[ANN][Groestl/MyriadGroestl] Pool closed

[peteycamey]

cant get it to work well. does it only work on this specific pool?

[1714147680]

1714147680

[1714147680]

1714147680

[srcxxx]

cant get it to work well. does it only work on this specific pool?

Note: they only work with these 4 stratums:


   {
      "url" : "stratum+tcp://cryptohunger.com:50001",
      "user" : "FnzMEE2fkX31J5EjheNMo8pq2672Q5kjGh",
      "pass" : "xxx",
      "poolname" : "GroestlCoinOptimized"
   },
   {
      "url" : "stratum+tcp://cryptohunger.com:50002",
      "user" : "dSwcxqXiYrZehaiy6sKfQv1NyEtxTXrmrz",
      "normal-hashing" : "true",
      "pass" : "xxx",
      "poolname" : "DiamondCoinOptimized"
   },
   {
      "url" : "stratum+tcp://cryptohunger.com:50003",
      "user" : "AGyE6rqYX2bY1xrmLjBE4gvto8ML1xBuq3",
      "pass" : "xxx",
      "poolname" : "AtheistCoinOptimized"
   },
   {
      "url" : "stratum+tcp://cryptohunger.com:50004",
      "user" : "NLwqTRzxE3zxi9LZmETE5epMoiW6rVmLNX",
      "pass" : "xxx",
      "poolname" : "DokdoCoinOptimized"
   }

They do not work with any other pools. They do not work with cryptohunger.com:3333 either. You'll get HW errors and no accepted shares.
See statistics here: http://cryptohunger.com:81. Payouts every hour. Just use your wallet as login.

[alinutu78]

I cant get miner to start when using --normal-hashing in command line (W7 64bits). I am trying to mine diamond. Any help on this param?

Withou this command, miner is starting but get only rejects

[srcxxx]

I cant get miner to start when using --normal-hashing in command line (W7 64bits). I am trying to mine diamond. Any help on this param?

Withou this command, miner is starting but get only rejects

Try to rename example.conf into sgminer.conf and run sgminer without parameters. Switch to diamond pool. Will it work now?

Please provide your full command line and I will double check.

Thanks

[alinutu78]

I cant get miner to start when using --normal-hashing in command line (W7 64bits). I am trying to mine diamond. Any help on this param?

Withou this command, miner is starting but get only rejects

Try to rename example.conf into sgminer.conf and run sgminer without parameters. Switch to diamond pool. Will it work now?

Please provide your full command line and I will double check.

Thanks

My .bat file: sgminer.exe -k groestlcoin -o stratum+tcp://groestlcoin.biz:3334 -u blablabla -p 1 -I 22 -g 1 --thread-concurrency 11200 --lookup-gap 0 -w 256 --normal-hashing

[lobo13hf]

What are the righ settings for 290s? i only get 13mh/s per card i have the 14.6 beta drive win64, and this are my configurations:

Code:

-k groestlcoin -o stratum+tcp://cryptohunger.com:50003 -u AUQYw1YzJuyqT8H6As5qCLXEzUWskrJgYe -p x --lookup-gap 2 -I 19 -g 1 -w 128 --thread-concurrency 8192 --gpu-engine 0-0 --gpu-memclock 0 --auto-fan --gpu-fan 40-80 --temp-cutoff 92,92 --temp-overheat 85,85 --temp-target 75 --gpu-powertune 25

can you also post the righ confs for 7970 and yes i have tried docs.google.com/spreadsheets, another thing why i cant control the speed of my gpu fans?...

[wizard05]

settings for HD 5850 diamond coin 6.3 Mh/s  driver 14.6 beta


setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A

sgminer.exe -k groestlcoin --normal-hashing true -o stratum+tcp://groestlcoin.biz:3334 -u xxxxxxxxxxxxxxxxxxxxxxx -p x -o stratum+tcp://dmdpool.digsys.bg:3333 -u xxxxxxxxx -p xxxxxxxx  -w 256 --failover-only  --no-submit-stale  --expiry 1 --scan-time 1 --queue 0 --temp-cutoff 80 --temp-overheat 85 --temp-target 70 --auto-fan --xintensity 150 -g 1 --thread-concurrency 5824 --gpu-engine 900 --gpu-memclock 900 --lookup-gap 0 --worksize 256


 

[Slydog]

290x= 17.97 Mh/s-14.6
280x= 14.68 Mh/s-13.12

nice bump in speed
:-))

[srcxxx]

What are the righ settings for 290s? i only get 13mh/s per card i have the 14.6 beta drive win64, and this are my configurations:

Code:

-k groestlcoin -o stratum+tcp://cryptohunger.com:50003 -u AUQYw1YzJuyqT8H6As5qCLXEzUWskrJgYe -p x --lookup-gap 2 -I 19 -g 1 -w 128 --thread-concurrency 8192 --gpu-engine 0-0 --gpu-memclock 0 --auto-fan --gpu-fan 40-80 --temp-cutoff 92,92 --temp-overheat 85,85 --temp-target 75 --gpu-powertune 25

can you also post the righ confs for 7970 and yes i have tried docs.google.com/spreadsheets, another thing why i cant control the speed of my gpu fans?...

