Getting Started

[ARMANDO888]

Hi, i've to start mining altcoins X11 and X13 algorithm, the graphic card  that i would start are  4 sapphire R9 280X (they have need 230 watt to one) with seasonic power supply, 4GB ram and a cheap sempron processor. By that I understood  from October  to Gennuary-Febbruary the price of cryptocurrency improve as happened  for bitcoin litecoin.....
 12000 Mh/s X11
 9333 Mh/s   X13


It's a good starting? I'll gain  money? Naturaly I want make new GPU rigs later

[byt411]

That's a lot, and yes, it's a really good start.

[ARMANDO888]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

[byt411]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

[ARMANDO888]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

[joshraban76]

I can't say it's a good or bad start until I test, try and calculate the profit from all it's factors.

It's all about math brother, go and try, you will not lose in trying.

[byt411]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

[ARMANDO888]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

[byt411]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

That would give you around 14 MH/s on x11, and not 12000 Mh/s.
And yes, you'd be mining at a loss since your electricity price is just too high.

[ARMANDO888]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

That would give you around 14 MH/s on x11, and not 12000 Mh/s.
And yes, you'd be mining at a loss since your electricity price is just too high.

That means i've give up due to stupid tax? And i i use 5 o 6 r9 280x? Is there a solution?

[byt411]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

That would give you around 14 MH/s on x11, and not 12000 Mh/s.
And yes, you'd be mining at a loss since your electricity price is just too high.

That means i've give up due to stupid tax? And i i use 5 o 6 r9 280x? Is there a solution?

The solution would be to buy ASICs that consume very little power.
http://r.sloyalty.com/r/tylyZfa0Ghz5

[ARMANDO888]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

That would give you around 14 MH/s on x11, and not 12000 Mh/s.
And yes, you'd be mining at a loss since your electricity price is just too high.

That means i've give up due to stupid tax? And i i use 5 o 6 r9 280x? Is there a solution?

The solution would be to buy ASICs that consume very little power.
http://r.sloyalty.com/r/tylyZfa0Ghz5

But with ASICs I can't mine altcoins X13 and X11

[byt411]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

That would give you around 14 MH/s on x11, and not 12000 Mh/s.
And yes, you'd be mining at a loss since your electricity price is just too high.

That means i've give up due to stupid tax? And i i use 5 o 6 r9 280x? Is there a solution?

The solution would be to buy ASICs that consume very little power.
http://r.sloyalty.com/r/tylyZfa0Ghz5

But with ASICs I can't mine altcoins X13 and X11

That's correct. You can either buy ASICs for scrypt, which is promising, or you could move to another place with cheaper electricity.

[ARMANDO888]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

That would give you around 14 MH/s on x11, and not 12000 Mh/s.
And yes, you'd be mining at a loss since your electricity price is just too high.

That means i've give up due to stupid tax? And i i use 5 o 6 r9 280x? Is there a solution?

The solution would be to buy ASICs that consume very little power.
http://r.sloyalty.com/r/tylyZfa0Ghz5

But with ASICs I can't mine altcoins X13 and X11

That's correct. You can either buy ASICs for scrypt, which is promising, or you could move to another place with cheaper electricity.

Can you show me this new ASICs, I Can't leave the Italy now, i've to finish school to start the universty abrod

[byt411]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

That would give you around 14 MH/s on x11, and not 12000 Mh/s.
And yes, you'd be mining at a loss since your electricity price is just too high.

That means i've give up due to stupid tax? And i i use 5 o 6 r9 280x? Is there a solution?

The solution would be to buy ASICs that consume very little power.
http://r.sloyalty.com/r/tylyZfa0Ghz5

But with ASICs I can't mine altcoins X13 and X11

That's correct. You can either buy ASICs for scrypt, which is promising, or you could move to another place with cheaper electricity.

