USB Hub for Antminers

[DoctorP]

Hey guys, I've been wondering what USB hub I should use for Antminer U1 and Antminer U2. I'm currently using Sabrent 10 usb port hub and I don't believe it's working well because not all the usbs are recognized meaning they're faulty and I don't get the full ghs out of each miner or my hub sucks.

[Midwestbitcoiner]

https://bitcointalk.org/index.php?topic=253749.0

I use the D-LINK DUB H7.  Works very well.

http://www.amazon.com/D-Link-Hi-Speed-7-Port-Powered-DUB-H7/dp/B00008VFAF

[DoctorP]

https://bitcointalk.org/index.php?topic=253749.0

I use the D-LINK DUB H7.  Works very well.

http://www.amazon.com/D-Link-Hi-Speed-7-Port-Powered-DUB-H7/dp/B00008VFAF

Hi Midwest thank you for replying so quick. I currently have 31 usb miners. If I bought multiple D Link hubs can I chain them together? That works as long as their selfpowered correct?

[Midwestbitcoiner]

https://bitcointalk.org/index.php?topic=253749.0

I use the D-LINK DUB H7.  Works very well.

http://www.amazon.com/D-Link-Hi-Speed-7-Port-Powered-DUB-H7/dp/B00008VFAF

Hi Midwest thank you for replying so quick. I currently have 31 usb miners. If I bought multiple D Link hubs can I chain them together? That works as long as their selfpowered correct?

Should be ok, I wouldnt chain them though, I would just use a different USB port on your computer, plus the power supply that comes with the USB hubs.

Keep in mind that of the 7 ports on the hub, only 6 are really usable.  So you would need 5 hubs for 30 miners, that extra miner you can use directly into your computer/rasp PI, etc, or grab a 6th hub for it and add more miners. 

[ThirtyQuidKid]

Teknet USB 3 hub working here with a mix of U1 & U2 miners

[byt411]

Hey guys, I've been wondering what USB hub I should use for Antminer U1 and Antminer U2. I'm currently using Sabrent 10 usb port hub and I don't believe it's working well because not all the usbs are recognized meaning they're faulty and I don't get the full ghs out of each miner or my hub sucks.

That is probably because the hub does not provide enough power for 10 Antminer U1/U2s.

[CDNinATL]

Hey guys, I've been wondering what USB hub I should use for Antminer U1 and Antminer U2. I'm currently using Sabrent 10 usb port hub and I don't believe it's working well because not all the usbs are recognized meaning they're faulty and I don't get the full ghs out of each miner or my hub sucks.

That is probably because the hub does not provide enough power for 10 Antminer U1/U2s.

This is very likely. Pretty much every USB 2.0 hub doesn't come with enough power to run a full set of Antminers U2. Keep in mind the Antminers needs about 0.5 amps of power. To fill a 10 port hub you'd need about 25 watts total power. The last 10 port USB 2.0 hub I got, has a 5V, 3 amp adapter. That's about 15 watts (volts x amps = watts). So you can see, there isn't enough power to run a full set.

I just ordered this from Amazon:
http://www.amazon.com/GearMo%C2%AE-Port-Power-Adapter-Cable/dp/B00BZABGWK/ref=sr_1_30?ie=UTF8&qid=1400989786&sr=8-30&keywords=usb+3.0+hub+aluminum

The advantage of most USB 3.0 hubs vs the 2.0's is that they come with a 12 volt adapter. In this case a 3 amp one. So that's 36 watts total power available. Take note that I said most, I have seen some come with a 5 volt adapter. Stay away from those. Anyways, we'll see how I make out with this one.