opossum
|
|
June 27, 2014, 02:15:33 PM |
|
hi have try this sgminer but this one dont show my gpu temp and fan speed for my ati 5870
the windows binary contains adl support (if not let me know I will correct that). Otherwise by compiling yourself from github, you have to have 3 files from AMD SDK to enable adl support can't see the temp also, using on windows
|
▄▄█████████▄▄ ▄█████████████████▄ ▄████▀ ▀████▄ █████ █████▄ ██████████████▄█████████████▄ ████▀▀▀▀▀▀▀█████████▀▀▀▀▀▀▀███▄ ████ ███████ ████ ████ ███████ ████ ████ ███████ ████ ████ ███████ ████ ████▄ ███████ ▄████ ▀████ ███████ ▄████▀ ▀████▄▄▄███████▄▄▄████▀ ▀▀███████████████▀▀
| TIDEX | ║ █ ║ | | ║ █ ║ | |
|
|
|
chadwickx16
|
|
June 27, 2014, 03:25:08 PM |
|
WHO CAN HELP ME?!
I think you are going to have trouble using BAMT. I was using BAMT 1.6 with lasybear's sgminer but never got the hashing rate that everyone else is getting. I'm switching to Xubuntu and hopefully going to try to install the 14.6 with this sgminer fork. If you haven't already switched to Xunbuntu, BAMT is easy. Took me 10 mins tops.
|
|
|
|
uberua
Member
Offline
Activity: 179
Merit: 10
|
|
June 27, 2014, 06:18:21 PM Last edit: June 27, 2014, 08:16:01 PM by uberua |
|
I tried this miner and Catalyst 14.6 with the same settings like I was using with x11mod miner with Catalyst 14.4 and have a lot of HW (Windows 7, 64bit). Did anyone has the same? sgminer.exe -k x11mod -o **** -p **** --intensity 17,17,15,15 --thread-concurrency 8192 --lookup-gap 2 --worksize 256 -g 2 (I have 2*7950 + 2*7870).
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
June 27, 2014, 08:21:16 PM |
|
I tried this miner and Catalyst 14.6 with the same settings like I was using with x11mod miner with Catalyst 14.4 and have a lot of HW (Windows 7, 64bit). Did anyone has the same? sgminer.exe -k x11mod -o **** -p **** --intensity 17,17,15,15 --thread-concurrency 8192 --lookup-gap 2 --worksize 256 -g 2 (I have 2*7950 + 2*7870). Have you tried with default setting ? (also I thought that 14.6 was only for windows 8.1)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
uberua
Member
Offline
Activity: 179
Merit: 10
|
|
June 27, 2014, 08:45:08 PM |
|
What default settings do you mean? I didn't change anything, I just copied the batch file from my x11mod sgminer folder to your miner folder and started it.
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
June 27, 2014, 09:00:47 PM |
|
What default settings do you mean? I didn't change anything, I just copied the batch file from my x11mod sgminer folder to your miner folder and started it.
try without anything left except the intensity
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
uberua
Member
Offline
Activity: 179
Merit: 10
|
|
June 27, 2014, 09:11:51 PM |
|
I tried just now, It didn't help, still HW.
|
|
|
|
GGin
Newbie
Offline
Activity: 40
Merit: 0
|
|
June 28, 2014, 12:16:41 AM |
|
I tried just now, It didn't help, still HW.
The problem with HW and driver v14.6(rc2) is solved. Just open files: x11mod.cl / x13mod.cl for sgminer v4.1.xx (darkcoin-mod.cl / marucoin-mod.cl - for sgminer v5) and replace each line, it at beginning of the file: - #define SPH_T32(x) ((x) & SPH_C32(0xFFFFFFFF))
- #define SPH_ROTL32(x, n) SPH_T32(((x) << (n)) | ((x) >> (32 - (n))))
- #define SPH_T64(x) ((x) & SPH_C64(0xFFFFFFFFFFFFFFFF))
- #define SPH_ROTL64(x, n) SPH_T64(((x) << (n)) | ((x) >> (64 - (n))))
to this- #define SPH_T32(x) (as_uint(x))
- #define SPH_ROTL32(x, n) rotate(as_uint(x), as_uint(n))
- #define SPH_T64(x) (as_ulong(x))
- #define SPH_ROTL64(x, n) rotate(as_ulong(x), (n) & 0xFFFFFFFFFFFFFFFFUL)
It's work x11/x13 fine for me. Thanks to butcherette from http://club.dns-shop.ru/forum/search/?action=go_post&id=931006
|
|
|
|
uberua
Member
Offline
Activity: 179
Merit: 10
|
|
June 28, 2014, 05:32:35 AM Last edit: June 28, 2014, 09:36:13 AM by uberua |
|
Thank you, it's working now.