Can you show me this new ASICs, I Can't leave the Italy now, i've to finish school to start the universty abrod

http://r.sloyalty.com/r/tylyZfa0Ghz5

Go to that link, and look at the Fury. It's pretty decent, I bought one myself.

[ARMANDO888]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

That would give you around 14 MH/s on x11, and not 12000 Mh/s.
And yes, you'd be mining at a loss since your electricity price is just too high.

That means i've give up due to stupid tax? And i i use 5 o 6 r9 280x? Is there a solution?

The solution would be to buy ASICs that consume very little power.
http://r.sloyalty.com/r/tylyZfa0Ghz5

But with ASICs I can't mine altcoins X13 and X11

That's correct. You can either buy ASICs for scrypt, which is promising, or you could move to another place with cheaper electricity.

Can you show me this new ASICs, I Can't leave the Italy now, i've to finish school to start the universty abrod

http://r.sloyalty.com/r/tylyZfa0Ghz5

Go to that link, and look at the Fury. It's pretty decent, I bought one myself.

How works your ASIC's ?

[ARMANDO888]

That's a lot, and yes, it's a really good start.

But when i try to calculate the profit with http://www.coinwarz.com/calculators     it shows me that I'll lose money
my cost eletricity is 0.24 euro
I want mine the debutting X11 or X13 altcoins and trade them for bitcoins. Please answer me, i've to start,

What rigs do you have? DiD you good profits?

What coin are you talking about?

I tried  with darkcoin with coinwarz

I think you mistyped, it's quite impossible to have 12000 Mh/s with 1 GPU rig.

No 1 GPU, but 4 R9 280X

That would give you around 14 MH/s on x11, and not 12000 Mh/s.
And yes, you'd be mining at a loss since your electricity price is just too high.

That means i've give up due to stupid tax? And i i use 5 o 6 r9 280x? Is there a solution?

The solution would be to buy ASICs that consume very little power.
http://r.sloyalty.com/r/tylyZfa0Ghz5

But with ASICs I can't mine altcoins X13 and X11

That's correct. You can either buy ASICs for scrypt, which is promising, or you could move to another place with cheaper electricity.

Can you show me this new ASICs, I Can't leave the Italy now, i've to finish school to start the universty abrod

http://r.sloyalty.com/r/tylyZfa0Ghz5

Go to that link, and look at the Fury. It's pretty decent, I bought one myself.

SO can i mine  the new scrypt altcoins wirh that ASIC's?

[byt411]

SO can i mine  the new scrypt altcoins wirh that ASIC's?

Yes, that is correct. It's very easy, you just plug in the cable into your PC, plug in electricity, download the software and you can start mining.
I can get you some discounts for these ASICs too. Tell me what you think

[ARMANDO888]

SO can i mine  the new scrypt altcoins wirh that ASIC's?

Yes, that is correct. It's very easy, you just plug in the cable into your PC, plug in electricity, download the software and you can start mining.
I can get you some discounts for these ASICs too. Tell me what you think

For example, this make 2.6 MH/s http://www.gawminers.com/the-fury-1-3-mh-s-asic-scrypt-miner-week-five/ for litecoin right? But for another scrypt altcoin will make more MH/s right?

[byt411]

SO can i mine  the new scrypt altcoins wirh that ASIC's?

Yes, that is correct. It's very easy, you just plug in the cable into your PC, plug in electricity, download the software and you can start mining.
I can get you some discounts for these ASICs too. Tell me what you think

For example, this make 2.6 MH/s http://www.gawminers.com/the-fury-1-3-mh-s-asic-scrypt-miner-week-five/ for litecoin right? But for another scrypt altcoin will make more MH/s right?

Of course not, I don't understand your logic.
1.3 MH/s = 1.3 MH/s.
1.3 MH/s = 1.3 MH/s on Litecoin.
1.3 MH/s = 1.3 MH/s on Dogecoin.
1.3 MH/s = 1.3 MH/s on Auroracoin.

It can only mine scrypt, and different coins won't change its hashrate at all.