
Connected to stratum.forkpool.com diff 64 with stratum as user druimo60.200
Block: 5013fbb5... Diff:5 Started: [18:41:35] Best share: 18.9K
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 34.0C 1337RPM | OFF / 0.000h/s | A: 0 R:0 HW:0 WU: 0.0/m I:16
GPU 1: 72.0C 3408RPM | 328.1K/330.2Kh/s | A:6496 R:0 HW:0 WU:283.2/m I:16
GPU 2: 42.0C 1163RPM | 53.82K/53.92Kh/s | A:1312 R:0 HW:0 WU: 54.5/m I:16
--------------------------------------------------------------------------------
[2014-05-22 18:41:00] Stratum from pool 0 detected new block
[2014-05-22 18:41:09] Pool 0 difficulty changed to 64
[2014-05-22 18:41:09] Accepted b3aab0d3 Diff 365/128 GPU 1
[2014-05-22 18:41:20] Network diff set to 5
[2014-05-22 18:41:20] Stratum from pool 0 detected new block
[2014-05-22 18:41:25] Network diff set to 5
[2014-05-22 18:41:25] Stratum from pool 0 detected new block
[2014-05-22 18:41:30] Network diff set to 5
[2014-05-22 18:41:30] Stratum from pool 0 detected new block
[2014-05-22 18:41:35] Network diff set to 5
[2014-05-22 18:41:35] Stratum from pool 0 detected new block
