all eight antminers s1 stopped working!

[eovadia3]

in short, all eight of my antminers broke the same way at the same time. they dont mine, the fans dont get loud, cant connect to them. They turn on and fans blow lights on and all but no mining signs. just the slow blink. I even hard reset two of them to see if that would help, and didnt help. They just have a slow blinking green light and they dont beep, and wont connect. Ive also tried new PSUs and no luck. went through three different routers, plugged them straight to modem even. no luck. today is my last day of my 30 day return policy for the PSUs at least I can salvage 500$. but i dont want to. please help??? want to get them moving today!

[kabopar]

When you reset them, you should probably do it one at a time, if you do 2 or more, they are all reset to the same factory default IP address (usually 192.168.1.99), and you get a conflict.  Reset one, connect just this device to your network and try to access its gui (now at the factory default IP address, which hopefully is within your routers address space).
When you get this fixed, perhaps you should change your default password, just in case someone hacked your miners.

Cheers

[eovadia3]

i reset only one first, with the small button, and it still doesnt work. just slow blinking green light.

[kabopar]

i reset only one first, with the small button, and it still doesnt work. just slow blinking green light.

After the reset - did you try to login on the factory IP (listed on the sticker in front of the Ant)?  Can you do the login with a PC or laptop which is not connected to your router, ideally with a crossover ethernet cable (or using a switch/hub, but without the router)?  (this is to rule out the issue that there is some conflict with the IP range or other devices).

good luck