cisahasa
Legendary
Offline
Activity: 910
Merit: 1000
|
|
September 25, 2014, 10:01:38 AM |
|
i would like to dot that if phoenixcoin.org wouldnt be offline u need to download client? yep right... i asked abctc to create an NXT asset exchange for UFO Coin. Lets see qt: http://www.filedropper.com/phoenixcoin-qti got only rejected shares, solo did not work These are relatively good results, cisahasa. Whats your hardware? And, yes, it appears solo is having some issues. Please try a p2p pool instead of solo i tried http://morehash.pw for pheonix accepted rate was only 11% no matter what i setup feather testpool is not online or if have wrong url i use radeon 280x
|
|
|
|
daimyo
|
|
September 25, 2014, 10:18:07 AM |
|
hmmm so it seems the miner needs openCL coding still... it works on nvidia
|
Value does not exist outside of human consciousness
|
|
|
cisahasa
Legendary
Offline
Activity: 910
Merit: 1000
|
|
September 25, 2014, 10:29:26 AM Last edit: September 25, 2014, 01:36:50 PM by cisahasa |
|
hmmm so it seems the miner needs openCL coding still... it works on nvidia
solved.!! updated 3.7.5 miner radeon 280x: --worksize 256 -g 2 --thread-concurrency 8192 -I 13 3.7.5 miner: http://www.ftc-c.com/pack/testnet.rar280X power usages on my system: scrypt: 248W/GPU cryptonight: 140W/GPU x11: 115W/GPU x13: 114W/GPU x15: 113W/GPU neoscrypt: 105W/GPU fresh: 96W/GPU
|
|
|
|
daimyo
|
|
September 25, 2014, 02:03:06 PM |
|
So far so good! I am not entirely sure but I guess it is kinda like x11 now - it uses less power because it is not using fully utilizing the graphics device. This might be the case with neoscrypt still. Lets see how the power output goes when the miner kernel is optimized
|
Value does not exist outside of human consciousness
|
|
|
cisahasa
Legendary
Offline
Activity: 910
Merit: 1000
|
|
September 25, 2014, 02:10:16 PM |
|
So far so good! I am not entirely sure but I guess it is kinda like x11 now - it uses less power because it is not using fully utilizing the graphics device. This might be the case with neoscrypt still. Lets see how the power output goes when the miner kernel is optimized seems its very near for releasing neo fork
|
|
|
|
daimyo
|
|
September 25, 2014, 03:02:43 PM |
|
So far so good! I am not entirely sure but I guess it is kinda like x11 now - it uses less power because it is not using fully utilizing the graphics device. This might be the case with neoscrypt still. Lets see how the power output goes when the miner kernel is optimized seems its very near for releasing neo fork Definitely closer! Your cards are very cool at 50C thats why i think there room for more hashes
|
Value does not exist outside of human consciousness
|
|
|
Hippie Tech
aka Amenstop
Legendary
Offline
Activity: 1624
Merit: 1001
All cryptos are FIAT digital currency. Do not use.
|
|
September 25, 2014, 03:44:47 PM |
|
I can't seem to get the HW errors to stop. lol I've tried: TC - 22400, 11200, 8192, 6144, 2048, 400 GPU0 - 280x GPU1 - 7870 main display Plzz help.
|
|
|
|
cisahasa
Legendary
Offline
Activity: 910
Merit: 1000
|
|
September 25, 2014, 03:55:34 PM Last edit: September 25, 2014, 04:14:14 PM by cisahasa |
|
I can't seem to get the HW errors to stop. lol I've tried: TC - 22400, 11200, 8192, 6144, 2048, 400 GPU0 - 280x GPU1 - 7870 main display Plzz help. i think your problem is amd drivers if u want u can dl and try my settings as it is, working with my 280x, miner version 3.7.5, includes bin file that works with 14.xx&13.xx drivers http://www.filedropper.com/375-worksforradeonminer works only with bin file created with 13.xx drivers if created with 14.xx u will see double hashspeed and only hw erros
|
|
|
|
Hippie Tech
aka Amenstop
Legendary
Offline
Activity: 1624
Merit: 1001
All cryptos are FIAT digital currency. Do not use.