|
|
|
|
Bu777
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 28, 2014, 03:49:30 PM |
|
Help!!!Anyone have a 3 modified INF for the 14.6 RC2 yet for 5+ GPUs
|
|
|
|
|
Mastermine
|
|
July 01, 2014, 08:24:11 AM Last edit: July 01, 2014, 09:10:42 AM by Mastermine |
|
I tried just now, It didn't help, still HW.
The problem with HW and driver v14.6(rc2) is solved. Just open files: x11mod.cl / x13mod.cl for sgminer v4.1.xx (darkcoin-mod.cl / marucoin-mod.cl - for sgminer v5) and replace each line, it at beginning of the file: - #define SPH_T32(x) ((x) & SPH_C32(0xFFFFFFFF))
- #define SPH_ROTL32(x, n) SPH_T32(((x) << (n)) | ((x) >> (32 - (n))))
- #define SPH_T64(x) ((x) & SPH_C64(0xFFFFFFFFFFFFFFFF))
- #define SPH_ROTL64(x, n) SPH_T64(((x) << (n)) | ((x) >> (64 - (n))))
to this- #define SPH_T32(x) (as_uint(x))
- #define SPH_ROTL32(x, n) rotate(as_uint(x), as_uint(n))
- #define SPH_T64(x) (as_ulong(x))
- #define SPH_ROTL64(x, n) rotate(as_ulong(x), (n) & 0xFFFFFFFFFFFFFFFFUL)
It's work x11/x13 fine for me. Thanks to butcherette from http://club.dns-shop.ru/forum/search/?action=go_post&id=931006 thanks for the fix i took the liberty of uploading the file with the corrected x11mod.cl and x13mod.cl files: https://mega.co.nz/#!VYdChDTb!z22fJmx_rFoYg8sQecRwh9FEVWKP063PGN4XdeM22O8 As you can see the virus total matches the one in the OP here: https://bitcointalk.org/index.php?topic=623409. Although it has alot of hits :/ kinda scary: https://www.virustotal.com/en/file/0ce514a7c264ff8b2ab6dfaf9677e1df9539a398df6eeed46f466a2131ac6825/analysis/(first link is original copy in OP) https://www.virustotal.com/en/file/250513aa817824bdc80a5b2d0cfe370eaf4805a29e4cbf64450bb975d25bc91e/analysis/(second link is file provided in my upload ) Both same no additional files added, just changed the 2 lines in x11mod.cl and x13mod.cl.. If it had problems they were there before i touched it . Hope it helps
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 01, 2014, 10:20:16 AM |
|
I tried just now, It didn't help, still HW.
The problem with HW and driver v14.6(rc2) is solved. Just open files: x11mod.cl / x13mod.cl for sgminer v4.1.xx (darkcoin-mod.cl / marucoin-mod.cl - for sgminer v5) and replace each line, it at beginning of the file: - #define SPH_T32(x) ((x) & SPH_C32(0xFFFFFFFF))
- #define SPH_ROTL32(x, n) SPH_T32(((x) << (n)) | ((x) >> (32 - (n))))
- #define SPH_T64(x) ((x) & SPH_C64(0xFFFFFFFFFFFFFFFF))
- #define SPH_ROTL64(x, n) SPH_T64(((x) << (n)) | ((x) >> (64 - (n))))
to this- #define SPH_T32(x) (as_uint(x))
- #define SPH_ROTL32(x, n) rotate(as_uint(x), as_uint(n))
- #define SPH_T64(x) (as_ulong(x))
- #define SPH_ROTL64(x, n) rotate(as_ulong(x), (n) & 0xFFFFFFFFFFFFFFFFUL)
It's work x11/x13 fine for me. Thanks to butcherette from http://club.dns-shop.ru/forum/search/?action=go_post&id=931006 thanks for the fix i took the liberty of uploading the file with the corrected x11mod.cl and x13mod.cl files: https://mega.co.nz/#!VYdChDTb!z22fJmx_rFoYg8sQecRwh9FEVWKP063PGN4XdeM22O8 As you can see the virus total matches the one in the OP here: https://bitcointalk.org/index.php?topic=623409. Although it has alot of hits :/ kinda scary: https://www.virustotal.com/en/file/0ce514a7c264ff8b2ab6dfaf9677e1df9539a398df6eeed46f466a2131ac6825/analysis/(first link is original copy in OP) https://www.virustotal.com/en/file/250513aa817824bdc80a5b2d0cfe370eaf4805a29e4cbf64450bb975d25bc91e/analysis/(second link is file provided in my upload ) Both same no additional files added, just changed the 2 lines in x11mod.cl and x13mod.cl.. If it had problems they were there before i touched it . Hope it helps this was changed some time ago, but not released yet... regarding the bad score over virus total (and it is the same for all miners), this is the way it is... don't like it, don't download it... (and compile yourself)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
July 01, 2014, 10:30:07 AM |
|
are older cards supported? Like x13modold ?