Hi!

Your parameters are not optimal.
Try to rename example.conf to sgminer.conf and run without command line params.
That example.conf is exactly my config file for R9 290

You need to increase intensity and increase gpu clock from default 947 to around 1050.

[alexzerg11]

My result on groestl:
radeon 5870 (900Mhz, driver ver. 13.12) on the original groestlcoin.cl - 6.535 Mh, and on the optimized groestlcoin.cl - 6.91 Mh = better in 6%
radeon 270x (1180Mhz, driver ver. 14.6b) on the original groestlcoin.cl - 7.5 Mh, and on the optimized groestlcoin.cl - 7.87 Mh = better in 5%
radeon 7850 (1050Mhz, driver ver. 14.6b) on the original groestlcoin.cl - 5.18 Mh, and on the optimized groestlcoin.cl - 5.4 Mh = better in 5%

on myriad-groestl:
radeon 5870 (900Mhz, driver ver. 13.12) on the original myriadcoin-groestl.cl - 12.45 Mh, and on the optimized myriadcoin-groestl.cl - 13.27 Mh = better in 6.5%
radeon 270x (1180Mhz, driver ver. 14.6b) on the original myriadcoin-groestl.cl - 13.47 Mh, and on the optimized myriadcoin-groestl.cl - 12.84 Mh = worse in 5%   
radeon 7850 (1050Mhz, driver ver. 14.6b) on the original myriadcoin-groestl.cl - 9.366 Mh, and on the optimized myriadcoin-groestl.cl - 8.781 Mh = worse in 6%   

[pa1318]

My result on groestl:
radeon 5870 (900Mhz, driver ver. 13.12) on the original groestlcoin.cl - 6.535 Mh, and on the optimized groestlcoin.cl - 6.91 Mh = better in 6%
radeon 270x (1180Mhz, driver ver. 14.6b) on the original groestlcoin.cl - 7.5 Mh, and on the optimized groestlcoin.cl - 7.87 Mh = better in 5%
radeon 7850 (1050Mhz, driver ver. 14.6b) on the original groestlcoin.cl - 5.18 Mh, and on the optimized groestlcoin.cl - 5.4 Mh = better in 5%

on myriad-groestl:
radeon 5870 (900Mhz, driver ver. 13.12) on the original myriadcoin-groestl.cl - 12.45 Mh, and on the optimized myriadcoin-groestl.cl - 13.27 Mh = better in 6.5%
radeon 270x (1180Mhz, driver ver. 14.6b) on the original myriadcoin-groestl.cl - 13.47 Mh, and on the optimized myriadcoin-groestl.cl - 12.84 Mh = worse in 5%   
radeon 7850 (1050Mhz, driver ver. 14.6b) on the original myriadcoin-groestl.cl - 9.366 Mh, and on the optimized myriadcoin-groestl.cl - 8.781 Mh = worse in 6%   

Me too,270x is only 7.8Mh,how to running at  8.4Mh?

[pa1318]

What are the righ settings for 290s? i only get 13mh/s per card i have the 14.6 beta drive win64, and this are my configurations:

Code:

-k groestlcoin -o stratum+tcp://cryptohunger.com:50003 -u AUQYw1YzJuyqT8H6As5qCLXEzUWskrJgYe -p x --lookup-gap 2 -I 19 -g 1 -w 128 --thread-concurrency 8192 --gpu-engine 0-0 --gpu-memclock 0 --auto-fan --gpu-fan 40-80 --temp-cutoff 92,92 --temp-overheat 85,85 --temp-target 75 --gpu-powertune 25

can you also post the righ confs for 7970 and yes i have tried docs.google.com/spreadsheets, another thing why i cant control the speed of my gpu fans?...

Hi!

Your parameters are not optimal.
Try to rename example.conf to sgminer.conf and run without command line params.
That example.conf is exactly my config file for R9 290

You need to increase intensity and increase gpu clock from default 947 to around 1050.

270x is only 7.8Mh(driver 14.6b,gpu 1180),how to running at 8.4Mh?