|
|
September 25, 2014, 05:16:13 PM |
|
I can't seem to get the HW errors to stop. lol I've tried: TC - 22400, 11200, 8192, 6144, 2048, 400 GPU0 - 280x GPU1 - 7870 main display Plzz help. i think your problem is amd drivers if u want u can dl and try my settings as it is, working with my 280x, miner version 3.7.5, includes bin file that works with 14.xx&13.xx drivers http://www.filedropper.com/375-worksforradeonminer works only with bin file created with 13.xx drivers if created with 14.xx u will see double hashspeed and only hw erros Thx but.. https://www.virustotal.com/en/file/f1b7bfad92113a55a9866f986cd72ecc9adaced5537dcd0950f397cf80ba75bc/analysis/1411664982/Both AVware and VIPRE flagged this as "VirTool.Win32.Obfuscator.hg!b1 (v) ". I'll try this with the 13.12 set later.
|
|
|
|
daimyo
|
|
September 25, 2014, 05:34:37 PM |
|
What does waiting for available work from pools mean?
|
Value does not exist outside of human consciousness
|
|
|
|
cisahasa
Legendary
Offline
Activity: 910
Merit: 1000
|
|
September 28, 2014, 08:12:34 AM |
|
my radeon testing with neo gpuminer 3.7.5 gone fine so far, no problems. miner looking good!
|
|
|
|
trombel
Newbie
Offline
Activity: 9
Merit: 0
|
|
October 01, 2014, 05:08:31 AM |
|
Hello, I want try https://github.com/vehre/neo-gpuminer , but I getting only HW errors. I compiled it under 32bit xubuntu 12.04 LTS (ATI HD 7700 serie, 2GB computer ram) with Catalyst 13.04 (second try with 13.12). Scrypt, X11, quark can be mined fine on this computer. I don't know what I made wrongly. I clone repository, I used this commands: git clone https://github.com/vehre/neo-gpuminer cd neo-gpuminer ./autogen.sh make
./cgminer -o [pool] -u [worker name] -p [password] -I 11 --neoscrypt
Autogen output ------------------------------------------------------------------------ cgminer 3.7.6b ------------------------------------------------------------------------
Configuration Options Summary:
libcurl(GBT+getwork).: Enabled: -lcurl curses.TUI...........: FOUND: -lncurses OpenCL...............: FOUND. GPU mining support enabled scrypt...............: Disabled keccak...............: Disabled neoscrypt............: Enabled ADL..................: SDK NOT found, GPU monitoring support DISABLED NVML.................: SDK NOT found, GPU monitoring support DISABLED
Avalon.ASICs.........: Disabled BFL.ASICs............: Disabled BitForce.FPGAs.......: Disabled BitFury.ASICs........: Disabled Icarus.FPGAs.........: Disabled Klondike.ASICs.......: Disabled ModMiner.FPGAs.......: Disabled
Compilation............: make (or gmake) CPPFLAGS.............: CFLAGS...............: -g -O2 LDFLAGS..............: -lpthread LDADD................: -lcurl compat/jansson-2.5/src/.libs/libjansson.a -lpthread -lOpenCL -lncurses -lm -lrt
Installation...........: make install (as root if needed, with 'su' or 'sudo') prefix...............: /usr/local
|
|
|
|
cisahasa
Legendary
Offline
Activity: 910
Merit: 1000
|
|
October 01, 2014, 06:17:13 PM Last edit: October 01, 2014, 07:46:45 PM by cisahasa |
|
Hello, I want try https://github.com/vehre/neo-gpuminer , but I getting only HW errors. I compiled it under 32bit xubuntu 12.04 LTS (ATI HD 7700 serie, 2GB computer ram) with Catalyst 13.04 (second try with 13.12). Scrypt, X11, quark can be mined fine on this computer. I don't know what I made wrongly. I clone repository, I used this commands: git clone https://github.com/vehre/neo-gpuminer cd neo-gpuminer ./autogen.sh make
./cgminer -o [pool] -u [worker name] -p [password] -I 11 --neoscrypt
Autogen output ------------------------------------------------------------------------ cgminer 3.7.6b ------------------------------------------------------------------------
Configuration Options Summary:
libcurl(GBT+getwork).: Enabled: -lcurl curses.TUI...........: FOUND: -lncurses OpenCL...............: FOUND. GPU mining support enabled scrypt...............: Disabled keccak...............: Disabled neoscrypt............: Enabled ADL..................: SDK NOT found, GPU monitoring support DISABLED NVML.................: SDK NOT found, GPU monitoring support DISABLED
Avalon.ASICs.........: Disabled BFL.ASICs............: Disabled BitForce.FPGAs.......: Disabled BitFury.ASICs........: Disabled Icarus.FPGAs.........: Disabled Klondike.ASICs.......: Disabled ModMiner.FPGAs.......: Disabled
Compilation............: make (or gmake) CPPFLAGS.............: CFLAGS...............: -g -O2 LDFLAGS..............: -lpthread LDADD................: -lcurl compat/jansson-2.5/src/.libs/libjansson.a -lpthread -lOpenCL -lncurses -lm -lrt