|
|
|
|
kgonepostl
|
|
July 01, 2014, 07:40:33 PM |
|
I tried just now, It didn't help, still HW.
The problem with HW and driver v14.6(rc2) is solved. Just open files: x11mod.cl / x13mod.cl for sgminer v4.1.xx (darkcoin-mod.cl / marucoin-mod.cl - for sgminer v5) and replace each line, it at beginning of the file: - #define SPH_T32(x) ((x) & SPH_C32(0xFFFFFFFF))
- #define SPH_ROTL32(x, n) SPH_T32(((x) << (n)) | ((x) >> (32 - (n))))
- #define SPH_T64(x) ((x) & SPH_C64(0xFFFFFFFFFFFFFFFF))
- #define SPH_ROTL64(x, n) SPH_T64(((x) << (n)) | ((x) >> (64 - (n))))
to this- #define SPH_T32(x) (as_uint(x))
- #define SPH_ROTL32(x, n) rotate(as_uint(x), as_uint(n))
- #define SPH_T64(x) (as_ulong(x))
- #define SPH_ROTL64(x, n) rotate(as_ulong(x), (n) & 0xFFFFFFFFFFFFFFFFUL)
It's work x11/x13 fine for me. Thanks to butcherette from http://club.dns-shop.ru/forum/search/?action=go_post&id=931006 thanks for the fix i took the liberty of uploading the file with the corrected x11mod.cl and x13mod.cl files: https://mega.co.nz/#!VYdChDTb!z22fJmx_rFoYg8sQecRwh9FEVWKP063PGN4XdeM22O8 As you can see the virus total matches the one in the OP here: https://bitcointalk.org/index.php?topic=623409. Although it has alot of hits :/ kinda scary: https://www.virustotal.com/en/file/0ce514a7c264ff8b2ab6dfaf9677e1df9539a398df6eeed46f466a2131ac6825/analysis/(first link is original copy in OP) https://www.virustotal.com/en/file/250513aa817824bdc80a5b2d0cfe370eaf4805a29e4cbf64450bb975d25bc91e/analysis/(second link is file provided in my upload ) Both same no additional files added, just changed the 2 lines in x11mod.cl and x13mod.cl.. If it had problems they were there before i touched it . Hope it helps I wish there was a way to know if it is truly clean! That's a lot of false positives!!!!!!!!!!!!
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 01, 2014, 07:48:04 PM |
|
I tried just now, It didn't help, still HW.