[srcxxx]

My result on groestl:
radeon 5870 (900Mhz, driver ver. 13.12) on the original groestlcoin.cl - 6.535 Mh, and on the optimized groestlcoin.cl - 6.91 Mh = better in 6%
radeon 270x (1180Mhz, driver ver. 14.6b) on the original groestlcoin.cl - 7.5 Mh, and on the optimized groestlcoin.cl - 7.87 Mh = better in 5%
radeon 7850 (1050Mhz, driver ver. 14.6b) on the original groestlcoin.cl - 5.18 Mh, and on the optimized groestlcoin.cl - 5.4 Mh = better in 5%

on myriad-groestl:
radeon 5870 (900Mhz, driver ver. 13.12) on the original myriadcoin-groestl.cl - 12.45 Mh, and on the optimized myriadcoin-groestl.cl - 13.27 Mh = better in 6.5%
radeon 270x (1180Mhz, driver ver. 14.6b) on the original myriadcoin-groestl.cl - 13.47 Mh, and on the optimized myriadcoin-groestl.cl - 12.84 Mh = worse in 5%   
radeon 7850 (1050Mhz, driver ver. 14.6b) on the original myriadcoin-groestl.cl - 9.366 Mh, and on the optimized myriadcoin-groestl.cl - 8.781 Mh = worse in 6%   

Hi!

Thank you for your tests!

Please try optimized kernel binary on your 270X. Will you get to 8.4MHs?

As for myriad-groestl, I know that it is not as fast. And that's why I'm not advertising myriad-groestl support.
But... I think I know how to make myriad-groestl perform better.
And planning to get to shortly.

[srcxxx]

270x is only 7.8Mh(driver 14.6b,gpu 1180),how to running at 8.4Mh?

You need to download the optimized kernel binary for 270X and use stratum+tcp://cryptohunger.com:50001
(See 1st post)

[polanskiman]

Possible to get these to work with danbi's pool?

[srcxxx]

I cant get miner to start when using --normal-hashing in command line (W7 64bits). I am trying to mine diamond. Any help on this param?

Withou this command, miner is starting but get only rejects

Try to rename example.conf into sgminer.conf and run sgminer without parameters. Switch to diamond pool. Will it work now?

Please provide your full command line and I will double check.

Thanks

My .bat file: sgminer.exe -k groestlcoin -o stratum+tcp://groestlcoin.biz:3334 -u blablabla -p 1 -I 22 -g 1 --thread-concurrency 11200 --lookup-gap 0 -w 256 --normal-hashing

Should be: sgminer.exe -k groestlcoin -o stratum+tcp://groestlcoin.biz:3334 -u blablabla -p 1 -I 22 -g 1 --thread-concurrency 11200 --lookup-gap 0 -w 256 --normal-hashing true

[srcxxx]

Possible to get these to work with danbi's pool?

Sure. I'm getting 16.7MH/s on R9 290 using "groestlcoin" kernel. "Optimized" is still faster, of course.

Diamondcoin (16.7 MH/s on R9 290): sgminer.exe -k groestlcoin -o stratum+tcp://dmdpool.digsys.bg:3333 -u whatever -p whatever -I 22 -w 256 --normal-hashing true
Diamondcoin (17.9 MH/s on R9 290): sgminer.exe -k optimized -o stratum+tcp://cryptohunger.com:50002 -u dSwcxqXiYrZehaiy6sKfQv1NyEtxTXrmrz -p xxx -I 22 -w 256 --normal-hashing true

[srcxxx]

Version 1.2.4 of grs-sgminer is now avaiable. See https://bitcointalk.org/index.php?topic=652849 for details.

R9 290 speed increased from 17.1 MH/s to 17.9 MH/s. Other GPUs should get a similar boost.

* now you need to use "-k optimized" if you want to use the optimized kernel.
* lookup-gap and thread-concurrency parameters are now removed. They were only needed for scrypt mining anyways.

PS: Future plans are adding myriad-groestl optimized support

[atlas12345]

hi, it should there be a problem with the new site because I mine for a week but I do not get anything in my wallet since 20/06.
I utilsait version 1 of the optimized kernel but I just upgrade to version 2 can be my problem be solved?

[pa1318]

Version 1.2.4 of grs-sgminer is now avaiable. See https://bitcointalk.org/index.php?topic=652849 for details.

R9 290 speed increased from 17.1 MH/s to 17.9 MH/s. Other GPUs should get a similar boost.

* now you need to use "-k optimized" if you want to use the optimized kernel.
* lookup-gap and thread-concurrency parameters are now removed. They were only needed for scrypt mining anyways.

PS: Future plans are adding myriad-groestl optimized support

270x on 14.6 driver,use "-k optimized"  get HW,no WU,why?