Installation...........: make install (as root if needed, with 'su' or 'sudo') prefix...............: /usr/local
seeking answer.. vehre from ftc forum: "That looks quite fine. Please retry mining setting intensity significantly lower, I.e. to 8 or even less (-i " edit:there seems to be some other guy with same problem, will info when there is any
|
|
|
|
daimyo
|
|
October 01, 2014, 07:49:06 PM |
|
Folks, we need a shoulder to make our own block explorer. If you like to help us please check the bounty at: http://ufocoin.co/job/abe-for-ufo-cointhanks
|
Value does not exist outside of human consciousness
|
|
|
dreamwatcher
Legendary
Offline
Activity: 1064
Merit: 1000
|
|
October 01, 2014, 11:52:01 PM |
|
Note: I am the Owner/operator of Cryptocoinexplorer.com. The previous sponsor of the UFO explorer on CCE conveyed that they were no longer going to sponsor the UFO explorer. I guess I am going to plea the case for somebody taking over sponsorship on CCE . The monthly sponsorship of UFO on CCE is $25.00 a month. This includes the CCE 3.5 explorer (Not ABE based, completely original code), hosted and maintained, the use of the explorer node as a seed, and CCE 3.5 is still being developed with new features. All by a professional who has both ran and written explorer software for over two years. vs. Somebody getting ABE up and running with UFO, trying to get and keep it stable, pay for hosting and maintain it all. I know from my experience with ABE over the last couple of years that one is going to have a hard time finding a VPS with the capabilities to run ABE in stable fashion with decent traffic for under $25.00 a month. That is just one of the reasons I wrote CCE 3.5. Ultimately it is up to the community to decide what is best for it. I just wanted to make sure that information is there for you to decide.
|
|
|
|
cisahasa
Legendary
Offline
Activity: 910
Merit: 1000
|
|
October 02, 2014, 04:34:58 PM Last edit: October 03, 2014, 12:35:38 PM by cisahasa |
|
Note: I am the Owner/operator of Cryptocoinexplorer.com. The previous sponsor of the UFO explorer on CCE conveyed that they were no longer going to sponsor the UFO explorer. I guess I am going to plea the case for somebody taking over sponsorship on CCE . The monthly sponsorship of UFO on CCE is $25.00 a month. This includes the CCE 3.5 explorer (Not ABE based, completely original code), hosted and maintained, the use of the explorer node as a seed, and CCE 3.5 is still being developed with new features. All by a professional who has both ran and written explorer software for over two years. vs. Somebody getting ABE up and running with UFO, trying to get and keep it stable, pay for hosting and maintain it all. I know from my experience with ABE over the last couple of years that one is going to have a hard time finding a VPS with the capabilities to run ABE in stable fashion with decent traffic for under $25.00 a month. That is just one of the reasons I wrote CCE 3.5. Ultimately it is up to the community to decide what is best for it. I just wanted to make sure that information is there for you to decide. i fully agree this is a good choice. But ufo team has changed and they want to stand by they own. i feel it would be best to keep up with your explorer until ufo has working solution of their own. so im supporting this issue saying i will personally pay 1 month fee by my self for now. so we are good to go with old explorer still one month. ufo team has now time to do changes smoothly.
|
|
|
|
|
cisahasa
Legendary
Offline
Activity: 910
Merit: 1000
|
|
October 03, 2014, 02:23:04 PM |
|
seems ftc guys are updating their core to 0.9.3.. it would be no trick to kick ufo in to same core(it may ease the fork in the future)
this just cave me crazy idea, could there be a multiwallet for having more than 1 coin in same wallet? is there any use of that?
|
|
|
|
daimyo
|
|
October 03, 2014, 02:34:46 PM |
|
seems ftc guys are updating their core to 0.9.3.. it would be no trick to kick ufo in to same core(it may ease the fork in the future)
this just cave me crazy idea, could there be a multiwallet for having more than 1 coin in same wallet? is there any use of that?
it is a good idea that has been around for some time but I still havent seen a working example...
|
Value does not exist outside of human consciousness
|
|
|
|