The problem with HW and driver v14.6(rc2) is solved. Just open files: x11mod.cl / x13mod.cl for sgminer v4.1.xx (darkcoin-mod.cl / marucoin-mod.cl - for sgminer v5) and replace each line, it at beginning of the file: - #define SPH_T32(x) ((x) & SPH_C32(0xFFFFFFFF))
- #define SPH_ROTL32(x, n) SPH_T32(((x) << (n)) | ((x) >> (32 - (n))))
- #define SPH_T64(x) ((x) & SPH_C64(0xFFFFFFFFFFFFFFFF))
- #define SPH_ROTL64(x, n) SPH_T64(((x) << (n)) | ((x) >> (64 - (n))))
to this- #define SPH_T32(x) (as_uint(x))
- #define SPH_ROTL32(x, n) rotate(as_uint(x), as_uint(n))
- #define SPH_T64(x) (as_ulong(x))
- #define SPH_ROTL64(x, n) rotate(as_ulong(x), (n) & 0xFFFFFFFFFFFFFFFFUL)
It's work x11/x13 fine for me. Thanks to butcherette from http://club.dns-shop.ru/forum/search/?action=go_post&id=931006 thanks for the fix i took the liberty of uploading the file with the corrected x11mod.cl and x13mod.cl files: https://mega.co.nz/#!VYdChDTb!z22fJmx_rFoYg8sQecRwh9FEVWKP063PGN4XdeM22O8 As you can see the virus total matches the one in the OP here: https://bitcointalk.org/index.php?topic=623409. Although it has alot of hits :/ kinda scary: https://www.virustotal.com/en/file/0ce514a7c264ff8b2ab6dfaf9677e1df9539a398df6eeed46f466a2131ac6825/analysis/(first link is original copy in OP) https://www.virustotal.com/en/file/250513aa817824bdc80a5b2d0cfe370eaf4805a29e4cbf64450bb975d25bc91e/analysis/(second link is file provided in my upload ) Both same no additional files added, just changed the 2 lines in x11mod.cl and x13mod.cl.. If it had problems they were there before i touched it . Hope it helps I wish there was a way to know if it is truly clean! That's a lot of false positives!!!!!!!!!!!! best way is to compile yourself. (I will personally stop giving binaries... it takes 15min, to instal mingw and the necessary packages...) Now, miners are used in botnet so there will be always tagged as malware/virus... (now it is the case for all miners... )
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
BrewCrewFan
|
|
July 01, 2014, 11:18:18 PM |
|
I tried just now, It didn't help, still HW.
The problem with HW and driver v14.6(rc2) is solved. Just open files: x11mod.cl / x13mod.cl for sgminer v4.1.xx (darkcoin-mod.cl / marucoin-mod.cl - for sgminer v5) and replace each line, it at beginning of the file: - #define SPH_T32(x) ((x) & SPH_C32(0xFFFFFFFF))
- #define SPH_ROTL32(x, n) SPH_T32(((x) << (n)) | ((x) >> (32 - (n))))
- #define SPH_T64(x) ((x) & SPH_C64(0xFFFFFFFFFFFFFFFF))
- #define SPH_ROTL64(x, n) SPH_T64(((x) << (n)) | ((x) >> (64 - (n))))
to this- #define SPH_T32(x) (as_uint(x))
- #define SPH_ROTL32(x, n) rotate(as_uint(x), as_uint(n))
- #define SPH_T64(x) (as_ulong(x))
- #define SPH_ROTL64(x, n) rotate(as_ulong(x), (n) & 0xFFFFFFFFFFFFFFFFUL)
It's work x11/x13 fine for me. Thanks to butcherette from http://club.dns-shop.ru/forum/search/?action=go_post&id=931006 thanks for the fix i took the liberty of uploading the file with the corrected x11mod.cl and x13mod.cl files: https://mega.co.nz/#!VYdChDTb!z22fJmx_rFoYg8sQecRwh9FEVWKP063PGN4XdeM22O8 As you can see the virus total matches the one in the OP here: https://bitcointalk.org/index.php?topic=623409. Although it has alot of hits :/ kinda scary: https://www.virustotal.com/en/file/0ce514a7c264ff8b2ab6dfaf9677e1df9539a398df6eeed46f466a2131ac6825/analysis/(first link is original copy in OP) https://www.virustotal.com/en/file/250513aa817824bdc80a5b2d0cfe370eaf4805a29e4cbf64450bb975d25bc91e/analysis/(second link is file provided in my upload ) Both same no additional files added, just changed the 2 lines in x11mod.cl and x13mod.cl.. If it had problems they were there before i touched it . Hope it helps I wish there was a way to know if it is truly clean! That's a lot of false positives!!!!!!!!!!!! best way is to compile yourself. (I will personally stop giving binaries... it takes 15min, to instal mingw and the necessary packages...) Now, miners are used in botnet so there will be always tagged as malware/virus... (now it is the case for all miners... ) You make it sound so easy, but for someone who never had ever compiled, its far from it. I recall my first time doing so, my fast coin wallet, took a whole stinking day to do it. Its not as simple as click and install.... You want to be a real champ, should do a step by step DETAILED faq on how to compile this....
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 02, 2014, 12:17:41 AM |
|
I tried just now, It didn't help, still HW.
The problem with HW and driver v14.6(rc2) is solved. Just open files: x11mod.cl / x13mod.cl for sgminer v4.1.xx (darkcoin-mod.cl / marucoin-mod.cl - for sgminer v5) and replace each line, it at beginning of the file: - #define SPH_T32(x) ((x) & SPH_C32(0xFFFFFFFF))
- #define SPH_ROTL32(x, n) SPH_T32(((x) << (n)) | ((x) >> (32 - (n))))
- #define SPH_T64(x) ((x) & SPH_C64(0xFFFFFFFFFFFFFFFF))
- #define SPH_ROTL64(x, n) SPH_T64(((x) << (n)) | ((x) >> (64 - (n))))
to this- #define SPH_T32(x) (as_uint(x))
- #define SPH_ROTL32(x, n) rotate(as_uint(x), as_uint(n))
- #define SPH_T64(x) (as_ulong(x))
- #define SPH_ROTL64(x, n) rotate(as_ulong(x), (n) & 0xFFFFFFFFFFFFFFFFUL)
It's work x11/x13 fine for me. Thanks to butcherette from http://club.dns-shop.ru/forum/search/?action=go_post&id=931006 thanks for the fix i took the liberty of uploading the file with the corrected x11mod.cl and x13mod.cl files: https://mega.co.nz/#!VYdChDTb!z22fJmx_rFoYg8sQecRwh9FEVWKP063PGN4XdeM22O8 As you can see the virus total matches the one in the OP here: https://bitcointalk.org/index.php?topic=623409. Although it has alot of hits :/ kinda scary: https://www.virustotal.com/en/file/0ce514a7c264ff8b2ab6dfaf9677e1df9539a398df6eeed46f466a2131ac6825/analysis/(first link is original copy in OP) https://www.virustotal.com/en/file/250513aa817824bdc80a5b2d0cfe370eaf4805a29e4cbf64450bb975d25bc91e/analysis/(second link is file provided in my upload ) Both same no additional files added, just changed the 2 lines in x11mod.cl and x13mod.cl.. If it had problems they were there before i touched it . Hope it helps I wish there was a way to know if it is truly clean! That's a lot of false positives!!!!!!!!!!!! best way is to compile yourself. (I will personally stop giving binaries... it takes 15min, to instal mingw and the necessary packages...) Now, miners are used in botnet so there will be always tagged as malware/virus... (now it is the case for all miners... ) You make it sound so easy, but for someone who never had ever compiled, its far from it. I recall my first time doing so, my fast coin wallet, took a whole stinking day to do it. Its not as simple as click and install.... You want to be a real champ, should do a step by step DETAILED faq on how to compile this.... Actually the wallet was more complicated for me too... it took me some time to understand I had to use windows console (and not mingw shell) to compile the package and the wallet... (not mentioning all the compilation issues while building the wallet...) But for this there is already a file in doc directory "windows-built.txt" where every single step to build the environnement and compile sgminer are given... Last time I needed to remake a working mingw environnement it took about half an hour (mainly because of some network problem...). Actually, I saw in the latest sgminer version that they added support to visual studio, I will certainly move to that (easier than grep to find a reference to a function across the build... )
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
jedimindtriks
Member
Offline
Activity: 136
Merit: 10
|
|
July 05, 2014, 05:48:50 PM |
|
Damn, im getting only 5.5MH on nist5 using 280x.
this is my cfg.
am i doing something wrong?
"intensity" : "21,21,21,21,21,21", "worksize" : "256,256,256,256,256,256", "kernel" : "nist5,nist5,nist5,nist5,nist5,nist5", "lookup-gap" : "2,2,2,2,2,2", "thread-concurrency" : "8192,8192,8192,8192,8192,8192", "gpu-threads" : "4,4,4,4,4,4", "api-listen" : true, "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-only" : true, "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "1", "gpu-threads" : "2", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "shares" : "0", "kernel-path" : "/usr/local/bin", "api-allow" : "W:127.0.0.1"
|
|
|
|
herbaljoe
|
|
July 09, 2014, 02:33:29 AM |
|
Cool miner! X11 7950 - 3.7 Mhash/s 280x - 4.3 Mhash/s 270 - 2.5 Mhash/s
X15 7950 - 2.8 Mhash/s 280x - 3.2 Mhash/s 270 - 1.8 Mhash/s
Can it switch on fly to X11/X13/X15 algos? Can anybody list config file here?
How did you get X15 working with this release?
|
|
|
|
|